Attachment 153199 Details for Bug 237296 – dmesg output

dmesg output

dmesg.txt (text/plain), 27.83 KB, created by Daniel Johansson on 2007-04-20 17:34:26 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Johansson

Created: 2007-04-20 17:34:26 UTC

Size: 27.83 KB

patch

obsolete

>Linux version 2.6.20.7 (root@localhost.localdomain) (gcc version 4.1.1 20061011 (Red Hat 4.1.1-30)) #1 SMP Sat Apr 14 18:10:51 CEST 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e2000 size: 000000000001e000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003feb0000 end: 000000003ffb0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003ffb0000 size: 0000000000010000 end: 000000003ffc0000 type: 3
>copy_e820_map() start: 000000003ffc0000 size: 0000000000030000 end: 000000003fff0000 type: 4
>copy_e820_map() start: 000000003fff0000 size: 0000000000010000 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff780000 size: 0000000000880000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e2000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ffb0000 (usable)
> BIOS-e820: 000000003ffb0000 - 000000003ffc0000 (ACPI data)
> BIOS-e820: 000000003ffc0000 - 000000003fff0000 (ACPI NVS)
> BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Entering add_active_range(0, 0, 262064) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262064
>early_node_map[1] active PFN ranges
>    0:        0 ->   262064
>On node 0 totalpages: 262064
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 319 pages used for memmap
>  HighMem zone: 32369 pages, LIFO batch:7
>DMI present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f7df0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x12000611 MSFT 0x00000097) @ 0x3ffb0000
>ACPI: FADT (v002 A M I  OEMFACP  0x12000611 MSFT 0x00000097) @ 0x3ffb0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x12000611 MSFT 0x00000097) @ 0x3ffb0390
>ACPI: MCFG (v001 A M I  OEMMCFG  0x12000611 MSFT 0x00000097) @ 0x3ffb0410
>ACPI: OEMB (v001 A M I  AMI_OEM  0x12000611 MSFT 0x00000097) @ 0x3ffc0040
>ACPI: DSDT (v001  75D8U 75D8U000 0x00000000 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x03] address[0xfecc0000] gsi_base[24])
>IOAPIC[1]: apic_id 3, version 3, address 0xfecc0000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:bee00000)
>Detected 1862.885 MHz processor.
>Built 1 zonelists.  Total pages: 259505
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fecc0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0783000 soft=c0763000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1030656k/1048256k available (2094k kernel code, 16808k reserved, 1102k data, 228k init, 130752k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc57000 - 0xfffff000   (3744 kB)
>    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
>    vmalloc : 0xf8800000 - 0xff9fe000   ( 113 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0725000 - 0xc075e000   ( 228 kB)
>      .data : 0xc060bb19 - 0xc071f494   (1102 kB)
>      .text : 0xc0400000 - 0xc060bb19   (2094 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3726.63 BogoMIPS (lpj=1863317)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0784000 soft=c0764000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3724.92 BogoMIPS (lpj=1862460)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6300  @ 1.86GHz stepping 02
>Total of 2 processors activated (7451.55 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>migration_cost=73
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=128
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:0f.1: cannot adjust BAR0 (not I/O)
>0000:00:0f.1: cannot adjust BAR1 (not I/O)
>0000:00:0f.1: cannot adjust BAR2 (not I/O)
>0000:00:0f.1: cannot adjust BAR3 (not I/O)
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NBPG._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT]
>ACPI: PCI Root Bridge [PCI1] (0000:80)
>PCI: Probing PCI hardware (bus 80)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fa800000-fe8fffff
>  PREFETCH window: bff00000-dfefffff
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: fe900000-fe9fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 27 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1484k freed
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1176940189.044:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node c1af889c), AE_BAD_HEADER
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node c1af87fc), AE_BAD_HEADER
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected VIA PT880 Ultra chipset
>agpgart: AGP aperture is 128M @ 0xf0000000
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:0f.1
>VP_IDE: chipset revision 7
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt8237a (rev 00) IDE UDMA133 controller on pci0000:00:0f.1
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: LITE-ON DVDRW SHM-165P6S, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 228k freed
>Write protecting the kernel read-only data: 799k
>Time: tsc clocksource has been installed.
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 20 (level, low) -> IRQ 17
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 17, io base 0x0000e080
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 22 (level, low) -> IRQ 18
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 18, io base 0x0000e400
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 19
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 19, io base 0x0000e480
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 23 (level, low) -> IRQ 20
>uhci_hcd 0000:00:10.3: UHCI Host Controller
>uhci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:10.3: irq 20, io base 0x0000ec00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:10.4[C] -> GSI 21 (level, low) -> IRQ 19
>ehci_hcd 0000:00:10.4: EHCI Host Controller
>ehci_hcd 0000:00:10.4: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:10.4: irq 19, io mem 0xfebff800
>ehci_hcd 0000:00:10.4: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_via 0000:00:0f.0: version 2.0
>ACPI: PCI Interrupt 0000:00:0f.0[B] -> GSI 21 (level, low) -> IRQ 19
>sata_via 0000:00:0f.0: routed to hard irq line 10
>ata1: SATA max UDMA/133 cmd 0xE000 ctl 0xDC02 bmdma 0xD480 irq 19
>ata2: SATA max UDMA/133 cmd 0xD880 ctl 0xD802 bmdma 0xD488 irq 19
>scsi0 : sata_via
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 1-1: device not accepting address 2, error -71
>ATA: abnormal status 0x7F on port 0xE007
>ATA: abnormal status 0x7F on port 0xE007
>ata1.00: ATA-7, max UDMA/133, 490234752 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_via
>ata2: SATA link down 1.5 Gbps (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0xD887
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 7Y250M0   YAR5 PQ: 0 ANSI: 5
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 < sda5 sda6 > sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1176940193.967:2): selinux=0 auid=4294967295
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>hub 5-1:1.0: USB hub found
>hub 5-1:1.0: 4 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 2 ports detected
>usb 2-1.1: new low speed USB device using uhci_hcd and address 3
>usb 2-1.1: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input2
>input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:10.1-1.1
>input: Logitech USB Receiver as /class/input/input3
>input,hiddev96: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:10.1-1.1
>input: PC Speaker as /class/input/input4
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<6>hda: hw_config=4101
>, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>via-rhine.c:v1.10-LK1.4.2 Sept-11-2006 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 20
>eth0: VIA Rhine II at 0xfebffc00, 00:19:66:0b:3d:a9, IRQ 20.
>eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link 45e1.
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>Linux video capture interface: v2.00
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 21
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>ACPI: PCI Interrupt 0000:80:01.0[A] -> GSI 17 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:80:01.0 to 64
>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
>bttv: driver version 0.9.16 loaded
>bttv: using 8 buffers with 2080k (520 pages) each for capture
>bttv: Bt8xx card found (0).
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> GSI 16 (level, low) -> IRQ 21
>bttv0: Bt878 (rev 17) at 0000:00:0c.0, irq: 21, latency: 32, mmio: 0xdfffe000
>bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
>bttv0: using: Pinnacle PCTV Studio/Rave [card=39,autodetected]
>bttv0: gpio: en=00000000, out=00000000 in=00fffbff [init]
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>bttv0: pinnacle/mt: id=2 info="PAL+SECAM / stereo" radio=yes
>bttv0: using tuner=33
>bttv0: i2c: checking for MSP34xx @ 0x80... found
>msp3400 1-0040: MSP3410G-B11 found @ 0x80 (bt878 #0 [sw])
>msp3400 1-0040: MSP3410G-B11 supports nicam and radio, mode is autodetect and autoselect
>bttv0: i2c: checking for TDA9875 @ 0xb0... not found
>bttv0: i2c: checking for TDA7432 @ 0x8a... not found
>tuner 1-004b: chip found @ 0x96 (bt878 #0 [sw])
>tda9887 1-004b: tda988[5/6/7] found @ 0x4b (tuner)
>tuner 1-0060: Chip ID is not zero. It is not a TEA5767
>tuner 1-0060: chip found @ 0xc0 (bt878 #0 [sw])
>tuner 1-0060: microtune: companycode=3cbf part=42 rev=2f
>tuner 1-0060: microtune MT2050 found, OK
>tuner 1-0060: microtune: companycode=3cbf part=42 rev=2f
>tuner 1-0060: microtune MT2050 found, OK
>bttv0: registered device video0
>bttv0: registered device vbi0
>bttv0: registered device radio0
>bt878: Unknown symbol bttv_read_gpio
>bt878: Unknown symbol bttv_write_gpio
>bt878: Unknown symbol bttv_gpio_enable
>bttv0: PLL: 28636363 => 35468950 .. ok
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda4, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1140604k swap on /dev/sda3.  Priority:-1 extents:1 across:1140604k
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8189 buckets, 65512 max)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.base_reachable_time; Use net.ipv6.neigh.lo.base_reachable_time_ms instead.
>eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c0465e92>] cache_alloc_refill+0x164/0x468
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c0465e92>] cache_alloc_refill+0x164/0x468
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c0465e92>] cache_alloc_refill+0x164/0x468
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c0429b31>] lock_timer_base+0x15/0x2f
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c0465e92>] cache_alloc_refill+0x164/0x468
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c0429b31>] lock_timer_base+0x15/0x2f
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c0465e92>] cache_alloc_refill+0x164/0x468
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c0429b31>] lock_timer_base+0x15/0x2f
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c0432649>] autoremove_wake_function+0x0/0x35
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c0429b31>] lock_timer_base+0x15/0x2f
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c0432649>] autoremove_wake_function+0x0/0x35
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>BUG: at drivers/hid/hid-core.c:780 implement()
> [<c0599e27>] hid_output_report+0x20f/0x2ba
> [<c0429b31>] lock_timer_base+0x15/0x2f
> [<c057dafa>] hid_submit_ctrl+0x55/0x1c8
> [<c057ddab>] usbhid_submit_report+0x13e/0x169
> [<c0432649>] autoremove_wake_function+0x0/0x35
> [<c057f9d7>] hiddev_ioctl+0x367/0x8dc
> [<c057d7e9>] hid_start_in+0x61/0x67
> [<c057df0a>] usbhid_open+0xe/0x1d
> [<c0468351>] nameidata_to_filp+0x24/0x33
> [<c04738e4>] do_ioctl+0x4c/0x62
> [<c0473b3e>] vfs_ioctl+0x244/0x256
> [<c0473b9c>] sys_ioctl+0x4c/0x64
> [<c0402d6a>] sysenter_past_esp+0x5f/0x85
> [<c0600033>] unix_stream_recvmsg+0x32d/0x4bb
> =======================
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>usb 2-1.2: new full speed USB device using uhci_hcd and address 4
>usb 2-1.2: configuration #1 chosen from 1 choice
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>eth0: no IPv6 routers present
>input: Bluetooth HID Boot Protocol Device as /class/input/input7
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>         res 51/04:00:0b:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>ata1.00: configured for UDMA/133
>ata1: EH complete
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 490234752 512-byte hdwr sectors (251000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>input: Bluetooth HID Boot Protocol Device as /class/input/input8
>hda-intel: Invalid position buffer, using LPIB read method instead.

Actions: View

Attachments on bug 237296: 153199