Attachment 153732 Details for Bug 238316 – serial console boot showing the location timing of the message

serial console boot showing the location timing of the message

poweredge.boot.1.txt (text/plain), 19.77 KB, created by David Timms on 2007-04-29 11:43:07 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: David Timms

Created: 2007-04-29 11:43:07 UTC

Size: 19.77 KB

patch

obsolete

>Linux version 2.6.21-1.3116.fc7 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.2 20070424 (Red Hat 4.1.2-11)) #1 SMP Thu Apr 26 10:36:44 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 0000000000100000 size: 000000007fee0000 end: 000000007ffe0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007ffe0000 size: 000000000000fc00 end: 000000007ffefc00 type: 3
>copy_e820_map() start: 000000007ffefc00 size: 000000000000f400 end: 000000007ffff000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 0000000000100000 - 000000007ffe0000 (usable)
> BIOS-e820: 000000007ffe0000 - 000000007ffefc00 (ACPI data)
> BIOS-e820: 000000007ffefc00 - 000000007ffff000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524256
>early_node_map[1] active PFN ranges
>    0:        0 ->   524256
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FDC40, 0014 (r0 DELL  )
>ACPI: RSDT 000FDC54, 0030 (r1 DELL   PE1600SC        1 MSFT  100000A)
>ACPI: FACP 000FDC84, 0074 (r1 DELL   PE1600SC        1 MSFT  100000A)
>ACPI: DSDT 7FFE0000, 3121 (r1 DELL   PE1600SC        1 MSFT  100000A)
>ACPI: FACS 7FFEFC00, 0040
>ACPI: APIC 000FDCF8, 0088 (r1 DELL   PE1600SC        1 MSFT  100000A)
>ACPI: SPCR 000FDD80, 0050 (r1 DELL   PE1600SC        1 MSFT  100000A)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] enabled)
>Processor #6 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] enabled)
>Processor #7 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 17, address 0xfec00000, GSI 0-15
>ACPI: IOAPIC (id[0x09] address[0xfec01000] gsi_base[16])
>IOAPIC[1]: apic_id 9, version 17, address 0xfec01000, GSI 16-31
>ACPI: IOAPIC (id[0x0a] address[0xfec02000] gsi_base[32])
>IOAPIC[2]: apic_id 10, version 17, address 0xfec02000, GSI 32-47
>Enabling APIC mode:  Flat.  Using 3 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ffff000:7ec01000)
>Built 1 zonelists.  Total pages: 517601
>Kernel command line: ro root=LABEL=/1 console=tty0 console=ttyS0,38400n8
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2790.833 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2058780k/2097024k available (2150k kernel code, 37028k reserved, 1140k data, 248k init, 1179520k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc077a000   ( 248 kB)
>      .data : 0xc0619955 - 0xc0736cb4   (1140 kB)
>      .text : 0xc0400000 - 0xc0619955   (2150 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5584.96 BogoMIPS (lpj=2792480)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a0000 soft=c0780000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5580.66 BogoMIPS (lpj=2790333)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
>lockdep: not fixing up alternatives.
>Booting processor 2/6 eip 3000
>CPU 2 irqstacks, hard=c07a1000 soft=c0781000
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5580.63 BogoMIPS (lpj=2790317)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
>lockdep: not fixing up alternatives.
>Booting processor 3/7 eip 3000
>CPU 3 irqstacks, hard=c07a2000 soft=c0782000
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5580.72 BogoMIPS (lpj=2790364)
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 3
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel(R) Xeon(TM) CPU 2.80GHz stepping 09
>Total of 4 processors activated (22326.98 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>checking TSC synchronization [CPU#0 -> CPU#2]: passed.
>checking TSC synchronization [CPU#0 -> CPU#3]: passed.
>Brought up 4 CPUs
>migration_cost=434,1146
>Time: 18:10:00  Date: 03/29/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfc68e, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>ACPI: PCI Root Bridge [PCI1] (0000:01)
>ACPI: PCI Root Bridge [PCI2] (0000:02)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNK2] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK6] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK8] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNK9] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 9 10 11 12 14)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN10] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN11] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN12] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN13] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN14] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN15] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN16] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN17] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN18] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN19] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1A] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1B] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1C] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1D] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1E] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LN1F] (IRQs 3 4 5 6 7 9 10 11 12 14) *0, disabled.
>ACPI: PCI Interrupt Link [LUSB] (IRQs 3 4 5 6 7 *10 11 12 14)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0a: ioport range 0x814-0x85b has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:0a: ioport range 0x820-0x83f has been reserved
>pnp: 00:0a: ioport range 0x8a0-0x8af has been reserved
>pnp: 00:0a: ioport range 0xc00-0xcd7 has been reserved
>pnp: 00:0a: ioport range 0xf50-0xf58 has been reserved
>pnp: 00:0a: ioport range 0x800-0x819 could not be reserved
>pnp: 00:0a: ioport range 0x880-0x89f has been reserved
>pnp: 00:0a: ioport range 0x8c0-0x8c3 has been reserved
>pnp: 00:0b: iomem range 0x0-0x0 could not be reserved
>pnp: 00:0b: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0b: iomem range 0x100000-0x7fffffff could not be reserved
>pnp: 00:0b: iomem range 0xf0000-0xfffff could not be reserved
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2813k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1177870199.029:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key DEDF55B35CB8C48C
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: MSI quirk detected. MSI deactivated.
>PCI: MSI quirk detected. MSI deactivated.
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 2
>Switched to high resolution mode on CPU 3
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 3:692:191
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>Red Hat nash version 6.0.9 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>Creating initial device nodes
>Setting up hotplug.
>Creating block device nodes.
>Loading uhci-hcd.ko module
>USB Universal Host Controller Interface driver v3.0
>Loading ohci-hcd.ko module
>ACPI: PCI Interrupt Link [LUSB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0f.2[A] -> Link [LUSB] -> GSI 10 (level, low) -> IRQ 10
>ohci_hcd 0000:00:0f.2: OHCI Host Controller
>ohci_hcd 0000:00:0f.2: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0f.2: irq 10, io mem 0xfe120000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>Loading ehci-hcd.ko module
>Loading mbcache.ko module
>Loading jbd.ko module
>Loading ext3.ko module
>Loading megaraid_mm.ko module
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading megaraid_mbox.ko modulemegaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>
>megaraid: probe new device 0x1000:0x1960:0x1028:0x0520: bus 1:slot 2:func 0
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 17 (level, low) -> IRQ 16
>megaraid: fw version:[352B] bios version:[1.10]
>scsi0 : LSI Logic MegaRAID driver
>scsi[0]: scanning scsi channel 0 [Phy 0]Loading mptbase. for non-raid devices
>ko module
>Fusion MPT base driver 3.04.04
>Copyright (c) 1999-2007 LSI Logic Corporation
>Loading scsi_transport_spi.ko module
>Loading mptscsih.ko module
>Loading mptspi.ko module
>Fusion MPT SPI Host driver 3.04.04
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 29 (level, low) -> IRQ 17
>mptbase: Initiating ioc0 bringup
>ioc0: 53C1030: Capabilities={Initiator,Target}
>scsi1 : ioc0: LSI53C1030, FwRev=01032300h, Ports=1, MaxQ=255, IRQ=17
>scsi: waiting for bus probes to complete ...
>scsi 1:0:6:0: Sequential-Access ARCHIVE  Python 06408-XXX 912L PQ: 0 ANSI: 3
> target1:0:6: Beginning Domain Validation
> target1:0:6: Domain Validation skipping write tests
> target1:0:6: Ending Domain Validation
> target1:0:6: FAST-40 WIDE SCSI 80.0 MB/s ST (25 ns, offset 32)
>scsi[0]: scanning scsi channel 1 [virtual] for logical drives
>scsi 0:1:0:0: Direct-Access     MegaRAID LD 0 RAID1   34G 352B PQ: 0 ANSI: 2
>scsi 0:1:1:0: Direct-Access     MegaRAID LD 1 RAID0   34G 352B PQ: 0 ANSI: 2
>SCSI device sda: 71020544 512-byte hdwr sectors (36363 MB)
>sda: Write Protect is off
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 71020544 512-byte hdwr sectors (36363 MB)
>sda: Write Protect is off
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:1:0:0: Attached scsi disk sda
>SCSI device sdb: 71020544 512-byte hdwr sectors (36363 MB)
>sdb: Write Protect is off
>sdb: asking for cache data failed
>sdb: assuming drive cache: write through
>SCSI device sdb: 71020544 512-byte hdwr sectors (36363 MB)
>sdb: Write Protect is off
>sdb: asking for cache data failed
>sdb: assuming drive cache: write through
> sdb: sdb1
>sd 0:1:1:0: Attached scsi disk sdb
>Trying to resume from LABEL=SWAP-sda6
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1177870206.028:2): enforcing=1 old_enforcing=0 auid=4294967295
>audit(1177870206.528:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>		Welcome to Fedora 
>		Press 'I' to enter interactive startup.
>Setting clock  (localtime): Sun Apr 29 18:10:12 EST 2007 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname poweredge:  [  OK  ]
>No devices found
>Setting up Logical Volume Management:   No volume groups found
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/sda3 
>/1: clean, 105329/1025024 files, 659342/1024143 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda2 
>[/sbin/fsck.ext3 (2) -- /home/media/] fsck.ext3 -a /dev/sdb1 
>/boot1: clean, 39/6024 files, 13659/24096 blocks
>[/sbin/fsck.ext3 (2) -- /home] fsck.ext3 -a /dev/sda5 
>/dev/sdb1: clean, 3456/4440064 files, 6678928/8875904 blocks
>/home1: clean, 1496/4288416 files, 3909026/4287339 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 5
>Entering non-interactive startup
>Starting background readahead (early, fast mode): [  OK  ]
>Checking for hardware changes [  OK  ]
>Applying iptables firewall rules: [  OK  ]
>Loading additional iptables modules: ip_conntrack_netbios_ns [  OK  ]
>FATAL: Module off not found.
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>FATAL: Module off not found.
>Starting restorecond: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting rpcbind: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Starting system message bus: [  OK  ]
>Starting Bluetooth services:[  OK  ][  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting hpiod: [  OK  ]
>Starting hpssd: [  OK  ]
>Starting cups: [  OK  ]
>Starting sshd: [  OK  ]
>Starting ntpd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting ConsoleKit: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting background readahead (later, fast mode): [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]
>Starting smartd: [  OK  ]
>
>Fedora release 6.93 (Rawhide)
>Kernel 2.6.21-1.3116.fc7 on an i686
>
>poweredge login:

Actions: View

Attachments on bug 238316: 153732