Attachment 153269 Details for Bug 237446 – dmesg

dmesg

dmesg.txt (text/plain), 14.83 KB, created by BYTRON on 2007-04-23 09:22:32 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: BYTRON

Created: 2007-04-23 09:22:32 UTC

Size: 14.83 KB

patch

obsolete

># dmesg
>Linux version 2.6.9-42.0.10.ELsmp (mockbuild@builder7.centos.org) (gcc version 3.4.6 20060404 (Red Hat 3.4.6-3)) #1 SMP Tue Feb 27 10:11:19 EST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000bfffa000 (usable)
> BIOS-e820: 00000000bfffa000 - 00000000c0000000 (ACPI data)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
>2175MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f4fd0
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 786426
>  DMA zone: 4096 pages, LIFO batch:1
>  Normal zone: 225280 pages, LIFO batch:16
>  HighMem zone: 557050 pages, LIFO batch:16
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 COMPAQ                                ) @ 0x000f4f70
>ACPI: RSDT (v001 COMPAQ P31      0x00000002 Ò^D 0x0000162e) @ 0xbfffa000
>ACPI: FADT (v001 COMPAQ P31      0x00000002 Ò^D 0x0000162e) @ 0xbfffa040
>ACPI: MADT (v001 COMPAQ 00000083 0x00000002  0x00000000) @ 0xbfffa100
>ACPI: SPCR (v001 COMPAQ SPCRRBSU 0x00000001 Ò^D 0x0000162e) @ 0xbfffa1c0
>ACPI: DSDT (v001 COMPAQ     DSDT 0x00000001 MSFT 0x0100000b) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x920
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] disabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>Enabling APIC mode:  Flat.  Using 0 I/O APICs
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x03] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 3, version 17, address 0xfec01000, GSI 16-31
>ACPI: IOAPIC (id[0x04] address[0xfec02000] gsi_base[32])
>IOAPIC[2]: apic_id 4, version 17, address 0xfec02000, GSI 32-47
>ACPI: IOAPIC (id[0x05] address[0xfec03000] gsi_base[48])
>IOAPIC[3]: apic_id 5, version 17, address 0xfec03000, GSI 48-63
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at c4000000 (gap: c0000000:3ec00000)
>Built 1 zonelists
>Kernel command line: ro root=/dev/VolGroup00/LogVol00
>mapped APIC to ffffd000 (fee00000)
>Initializing CPU#0
>CPU 0 irqstacks, hard=c03ee000 soft=c03ce000
>PID hash table entries: 4096 (order: 12, 65536 bytes)
>Detected 2399.806 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3113436k/3145704k available (1877k kernel code, 31308k reserved, 759k data, 184k init, 2228200k highmem)
>Calibrating delay using timer specific routine.. 4802.48 BogoMIPS (lpj=2401241)
>Security Scaffold v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>There is already a security framework initialized, register_security failed.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU0: Initial APIC ID: 6, Physical Processor ID: 3
>CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Checking 'hlt' instruction... OK.
>CPU0: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>per-CPU timeslice cutoff: 1462.99 usecs.
>task migration cache decay timeout: 2 msecs.
>Booting processor 1/7 eip 3000
>CPU 1 irqstacks, hard=c03ef000 soft=c03cf000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4791.25 BogoMIPS (lpj=2395627)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000
>CPU: After vendor identify, caps:  bfebfbff 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU1: Initial APIC ID: 7, Physical Processor ID: 3
>CPU: After all inits, caps:        bfebf3ff 00000000 00000000 00000080
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.40GHz stepping 07
>Total of 2 processors activated (9593.73 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 pin1=2 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>zapping low mappings.
>checking if image is initramfs... it is
>Freeing initrd memory: 1093k freed
>NET: Registered protocol family 16
>PCI: PCI BIOS revision 2.10 entry at 0xf0094, last bus=6
>PCI: Using configuration type 1
>mtrr: v2.0 (20020519)
>ACPI: Subsystem revision 20040816
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (00:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:0f.1
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Root Bridge [PCI1] (00:01)
>PCI: Probing PCI hardware (bus 01)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Root Bridge [PCI2] (00:04)
>PCI: Probing PCI hardware (bus 04)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI2._PRT]
>ACPI: PCI Interrupt Link [IUSB] (IRQs 4 5 7 *10 11 15)
>ACPI: PCI Interrupt Link [IN16] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN17] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN18] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN19] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN20] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN21] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN22] (IRQs 4 5 *7 10 11 15)
>ACPI: PCI Interrupt Link [IN23] (IRQs 4 *5 7 10 11 15)
>ACPI: PCI Interrupt Link [IN24] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN25] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN26] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN27] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN28] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN29] (IRQs 4 5 7 10 11 *15)
>ACPI: PCI Interrupt Link [IN30] (IRQs 4 5 7 10 *11 15)
>ACPI: PCI Interrupt Link [IN31] (IRQs 4 5 7 10 11 15) *3
>ACPI: PCI Interrupt Link [IN32] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN33] (IRQs 4 5 7 10 11 15) *0, disabled.
>ACPI: PCI Interrupt Link [IN34] (IRQs 4 5 7 10 11 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 169
>ACPI: PCI interrupt 0000:00:05.0[A] -> GSI 23 (level, low) -> IRQ 177
>ACPI: PCI interrupt 0000:00:05.2[B] -> GSI 22 (level, low) -> IRQ 185
>ACPI: PCI Interrupt Link [IUSB] enabled at IRQ 10
>ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 193
>ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 29 (level, low) -> IRQ 201
>PCI: Device 00:00 not found by BIOS
>PCI: Device 00:01 not found by BIOS
>PCI: Device 00:02 not found by BIOS
>PCI: Device 00:78 not found by BIOS
>PCI: Device 00:7b not found by BIOS
>PCI: Device 00:88 not found by BIOS
>PCI: Device 00:8a not found by BIOS
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1177299411.937:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key D4493E7861A97912
>- User ID: CentOS (Kernel Module GPG key)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports C1)
>ACPI: Processor [CPU6] (supports C1)
>ACPI: Processor [CPU7] (supports C1)
>ACPI: Thermal Zone [THM0] (8 C)
>Real Time Clock Driver v1.12
>Linux agpgart interface v0.100 (c) Dave Jones
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>divert: not allocating divert_blk for non-ethernet device lo
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SvrWks CSB5: IDE controller at PCI slot 0000:00:0f.1
>SvrWks CSB5: chipset revision 147
>SvrWks CSB5: not 100% native mode: will probe irqs later
>SvrWks CSB5: simplex device: DMA forced
>    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:pio, hdb:pio
>SvrWks CSB5: simplex device: DMA forced
>    ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: CRN-8245B, ATAPI CD/DVD-ROM drive
>Using cfq io scheduler
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>Probing IDE interface ide2...
>Probing IDE interface ide3...
>Probing IDE interface ide4...
>Probing IDE interface ide5...
>hda: ATAPI 24X CD-ROM drive, 128kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.0:USB HID core driver
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard on isa0060/serio0
>input: PS/2 Generic Mouse on isa0060/serio1
>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 7, 524288 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 262144 (order: 9, 3145728 bytes)
>TCP: Hash tables configured (established 262144 bind 262144)
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S4 S5)
>ACPI wakeup devices:
>
>Freeing unused kernel memory: 184k freed
>SCSI subsystem initialized
>HP CISS Driver (v 2.6.10.RH1)
>cciss: Device 0xb178 has been found at bus 0 dev 4 func 0
>ACPI: PCI interrupt 0000:00:04.0[A] -> GSI 31 (level, low) -> IRQ 169
>cciss: using DAC cycles
>      blocks= 71122560 block_size= 512
>      heads= 255, sectors= 32, cylinders= 8716
>
>      blocks= 71122560 block_size= 512
>      heads= 255, sectors= 32, cylinders= 8716
>
> cciss/c0d0: p1 p2
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>cdrom: open failed.
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 2110150
>EXT3-fs: dm-0: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>inserting floppy driver for 2.6.9-42.0.10.ELsmp
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a National Semiconductor PC87306
>tg3.c:v3.52-rh (Mar 06, 2006)
>ACPI: PCI interrupt 0000:01:02.0[A] -> GSI 30 (level, low) -> IRQ 193
>divert: allocating divert_blk for eth0
>eth0: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:4e:49:90
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[769f4000]
>ACPI: PCI interrupt 0000:04:02.0[A] -> GSI 29 (level, low) -> IRQ 201
>divert: allocating divert_blk for eth1
>eth1: Tigon3 [partno(NA) rev 1002 PHY(5703)] (PCIX:100MHz:64-bit) 10/100/1000BaseT Ethernet 00:0b:cd:4e:49:f2
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1]
>eth1: dma_rwctrl[769f4000]
>ohci_hcd: 2004 Feb 02 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI interrupt 0000:00:0f.2[A] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: irq 10, pci mem f882a000
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>ACPI: Power Button (FF) [PWRF]
>EXT3 FS on dm-0, internal journal
>cdrom: open failed.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on cciss/c0d0p1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 already at revision 0x38 (current=0x38)
>microcode: CPU1 already at revision 0x38 (current=0x38)
>microcode: No new microdata for cpu 1
>microcode: No new microdata for cpu 0
>IA-32 Microcode Update Driver v1.14 unregistered
>ip_tables: (C) 2000-2002 Netfilter core team
>ip_conntrack version 2.1 (8192 buckets, 65536 max) - 340 bytes per conntrack
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>NET: Registered protocol family 10
>Disabled Privacy Extensions on device c0344160(lo)
>IPv6 over IPv4 tunneling driver
>divert: not allocating divert_blk for non-ethernet device sit0
>lp: driver loaded but no devices found
>eth0: no IPv6 routers present
>loop: loaded (max 8 devices)
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on loop0, internal journal
>ext3_orphan_cleanup: deleting unreferenced inode 6100
>ext3_orphan_cleanup: deleting unreferenced inode 6099
>ext3_orphan_cleanup: deleting unreferenced inode 6098
>ext3_orphan_cleanup: deleting unreferenced inode 6097
>EXT3-fs: loop0: 4 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.

Actions: View

Attachments on bug 237446: 153268 | 153269 | 153509