Attachment 153077 Details for Bug 224680 – bootlog of 2.6.20-1.2944 with pci=conf1 (no change)

bootlog of 2.6.20-1.2944 with pci=conf1 (no change)

bootlog-pci-conf1.txt (text/plain), 20.91 KB, created by George Shearer on 2007-04-19 22:53:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: George Shearer

Created: 2007-04-19 22:53:41 UTC

Size: 20.91 KB

patch

obsolete

>root (hd0,0)
> Filesystem type is ext2fs, partition type 0x83
>kernel /boot/vmlinuz-2.6.20-1.2944.fc6 ro root=LABEL=/ agp=off pci=conf1 consol
>e=ttyS0,115200n8
>   [Linux-bzImage, setup=0x1e00, size=0x1e24f4]
>initrd /boot/initrd-2.6.20-1.2944.fc6.img
>   [Linux-initrd @ 0x37e7c000, 0x173b3c bytes]
>
>Linux version 2.6.20-1.2944.fc6 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.1 2007010
>5 (Red Hat 4.1.1-51)) #1 SMP Tue Apr 10 18:46:45 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 00000000cfde0000 end: 00000000cfee0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000cfee0000 size: 0000000000003000 end: 00000000cfee3000 type: 4
>copy_e820_map() start: 00000000cfee3000 size: 000000000000d000 end: 00000000cfef0000 type: 3
>copy_e820_map() start: 00000000cfef0000 size: 0000000000010000 end: 00000000cff00000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000004000000 end: 00000000e4000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
>copy_e820_map() start: 0000000100000000 size: 0000000030000000 end: 0000000130000000 type: 1
>copy_e820_map() type is E820_RAM
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Warning only 4GB will be used.
>Use a PAE enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5360
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->  1048576
>early_node_map[1] active PFN ranges
>    0:        0 ->  1048576
>DMI 2.4 present.
>Using APIC driver default
>ACPI: PM-Timer IO Port: 0x408
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000)
>Detected 3200.196 MHz processor.
>Built 1 zonelists.  Total pages: 1038336
>Kernel command line: ro root=LABEL=/ agp=off pci=conf1 console=ttyS0,115200n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3357604k/4194304k available (2189k kernel code, 47788k reserved, 1159k data, 236k init, 2489
>216k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623649 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc0623649   (2189 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 6403.27 BogoMIPS (lpj=3201639)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ac000 soft=c078c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6399.97 BogoMIPS (lpj=3199988)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6400  @ 2.13GHz stepping 06
>Total of 2 processors activated (12803.25 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=10
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>0000:05:00.0: cannot adjust BAR2 (not I/O)
>0000:05:00.0: cannot adjust BAR3 (not I/O)
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: f2000000-f4ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 6000-6fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: f5000000-f50fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f5000000-f50fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 7000-8fff
>  MEM window: f5100000-f51fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: 9000-9fff
>  MEM window: f0000000-f1ffffff
>  PREFETCH window: f5300000-f53fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: e4000000-efffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1486k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1177007896.734:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 93BB43D45D46D1B4
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI: Processor [CPU1] (supports 2 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>jmicron_init_one: device = 2363, driver_data = 1
>JMB363: IDE controller at PCI slot 0000:05:00.0
>PCI: Device 0000:05:00.0 not available because of resource 2 collisions
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 18
>JMB363: BIOS configuration fixed.
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 18
>JMB363: dma_base is invalid
>ide0: JMB363 Bus-Master DMA disabled (BIOS)
>JMB363: dma_base is invalid
>ide1: JMB363 Bus-Master DMA disabled (BIOS)
>jmicron_init_one: device = 2363, driver_data = 1
>JMB363: IDE controller at PCI slot 0000:05:00.1
>PCI: Enabling device 0000:05:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 16 (level, low) -> IRQ 16
>JMB363: chipset revision 2
>JMB363: 100% native mode on irq 16
>    ide2: BM-DMA at 0x8000-0x8007, BIOS settings: hde:DMA, hdf:pio
>    ide3: BM-DMA at 0x8008-0x800f, BIOS settings: hdg:DMA, hdh:pio
>hde: ASUS CD-S520/A4, ATAPI CD/DVD-ROM drive
>hde: hw_config=0000
>hde: hw_config=0000
>ide2 at 0x7000-0x7007,0x7402 on irq 16
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: tsc clocksource has been installed.
> S0 S1 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Red Hat nash version 5.1.19.0.3 starting
>Mountifirmware_class: attempt to set timeout to 10
>ng proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.kUSB Universal Host Controller Interface driver v3.0
>o module
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000a400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000a800
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000ac00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000b000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>Loading ohci-hcd.ko module
>Loading ehci-hcd.ko module
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 21
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: irq 21, io mem 0xf5201000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf5200000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading ata_piix.ko module
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 18
>ata1: SATA max UDMA/133 cmd 0xB400 ctl 0xB802 bmdma 0xC400 irq 18
>ata2: SATA max UDMA/133 cmd 0xBC00 ctl 0xC002 bmdma 0xC408 irq 18
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 398294975 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ATA-7, max UDMA/133, 398294975 sectors: LBA48 NCQ (depth 0/32)
>ata2.00: ata2: dev 0 multi count 16
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BACE PQ: 0 ANSI: 5
>SCSI device sda: 398294975 512-byte hdwr sectors (203927 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 398294975 512-byte hdwr sectors (203927 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>SCSI device sdb: 398294975 512-byte hdwr sectors (203927 MB)
>sdb: Write Protect is off
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 398294975 512-byte hdwr sectors (203927 MB)
>sdb: Write Protect is off
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 1:0:0:0: Attached scsi disk sdb
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 18
>ata3: SATA max UDMA/133 cmd 0xD000 ctl 0xD402 bmdma 0xE000 irq 18
>ata4: SATA max UDMA/133 cmd 0xD800 ctl 0xDC02 bmdma 0xE008 irq 18
>scsi2 : ata_piix
>usb 5-1: new full speed USB device using uhci_hcd and address 3
>ata3.00: ATA-7, max UDMA/133, 398297088 sectors: LBA48 NCQ (depth 0/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : ata_piix
>usb 5-1: configuration #1 chosen from 1 choice
>ata4.00: ATA-7, max UDMA/133, 398297088 sectors: LBA48 NCQ (depth 0/32)
>ata4.00: ata4: dev 0 multi count 16
>ata4.00: configured for UDMA/133
>scsi 2:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB)
>sdc: Write Protect is off
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 398297088 512-byte hdwr sectors (203928 MB)
>sdc: Write Protect is off
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 2:0:0:0: Attached scsi disk sdc
>scsi 3:0:0:0: Direct-Access     ATA      Maxtor 6L200M0   BANC PQ: 0 ANSI: 5
>SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB)
>sdd: Write Protect is off
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdd: 398297088 512-byte hdwr sectors (203928 MB)
>sdd: Write Protect is off
>SCSI device sdd: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdd: sdd1
>sd 3:0:0:0: Attached scsi disk sdd
>Trying to resume from LABEL=SWAP-sdb1
>usb 5-2: new full speed USB device using uhci_hcd and address 4
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>usb 5-2: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1177007904.621:2): selinux=0 auid=4294967295
>INIT: version 2.86 booting
>                Welcome to Fedora Core
>                Press 'I' to enter interactive startup.
>Setting clock  (localtime): Thu Apr 19 18:38:28 EDT 2007 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname dfs.dh.lame.org:  [  OK  ]
>mdadm: error opening /dev/md1: No such file or directory
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda1
>/: clean, 137314/2560864 files, 1591298/2560351 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 2
>Entering non-interactive startup
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  [  OK  ]
>Starting syslog-ng: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting sshd: [  OK  ]
>Starting ntpd: [  OK  ]
>Registering binary handler for Windows applicationscannot (un)set powersave mode

Actions: View

Attachments on bug 224680: 151184 | 153069 | 153075 | 153076 | 153077 | 153078