Attachment 153742 Details for Bug 238350 – Output of lspci -v

Output of lspci -v

lspci.out (text/plain), 11.23 KB, created by Bruno Wolff III on 2007-04-29 18:52:41 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bruno Wolff III

Created: 2007-04-29 18:52:41 UTC

Size: 11.23 KB

patch

obsolete

>00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] System Controller (rev 11)
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 32
>	Region 0: Memory at f0000000 (32-bit, prefetchable) [size=32M]
>	Region 1: Memory at f7000000 (32-bit, prefetchable) [size=4K]
>	Region 2: I/O ports at e800 [disabled] [size=4]
>	Capabilities: [a0] AGP version 2.0
>		Status: RQ=16 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
>
>00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-760 MP [IGD4-2P] AGP Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
>	I/O behind bridge: 0000b000-0000bfff
>	Memory behind bridge: f2000000-f3ffffff
>	Prefetchable memory behind bridge: e0000000-efffffff
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ISA (rev 05)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-768 [Opus] IDE (rev 04) (prog-if 8a [Master SecP PriP])
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at f000 [size=16]
>
>00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] ACPI (rev 03)
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-768 [Opus] Audio (rev 03)
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32
>	Interrupt: pin B routed to IRQ 17
>	Region 0: I/O ports at c000 [size=256]
>	Region 1: I/O ports at c400 [size=64]
>
>00:08.0 Network controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN interface
>	Subsystem: Unknown device b1d9:0001
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (250ns min, 32000ns max)
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at d000 [size=256]
>	Region 1: Memory at f7001000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [40] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=55mA PME(D0+,D1-,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:09.0 RAID bus controller: Triones Technologies, Inc. HPT302/302N (rev 01)
>	Subsystem: Triones Technologies, Inc. Unknown device 0001
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 120 (2000ns min, 2000ns max)
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at d400 [size=8]
>	Region 1: I/O ports at d800 [size=4]
>	Region 2: I/O ports at dc00 [size=8]
>	Region 3: I/O ports at e000 [size=4]
>	Region 4: I/O ports at e400 [size=256]
>	[virtual] Expansion ROM at 88100000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:10.0 PCI bridge: Advanced Micro Devices [AMD] AMD-768 [Opus] PCI (rev 05) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 32
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>	I/O behind bridge: 00008000-0000afff
>	Memory behind bridge: f5000000-f6ffffff
>	Prefetchable memory behind bridge: 88000000-880fffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>01:05.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01) (prog-if 00 [VGA])
>	Subsystem: C.P. Technology Co. Ltd Unknown device 2062
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at b000 [size=256]
>	Region 2: Memory at f3000000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at f2000000 [disabled] [size=128K]
>	Capabilities: [58] AGP version 2.0
>		Status: RQ=80 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
>		Command: RQ=16 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x1
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>01:05.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (Secondary) (rev 01)
>	Subsystem: C.P. Technology Co. Ltd Unknown device 2063
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min), Cache Line Size: 32 bytes
>	Region 0: Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Region 1: Memory at f3010000 (32-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-768 [Opus] USB (rev 07) (prog-if 10 [OHCI])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (20000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin D routed to IRQ 16
>	Region 0: Memory at f6024000 (32-bit, non-prefetchable) [size=4K]
>
>02:05.0 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 37)
>	Subsystem: LSI Logic / Symbios Logic LSI22801 PCI to Dual Channel Ultra SCSI host adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin A routed to IRQ 17
>	Region 0: I/O ports at 8000 [size=256]
>	Region 1: Memory at f6029000 (32-bit, non-prefetchable) [size=256]
>	Region 2: Memory at f602a000 (32-bit, non-prefetchable) [size=4K]
>	[virtual] Expansion ROM at 88000000 [disabled] [size=64K]
>	Capabilities: [40] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:05.1 SCSI storage controller: LSI Logic / Symbios Logic 53c875 (rev 37)
>	Subsystem: LSI Logic / Symbios Logic LSI22801 PCI to Dual Channel Ultra SCSI host adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 72 (4250ns min, 16000ns max), Cache Line Size: 64 bytes
>	Interrupt: pin B routed to IRQ 18
>	Region 0: I/O ports at 8400 [size=256]
>	Region 1: Memory at f6025000 (32-bit, non-prefetchable) [size=256]
>	Region 2: Memory at f6026000 (32-bit, non-prefetchable) [size=4K]
>	[virtual] Expansion ROM at 88010000 [disabled] [size=64K]
>	Capabilities: [40] Power Management version 1
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:06.0 Ethernet controller: D-Link System Inc RTL8139 Ethernet (rev 10)
>	Subsystem: D-Link System Inc DFE-530TX+ 10/100 Ethernet Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (8000ns min, 16000ns max)
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at 8800 [size=256]
>	Region 1: Memory at f6027000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>02:07.0 Ethernet controller: Intel Corporation 82557/8/9 [Ethernet Pro 100] (rev 0d)
>	Subsystem: Intel Corporation EtherExpress PRO/100 Server Adapter
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at f6028000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at 8c00 [size=64]
>	Region 2: Memory at f6000000 (32-bit, non-prefetchable) [size=128K]
>	[virtual] Expansion ROM at 88020000 [disabled] [size=64K]
>	Capabilities: [dc] Power Management version 2
>		Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=2 PME-
>
>02:08.0 RAID bus controller: Promise Technology, Inc. PDC20276 (MBFastTrak133 Lite) (rev 01) (prog-if 85)
>	Subsystem: Giga-byte Technology MBUltra 133
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (1000ns min, 4500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 18
>	Region 0: I/O ports at 9000 [size=8]
>	Region 1: I/O ports at 9400 [size=4]
>	Region 2: I/O ports at 9800 [size=8]
>	Region 3: I/O ports at 9c00 [size=4]
>	Region 4: I/O ports at a000 [size=16]
>	Region 5: Memory at f6020000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [60] Power Management version 1
>		Flags: PMEClk- DSI+ D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>

Actions: View

Attachments on bug 238350: 153741 | 153742