Attachment 153534 Details for Bug 237547 – dmesg containing noapic suspend/resume and soft lockup

dmesg containing noapic suspend/resume and soft lockup

dmesg (text/plain), 39.31 KB, created by Zack Cerza on 2007-04-26 17:25:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zack Cerza

Created: 2007-04-26 17:25:22 UTC

Size: 39.31 KB

patch

obsolete

>Linux version 2.6.20-1.3111.fc7 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20070424 (Red Hat 4.1.2-11)) #1 SMP Wed Apr 25 12:54:12 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000d0000 size: 0000000000004000 end: 00000000000d4000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003f5e0000 end: 000000003f6e0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003f6e0000 size: 0000000000015000 end: 000000003f6f5000 type: 3
>copy_e820_map() start: 000000003f6f5000 size: 000000000000b000 end: 000000003f700000 type: 4
>copy_e820_map() start: 000000003f700000 size: 0000000000900000 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000f0008000 size: 0000000000004000 end: 00000000f000c000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
>copy_e820_map() start: 00000000fed20000 size: 0000000000070000 end: 00000000fed90000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d0000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f6e0000 (usable)
> BIOS-e820: 000000003f6e0000 - 000000003f6f5000 (ACPI data)
> BIOS-e820: 000000003f6f5000 - 000000003f700000 (ACPI NVS)
> BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000f0008000 - 00000000f000c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>118MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 259808) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   259808
>early_node_map[1] active PFN ranges
>    0:        0 ->   259808
>On node 0 totalpages: 259808
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 2860 pages used for memmap
>  Normal zone: 222420 pages, LIFO batch:31
>  HighMem zone: 386 pages used for memmap
>  HighMem zone: 30046 pages, LIFO batch:7
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6C10, 0024 (r2 IBM   )
>ACPI: XSDT 3F6E4B6C, 005C (r1 IBM    TP-74        1171  LTP        0)
>ACPI: FACP 3F6E4C00, 00F4 (r3 IBM    TP-74        1171 IBM         1)
>ACPI Warning (tbfadt-0420): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 3F6E4DE7, FF8E (r1 IBM    TP-74        1171 MSFT  100000E)
>ACPI: FACS 3F6F6000, 0040
>ACPI: SSDT 3F6E4DB4, 0033 (r1 IBM    TP-74        1171 MSFT  100000E)
>ACPI: ECDT 3F6F4D75, 0052 (r1 IBM    TP-74        1171 IBM         1)
>ACPI: TCPA 3F6F4DC7, 0032 (r1 IBM    TP-74        1171 PTL         1)
>ACPI: APIC 3F6F4DF9, 005A (r1 IBM    TP-74        1171 IBM         1)
>ACPI: MCFG 3F6F4E53, 003E (r1 IBM    TP-74        1171 IBM         1)
>ACPI: BOOT 3F6F4FD8, 0028 (r1 IBM    TP-74        1171  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:13 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Built 1 zonelists.  Total pages: 256510
>Kernel command line: ro root=LABEL=/1 quiet noapic
>Found and enabled local APIC!
>mapped APIC to ffffd000 (fee00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 598.559 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1015056k/1039232k available (2150k kernel code, 23440k reserved, 1140k data, 248k init, 121728k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc077a000   ( 248 kB)
>      .data : 0xc061991d - 0xc0736cb4   (1140 kB)
>      .text : 0xc0400000 - 0xc061991d   (2150 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1198.74 BogoMIPS (lpj=599372)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: afe9fbff 00100000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: After all inits, caps: afe9f3ff 00100000 00000000 00002040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0820)
>CPU0: Intel(R) Pentium(R) M processor 1.50GHz stepping 08
>Total of 1 processors activated (1198.74 BogoMIPS).
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2704 bytes
>Time: 10:21:07  Date: 03/26/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8d8, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff has been reserved
>pnp: 00:02: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:02: iomem range 0xf0008000-0xf000bfff could not be reserved
>pnp: 00:02: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:02: iomem range 0xfed18000-0xfed18fff could not be reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: a0100000-a01fffff
>  PREFETCH window: disabled.
>PCI: Bus 5, cardbus bridge: 0000:04:00.0
>  IO window: 00003000-000030ff
>  IO window: 00003400-000034ff
>  PREFETCH window: d0000000-d3ffffff
>  MEM window: a4000000-a7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-6fff
>  MEM window: a0200000-afffffff
>  PREFETCH window: d0000000-d7ffffff
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2810k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1177582868.585:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D3EAC347FAD45F35
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (32 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 915GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:04:00.0 [1014:0555]
>Time: acpi_pm clocksource has been installed.
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000410
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x6fff
>cs: IO port probe 0x3000-0x6fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xa0200000 - 0xafffffff
>pcmcia: parent PCI bridge Memory window: 0xd0000000 - 0xd7ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:822:376
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>Clocksource tsc unstable (delta = -393013400 ns)
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 11, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xa0040000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10ac1
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>ata1.00: ATA-6: HTC426060G9AT00, 00P3A0B4, max UDMA/100
>ata1.00: 117210240 sectors, multi 16: LBA 
>ata1.00: applying bridge limits
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>scsi 0:0:0:0: Direct-Access     ATA      HTC426060G9AT00  00P3 PQ: 0 ANSI: 5
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 3-2: configuration #1 chosen from 1 choice
> sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xd0000000-0xd7ffffff: excluding 0xd0000000-0xd7ffffff
>cs: memory probe 0xa0200000-0xafffffff: excluding 0xa0200000-0xa11fffff 0xa1a00000-0xa21fffff 0xa2a00000-0xa31fffff 0xa3a00000-0xa81fffff 0xa8a00000-0xa91fffff 0xa9a00000-0xaa1fffff 0xaaa00000-0xab1fffff 0xaba00000-0xac1fffff 0xaca00000-0xad1fffff 0xada00000-0xae1fffff 0xaea00000-0xaf1fffff 0xafa00000-0xb01fffff
>pcmcia: registering new device pcmcia0.0
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: sda3: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 344837
>EXT3-fs: sda3: 1 orphan inode deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1177582883.642:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1801 types, 76 bools, 1 sens, 1024 cats
>security:  60 classes, 65047 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1177582885.142:3): policy loaded auid=4294967295
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>input: PC Speaker as /class/input/input3
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50086 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>MC'97 1 converters and GPIO not ready (0xff00)
>tg3.c:v3.75 (March 23, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: Tigon3 [partno(BCM95751M) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:0a:e4:36:b1:13
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:04:00.1 [1180:0822] (rev 13)
>ACPI: PCI Interrupt 0000:04:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>mmc0: SDHCI at 0xa0201000 irq 11 DMA
>rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:06 failed with error -16
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2200: Intel(R) PRO/Wireless 2200/2915 Network Driver, 1.2.0kmprq
>ipw2200: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:04:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>ipw2200: Detected Intel PRO/Wireless 2915ABG Network Connection
>NET: Registered protocol family 23
>pnp: Device 00:09 activated.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x164e
>nsc-ircc, driver loaded (Dag Brattli)
>ipw2200: Detected geography ZZA (11 802.11bg channels, 13 802.11a channels)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: No dongle connected
>0.0: ttyS0 at I/O 0x3f8 (irq = 3) is a 16550A
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
>ACPI: \_SB_.PCI0.IDE0.SCDM.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SCDM.MSTR: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SCDM.MSTR] Added
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input5
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.13
>ibm_acpi: http://ibm-acpi.sf.net/
>ibm_acpi: ThinkPad EC firmware 74HT25WW-1.00
>ibm_acpi: bay device not present
>ibm_acpi: disabling subdriver bay
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2096472k swap on /dev/sda2.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8119 buckets, 64952 max)
>audit(1177597324.120:4): audit_pid=1637 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>ieee80211_crypt: registered algorithm 'CCMP'
>eth0: no IPv6 routers present
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>tun0: Disabled Privacy Extensions
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>PM: Preparing system for mem sleep
>Stopping tasks ... done.
>Suspending console(s)
>platform bluetooth: suspend
>platform bay.1: suspend
>platform bay.0: suspend
>platform dock.0: suspend
>nsc-ircc nsc-ircc.0: suspend
>ac97 1-1:unknown codec: suspend
>ac97 0-0:AD1981B: suspend
>iTCO_wdt iTCO_wdt: suspend
>serial_cs 0.0: suspend
>usb 3-2:1.0: suspend
>usb 3-2: suspend, may wakeup
>sd 0:0:0:0: suspend
>hub 5-0:1.0: suspend
>usb usb5: suspend, may wakeup
>hub 4-0:1.0: suspend
>usb usb4: suspend, may wakeup
>hub 3-0:1.0: suspend
>usb usb3: suspend, may wakeup
>hub 2-0:1.0: suspend
>usb usb2: suspend, may wakeup
>hub 1-0:1.0: suspend
>usb usb1: suspend, may wakeup
>psmouse serio1: suspend
>atkbd serio0: suspend
>i8042 i8042: suspend
>serial8250 serial8250: suspend
>platform vesafb.0: suspend
>pci_express 0000:00:1c.0:pcie02: suspend
>pci_express 0000:00:1c.0:pcie00: suspend
>pcspkr pcspkr: suspend
>pnp 00:0a: suspend
>nsc-ircc 00:09: suspend
>pnp: Device 00:09 disabled.
>i8042 aux 00:08: suspend
>i8042 kbd 00:07: suspend
>pnp 00:06: suspend, may wakeup
>pnp 00:05: suspend
>pnp 00:04: suspend
>pnp 00:03: suspend
>system 00:02: suspend
>pnp 00:01: suspend
>system 00:00: suspend
>ipw2200 0000:04:02.0: suspend
>eth0: Going into suspend...
>ACPI: PCI interrupt for device 0000:04:02.0 disabled
>sdhci 0000:04:00.1: suspend
>ACPI: PCI interrupt for device 0000:04:00.1 disabled
>yenta_cardbus 0000:04:00.0: suspend
>tg3 0000:02:00.0: suspend
>i801_smbus 0000:00:1f.3: suspend
>ata_piix 0000:00:1f.2: suspend
>pci 0000:00:1f.0: suspend
>Intel ICH Modem 0000:00:1e.3: suspend
>ACPI: PCI interrupt for device 0000:00:1e.3 disabled
>Intel ICH 0000:00:1e.2: suspend
>ACPI: PCI interrupt for device 0000:00:1e.2 disabled
>pci 0000:00:1e.0: suspend
>ehci_hcd 0000:00:1d.7: suspend, may wakeup
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>uhci_hcd 0000:00:1d.3: suspend
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>uhci_hcd 0000:00:1d.2: suspend
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>uhci_hcd 0000:00:1d.1: suspend
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>uhci_hcd 0000:00:1d.0: suspend
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>pcieport-driver 0000:00:1c.0: suspend
>pci 0000:00:02.1: suspend
>pci 0000:00:02.0: suspend
>agpgart-intel 0000:00:00.0: suspend
>thermal thermal:01: suspend
>acpi thermal:00: suspend
>acpi device:1d: suspend
>acpi device:1c: suspend
>acpi device:1b: suspend
>acpi device:1a: suspend
>acpi device:19: suspend
>acpi device:18: suspend
>acpi device:17: suspend
>acpi device:16: suspend
>acpi device:15: suspend
>acpi device:14: suspend
>acpi device:13: suspend
>acpi device:12: suspend
>acpi device:11: suspend
>acpi device:10: suspend
>acpi device:0f: suspend
>acpi device:0e: suspend
>acpi device:0d: suspend
>acpi device:0c: suspend
>acpi device:0b: suspend
>acpi device:0a: suspend
>acpi device:09: suspend
>acpi device:08: suspend
>acpi device:07: suspend
>acpi device:06: suspend
>acpi device:05: suspend
>acpi device:04: suspend
>acpi device:03: suspend
>acpi device:02: suspend
>video video:00: suspend
>ibm_hotkey IBM0068:00: suspend
>ac ACPI0003:00: suspend
>battery PNP0C0A:00: suspend
>power power_resource:00: suspend
>ec PNP0C09:00: suspend
>acpi ATM1100:00: suspend
>acpi IBM0071:00: suspend
>acpi IBM3780:00: suspend
>acpi PNP0303:00: suspend
>acpi PNP0B00:00: suspend
>acpi PNP0C04:00: suspend
>acpi PNP0800:00: suspend
>acpi PNP0200:00: suspend
>acpi PNP0100:00: suspend
>acpi PNP0000:00: suspend
>acpi PNP0C02:00: suspend
>acpi device:01: suspend
>pci_root PNP0A08:00: suspend
>button PNP0C0E:00: suspend
>button PNP0C0D:00: suspend
>acpi PNP0C01:00: suspend
>pci_link PNP0C0F:07: suspend
>pci_link PNP0C0F:06: suspend
>pci_link PNP0C0F:05: suspend
>pci_link PNP0C0F:04: suspend
>pci_link PNP0C0F:03: suspend
>pci_link PNP0C0F:02: suspend
>pci_link PNP0C0F:01: suspend
>pci_link PNP0C0F:00: suspend
>acpi device:00: suspend
>processor ACPI0007:00: suspend
>button button_power:00: suspend
>acpi acpi_system:00: suspend
>Disabling non-boot CPUs ...
>PM: Entering mem sleep
>platform bluetooth: LATE suspend
>platform bay.1: LATE suspend
>platform bay.0: LATE suspend
>platform dock.0: LATE suspend
>nsc-ircc nsc-ircc.0: LATE suspend
>iTCO_wdt iTCO_wdt: LATE suspend
>serial8250 serial8250: LATE suspend
>platform vesafb.0: LATE suspend
>pcspkr pcspkr: LATE suspend
>ipw2200 0000:04:02.0: LATE suspend
>sdhci 0000:04:00.1: LATE suspend
>yenta_cardbus 0000:04:00.0: LATE suspend
>tg3 0000:02:00.0: LATE suspend
>i801_smbus 0000:00:1f.3: LATE suspend
>pci 0000:00:1f.0: LATE suspend
>Intel ICH Modem 0000:00:1e.3: LATE suspend
>Intel ICH 0000:00:1e.2: LATE suspend
>pci 0000:00:1e.0: LATE suspend
>pcieport-driver 0000:00:1c.0: LATE suspend
>pci 0000:00:02.1: LATE suspend
>pci 0000:00:02.0: LATE suspend
>agpgart-intel 0000:00:00.0: LATE suspend
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Back to C!
>agpgart-intel 0000:00:00.0: EARLY resume
>pci 0000:00:02.0: EARLY resume
>pci 0000:00:02.1: EARLY resume
>pcieport-driver 0000:00:1c.0: EARLY resume
>uhci_hcd 0000:00:1d.0: EARLY resume
>uhci_hcd 0000:00:1d.1: EARLY resume
>uhci_hcd 0000:00:1d.2: EARLY resume
>uhci_hcd 0000:00:1d.3: EARLY resume
>ehci_hcd 0000:00:1d.7: EARLY resume
>pci 0000:00:1e.0: EARLY resume
>Intel ICH 0000:00:1e.2: EARLY resume
>Intel ICH Modem 0000:00:1e.3: EARLY resume
>pci 0000:00:1f.0: EARLY resume
>ata_piix 0000:00:1f.2: EARLY resume
>i801_smbus 0000:00:1f.3: EARLY resume
>tg3 0000:02:00.0: EARLY resume
>yenta_cardbus 0000:04:00.0: EARLY resume
>sdhci 0000:04:00.1: EARLY resume
>ipw2200 0000:04:02.0: EARLY resume
>pcspkr pcspkr: EARLY resume
>platform vesafb.0: EARLY resume
>serial8250 serial8250: EARLY resume
>i8042 i8042: EARLY resume
>iTCO_wdt iTCO_wdt: EARLY resume
>nsc-ircc nsc-ircc.0: EARLY resume
>platform dock.0: EARLY resume
>platform bay.0: EARLY resume
>platform bay.1: EARLY resume
>platform bluetooth: EARLY resume
>PM: Finishing wakeup.
>acpi acpi_system:00: resuming
>button button_power:00: resuming
>processor ACPI0007:00: resuming
>acpi device:00: resuming
>pci_link PNP0C0F:00: resuming
>pci_link PNP0C0F:01: resuming
>pci_link PNP0C0F:02: resuming
>pci_link PNP0C0F:03: resuming
>pci_link PNP0C0F:04: resuming
>pci_link PNP0C0F:05: resuming
>pci_link PNP0C0F:06: resuming
>pci_link PNP0C0F:07: resuming
>acpi PNP0C01:00: resuming
>button PNP0C0D:00: resuming
>button PNP0C0E:00: resuming
>pci_root PNP0A08:00: resuming
>acpi device:01: resuming
>acpi PNP0C02:00: resuming
>acpi PNP0000:00: resuming
>acpi PNP0100:00: resuming
>acpi PNP0200:00: resuming
>acpi PNP0800:00: resuming
>acpi PNP0C04:00: resuming
>acpi PNP0B00:00: resuming
>acpi PNP0303:00: resuming
>acpi IBM3780:00: resuming
>acpi IBM0071:00: resuming
>acpi ATM1100:00: resuming
>ec PNP0C09:00: resuming
>power power_resource:00: resuming
>battery PNP0C0A:00: resuming
>ac ACPI0003:00: resuming
>ibm_hotkey IBM0068:00: resuming
>video video:00: resuming
>acpi device:02: resuming
>acpi device:03: resuming
>acpi device:04: resuming
>acpi device:05: resuming
>acpi device:06: resuming
>acpi device:07: resuming
>acpi device:08: resuming
>acpi device:09: resuming
>acpi device:0a: resuming
>acpi device:0b: resuming
>acpi device:0c: resuming
>acpi device:0d: resuming
>acpi device:0e: resuming
>acpi device:0f: resuming
>acpi device:10: resuming
>acpi device:11: resuming
>acpi device:12: resuming
>acpi device:13: resuming
>acpi device:14: resuming
>acpi device:15: resuming
>acpi device:16: resuming
>acpi device:17: resuming
>acpi device:18: resuming
>acpi device:19: resuming
>acpi device:1a: resuming
>acpi device:1b: resuming
>acpi device:1c: resuming
>acpi device:1d: resuming
>acpi thermal:00: resuming
>thermal thermal:01: resuming
>agpgart-intel 0000:00:00.0: resuming
>pci 0000:00:02.0: resuming
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>pci 0000:00:02.1: resuming
>pcieport-driver 0000:00:1c.0: resuming
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>uhci_hcd 0000:00:1d.0: resuming
>PCI: Enabling device 0000:00:1d.0 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>uhci_hcd 0000:00:1d.1: resuming
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>usb usb2: root hub lost power or was reset
>uhci_hcd 0000:00:1d.2: resuming
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>usb usb3: root hub lost power or was reset
>uhci_hcd 0000:00:1d.3: resuming
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>usb usb4: root hub lost power or was reset
>ehci_hcd 0000:00:1d.7: resuming
>PCI: Enabling device 0000:00:1d.7 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>pci 0000:00:1e.0: resuming
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Intel ICH 0000:00:1e.2: resuming
>ACPI: PCI Interrupt 0000:00:1e.2[A] -> Link [LNKG] -> GSI 5 (level, low) -> IRQ 5
>PCI: Setting latency timer of device 0000:00:1e.2 to 64
>Intel ICH Modem 0000:00:1e.3: resuming
>ACPI: PCI Interrupt 0000:00:1e.3[B] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1e.3 to 64
>pci 0000:00:1f.0: resuming
>ata_piix 0000:00:1f.2: resuming
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>i801_smbus 0000:00:1f.3: resuming
>tg3 0000:02:00.0: resuming
>yenta_cardbus 0000:04:00.0: resuming
>sdhci 0000:04:00.1: resuming
>ACPI: PCI Interrupt 0000:04:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ipw2200 0000:04:02.0: resuming
>eth0: Coming out of suspend...
>ACPI: PCI Interrupt 0000:04:02.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>system 00:00: resuming
>pnp 00:01: resuming
>system 00:02: resuming
>pnp 00:03: resuming
>pnp 00:04: resuming
>pnp 00:05: resuming
>pnp 00:06: resuming
>i8042 kbd 00:07: resuming
>i8042 aux 00:08: resuming
>nsc-ircc 00:09: resuming
>pnp: Device 00:09 activated.
>pnp 00:0a: resuming
>pcspkr pcspkr: resuming
>pci_express 0000:00:1c.0:pcie00: resuming
>pci_express 0000:00:1c.0:pcie02: resuming
>platform vesafb.0: resuming
>serial8250 serial8250: resuming
>i8042 i8042: resuming
>atkbd serio0: resuming
>psmouse serio1: resuming
>usb usb1: resuming
>hub 1-0:1.0: resuming
>usb usb2: resuming
>hub 2-0:1.0: resuming
>usb usb3: resuming
>hub 3-0:1.0: resuming
>usb usb4: resuming
>hub 4-0:1.0: resuming
>usb usb5: resuming
>hub 5-0:1.0: resuming
>sd 0:0:0:0: resuming
>ata1: soft resetting port
>usb 3-2: resuming
> usbdev3.3_ep00: PM: resume from 0, parent 3-2 still 2
>usb 3-2:1.0: PM: resume from 2, parent 3-2 still 2
>usb 3-2:1.0: resuming
> usbdev3.3_ep81: PM: resume from 0, parent 3-2:1.0 still 2
> usbdev3.3_ep02: PM: resume from 0, parent 3-2:1.0 still 2
> usbdev3.3_ep83: PM: resume from 0, parent 3-2:1.0 still 2
> usbdev3.3: PM: resume from 0, parent 3-2 still 2
>serial_cs 0.0: resuming
>iTCO_wdt iTCO_wdt: resuming
>ac97 0-0:AD1981B: resuming
>ac97 1-1:unknown codec: resuming
>nsc-ircc nsc-ircc.0: resuming
>platform dock.0: resuming
>platform bay.0: resuming
>platform bay.1: resuming
>platform bluetooth: resuming
>Restarting tasks ... <3>hub 2-0:1.0: over-current change on port 1
>done.
>hub 2-0:1.0: over-current change on port 2
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>usb 3-2: USB disconnect, address 3
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>ata1.00: configured for UDMA/100
>ata1: EH complete
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>usb 3-2: new full speed USB device using uhci_hcd and address 4
>usb 3-2: configuration #1 chosen from 1 choice
>hub 5-0:1.0: over-current change on port 3
>hub 5-0:1.0: over-current change on port 4
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>spurious 8259A interrupt: IRQ7.
>ieee80211_crypt: registered algorithm 'WEP'
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>tg3: eth1: Link is up at 1000 Mbps, full duplex.
>tg3: eth1: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>eth1: no IPv6 routers present
>BUG: soft lockup detected on CPU#0!
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c04588b9>] softlockup_tick+0xa8/0xba
> [<c042f3cb>] run_local_timers+0x12/0x14
> [<c042f7b6>] update_process_times+0x3e/0x63
> [<c043ee8b>] tick_sched_timer+0x5d/0xa1
> [<c043b56e>] hrtimer_interrupt+0x128/0x1b2
> [<c0419f41>] smp_apic_timer_interrupt+0x72/0x84
> [<c0405b3b>] apic_timer_interrupt+0x33/0x38
> [<c04795cd>] cache_alloc_debugcheck_after+0x28/0x14c
> [<c047aa8a>] kmem_cache_alloc+0xb8/0xc4
> [<c05affc6>] __alloc_skb+0x2c/0xfd
> [<c05b0683>] __netdev_alloc_skb+0x1f/0x39
> [<f8aaf4e8>] tg3_poll+0x3cc/0x7e8 [tg3]
> [<c05b58b3>] net_rx_action+0xa1/0x1a8
> [<c042bfa7>] __do_softirq+0x6f/0xe2
> [<c0407420>] do_softirq+0x61/0xd0
> [<c042be3f>] irq_exit+0x47/0x7b
> [<c0419f46>] smp_apic_timer_interrupt+0x77/0x84
> [<c0405b3b>] apic_timer_interrupt+0x33/0x38
> =======================
>BUG: soft lockup detected on CPU#0!
> [<c04061e9>] show_trace_log_lvl+0x1a/0x2f
> [<c04067ad>] show_trace+0x12/0x14
> [<c0406831>] dump_stack+0x16/0x18
> [<c04588b9>] softlockup_tick+0xa8/0xba
> [<c042f3cb>] run_local_timers+0x12/0x14
> [<c042f7b6>] update_process_times+0x3e/0x63
> [<c043ee8b>] tick_sched_timer+0x5d/0xa1
> [<c043b56e>] hrtimer_interrupt+0x128/0x1b2
> [<c0419f41>] smp_apic_timer_interrupt+0x72/0x84
> [<c0405b3b>] apic_timer_interrupt+0x33/0x38
> [<c05afa9f>] skb_release_data+0x7c/0x80
> [<c05af845>] kfree_skbmem+0xb/0x66
> [<c05af9b1>] __kfree_skb+0x111/0x118
> [<c05b4ea4>] net_tx_action+0x71/0xeb
> [<c042bfa7>] __do_softirq+0x6f/0xe2
> [<c0407420>] do_softirq+0x61/0xd0
> [<c042be3f>] irq_exit+0x47/0x7b
> [<c0419f46>] smp_apic_timer_interrupt+0x77/0x84
> [<c0405b3b>] apic_timer_interrupt+0x33/0x38
> [<c05500dd>] nvram_read+0x50/0x94
> [<c047eb50>] vfs_read+0xad/0x161
> [<c047efdc>] sys_read+0x3d/0x61
> [<c0405078>] syscall_call+0x7/0xb
> =======================

Actions: View

Attachments on bug 237547: 153351 | 153455 | 153534 | 153535 | 153631