Attachment 153791 Details for Bug 238427 – scsconfig.log generated when performing Audio Configuration Sound Test

scsconfig.log generated when performing Audio Configuration Sound Test

scsconfig.log (text/plain), 44.70 KB, created by Nachiket Nadkarni on 2007-04-30 13:27:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nachiket Nadkarni

Created: 2007-04-30 13:27:17 UTC

Size: 44.70 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Mon Apr 30 13:39:45 BST 2007
>
>------- lspci --------
>00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub (rev 02)
>00:01.0 PCI bridge: Intel Corporation 82945G/GZ/P/PL PCI Express Root Port (rev 02)
>00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
>00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
>00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
>00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
>00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
>00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
>00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
>00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>00:1e.2 Multimedia audio controller: Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller (rev 01)
>00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
>00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
>00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
>00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>01:00.0 VGA compatible controller: ATI Technologies Inc RV380 [Radeon X600 (PCIE)]
>01:00.1 Display controller: ATI Technologies Inc RV380 [Radeon X600]
>02:00.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express (rev 01)
>
>------- lspci -vn --------
>00:00.0 0600: 8086:2770 (rev 02)
>	Subsystem: 1028:01ad
>	Flags: bus master, fast devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:01.0 0604: 8086:2771 (rev 02) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000d000-0000dfff
>	Memory behind bridge: fe900000-feafffff
>	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
>	Capabilities: [88] Subsystem: 8086:0000
>	Capabilities: [80] Power Management version 2
>	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [a0] Express Root Port (Slot+) IRQ 0
>
>00:1c.0 0604: 8086:27d0 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
>	Memory behind bridge: fe800000-fe8fffff
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [90] Subsystem: 0000:0000
>	Capabilities: [a0] Power Management version 2
>
>00:1c.1 0604: 8086:27d2 (rev 01) (prog-if 00 [Normal decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
>	Memory behind bridge: fe700000-fe7fffff
>	Capabilities: [40] Express Root Port (Slot+) IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable-
>	Capabilities: [90] Subsystem: 0000:0000
>	Capabilities: [a0] Power Management version 2
>
>00:1d.0 0c03: 8086:27c8 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 21
>	I/O ports at ff80 [size=32]
>
>00:1d.1 0c03: 8086:27c9 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 22
>	I/O ports at ff60 [size=32]
>
>00:1d.2 0c03: 8086:27ca (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 18
>	I/O ports at ff40 [size=32]
>
>00:1d.3 0c03: 8086:27cb (rev 01) (prog-if 00 [UHCI])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 23
>	I/O ports at ff20 [size=32]
>
>00:1d.7 0c03: 8086:27cc (rev 01) (prog-if 20 [EHCI])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 21
>	Memory at ffa80800 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Debug port
>
>00:1e.0 0604: 8086:244e (rev e1) (prog-if 01 [Subtractive decode])
>	Flags: bus master, fast devsel, latency 0
>	Bus: primary=00, secondary=04, subordinate=04, sec-latency=32
>	Capabilities: [50] Subsystem: 0000:0000
>
>00:1e.2 0401: 8086:27de (rev 01)
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 10
>	I/O ports at ec00 [size=256]
>	I/O ports at e8c0 [size=64]
>	Memory at febffa00 (32-bit, non-prefetchable) [size=512]
>	Memory at febff900 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [50] Power Management version 2
>
>00:1f.0 0601: 8086:27b8 (rev 01)
>	Flags: bus master, medium devsel, latency 0
>	Capabilities: [e0] Vendor Specific Information
>
>00:1f.1 0101: 8086:27df (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: 1028:01ad
>	Flags: bus master, medium devsel, latency 0, IRQ 16
>	I/O ports at 01f0 [size=8]
>	I/O ports at 03f4 [size=1]
>	I/O ports at 0170 [size=8]
>	I/O ports at 0374 [size=1]
>	I/O ports at ffa0 [size=16]
>
>00:1f.2 0101: 8086:27c0 (rev 01) (prog-if 8f [Master SecP SecO PriP PriO])
>	Subsystem: 1028:01ad
>	Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 20
>	I/O ports at fe00 [size=8]
>	I/O ports at fe10 [size=4]
>	I/O ports at fe20 [size=8]
>	I/O ports at fe30 [size=4]
>	I/O ports at fea0 [size=16]
>	Capabilities: [70] Power Management version 2
>
>00:1f.3 0c05: 8086:27da (rev 01)
>	Subsystem: 1028:01ad
>	Flags: medium devsel, IRQ 17
>	I/O ports at e8a0 [size=32]
>
>01:00.0 0300: 1002:5b62 (prog-if 00 [VGA])
>	Subsystem: 1002:0b02
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at e0000000 (64-bit, prefetchable) [size=256M]
>	Memory at fe9e0000 (64-bit, non-prefetchable) [size=64K]
>	I/O ports at dc00 [size=256]
>	Expansion ROM at fea00000 [disabled] [size=128K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Express Endpoint IRQ 0
>	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>
>01:00.1 0380: 1002:5b72
>	Subsystem: 1002:0b03
>	Flags: bus master, fast devsel, latency 0
>	Memory at fe9f0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [50] Power Management version 2
>	Capabilities: [58] Express Endpoint IRQ 0
>
>02:00.0 0200: 14e4:1677 (rev 01)
>	Subsystem: 1028:01ad
>	Flags: bus master, fast devsel, latency 0, IRQ 16
>	Memory at fe8f0000 (64-bit, non-prefetchable) [size=64K]
>	Capabilities: [48] Power Management version 2
>	Capabilities: [50] Vital Product Data
>	Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/3 Enable-
>	Capabilities: [d0] Express Endpoint IRQ 0
>
>------- lsmod --------
>Module                  Size  Used by
>nfs                   266177  1 
>lockd                  78001  2 nfs
>nfs_acl                12481  1 nfs
>autofs4                34145  2 
>hidp                   38985  2 
>rfcomm                 58361  0 
>l2cap                  42449  10 hidp,rfcomm
>sunrpc                195689  4 nfs,lockd,nfs_acl
>nf_conntrack_netbios_ns    11841  0 
>ipt_REJECT             13505  1 
>nf_conntrack_ipv4      20945  6 
>xt_state               11329  6 
>nf_conntrack           77213  3 nf_conntrack_netbios_ns,nf_conntrack_ipv4,xt_state
>nfnetlink              16393  2 nf_conntrack_ipv4,nf_conntrack
>xt_tcpudp              12225  8 
>iptable_filter         11841  1 
>ip_tables              29225  1 iptable_filter
>x_tables               30049  4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
>fuse                   57601  2 
>dm_mirror              31745  0 
>dm_mod                 72945  1 dm_mirror
>video                  28753  0 
>sbs                    26281  0 
>i2c_ec                 14657  1 sbs
>button                 18017  0 
>bay                    15425  0 
>dock                   20489  1 bay
>battery                20169  0 
>asus_acpi              27885  0 
>ac                     14921  0 
>radeon                127969  2 
>drm                   106777  3 radeon
>ipv6                  348193  36 
>lp                     24017  0 
>snd_intel8x0           46449  0 
>snd_ac97_codec        123929  1 snd_intel8x0
>ac97_bus               11841  1 snd_ac97_codec
>snd_seq_dummy          12741  0 
>snd_seq_oss            42321  0 
>snd_seq_midi_event     16969  1 snd_seq_oss
>joydev                 19905  0 
>snd_seq                66377  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_usb_audio         100977  1 
>snd_usb_lib            26969  1 snd_usb_audio
>hci_usb                28557  2 
>serio_raw              16581  0 
>snd_rawmidi            36193  1 snd_usb_lib
>bluetooth              75909  8 hidp,rfcomm,l2cap,hci_usb
>snd_pcm_oss            54241  0 
>tg3                   121557  0 
>wacom                  26569  0 
>rtc_cmos               17385  0 
>snd_seq_device         17757  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
>snd_mixer_oss          25929  1 snd_pcm_oss
>rtc_core               21345  1 rtc_cmos
>rtc_lib                12609  1 rtc_core
>snd_hwdep              19537  1 snd_usb_audio
>snd_pcm                96113  4 snd_intel8x0,snd_ac97_codec,snd_usb_audio,snd_pcm_oss
>parport_pc             39017  1 
>parport                50797  2 lp,parport_pc
>i2c_i801               18781  0 
>i2c_core               34001  2 i2c_ec,i2c_i801
>iTCO_wdt               21305  0 
>pcspkr                 12225  0 
>iTCO_vendor_support    12869  1 iTCO_wdt
>snd_timer              34017  2 snd_seq,snd_pcm
>snd                    75049  14 snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_usb_audio,snd_rawmidi,snd_pcm_oss,snd_seq_device,snd_mixer_oss,snd_hwdep,snd_pcm,snd_timer
>shpchp                 43893  0 
>soundcore              17761  1 snd
>snd_page_alloc         19281  2 snd_intel8x0,snd_pcm
>sr_mod                 27109  0 
>cdrom                  44777  1 sr_mod
>sg                     46833  0 
>ata_piix               26053  3 
>ata_generic            18245  0 
>libata                134641  2 ata_piix,ata_generic
>sd_mod                 31169  4 
>scsi_mod              170137  4 sr_mod,sg,libata,sd_mod
>ext3                  144897  1 
>jbd                    75345  1 ext3
>mbcache                18761  1 ext3
>ehci_hcd               44761  0 
>ohci_hcd               32353  0 
>uhci_hcd               35433  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 tg3
>alias scsi_hostadapter ata_piix
>alias snd-card-0 snd-intel8x0
>options snd-card-0 index=0
>options snd-intel8x0 index=0
>remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard
>#If you edit this file, don't run system-config-soundcard,
>#all changes could be lost.
>#SWCONF
>#DEV 0
>defaults.pcm.card 0 
>defaults.pcm.device 0 
>defaults.ctl.card 0 
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>
>------- amixer --------
>Simple mixer control 'Mic',0
>  Capabilities: cvolume cswitch cswitch-joined
>  Capture channels: Mono
>  Limits: Capture 0 - 24
>  Mono: Capture 0 [0%] [0.00dB] [off]
>Simple mixer control 'Auto Gain Control',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14rc3 (Wed Mar 14 07:25:50 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-0.4.rc3.fc7
>alsa-lib-1.0.14-0.4.rc3.fc7
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-0.5.rc2.fc7
>
>------- /proc/asound/modules --------
> 0 snd_usb_audio
>
>------- /proc/asound/pcm --------
>00-00: USB Audio : USB Audio : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: i2c-i801
>desc: "Intel Corporation 82801G (ICH7 Family) SMBus Controller"
>vendorId: 8086
>deviceId: 27da
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: iTCO_wdt
>desc: "Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge"
>vendorId: 8086
>deviceId: 27b8
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82801 PCI Bridge"
>vendorId: 8086
>deviceId: 244e
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: shpchp
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 2"
>vendorId: 8086
>deviceId: 27d2
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  1
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: shpchp
>desc: "Intel Corporation 82801G (ICH7 Family) PCI Express Port 1"
>vendorId: 8086
>deviceId: 27d0
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1c
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: shpchp
>desc: "Intel Corporation 82945G/GZ/P/PL PCI Express Root Port"
>vendorId: 8086
>deviceId: 2771
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: hci_usb
>desc: "Broadcom Belkin Bluetooth Device"
>usbclass: 224
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 2
>usblevel: 1
>usbport: 1
>usbdev: 3
>vendorId: 0a5c
>deviceId: 200a
>usbmfr: Broadcom
>usbprod: Belkin Bluetooth Device
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: hci_usb
>desc: "Broadcom Belkin Bluetooth Device"
>usbclass: 255
>usbsubclass: 255
>usbprotocol: 255
>usbbus: 2
>usblevel: 1
>usbport: 1
>usbdev: 3
>vendorId: 0a5c
>deviceId: 200a
>usbmfr: Broadcom
>usbprod: Belkin Bluetooth Device
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Intel Corporation 82945G/GZ/P/PL Memory Controller Hub"
>vendorId: 8086
>deviceId: 2770
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.3104.fc7 ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 5
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.3104.fc7 ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.3104.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.3104.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.3104.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.3104.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.3104.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.3104.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.20-1.3104.fc7 uhci_hcd UHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 4
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.20-1.3104.fc7 uhci_hcd
>usbprod: UHCI Host Controller
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>driver: pcspkr
>desc: "PC Speaker"
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: parport_pc
>desc: "PNP0401"
>deviceId: PNP0401
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0501"
>deviceId: PNP0501
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>driver: rtc-cmos
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c01"
>deviceId: PNP0c01
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (CM)"
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Power Button (FF)"
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "USB camera"
>usbclass: 255
>usbsubclass: 255
>usbprotocol: 255
>usbbus: 2
>usblevel: 1
>usbport: 0
>usbdev: 2
>vendorId: 045e
>deviceId: 00f5
>usbprod: USB camera
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: snd-usb-audio
>desc: "USB camera"
>usbclass: 1
>usbsubclass: 1
>usbprotocol: 0
>usbbus: 2
>usblevel: 1
>usbport: 0
>usbdev: 2
>vendorId: 045e
>deviceId: 00f5
>usbprod: USB camera
>-
>class: OTHER
>bus: PSAUX
>detached: 0
>desc: "Wacom Volito2 4x5"
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: tg3
>desc: "Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express"
>network.hwaddr: 00:14:22:4f:e2:22
>vendorId: 14e4
>deviceId: 1677
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  2
>pcidev:  0
>pcifn:  0
>-
>class: MOUSE
>bus: USB
>detached: 0
>driver: wacom
>desc: "WACOM CTF-420 V2.0-0"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 3
>usblevel: 1
>usbport: 1
>usbdev: 2
>vendorId: 056a
>deviceId: 0062
>usbmfr: WACOM
>usbprod: CTF-420 V2.0-0
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: generic3ps/2
>desc: "Macintosh mouse button emulation"
>-
>class: MOUSE
>bus: USB
>detached: 0
>device: input/mice
>driver: genericwheelusb
>desc: "Unknown USB device 0x413c:0x3010"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 1
>usblevel: 1
>usbport: 0
>usbdev: 4
>vendorId: 413c
>deviceId: 3010
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-intel8x0
>desc: "Intel Corporation 82801G (ICH7 Family) AC'97 Audio Controller"
>vendorId: 8086
>deviceId: 27de
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1e
>pcifn:  2
>-
>class: AUDIO
>bus: USB
>detached: 0
>desc: "USB camera"
>usbclass: 1
>usbsubclass: 2
>usbprotocol: 0
>usbbus: 2
>usblevel: 1
>usbport: 0
>usbdev: 2
>vendorId: 045e
>deviceId: 00f5
>usbprod: USB camera
>-
>class: CDROM
>bus: SCSI
>detached: 0
>device: scd0
>desc: "_NEC DVD+-RW ND-3530A"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: VIDEO
>bus: PCI
>detached: 0
>desc: "ATI Technologies Inc RV380 [Radeon X600]"
>video.xdriver: radeon
>vendorId: 1002
>deviceId: 5b72
>subVendorId: 1002
>subDeviceId: 0b03
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  1
>-
>class: VIDEO
>bus: PCI
>detached: 0
>driver: radeonfb
>desc: "ATI Technologies Inc RV380 [Radeon X600 (PCIE)]"
>video.xdriver: radeon
>vendorId: 1002
>deviceId: 5b62
>subVendorId: 1002
>subDeviceId: 0b02
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "ATA WDC WD2500JS-75N"
>host: 2
>id: 0
>channel: 0
>lun: 0
>-
>class: KEYBOARD
>bus: USB
>detached: 0
>driver: keybdev
>desc: "Dell Dell USB Keyboard"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 1
>usblevel: 1
>usbport: 1
>usbdev: 5
>vendorId: 413c
>deviceId: 2003
>usbmfr: Dell
>usbprod: Dell USB Keyboard
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller"
>vendorId: 8086
>deviceId: 27cc
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  7
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4"
>vendorId: 8086
>deviceId: 27cb
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  3
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3"
>vendorId: 8086
>deviceId: 27ca
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2"
>vendorId: 8086
>deviceId: 27c9
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: uhci-hcd
>desc: "Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1"
>vendorId: 8086
>deviceId: 27c8
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1d
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_piix
>desc: "Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller"
>vendorId: 8086
>deviceId: 27c0
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  2
>-
>class: IDE
>bus: PCI
>detached: 0
>driver: ata_piix
>desc: "Intel Corporation 82801G (ICH7 Family) IDE Controller"
>vendorId: 8086
>deviceId: 27df
>subVendorId: 1028
>subDeviceId: 01ad
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 1f
>pcifn:  1
>
>------- dmesg --------
>Linux version 2.6.20-1.3104.fc7 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070418 (Red Hat 4.1.2-10)) #1 SMP Sat Apr 21 22:02:46 EDT 2007
>Command line: ro root=LABEL=/ rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000dfe86c00 (usable)
> BIOS-e820: 00000000dfe86c00 - 00000000dfe88c00 (ACPI NVS)
> BIOS-e820: 00000000dfe88c00 - 00000000dfe8ac00 (ACPI data)
> BIOS-e820: 00000000dfe8ac00 - 00000000e0000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917126) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FEB00, 0024 (r2 DELL  )
>ACPI: XSDT 000FD253, 005C (r1 DELL    GX620          7 ASL        61)
>ACPI: FACP 000FD34B, 00F4 (r3 DELL    GX620          7 ASL        61)
>ACPI: DSDT FFFD2B0C, 3D69 (r1   DELL    dt_ex     1000 INTL 20050309)
>ACPI: FACS DFE86C00, 0040
>ACPI: SSDT FFFD6994, 00AA (r1   DELL    st_ex     1000 INTL 20050309)
>ACPI: APIC 000FD43F, 0072 (r1 DELL    GX620          7 ASL        61)
>ACPI: BOOT 000FD4B1, 0028 (r1 DELL    GX620          7 ASL        61)
>ACPI: ASF! 000FD4D9, 0067 (r16 DELL    GX620          7 ASL        61)
>ACPI: MCFG 000FD540, 003E (r1 DELL    GX620          7 ASL        61)
>ACPI: HPET 000FD57E, 0038 (r1 DELL    GX620          7 ASL        61)
>No NUMA configuration found
>Faking a node at 0000000000000000-00000000dfe86000
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 917126) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-00000000dfe86000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      160
>    0:      256 ->   917126
>On node 0 totalpages: 917030
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2366 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 19615 pages used for memmap
>  DMA32 zone: 893415 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at e1000000 (gap: e0000000:10000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 894961
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 3192.006 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 3570052k/3668504k available (2465k kernel code, 98068k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 6389.21 BogoMIPS (lpj=3194608)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12468723
>Detected 12.468 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6384.04 BogoMIPS (lpj=3192022)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) D CPU 3.20GHz stepping 07
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=473
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH6 GPIO
>0000:00:1f.1: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.1: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0170 to 0170
>0000:00:1f.1: trying to change BAR3 from 0374 to 0374
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:01: ioport range 0x800-0x85f has been reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff could not be reserved
>pnp: 00:08: iomem range 0x0-0x9ffff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:08: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:08: iomem range 0x1000000-0xdfe86bff could not be reserved
>pnp: 00:08: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:09: ioport range 0x100-0x1fe could not be reserved
>pnp: 00:09: ioport range 0x200-0x277 has been reserved
>pnp: 00:09: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:09: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:09: ioport range 0x300-0x377 could not be reserved
>pnp: 00:09: ioport range 0x380-0x3bb has been reserved
>pnp: 00:09: ioport range 0x3c0-0x3e7 could not be reserved
>pnp: 00:09: ioport range 0x3f6-0x3f7 could not be reserved
>pnp: 00:09: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fe900000-feafffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: fe700000-fe7fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3040k freed
>Simple Boot Flag at 0x7a set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1177937215.776:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 86AF745E898D6960
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> <6>usb 1-1: new low speed USB device using uhci_hcd and address 2
>GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/all, error -71
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata2: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>scsi0 : ata_piix
>ata1.00: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/33
>scsi1 : ata_piix
>ata2: port disabled. ignoring.
>scsi 0:0:0:0: CD-ROM            _NEC     DVD+-RW ND-3530A 103C PQ: 0 ANSI: 5
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata3: SATA max UDMA/133 cmd 0x000000000001fe00 ctl 0x000000000001fe12 bmdma 0x000000000001fea0 irq 20
>ata4: SATA max UDMA/133 cmd 0x000000000001fe20 ctl 0x000000000001fe32 bmdma 0x000000000001fea8 irq 20
>scsi2 : ata_piix
>ata3.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
>ata3.00: ATA-7: WDC WD2500JS-75NCB1, 10.02E01, max UDMA/133
>ata3.00: 488281250 sectors, multi 8: LBA48 NCQ (depth 0/32)
>ata3.00: ata_hpa_resize 1: sectors = 488281250, hpa_sectors = 488281250
>ata3.00: configured for UDMA/133
>scsi3 : ata_piix
>scsi 2:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 < sda5 sda6 >
>sd 2:0:0:0: Attached scsi disk sda
>usb 5-5: new high speed USB device using ehci_hcd and address 6
>usb 5-5: configuration #1 chosen from 1 choice
>hub 5-5:1.0: USB hub found
>hub 5-5:1.0: 4 ports detected
>usb 3-2: new low speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>usb 1-1: new low speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>input: HID 413c:3010 as /class/input/input1
>input: USB HID v1.10 Mouse [HID 413c:3010] on usb-0000:00:1d.0-1
>usb 1-2: new low speed USB device using uhci_hcd and address 5
>usb 1-2: configuration #1 chosen from 1 choice
>input: Dell Dell USB Keyboard as /class/input/input2
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.0-2
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>usb 2-2: new full speed USB device using uhci_hcd and address 3
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 2-2: configuration #1 chosen from 1 choice
>security:  3 users, 6 roles, 1801 types, 76 bools, 1 sens, 1024 cats
>security:  60 classes, 65047 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda5, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1177937221.543:2): policy loaded auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>Floppy drive(s): fd0 is 1.44M
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>input: PC Speaker as /class/input/input3
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:05 failed with error -16
>input: Wacom Volito2 4x5 as /class/input/input4
>tg3.c:v3.75 (March 23, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>usbcore: registered new interface driver wacom
>drivers/usb/input/wacom_sys.c: v1.46:USB Wacom Graphire and Wacom Intuos tablet driver
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>eth0: Tigon3 [partno(BCM5751PKFBG) rev 4001 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:14:22:4f:e2:22
>eth0: RXcsums[1] LinkChgREG[1] MIirq[1] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>usbcore: registered new interface driver snd-usb-audio
>cannot find the slot for index 0 (range 0-0), error: -16
>Intel ICH: probe of 0000:00:1e.2 failed with error -12
>audit(1177933628.884:3): avc:  denied  { search } for  pid=1183 comm="salsa" name="root" dev=sda5 ino=65409 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
>audit(1177933628.884:4): avc:  denied  { search } for  pid=1196 comm="salsa" name="root" dev=sda5 ino=65409 scontext=system_u:system_r:udev_t:s0-s0:c0.c1023 tcontext=system_u:object_r:default_t:s0 tclass=dir
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>audit(1177933642.667:5): avc:  denied  { search } for  pid=1243 comm="rhgb" name="root" dev=sda5 ino=65409 scontext=system_u:system_r:rhgb_t:s0 tcontext=system_u:object_r:default_t:s0 tclass=dir
>No dock devices found.
>ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda5, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.8)
>audit(1177933646.498:6): avc:  denied  { use } for  pid=1405 comm="fusermount" name="console" dev=tmpfs ino=940 scontext=system_u:system_r:fusermount_t:s0 tcontext=system_u:system_r:init_t:s0 tclass=fd
>SELinux: initialized (dev sda2, type fuseblk), uses genfs_contexts
>Adding 2040212k swap on /dev/sda6.  Priority:-1 extents:1 across:2040212k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>audit(1177933667.533:7): user pid=2141 uid=81 auid=4294967295 subj=system_u:system_r:system_dbusd_t:s0 msg='avc:  received policyload notice (seqno=2)
>: exe="?" (sauid=81, hostname=?, addr=?, terminal=?)'
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs
>SELinux: initialized (dev 0:12, type nfs), uses genfs_contexts
>opera[3014]: segfault at 0000000000000000 rip 0000000008072358 rsp 00000000fff7d210 error 4
>opera[3044]: segfault at 0000000000000000 rip 0000000008072358 rsp 00000000ffe4ee20 error 4
>opera[3149]: segfault at 0000000000000000 rip 0000000008072358 rsp 00000000ffe7b650 error 4
>

Actions: View

Attachments on bug 238427: 153791 | 153793