Attachment 152968 Details for Bug 235902 – Output from dmesg running from debian etch

Output from dmesg running from debian etch

dmesg.txt (text/plain), 11.97 KB, created by Patrick Hoffmann on 2007-04-18 23:43:02 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Patrick Hoffmann

Created: 2007-04-18 23:43:02 UTC

Size: 11.97 KB

patch

obsolete

>Linux version 2.6.18-4-686 (Debian 2.6.18.dfsg.1-12) (waldi@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 SMP Mon Mar 26 17:17:36 UTC 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>On node 0 totalpages: 262128
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 32752 pages, LIFO batch:7
>DMI 2.3 present.
>ACPI: RSDP (v000 AWARD                                 ) @ 0x000f7d90
>ACPI: RSDT (v001 AWARD  MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
>ACPI: FADT (v001 AWARD  MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
>ACPI: DSDT (v001 AWARD  AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
>Detected 1792.802 MHz processor.
>Built 1 zonelists.  Total pages: 262128
>Kernel command line: root=/dev/hda2 ro vga=791 
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1031116k/1048512k available (1544k kernel code, 16652k reserved, 577k data, 196k init, 131008k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3588.82 BogoMIPS (lpj=7177644)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 16k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0200 (from 0a20)
>CPU0: Intel(R) Pentium(R) 4 CPU 1.80GHz stepping 02
>SMP motherboard not detected.
>Brought up 1 CPUs
>migration_cost=0
>checking if image is initramfs... it is
>Freeing initrd memory: 4979k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb5a0, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Uncovering SIS961 that hid as a SIS503 (compatible=1)
>Enabling SiS 96x SMBus.
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>PnPBIOS: Disabled by ACPI PNP
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: c8000000-d7ffffff
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1176943200.180:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>vesafb: cannot reserve video memory at 0xc8000000
>vesafb: framebuffer at 0xc8000000, mapped to 0xf8880000, using 3072k, total 262144k
>vesafb: mode is 1024x768x16, linelength=2048, pages=169
>vesafb: protected mode interface info at c000:57ff
>vesafb: pmi: set display start = c00c5893, set palette = c00c58df
>vesafb: pmi: ports = c010 c016 c054 c038 c03c c05c c000 c004 c0b0 c0b2 c0b4 
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>NET: Registered protocol family 8
>NET: Registered protocol family 20
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 196k freed
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (35 C)
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>SIS5513: chipset revision 208
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 961 MuTIOL IDE UDMA100 controller
>    ide0: BM-DMA at 0x4000-0x4007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x4008-0x400f, BIOS settings: hdc:DMA, hdd:DMA
>Probing IDE interface ide0...
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hda: Maxtor 6Y120P0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVDRAM GSA-4040B, ATAPI CD/DVD-ROM drive
>hdd: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:02.2[D] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:02.2: OHCI Host Controller
>ohci_hcd 0000:00:02.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.2: irq 11, io mem 0xdb040000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:02.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>ohci_hcd 0000:00:02.3: OHCI Host Controller
>ohci_hcd 0000:00:02.3: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:02.3: irq 11, io mem 0xdb042000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>8139cp 0000:00:0f.0: This (id 10ec:8139 rev 10) is not an 8139C+ compatible chip
>8139cp 0000:00:0f.0: Try the "8139too" driver instead.
>8139too Fast Ethernet driver 0.9.27
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0f.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>eth0: RealTek RTL8139 at 0xe000, 00:10:dc:27:f3:ea, IRQ 11
>eth0:  Identified 8139 chip type 'RTL-8100'
>hda: max request size: 128KiB
>usb 1-1: new low speed USB device using ohci_hcd and address 2
>hda: 240121728 sectors (122942 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>hdc: ATAPI 32X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
>usb 1-1: configuration #1 chosen from 1 choice
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.2-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Attempting manual resume
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>ts: Compaq touchscreen protocol output
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x1080
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected SiS 645 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:02.7[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>input: PC Speaker as /class/input/input2
>intel8x0_measure_ac97_clock: measured 79039 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>Vortex: init.... <6>Intel 810 + AC97 Audio, version 1.01, 17:41:06 Mar 26 2007
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
>done.
>gameport: AU88x0 Gameport is pci0000:00:08.0/gameport0, speed 1169kHz
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>input: Analog 4-axis 4-button joystick as /class/input/input3
>Adding 498004k swap on /dev/hda3.  Priority:-1 extents:1 across:498004k
>EXT3 FS on hda2, internal journal
>loop: loaded (max 8 devices)
>device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>eth0: link up, 100Mbps, full-duplex, lpa 0x41E1
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>[drm] Initialized drm 1.0.1 20051102
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 235902: 152487 | 152852 | 152853 | 152966 | 152967 | 152968 | 152969 | 152986 | 153056 | 153057 | 154592 | 154608 | 155980 | 157394