Attachment 153240 Details for Bug 237376 – Output from dmesg

Output from dmesg

dmesg.txt (text/plain), 25.28 KB, created by Gerald Cox on 2007-04-21 15:33:53 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gerald Cox

Created: 2007-04-21 15:33:53 UTC

Size: 25.28 KB

patch

obsolete

>Linux version 2.6.20-1.3094.fc7 (brewbuilder@hs20-bc2-2.build.redhat.com) (gcc version 4.1.2 20070418 (Red Hat 4.1.2-9)) #1 SMP Thu Apr 19 11:13:39 EDT 2007
>Command line: ro root=LABEL=/1 noapic rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000d8000000 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000F68C0, 0014 (r0 GBT   )
>ACPI: RSDT 7FFF3000, 0034 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: FACP 7FFF3040, 0074 (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: DSDT 7FFF30C0, 50CB (r1 GBT    NVDAACPI     1000 MSFT  100000C)
>ACPI: FACS 7FFF0000, 0040
>ACPI: SSDT 7FFF8240, 028A (r1 PTLTD  POWERNOW        1  LTP        1)
>ACPI: MCFG 7FFF8500, 003C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>ACPI: APIC 7FFF81C0, 007C (r1 GBT    NVDAACPI 42302E31 NVDA  1010101)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007fff0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524272) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007fff0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524272
>On node 0 totalpages: 524175
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2365 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11175 pages used for memmap
>  DMA32 zone: 509001 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Using ACPI for processor (LAPIC) configuration information
>Intel MultiProcessor Specification v1.4
>MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
>I/O APIC #2 at 0xFEC00000.
>Setting APIC routing to physical flat
>Processors: 2
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:58000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510547
>Kernel command line: ro root=LABEL=/1 noapic rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2612.048 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 6f98000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2035536k/2097088k available (2465k kernel code, 61164k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 5226.98 BogoMIPS (lpj=2613494)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 8ca0)
>Using local APIC timer interrupts.
>result 12557941
>Detected 12.557 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>spurious 8259A interrupt: IRQ7.
>Calibrating delay using timer specific routine.. 5230.94 BogoMIPS (lpj=2615470)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=379
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>0000:00:0c.0: cannot adjust BAR0 (not I/O)
>0000:00:0c.0: cannot adjust BAR1 (not I/O)
>0000:00:0c.0: cannot adjust BAR2 (not I/O)
>0000:00:0c.0: cannot adjust BAR3 (not I/O)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:0e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 *15)
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSA2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:09: iomem range 0xd8000000-0xdfffffff could not be reserved
>pnp: 00:0a: iomem range 0xd0000-0xd3fff has been reserved
>pnp: 00:0a: iomem range 0xd8c00-0xdbfff has been reserved
>pnp: 00:0a: iomem range 0xf0000-0xfbfff could not be reserved
>pnp: 00:0a: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: 9000-9fff
>  MEM window: f1000000-f2ffffff
>  PREFETCH window: e0000000-e7ffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: a000-afff
>  MEM window: ea000000-eeffffff
>Time: acpi_pm clocksource has been installed.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:12.0
>  IO window: b000-bfff
>  MEM window: ef000000-f0ffffff
>  PREFETCH window: e8000000-e9ffffff
>PCI: Bridge: 0000:00:15.0
>  IO window: c000-dfff
>  MEM window: f3000000-f30fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3225k freed
>audit: initializing netlink socket (disabled)
>audit(1177166171.293:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 5BEB927B766F63C1
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:12.0:pcie00]
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:15.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0x12 (2600 MHz), vid 0xa
>powernow-k8:    1 : fid 0x10 (2400 MHz), vid 0xc
>powernow-k8:    2 : fid 0xe (2200 MHz), vid 0xe
>powernow-k8:    3 : fid 0xc (2000 MHz), vid 0x10
>powernow-k8:    4 : fid 0xa (1800 MHz), vid 0x10
>powernow-k8:    5 : fid 0x2 (1000 MHz), vid 0x12
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0a.0: irq 5, io mem 0xf3103000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0a.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
>ehci_hcd 0000:00:0a.1: irq 10, io mem 0xf3102000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>3ware 9000 Storage Controller device driver for Linux v2.26.02.008.
>ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNK7] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>scsi0 : 3ware 9000 Storage Controller
>3w-9xxx: scsi0: Found a 3ware 9000 Storage Controller at 0xf0000000, IRQ: 11.
>usb 2-7: new high speed USB device using ehci_hcd and address 2
>3w-9xxx: scsi0: Firmware FE9X 3.08.00.004, BIOS BE9X 3.08.00.002, Ports: 12.
>scsi 0:0:0:0: Direct-Access     AMCC     9650SE-12M DISK  3.08 PQ: 0 ANSI: 5
>scsi 0:0:0:1: Direct-Access     AMCC     9650SE-12M DISK  3.08 PQ: 0 ANSI: 5
>scsi 0:0:0:2: Direct-Access     AMCC     9650SE-12M DISK  3.08 PQ: 0 ANSI: 5
>usb 2-7: configuration #1 chosen from 1 choice
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>libusual: modprobe for usb-storage succeeded, but module is not present
>SCSI device sda: 209715199 512-byte hdwr sectors (107374 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>libata version 2.20 loaded.
>SCSI device sda: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
>SCSI device sda: 209715199 512-byte hdwr sectors (107374 MB)
>sda: Write Protect is off
>sda: Mode Sense: 23 00 00 00
>SCSI device sda: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3
>PCI: Enabling device 0000:04:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 5
>ACPI: PCI Interrupt 0000:04:00.1[B] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:04:00.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000000000001c000 ctl 0x000000000001c402 bmdma 0x000000000001d000 irq 5
>ata2: PATA max UDMA/100 cmd 0x000000000001c800 ctl 0x000000000001cc02 bmdma 0x000000000001d008 irq 5
>scsi1 : pata_jmicron
>sd 0:0:0:0: Attached scsi disk sda
>SCSI device sdb: 4294967295 512-byte hdwr sectors (2199023 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
>SCSI device sdb: 4294967295 512-byte hdwr sectors (2199023 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 23 00 00 00
>SCSI device sdb: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 0:0:0:1: Attached scsi disk sdb
>SCSI device sdc: 1745096706 512-byte hdwr sectors (893490 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
>SCSI device sdc: 1745096706 512-byte hdwr sectors (893490 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 23 00 00 00
>SCSI device sdc: write cache: enabled, read cache: disabled, doesn't support DPO or FUA
> sdc: sdc1
>sd 0:0:0:2: Attached scsi disk sdc
>scsi2 : pata_jmicron
>ATA: abnormal status 0x7F on port 0x000000000001c807
>usb 1-8: new low speed USB device using ohci_hcd and address 2
>usb 1-8: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0a.0-8
>usb 1-10: new full speed USB device using ohci_hcd and address 3
>usb 1-10: configuration #1 chosen from 1 choice
>RocketRAID 3xxx SATA Controller driver v1.0 (060426)
>pata_amd 0000:00:0c.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>ata3: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f000 irq 14
>ata4: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f008 irq 15
>scsi3 : pata_amd
>ata3.00: ATAPI, max UDMA/66
>ata3.00: configured for UDMA/66
>scsi4 : pata_amd
>ata4: port disabled. ignoring.
>scsi 3:0:0:0: CD-ROM            Optiarc  DVD RW AD-7170A  1.02 PQ: 0 ANSI: 5
>ahci 0000:04:00.0: version 2.1
>ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 15
>PCI: setting IRQ 15 as level-triggered
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNK8] -> GSI 15 (level, low) -> IRQ 15
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xffffc20000020100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 15
>ata6: SATA max UDMA/133 cmd 0xffffc20000020180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 15
>scsi5 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi6 : ahci
>ata6: SATA link down (SStatus 0 SControl 300)
>Initializing USB Mass Storage driver...
>scsi7 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: waiting for device to settle before scanning
>usb-storage: device scan complete
>scsi 7:0:0:0: Direct-Access     EPSON    Stylus Storage   1.00 PQ: 0 ANSI: 2
>sd 7:0:0:0: Attached scsi removable disk sdd
>3ware Storage Controller device driver for Linux v1.26.02.002.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1177166201.393:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:0:1: Attached scsi generic sg1 type 0
>sd 0:0:0:2: Attached scsi generic sg2 type 0
>scsi 3:0:0:0: Attached scsi generic sg3 type 5
>sd 7:0:0:0: Attached scsi generic sg4 type 0
>input: PC Speaker as /class/input/input3
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 3:0:0:0: Attached scsi CD-ROM sr0
>EDAC MC: Ver: 2.0.1 Apr 19 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>forcedeth: using HIGHDMA
>rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:04 failed with error -16
>eth0: forcedeth.c: subsystem: 01458:e000 bound to 0000:00:10.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c80
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0803
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>ACPI: PCI Interrupt Link [LNK3] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:0e.0[A] -> Link [LNK3] -> GSI 11 (level, low) -> IRQ 11
>fw_ohci: Added fw-ohci device 0000:02:0e.0, OHCI version 1.10
>Linux video capture interface: v2.00
>pwc: Philips webcam module version 10.0.12 loaded.
>pwc: Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840.
>pwc: Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30,
>pwc: the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100.
>pwc: Logitech QuickCam 4000 Pro USB webcam detected.
>pwc: Registered as /dev/video0.
>usbcore: registered new interface driver Philips webcam
>cx2388x v4l2 driver version 0.0.6 loaded
>ACPI: PCI Interrupt Link [LNK1] enabled at IRQ 7
>PCI: setting IRQ 7 as level-triggered
>ACPI: PCI Interrupt 0000:02:07.0[A] -> Link [LNK1] -> GSI 7 (level, low) -> IRQ 7
>CORE cx88[0]: subsystem: 7063:5500, board: pcHDTV HD5500 HDTV [card=47,autodetected]
>TV tuner 64 at 0x1fe, Radio tuner -1 at 0x1fe
>cx2388x alsa driver version 0.0.6 loaded
>usbcore: registered new interface driver snd-usb-audio
>cx2388x cx88-mpeg Driver Manager version 0.0.6 loaded
>cx88[0]/0: found at 0000:02:07.0, rev: 5, irq: 7, latency: 32, mmio: 0xea000000
>tuner 2-0043: chip found @ 0x86 (cx88[0])
>tda9887 2-0043: tda988[5/6/7] found @ 0x43 (tuner)
>tuner 2-0061: chip found @ 0xc2 (cx88[0])
>tuner 2-0061: type set to 64 (LG TDVS-H06xF)
>tuner 2-0061: type set to 64 (LG TDVS-H06xF)
>cx88[0]/0: registered device video1 [v4l2]
>cx88[0]/0: registered device vbi0
>ACPI: PCI Interrupt Link [LNK2] enabled at IRQ 15
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNK2] -> GSI 15 (level, low) -> IRQ 15
>cx88[0]/2: cx2388x 8802 Driver Manager
>ACPI: PCI Interrupt 0000:02:07.2[A] -> Link [LNK1] -> GSI 7 (level, low) -> IRQ 7
>cx88[0]/2: found at 0000:02:07.2, rev: 5, irq: 7, latency: 32, mmio: 0xec000000
>cannot find the slot for index 1 (range 0-7), error: -16
>cx88_audio: probe of 0000:02:07.1 failed with error -12
>fw_core: created new fw device fw0 (0 config rom retries)
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNK5] -> GSI 5 (level, low) -> IRQ 5
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2040244k swap on /dev/sda3.  Priority:-1 extents:1 across:2040244k
>audit(1177166225.104:3): audit_pid=2294 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>irq 7: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> <IRQ>  [<ffffffff802bcff4>] __report_bad_irq+0x38/0x7c
> [<ffffffff802bd1fb>] note_interrupt+0x1c3/0x209
> [<ffffffff802bdd70>] handle_level_irq+0xc5/0x100
> [<ffffffff8026bf7f>] do_IRQ+0xf6/0x166
> [<ffffffff8026a666>] default_idle+0x0/0x51
> [<ffffffff8025c666>] ret_from_intr+0x0/0xf
> <EOI>  [<ffffffff80260eba>] __sched_text_start+0x92a/0x962
> [<ffffffff8026a69b>] default_idle+0x35/0x51
> [<ffffffff8026a69d>] default_idle+0x37/0x51
> [<ffffffff8026a69b>] default_idle+0x35/0x51
> [<ffffffff8024884f>] cpu_idle+0xa1/0xc4
> [<ffffffff80275541>] start_secondary+0x2bb/0x2ca
>
>handlers:
>[<ffffffff88339739>] (cx8800_irq+0x0/0x232 [cx8800])
>[<ffffffff88353f2d>] (cx8802_irq+0x0/0x291 [cx8802])
>Disabling IRQ #7

Actions: View

Attachments on bug 237376: 153240 | 153241