Attachment 153532 Details for Bug 238038 – The /etc/gnokiirc file I use

The /etc/gnokiirc file I use

gnokiirc (text/plain), 7.04 KB, created by Răzvan Sandu on 2007-04-26 17:10:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Răzvan Sandu

Created: 2007-04-26 17:10:54 UTC

Size: 7.04 KB

patch

obsolete

># This is a sample ~/.gnokiirc file.  Copy it into your
># home directory and name it .gnokiirc.
># See http://wiki.gnokii.org/index.php/Config for working examples.
>#
>
>[global]
>
># Set port to the physical port used to connect to your phone.
># Linux version is:
># port = /dev/rfcomm0
>#
># For MacOSX you will need something like:
># port = /dev/cu.USA28X1P1.1
>#
># For Win32 you want to use:
># port = com1:
># or similiar.
>#
># FreeBSD (probably NetBSD and OpenBSD too) use:
># port = /dev/cuaa0
>#
># With Linux-IrDA you will want to use
># port = /dev/ircomm0
># or similiar.
>#
># Use this setting also for the Bluetooth connection:
>port = 00:17:E4:F0:A6:B9
># when using it with AT driver set it to:
># port = /dev/rfcomm0
># or similiar.
>#
># For the Linux USB cables you will need one of the following settings (or
># similiar)
># port = /dev/ttyUSB0
># port = /dev/tts/USB0
># port = /dev/ttyACM0
># the last one will work only with AT driver. The correct setting should be
># given in the dmesg output.
>
># Set model to the model number of your phone. For the
># Symbian phones use:
>model = series60
># For other non-Nokia phones and when you want to use AT
># mode use:
># model = AT
># If you can't figure out what to put here read the FAQ.
># If it still doesn't help, consult gnokii-ml or #gnokii at freenode.
># model = 6510
># There are few main models that should make use of the certain drivers.
># These are: 6110, 7110, 6510, 3110, 2110, 6160.
>
># Set IrDA device name.
># If you use irda connection you may want gnokii to autodetect the irda
># device it connects to. This is fine for most of the cases. if you have
># more than one device in range you may want to give manually the device
># name so gnokii correctly recognizes it. Use the name that you can see
># in the discovery log when the phone with infrared is in the range of
># your irda port.
># Note that you need to set this for each phone_ section separately. It
># isn't nested from the global section.
># irda_string = Nokia 6610i
>
># Initlength controls the number of characters sent to the
># phone during initialisation.  You can either set it to
># the word "default" or a positive integer.
>#
># You can try setting this value if you want to connect
># to the phone quicker.  If you've never noticed the
># connection to be slow, it is suggested that you
># leave this alone.  Read the initialisation code in fbus-xxxx
># to understand what this changes if you're curious.
>initlength = default
>
># The type of the connection, for IR set this to infrared or irda.
># For the nk6110 driver only infrared is valid for the IrDA connection.
># See Docs/gnokii-ir-howto for more detailes on this.
># If you have 6210/6250/7110 phone and dau9p cable (the one you can
># use with 6100 series and cannot use hardware modem from the phone)
># you may want to use 'dau9p' value to get faster initialization.
># If you use dlr3 or dlr3p cable for nokia phones in FBUS mode (ie.
># you don't use model = AT) you may want to use 'dlr3p' value here.
># Note that it is recommended and currently the best way to use this
># cable with nk6510 driver.
># connection = serial
># With DKU-2 cable use the following setting if you want to libusb driver
># (recommended):
># connection = dku2libusb
># or the following setting if you want to use Linux kernel driver
># connection = dku2
># With DKU-5 cable use the following setting
># connection = dku5
># For Bluetooth and AT driver use the following setting
># connection = serial
># For other Bluetooth settings use
>connection = bluetooth
># For infrared connection with phones other than Nokia 6110/6130/6150 use
># connection = irda
>
>
># Set this to 'yes' if you want gnokii to set and check the lock file in
># /var/lock directory. It avoids potential conflicts with other serial
># port software (eg. minicom). If you have wrong permissions for the
># directory, a warning will be generated. If you don't want a lockfile, set
># it to 'no'.
>use_locking = no
>
># Baudrate to use on serial port connections.
># Currently used only by models AT and BIP/CIMD. Defaults to 19200.
>serial_baudrate = 19200
>
># Force waiting after each send character the specified usec time.
># Value -1 forces the fastest 'block' writing,
># value 0 writes each character separately without any explicite waiting,
># other positive values specify the appropriate 1/1000000 sec delaying.
># Siemens M20 requires at least "1"!  FIXME: Model-driven autodetection
>#serial_write_usleep = 10000
>
># Force serial port handshaking mode, useful primarily for "AT" model.
># Gnokii "AT" model uses software handshake by default.
># Possible values: hardware (RTS/CTS - 7 wires) or software (XON/XOFF - 3 wires)
>#handshake = software
>
># If defined (not commented out by '#') it will quit Gnokii anytime
># when DCD line will drop.
>#require_dcd = 1
>
># If you are using a bluetooth connection, you can specify the rfcomm
># channel number here. Default value is 1.
>rfcomm_channel = 14
>
># There may happen various timeouts during the communication with the phone.
># This parameter enables the retransmission policy. Ie. if the phone doesn't
># respond, we send the frame again. This happend mainly with the older
># phones. You may want to enable it when you see mysterious timeouts.
># Be very carefull with this option. It is suspected to cause phone breakage
># with new DCT4 phones (like Nokia 6100). By default it is switched off
># (sm_retry = 0)
>#sm_retry = 1
>
># Run the specified script(s) right after opening and initializing the device
># and before any communication (right before closing for disconnect_script).
># You may find handy to use it to connect your modem to SMS Center
># when using BIP or CIMD protocols
># Non-absolute path is relative to the specific directory where gnokii is run!
>#connect_script = /absolute/path/to/gnokii/Docs/sample/cimd-connect
>#disconnect_script =
>
># When sending SMS you can experience timeouts. This is the feature of the
># overloaded SMSCs. The phones waits for the response from the SMSC confirming
># that it received the short message. When the SMSC is DoSed with many requests
># it will take more time to get the response. Adjust it to your needs. The
># value is given in seconds to wait. Defaults to 10 seconds. Set to 0 to wait
># forever.
>smsc_timeout = 10
>
># Set bindir to point to the location of the various gnokiid binaries.
># In particular ensure that mgnokiidev is in this location, with
># permissions 4750, owned by root, group gnokii.  Ensure you
># are in the gnokii group and that the group exists...
>[gnokiid]
>bindir = /usr/sbin/
>
># Any entries in the following two sections will be set as environment
># variables when running the scripts.
># Handy for use for $VAR substitutions in your chat(8) script.
>[connect_script]
>[disconnect_script]
>
>
># The following parameters control how libgnokii handle the debugging messages.
># Currently there are three categories: "debug" controls the libgnokii
># normal debug output, "rlpdebug" controls the debug output of the RLP
># subsystem, and "xdebug" is used by the xgnokii or smsd.
>
>[logging]
>
># where to log the debug output (on: stderr, off: /dev/null)
>debug = on
>
># where to log the rlp debug output (on: stderr, off: /dev/null)
>rlpdebug = off
>
># where to log X debug output (on: stderr, off: /dev/null)
>xdebug = off

Actions: View

Attachments on bug 238038: 153530 | 153531 | 153532