Attachment 153756 Details for Bug 238370 – Strange things in dmesg -- Hope it helps.

Strange things in dmesg -- Hope it helps.

dmesg.txt (text/plain), 37.76 KB, created by Ron Askew on 2007-04-30 02:37:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Ron Askew

Created: 2007-04-30 02:37:21 UTC

Size: 37.76 KB

patch

obsolete

>Linux version 2.6.20-1.2944.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue Apr 10 17:46:00 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet reset_devices pci=mmconf pci=routeirq loglevel=4 msi maxloop=32
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
> BIOS-e820: 000000007ffb0000 - 000000007ffc0000 (ACPI data)
> BIOS-e820: 000000007ffc0000 - 000000007fff0000 (ACPI NVS)
> BIOS-e820: 000000007fff0000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x00000000000faf80
>ACPI: RSDT (v001 A M I  OEMRSDT  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0000
>ACPI: FADT (v002 A M I  OEMFACP  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x07000613 MSFT 0x00000097) @ 0x000000007ffb0390
>ACPI: OEMB (v001 A M I  OEMBIOS  0x07000613 MSFT 0x00000097) @ 0x000000007ffc0040
>ACPI: DSDT (v001  A0551 A0551036 0x00000036 INTL 0x02002026) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524208) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524208
>On node 0 totalpages: 524111
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1323 pages reserved
>  DMA zone: 2612 pages, LIFO batch:0
>  DMA32 zone: 8126 pages used for memmap
>  DMA32 zone: 511986 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e6000
>Nosave address range: 00000000000e6000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fb80000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 514598
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet reset_devices pci=mmconf pci=routeirq loglevel=4 msi maxloop=32
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2052596k/2096832k available (2454k kernel code, 43848k reserved, 1459k data, 316k init)
>Calibrating delay using timer specific routine.. 6386.46 BogoMIPS (lpj=3193231)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12468861
>Detected 12.468 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 32610.24 BogoMIPS (lpj=16305123)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) 4 CPU 3.20GHz stepping 09
>Brought up 2 CPUs
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3192.038 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=3
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:02:09.0[A] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 23
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:0c: ioport range 0x290-0x297 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: c000-cfff
>  MEM window: fa000000-fbefffff
>  PREFETCH window: f0000000-f8ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-efff
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: 88000000-880fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2326k freed
>audit: initializing netlink socket (disabled)
>audit(1177866220.456:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 6BCD6F1378173560
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU1._PDC] (Node ffff810037d9cb50), AE_BAD_HEADER
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI Error (psparse-0537): Method parse/execution failed [\_PR_.CPU2._PDC] (Node ffff810037d9ca50), AE_BAD_HEADER
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI Exception (acpi_processor-0677): AE_NOT_FOUND, Processor Device is not present [20060707]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD205BA, ATA DISK drive
>hdb: MAXTOR STM3320620A, ATA DISK drive
>hda: hw_config=603b
>hda: hw_config=603b
>hdb: hw_config=6b00
>hdb: hw_config=6b00
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-STDVD-RAM GSA-H22N, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 40088160 sectors (20525 MB) w/2048KiB Cache, CHS=39770/16/63<6>hda: hw_config=603b
>, UDMA(66)
>hda: cache flushes not supported
> hda: hda1 hda2
>hdb: max request size: 512KiB
>hdb: 625142448 sectors (320072 MB) w/16384KiB Cache, CHS=38913/255/63<6>hdb: hw_config=6b00
>, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1042k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000a800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fffc00
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/64, error -71
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 2 roles, 460 types, 17 bools, 1 sens, 1024 cats
>security:  58 classes, 8925 rules
>security:  class context not defined in policy
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>security:  permission setsockcreate in class process not defined in policy
>security:  permission polmatch in class association not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1177866224.227:2): policy loaded auid=4294967295
>usb 5-4: new high speed USB device using ehci_hcd and address 5
>usb 5-4: configuration #1 chosen from 1 choice
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>Initializing USB Mass Storage driver...
>usb 2-1: configuration #1 chosen from 1 choice
>hub 2-1:1.0: USB hub found
>hub 2-1:1.0: 4 ports detected
>scsi0 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb 1-1: new full speed USB device using uhci_hcd and address 3
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: device descriptor read/64, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 5
>usb 1-1: device not accepting address 5, error -71
>usb 1-1: new full speed USB device using uhci_hcd and address 6
>usb 1-1: device not accepting address 6, error -71
>usb 1-2: new low speed USB device using uhci_hcd and address 7
>usb 1-2: configuration #1 chosen from 1 choice
>input: B16_b_02 USB-PS/2 Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [B16_b_02 USB-PS/2 Optical Mouse] on usb-0000:00:1d.0-2
>usb 2-1.1: new full speed USB device using uhci_hcd and address 3
>usb 2-1.1: configuration #1 chosen from 1 choice
>usb 2-1.3: new full speed USB device using uhci_hcd and address 4
>usb 2-1.3: configuration #1 chosen from 1 choice
>usb 2-1.4: new low speed USB device using uhci_hcd and address 5
>hdc: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>usb 2-1.4: configuration #1 chosen from 1 choice
>ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
>  http://www.scyld.com/network/ne2k-pci.html
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> GSI 22 (level, low) -> IRQ 22
>eth0: RealTek RTL-8029 found at 0xe000, IRQ 22, 00:40:05:61:67:80.
>ACPI: PCI Interrupt 0000:02:0d.0[A] -> GSI 23 (level, low) -> IRQ 23
>skge 1.9 addr 0xfbff8000 irq 23 chip Yukon-Lite rev 9
>skge eth1: addr 00:17:31:6a:c4:05
>iTCO_vendor_support: vendor-support=0
>input: PC Speaker as /class/input/input4
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
>snd_page_alloc: no version for "struct_module" found: kernel tainted.
>intel_rng: FWH not detected
>scsi 0:0:0:0: Direct-Access     USB 2.0  Storage Device   0100 PQ: 0 ANSI: 0 CCS
>SCSI device sda: 25429824 512-byte hdwr sectors (13020 MB)
>sda: Write Protect is off
>sda: Mode Sense: 08 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 25429824 512-byte hdwr sectors (13020 MB)
>sda: Write Protect is off
>sda: Mode Sense: 08 00 00 00
>sda: assuming drive cache: write through
> sda:<6>parport0: Printer, Lexmark Lexmark 2030 Color Jetprinter
> sda1
>sd 0:0:0:0: Attached scsi disk sda
>usb-storage: device scan complete
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>hiddev96: USB HID v1.10 Device [American Power Conversion Back-UPS RS 1500 FW:8.g9 .D USB FW:g9 ] on usb-0000:00:1d.1-1.4
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 4 if 0 alt 1 proto 2 vid 0x03F0 pid 0x3C02
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>ALSA /var/tmp/bach-build/BUILD/alsa-driver-1.0.14rc3/pci/ac97/ac97_codec.c:2118: AC'97 0 analog subsections not ready
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>intel8x0_measure_ac97_clock: measured 50961 usecs
>intel8x0: clocking to 48000
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>usb 5-4: reset high speed USB device using ehci_hcd and address 5
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev hda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>skge eth0: enabling interface
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>skge eth0: Link is up at 100 Mbps, full duplex, flow control both
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1177880658.319:3): avc:  denied  { search } for  pid=2451 comm="dhclient" name="lib64" dev=dm-0 ino=78938113 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=dir
>audit(1177880658.319:4): avc:  denied  { read } for  pid=2451 comm="dhclient" name="libc.so.6" dev=dm-0 ino=78938427 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=lnk_file
>audit(1177880658.319:5): avc:  denied  { read } for  pid=2451 comm="dhclient" name="libc-2.5.so" dev=dm-0 ino=78938117 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=file
>audit(1177880658.319:6): avc:  denied  { execute } for  pid=2451 comm="dhclient" name="libc-2.5.so" dev=dm-0 ino=78938117 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=file
>audit(1177880658.396:7): avc:  denied  { read } for  pid=2452 comm="dhclient-script" name="gconv-modules.cache" dev=dm-0 ino=57312190 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:usr_t:s0 tclass=file
>audit(1177880658.467:8): avc:  denied  { read } for  pid=2452 comm="dhclient-script" name="dhclient-exit-hooks" dev=dm-0 ino=56559743 scontext=system_u:system_r:dhclient_t:s0 tcontext=root:object_r:etc_t:s0 tclass=file
>audit(1177880658.473:9): avc:  denied  { search } for  pid=2484 comm="sh" name="firestarter" dev=dm-0 ino=56590442 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:etc_t:s0 tclass=dir
>audit(1177880658.480:10): avc:  denied  { read } for  pid=2484 comm="sh" name="firestarter.sh" dev=dm-0 ino=56590572 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1177880658.481:11): avc:  denied  { ioctl } for  pid=2484 comm="sh" name="firestarter.sh" dev=dm-0 ino=56590572 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1177880658.688:12): avc:  denied  { read } for  pid=2563 comm="sh" name="firestarter.sh" dev=dm-0 ino=56590572 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1177880658.688:13): avc:  denied  { ioctl } for  pid=2563 comm="sh" name="firestarter.sh" dev=dm-0 ino=56590572 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=file
>audit(1177880658.723:14): avc:  denied  { write } for  pid=2592 comm="touch" name="subsys" dev=dm-0 ino=38305828 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:dir_var_lock_subsys_t:s0 tclass=dir
>audit(1177880658.723:15): avc:  denied  { create } for  pid=2592 comm="touch" name="firestarter" scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:dir_var_lock_subsys_t:s0 tclass=file
>audit(1177880658.723:16): avc:  denied  { write } for  pid=2592 comm="touch" name="firestarter" dev=dm-0 ino=38306602 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:dir_var_lock_subsys_t:s0 tclass=file
>audit(1177880658.734:17): avc:  denied  { read } for  pid=2595 comm="modprobe" name="modprobe.d" dev=dm-0 ino=56557783 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:etc_t:s0 tclass=dir
>audit(1177880658.735:18): avc:  denied  { read } for  pid=2595 comm="modprobe" name="modprobe.conf" dev=dm-0 ino=56560140 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:dir_etc_t:s0 tclass=file
>audit(1177880658.739:19): avc:  denied  { write } for  pid=2595 comm="modprobe" name="x_tables.ko" dev=dm-0 ino=69960368 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:lib_t:s0 tclass=file
>audit(1177880658.848:20): avc:  denied  { sys_module } for  pid=2600 comm="modprobe" capability=16 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:system_r:dhclient_t:s0 tclass=capability
>audit(1177880659.238:21): avc:  denied  { write } for  pid=2563 comm="sh" name="ip_forward" dev=proc ino=4026531979 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:proc_t:s0 tclass=file
>audit(1177880659.283:22): avc:  denied  { search } for  pid=2563 comm="sh" name="inbound" dev=dm-0 ino=56590565 scontext=system_u:system_r:dhclient_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>audit(1177880659.646:23): avc:  denied  { search } for  pid=2843 comm="auditd" name="lib64" dev=dm-0 ino=78938113 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=dir
>audit(1177880659.646:24): avc:  denied  { read } for  pid=2843 comm="auditd" name="libpthread.so.0" dev=dm-0 ino=78938434 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=lnk_file
>audit(1177880659.646:25): avc:  denied  { read } for  pid=2843 comm="auditd" name="libpthread-2.5.so" dev=dm-0 ino=78938148 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=file
>audit(1177880659.646:26): avc:  denied  { execute } for  pid=2843 comm="auditd" name="libpthread-2.5.so" dev=dm-0 ino=78938148 scontext=system_u:system_r:auditd_t:s0 tcontext=system_u:object_r:lib64_t:s0 tclass=file
>audit(1177880659.666:27): audit_pid=2844 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>inode_doinit_with_dentry:  context_to_sid(root:object_r:named_conf_t:s0) returned 22 for dev=dm-0 ino=38437249
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>ppdev: user-space parallel port driver
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>Inbound IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=192.168.1.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32771 DPT=161 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32771 DPT=161 LEN=54 
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>Inbound IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=192.168.1.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32796 DPT=161 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32796 DPT=161 LEN=54 
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>Inbound IN=eth1 OUT= MAC=01:00:5e:00:00:01:00:14:a5:97:f3:fc:08:00 SRC=192.168.1.1 DST=224.0.0.1 LEN=28 TOS=0x00 PREC=0x00 TTL=1 ID=0 DF PROTO=2 
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first
>Inbound IN=eth1 OUT= MAC= SRC=192.168.1.100 DST=192.168.1.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32796 DPT=161 LEN=54 
>Inbound IN=eth0 OUT= MAC= SRC=192.168.0.1 DST=192.168.0.255 LEN=74 TOS=0x00 PREC=0x00 TTL=64 ID=0 DF PROTO=UDP SPT=32796 DPT=161 LEN=54 
>ppdev0: registered pardevice
>ppdev0: negotiated back to compatibility mode because user-space forgot
>ppdev0: unregistered pardevice
>ppdev1: claim the port first
>ppdev2: claim the port first
>ppdev3: claim the port first

Actions: View

Attachments on bug 238370: 153748 | 153756