Attachment 153055 Details for Bug 229704 – anaconda syslog

anaconda syslog

syslog (text/plain), 18.86 KB, created by Charles R. Anderson on 2007-04-19 20:09:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Charles R. Anderson

Created: 2007-04-19 20:09:51 UTC

Size: 18.86 KB

patch

obsolete

><5>Linux version 2.6.20-1.3088.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070403 (Red Hat 4.1.2-8)) #1 SMP Wed Apr 18 14:50:34 EDT 2007
><6>BIOS-provided physical RAM map:
><4>sanitize start
><4>sanitize end
><4>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
><4>copy_e820_map() type is E820_RAM
><4>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
><4>copy_e820_map() start: 00000000000e8400 size: 0000000000017c00 end: 0000000000100000 type: 2
><4>copy_e820_map() start: 0000000000100000 size: 0000000017ef0000 end: 0000000017ff0000 type: 1
><4>copy_e820_map() type is E820_RAM
><4>copy_e820_map() start: 0000000017ff0000 size: 000000000000fc00 end: 0000000017fffc00 type: 3
><4>copy_e820_map() start: 0000000017fffc00 size: 0000000000000400 end: 0000000018000000 type: 4
><4>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
><4> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000e8400 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
><4> BIOS-e820: 0000000017ff0000 - 0000000017fffc00 (ACPI data)
><4> BIOS-e820: 0000000017fffc00 - 0000000018000000 (ACPI NVS)
><4> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
><5>0MB HIGHMEM available.
><5>383MB LOWMEM available.
><4>Using x86 segment limits to approximate NX protection
><7>Entering add_active_range(0, 0, 98288) 0 entries of 256 used
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  Normal       4096 ->    98288
><4>  HighMem     98288 ->    98288
><4>early_node_map[1] active PFN ranges
><4>    0:        0 ->    98288
><7>On node 0 totalpages: 98288
><7>  DMA zone: 52 pages used for memmap
><7>  DMA zone: 0 pages reserved
><7>  DMA zone: 4044 pages, LIFO batch:0
><7>  Normal zone: 1195 pages used for memmap
><7>  Normal zone: 92997 pages, LIFO batch:31
><7>  HighMem zone: 0 pages used for memmap
><6>DMI 2.3 present.
><6>Using APIC driver default
><4>ACPI: RSDP 000F6770, 0014 (r0 HP-MCD)
><4>ACPI: RSDT 17FF59B8, 002C (r1 HP-MCD EA RSDT   1820000  LTP        0)
><4>ACPI: FACP 17FFFB65, 0074 (r1 HP-MCD EA FACP   1820000 HP    1000000)
><4>ACPI: DSDT 17FF59E4, A181 (r1 HP-MCD EA DSDT   1820000 MSFT  100000B)
><4>ACPI: FACS 17FFFFC0, 0040
><4>ACPI: BOOT 17FFFBD9, 0027 (r1 PTLTD  EABFTBL$  1820000  LTP        1)
><6>ACPI: PM-Timer IO Port: 0x8008
><4>Allocating PCI resources starting at 20000000 (gap: 18000000:e7f80000)
><4>Built 1 zonelists.  Total pages: 97041
><5>Kernel command line: graphical askmethod
><6>Local APIC disabled by BIOS -- you can enable it with "lapic"
><7>mapped APIC to ffffd000 (014ee000)
><6>Enabling fast FPU save and restore... done.
><6>Enabling unmasked SIMD FPU exception support... done.
><6>Initializing CPU#0
><4>CPU 0 irqstacks, hard=c0792000 soft=c0772000
><4>PID hash table entries: 2048 (order: 11, 8192 bytes)
><4>Detected 597.433 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
><4>... MAX_LOCKDEP_SUBCLASSES:    8
><4>... MAX_LOCK_DEPTH:          30
><4>... MAX_LOCKDEP_KEYS:        2048
><4>... CLASSHASH_SIZE:           1024
><4>... MAX_LOCKDEP_ENTRIES:     8192
><4>... MAX_LOCKDEP_CHAINS:      16384
><4>... CHAINHASH_SIZE:          8192
><4> memory used by lock dependency info: 1096 kB
><4> per task-struct memory footprint: 1200 bytes
><4>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
><4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
><6>Memory: 374876k/393152k available (2126k kernel code, 17596k reserved, 1117k data, 244k init, 0k highmem)
><4>virtual kernel memory layout:
><4>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
><4>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
><4>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
><4>    lowmem  : 0xc0000000 - 0xd7ff0000   ( 383 MB)
><4>      .init : 0xc0730000 - 0xc076d000   ( 244 kB)
><4>      .data : 0xc0613883 - 0xc072acb4   (1117 kB)
><4>      .text : 0xc0400000 - 0xc0613883   (2126 kB)
><4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
><4>Calibrating delay using timer specific routine.. 1196.29 BogoMIPS (lpj=598149)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 512
><7>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
><6>CPU: L1 I cache: 16K, L1 D cache: 16K
><6>CPU: L2 cache: 256K
><7>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
><6>Intel machine check architecture supported.
><6>Intel machine check reporting enabled on CPU#0.
><6>Checking 'hlt' instruction... OK.
><6>SMP alternatives: switching to UP code
><6>Freeing SMP alternatives: 12k freed
><6>ACPI: Core revision 20070126
><4>ACPI: setting ELCR to 0200 (from 0420)
><4>CPU0: Intel Pentium III (Coppermine) stepping 03
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=52 bytes
><7>sizeof(inode)=564 bytes
><7>sizeof(dentry)=156 bytes
><7>sizeof(ext3inode)=800 bytes
><7>sizeof(buffer_head)=56 bytes
><7>sizeof(skbuff)=176 bytes
><7>sizeof(task_struct)=2704 bytes
><4>Time: 15:21:11  Date: 03/19/107
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd980, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S1 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>0000:00:07.1: cannot adjust BAR0 (not I/O)
><4>0000:00:07.1: cannot adjust BAR1 (not I/O)
><4>0000:00:07.1: cannot adjust BAR2 (not I/O)
><4>0000:00:07.1: cannot adjust BAR3 (not I/O)
><4>PCI quirk: region 8000-803f claimed by PIIX4 ACPI
><4>PCI quirk: region 2180-218f claimed by PIIX4 SMB
><4>PIIX4 devres E PIO at 0378-037f
><4>PIIX4 devres I PIO at 0398-0399
><7>Boot video device is 0000:01:00.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs *5 6)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs *10)
><6>ACPI: Power Resource [PFAN] (off)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 12 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>Time: tsc clocksource has been installed.
><6>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
><6>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
><6>pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
><6>pnp: 00:00: iomem range 0xcc000-0xcffff could not be reserved
><6>PCI: Bridge: 0000:00:01.0
><6>  IO window: 9000-9fff
><6>  MEM window: f4100000-f5ffffff
><6>  PREFETCH window: 30000000-300fffff
><4>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
><4>  IO window: 00002000-000020ff
><4>  IO window: 00002400-000024ff
><4>  PREFETCH window: 20000000-23ffffff
><4>  MEM window: 24000000-27ffffff
><4>PCI: Bus 6, cardbus bridge: 0000:00:0a.1
><4>  IO window: 00002800-000028ff
><4>  IO window: 00002c00-00002cff
><4>  PREFETCH window: 28000000-2bffffff
><4>  MEM window: 2c000000-2fffffff
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
><7>PCI: setting IRQ 10 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:0a.0 to 64
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
><7>PCI: Setting latency timer of device 0000:00:0a.1 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
><4>TCP established hash table entries: 16384 (order: 7, 589824 bytes)
><4>TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
><6>TCP: Hash tables configured (established 16384 bind 16384)
><6>TCP reno registered
><6>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
><4> it is
><6>Freeing initrd memory: 5643k freed
><6>Simple Boot Flag at 0x36 set to 0x1
><6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
><5>apm: overridden by ACPI.
><6>audit: initializing netlink socket (disabled)
><5>audit(1176996072.432:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key 2FDFBEBD17048F01
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>Limiting direct PCI/PCI transfers.
><4>ACPI: Transitioning device [FAN] to D3
><4>ACPI: Transitioning device [FAN] to D3
><6>ACPI: Fan [FAN] (off)
><6>ACPI: CPU0 (power states: C1[C1] C2[C2])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>Time: acpi_pm clocksource has been installed.
><6>ACPI: Thermal Zone [THRM] (53 C)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>agpgart: Detected an Intel 440BX Chipset.
><6>agpgart: AGP aperture is 64M @ 0xf8000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>Clocksource tsc unstable (delta = -206216783 ns)
><6>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><6>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>Yenta: CardBus bridge found at 0000:00:0a.0 [103c:0010]
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:0a.0, mfunc 0x012c1272, devctl 0x66
><6>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
><6>Socket status: 30000006
><6>Yenta: CardBus bridge found at 0000:00:0a.1 [103c:0010]
><6>Yenta: Using INTVAL to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:0a.1, mfunc 0x012c1272, devctl 0x66
><6>Yenta: ISA IRQ mask 0x08b8, PCI irq 10
><6>Socket status: 30000006
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><4>  Magic number: 3:827:386
><6>Freeing unused kernel memory: 244k freed
><4>Write protecting the kernel read-only data: 826k
><6>Synaptics Touchpad, model: 1, fw: 5.4, id: 0x9b54b1, caps: 0x844793/0x0
><6>serio: Synaptics pass-through port at isa0060/serio1/input0
><6>input: SynPS/2 Synaptics TouchPad as /class/input/input2
><6>loop: loaded (max 8 devices)
><6>Floppy drive(s): fd0 is 1.44M
><6>FDC 0 is a National Semiconductor PC87306
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>USB Universal Host Controller Interface driver v3.0
><4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
><6>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
><6>uhci_hcd 0000:00:07.2: UHCI Host Controller
><6>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
><6>uhci_hcd 0000:00:07.2: irq 10, io base 0x00001c00
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><6>IBM TrackPoint firmware: 0x0b, buttons: 2/3
><6>input: TPPS/2 IBM TrackPoint as /class/input/input4
><6>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
><6>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f 0x398-0x39f
><6>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
><4>3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
><6>0000:00:0b.0: 3Com PCI 3c556 Laptop Tornado at d8876400.
><7>libata version 2.20 loaded.
><7>ata_piix 0000:00:07.1: version 2.10ac1
><6>ata1: PATA max UDMA/33 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011c20 irq 14
><6>ata2: PATA max UDMA/33 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011c28 irq 15
><6>scsi0 : ata_piix
><6>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
><6>ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
><6>ata1.00: 78140160 sectors, multi 16: LBA 
><6>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
><6>ata1.00: configured for UDMA/33
><6>scsi1 : ata_piix
><6>ata2.00: ATAPI, max UDMA/33
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
><5>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda: sda1 sda2 sda3 sda4 < sda5 >
><5>sd 0:0:0:0: Attached scsi disk sda
><5>scsi 1:0:0:0: CD-ROM            TEAC     CD-224E          1.6A PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><6>eth0:  setting full-duplex.
><7>eth0: no IPv6 routers present
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>security:  3 users, 6 roles, 1798 types, 76 bools, 1 sens, 1024 cats
><7>security:  60 classes, 64845 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1176997883.530:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: pIII_sse
><4>   pIII_sse  :  1188.000 MB/sec
><4>raid5: using function: pIII_sse (1188.000 MB/sec)
><4>raid6: int32x1    171 MB/s
><4>raid6: int32x2    167 MB/s
><4>raid6: int32x4    175 MB/s
><4>raid6: int32x8    171 MB/s
><4>raid6: mmxx1      535 MB/s
><4>raid6: mmxx2      675 MB/s
><4>raid6: sse1x1     472 MB/s
><4>raid6: sse1x2     632 MB/s
><4>raid6: using algorithm sse1x2 (632 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><4>GFS2 (built Apr 18 2007 14:52:52) installed
><6>Lock_Nolock (built Apr 18 2007 14:53:09) installed
><6>JFS: nTxBlock = 2977, nTxLock = 23817
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1176997898.528:3): audit_pid=602 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on dm-0, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev dm-0, type ext3), uses xattr
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3 FS on sda3, internal journal
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda3, type ext3), uses xattr
><6>Adding 786424k swap on /dev/q/swap.  Priority:-1 extents:1 across:786424k

Actions: View

Attachments on bug 229704: 148626 | 153054 | 153055