Attachment 153576 Details for Bug 236262 – lspci and dmesg output from SuSe on same hardware that fails LiveCD

lspci and dmesg output from SuSe on same hardware that fails LiveCD

lspci_dmesg.txt (text/plain), 20.01 KB, created by Mike Laughton on 2007-04-27 03:42:40 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mike Laughton

Created: 2007-04-27 03:42:40 UTC

Size: 20.01 KB

patch

obsolete

>lspci output
>---------------------------------------------------------------------------
>00:00.0 Host bridge: ALi Corporation M1671 Super P4 Northbridge [AGP4X,PCI and SDR/DDR] (rev 02)
>00:01.0 PCI bridge: ALi Corporation PCI to AGP Controller
>00:06.0 Multimedia audio controller: ALi Corporation M5451 PCI AC-Link Controller Audio Device (rev 02)
>00:07.0 ISA bridge: ALi Corporation M1533/M1535 PCI to ISA Bridge [Aladdin IV/V/V+]
>00:08.0 Modem: ALi Corporation M5457 AC'97 Modem Controller
>00:09.0 Network controller: Intersil Corporation Prism 2.5 Wavelan chipset (rev 01)
>00:0a.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
>00:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
>00:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 50)
>00:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 51)
>00:0c.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link)
>00:10.0 IDE interface: ALi Corporation M5229 IDE (rev c4)
>00:11.0 Bridge: ALi Corporation M7101 Power Management Controller [PMU]
>00:12.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller
>01:00.0 VGA compatible controller: nVidia Corporation NV17 [GeForce4 420 Go 32M] (rev a3)
>02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88w8335 [Libertas] 802.11b/g Wireless (rev 03)
>
>dmesg output
>---------------------------------------------------------------------------
>Linux version 2.6.16.20-0.12-default (geeko@buildhost) (gcc version 4.1.0 (SUSE Linux)) #1 Mon Jun 19 22:25:45 UTC 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fef0000 (usable)
> BIOS-e820: 000000001fef0000 - 000000001fefc000 (ACPI data)
> BIOS-e820: 000000001fefc000 - 000000001ff00000 (ACPI NVS)
> BIOS-e820: 000000001ff00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>No mptable found.
>On node 0 totalpages: 130800
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 126704 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI 2.3 present.
>IO/L-APIC allowed because system is MP or new enough
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7400
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1fef7b7a
>ACPI: FADT (v001 ALI    M1533    0x06040000 PTL  0x000f4240) @ 0x1fefbf8c
>ACPI: DSDT (v001    ALI    M1533 0x06040000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x8008
>Allocating PCI resources starting at 30000000 (gap: 20000000:dffc0000)
>Built 1 zonelists
>Kernel command line: root=/dev/hda6 vga=0x317    resume=/dev/hda5  splash=silent
>bootsplash: silent mode.
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 2000.173 MHz processor.
>Using tsc for high-res timesource
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 513064k/523200k available (1489k kernel code, 9496k reserved, 609k data, 156k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4007.09 BogoMIPS (lpj=8014196)
>Security Framework v1.0.0 initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 3febf9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 3febf9ff 00000000 00000000 00000080 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>CPU: Intel(R) Pentium(R) 4 Mobile CPU 2.00GHz stepping 04
>Checking 'hlt' instruction... OK.
>checking if image is initramfs... it is
>Freeing initrd memory: 2322k freed
> not found!
>ACPI: setting ELCR to 0200 (from 0e20)
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd88e, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 8000-803f claimed by ali7101 ACPI
>PCI quirk: region 8040-805f claimed by ali7101 SMB
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *9
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *10 11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
>ACPI: Embedded Controller [EC0] (gpe 24) interrupt mode.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>TC classifier action (bugs to netdev@vger.kernel.org cc hadi@cyberus.ca)
>Setting up standard PCI resources
>pnp: 00:07: ioport range 0x3810-0x381f has been reserved
>pnp: 00:07: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:07: ioport range 0x8000-0x805f could not be reserved
>pnp: 00:07: ioport range 0x4d6-0x4d6 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e9000000-e9ffffff
>  PREFETCH window: ea000000-efffffff
>PCI: Bus 2, cardbus bridge: 0000:00:0a.0
>  IO window: 00002000-000020ff
>  IO window: 00002400-000024ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 32000000-33ffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1177625960.668:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>Initializing Cryptographic API
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Activating ISA DMA hang workarounds.
>vesafb: framebuffer at 0xec000000, mapped to 0xe0880000, using 6144k, total 32768k
>vesafb: mode is 1024x768x16, linelength=2048, pages=1
>vesafb: protected mode interface info at c000:f510
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
>bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 47656 bytes,<6>...found (1024x768, 30698 bytes, v3).
>Console: switching to colour frame buffer device 123x44
>fb0: VESA VGA frame buffer device
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PCI: Enabling device 0000:00:08.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>0000:00:08.0: ttyS0 at I/O 0x1428 (irq = 10) is a 8250
>0000:00:08.0: ttyS1 at I/O 0x1440 (irq = 10) is a 8250
>0000:00:08.0: ttyS2 at I/O 0x1450 (irq = 10) is a 8250
>0000:00:08.0: ttyS3 at I/O 0x1460 (irq = 10) is a 8250
>Couldn't register serial port 0000:00:08.0: -28
>floppy0: no floppy controllers found
>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input0
>input: PC Speaker as /class/input/input1
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 4, 65536 bytes)
>TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>NET: Registered protocol family 1
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>PCI0 MDEM AUDI  LAN Z001 Z002 Z003  LID 
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 156k freed
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ALI15X3: IDE controller at PCI slot 0000:00:10.0
>ACPI: PCI Interrupt 0000:00:10.0[A]: no GSI
>ALI15X3: chipset revision 196
>ALI15X3: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1840-0x1847, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1848-0x184f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: IC25N040ATCS04-0, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>hda: max request size: 128KiB
>hda: 78140160 sectors (40007 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(33)
>hda: cache flushes not supported
> hda: hda1 hda2 < hda5 hda6 hda7 >
>Probing IDE interface ide1...
>hdc: MATSHITACD-RW CW-8121, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (49 C)
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>Attempting manual resume
>ReiserFS: hda6: found reiserfs format "3.6" with standard journal
>ReiserFS: hda6: using ordered data mode
>reiserfs: using flush barriers
>ReiserFS: hda6: journal params: device hda6, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
>ReiserFS: hda6: checking transaction log (hda6)
>reiserfs: disabling flush barriers on hda6
>ReiserFS: hda6: Using r5 hash to sort names
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Enabling device 0000:00:0b.2 (0010 -> 0012)
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt 0000:00:0b.2[C] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:00:0b.2: EHCI Host Controller
>ehci_hcd 0000:00:0b.2: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:0b.2: irq 11, io mem 0xe8002000
>ehci_hcd 0000:00:0b.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
>usb usb1: new device found, idVendor=0000, idProduct=0000
>usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb1: Product: EHCI Host Controller
>usb usb1: Manufacturer: Linux 2.6.16.20-0.12-default ehci_hcd
>usb usb1: SerialNumber: 0000:00:0b.2
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>natsemi dp8381x driver, version 1.07+LK1.0.17, Sep 27, 2002
>  originally by Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/natsemi.html
>  2.4.x kernel port by Jeff Garzik, Tjeerd Mulder
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:0b.0: UHCI Host Controller
>uhci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:0b.0: irq 11, io base 0x00001800
>usb usb2: new device found, idVendor=0000, idProduct=0000
>usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb2: Product: UHCI Host Controller
>usb usb2: Manufacturer: Linux 2.6.16.20-0.12-default uhci_hcd
>usb usb2: SerialNumber: 0000:00:0b.0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, DMA
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LNKE] -> GSI 10 (level, low) -> IRQ 10
>uhci_hcd 0000:00:0b.1: UHCI Host Controller
>uhci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:0b.1: irq 10, io base 0x00001820
>usb usb3: new device found, idVendor=0000, idProduct=0000
>usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1
>usb usb3: Product: UHCI Host Controller
>usb usb3: Manufacturer: Linux 2.6.16.20-0.12-default uhci_hcd
>usb usb3: SerialNumber: 0000:00:0b.1
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>p80211: module not supported by Novell, setting U taint flag.
>prism2_pci: module not supported by Novell, setting U taint flag.
>prism2pci_init: prism2_pci.o: 0.2.3 Loaded
>ali15x3_smbus 0000:00:11.0: ALI15X3_smb region uninitialized - upgrade BIOS or use force_addr=0xaddr
>ali15x3_smbus 0000:00:11.0: ALI15X3 not detected, module not inserted.
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKB] -> GSI 5 (level, low) -> IRQ 5
>natsemi eth0: NatSemi DP8381[56] at 0xe8003000 (0000:00:12.0), 00:c0:9f:14:d6:43, IRQ 5, port TP.
>PCI: Enabling device 0000:00:09.0 (0010 -> 0012)
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>A Prism2.5 PCI device found, phymem:0xe8008000, irq:11, mem:0xe103a000
>Linux agpgart interface v0.101 (c) Dave Jones
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7, dma 0 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:00:0a.0 [152d:2201]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:0a.0, mfunc 0x01201212, devctl 0x64
>Yenta: ISA IRQ mask 0x0078, PCI irq 11
>Socket status: 30000020
>agpgart: Detected ALi M1671 chipset
>agpgart: AGP aperture is 128M @ 0xf0000000
>usb 2-1: new low speed USB device using uhci_hcd and address 4
>ieee1394: Initialized config rom entry `ip1394'
>nvidia: module not supported by Novell, setting U taint flag.
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 10 (level, low) -> IRQ 10
>NVRM: loading NVIDIA Linux x86 Kernel Module  1.0-8762  Mon May 15 13:06:38 PDT 2006
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>pccard: CardBus card inserted into slot 0
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x408-0x40f 0x480-0x48f
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>PCI: Enabling device 0000:00:0c.0 (0010 -> 0012)
>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[11]  MMIO=[e8002800-e8002fff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:06.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>usb 2-1: new low speed USB device using uhci_hcd and address 6
>usb 2-1: new device found, idVendor=046d, idProduct=c043
>usb 2-1: new device strings: Mfr=1, Product=2, SerialNumber=0
>usb 2-1: Product: USB-PS/2 Optical Mouse
>usb 2-1: Manufacturer: Logitech
>usb 2-1: configuration #1 chosen from 1 choice
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00c09f000006688f]
>usbcore: registered new driver hiddev
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input4
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-1
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>ALSA sound/pci/ac97/ac97_codec.c:1904: AC'97 1 does not respond - RESET
>ALSA sound/pci/ac97/ac97_codec.c:1913: AC'97 1 access is not valid [0xffffffff], removing mixer.
>ALSA sound/pci/ali5451/ali5451.c:1976: ali mixer 1 creating error.
>ndiswrapper: module not supported by Novell, setting U taint flag.
>ndiswrapper version 1.10 loaded (preempt=no,smp=no)
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>dm-netlink version 0.0.2 loaded
>ndiswrapper: driver wg511v2 (NETGEAR,09/17/2004,3.1.0.19) loaded
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKF] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ndiswrapper: using irq 11
>wlan1: vendor: ''
>wlan1: ndiswrapper ethernet device 00:0f:b5:0a:5b:9f using driver wg511v2, 11AB:1FAA:1385:4E00.5.conf
>wlan1: encryption modes supported: WEP; TKIP with WPA
>loop: loaded (max 8 devices)
>AppArmor: AppArmor (version 2.0-19.43r6320) initialized
>audit(1177626006.426:2): AppArmor (version 2.0-19.43r6320) initialized
>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (4087 buckets, 32696 max) - 232 bytes per conntrack
>Adding 1542200k swap on /dev/hda5.  Priority:-1 extents:1 across:1542200k
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ACPI: Lid Switch [LID]
>eth0: DSPCFG accepted after 0 usec.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>IA-32 Microcode Update Driver: v1.14 <tigran@veritas.com>
>microcode: CPU0 updated from revision 0x0 to 0x20, date = 06052003 
>IA-32 Microcode Update Driver v1.14 unregistered
>powernow: This module only works with AMD K7 CPUs
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>wlan1: no IPv6 routers present
>bootsplash: status on console 0 changed to on
>SFW2-INext-DROP-DEFLT IN=wlan1 OUT= MAC= SRC=192.168.0.5 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>SFW2-INext-DROP-DEFLT IN=wlan1 OUT= MAC= SRC=192.168.0.5 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85 
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>serial8250: too much work for irq10
>SFW2-INext-DROP-DEFLT IN=wlan1 OUT= MAC= SRC=192.168.0.5 DST=224.0.0.251 LEN=105 TOS=0x00 PREC=0x00 TTL=255 ID=0 DF PROTO=UDP SPT=5353 DPT=5353 LEN=85

Actions: View

Attachments on bug 236262: 153576