Attachment 153829 Details for Bug 238304 – dmesg for bug 238304

dmesg for bug 238304

re238304.txt (text/plain), 39.90 KB, created by Nick Sharp on 2007-04-30 21:34:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Nick Sharp

Created: 2007-04-30 21:34:16 UTC

Size: 39.90 KB

patch

obsolete

>Linux version 2.6.20-1.3017.fc7 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 23:00:37 EDT 2007
>Command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe8cc00 (usable)
> BIOS-e820: 000000007fe8cc00 - 000000007fe8ec00 (ACPI NVS)
> BIOS-e820: 000000007fe8ec00 - 000000007fe90c00 (ACPI data)
> BIOS-e820: 000000007fe90c00 - 0000000080000000 (reserved)
> BIOS-e820: 00000000d0000000 - 00000000d4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523916) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.3 present.
>ACPI: RSDP 000FEB00, 0024 (r2 DELL  )
>ACPI: XSDT 000FD25F, 005C (r1 DELL    DXP051         7 ASL        61)
>ACPI: FACP 000FD357, 00F4 (r3 DELL    DXP051         7 ASL        61)
>ACPI: DSDT FFFC7BFE, 32B9 (r1   DELL    dt_ex     1000 INTL 20050309)
>ACPI: FACS 7FE8CC00, 0040
>ACPI: SSDT FFFCAFD8, 00AC (r1   DELL    st_ex     1000 INTL 20050309)
>ACPI: APIC 000FD44B, 0072 (r1 DELL    DXP051         7 ASL        61)
>ACPI: BOOT 000FD4BD, 0028 (r1 DELL    DXP051         7 ASL        61)
>ACPI: ASF! 000FD4E5, 0067 (r16 DELL    DXP051         7 ASL        61)
>ACPI: MCFG 000FD54C, 003E (r1 DELL    DXP051         7 ASL        61)
>ACPI: HPET 000FD58A, 0038 (r1 DELL    DXP051         7 ASL        61)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fe8c000
>Entering add_active_range(0, 0, 160) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523916) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fe8c000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      160
>    0:      256 ->   523916
>On node 0 totalpages: 523820
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2366 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11168 pages used for memmap
>  DMA32 zone: 508652 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled)
>ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:50000000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510198
>Kernel command line: initrd=initrd.img rescue BOOT_IMAGE=vmlinuz 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 3191.994 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2031620k/2095664k available (2461k kernel code, 63660k reserved, 1444k data, 332k init)
>Calibrating delay using timer specific routine.. 6389.24 BogoMIPS (lpj=3194624)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12468682
>Detected 12.468 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 6384.05 BogoMIPS (lpj=3192029)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM1)
>              Intel(R) Pentium(R) D CPU 3.20GHz stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=1008
>PM: Adding info for No Bus:platform
>NET: Registered protocol family 16
>PM: Adding info for No Bus:vtcon0
>ACPI: bus type pci registered
>PCI: Found Intel Corporation 945G/GZ/P/PL Express Memory Controller Hub with MMCONFIG support.
>PCI: Using MMCONFIG at d0000000 - d3ffffff
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>PM: Adding info for acpi:acpi_system:00
>PM: Adding info for acpi:button_power:00
>PM: Adding info for acpi:ACPI0007:00
>PM: Adding info for acpi:ACPI0007:01
>PM: Adding info for acpi:ACPI0007:02
>PM: Adding info for acpi:ACPI0007:03
>PM: Adding info for acpi:device:00
>PM: Adding info for acpi:PNP0C0C:00
>PM: Adding info for acpi:PNP0A03:00
>PM: Adding info for acpi:device:01
>PM: Adding info for acpi:device:02
>PM: Adding info for acpi:device:03
>PM: Adding info for acpi:device:04
>PM: Adding info for acpi:device:05
>PM: Adding info for acpi:device:06
>PM: Adding info for acpi:device:07
>PM: Adding info for acpi:PNP0C01:00
>PM: Adding info for acpi:PNP0200:00
>PM: Adding info for acpi:PNP0C04:00
>PM: Adding info for acpi:PNP0000:00
>PM: Adding info for acpi:PNP0800:00
>PM: Adding info for acpi:PNP0B00:00
>PM: Adding info for acpi:PNP0100:00
>PM: Adding info for acpi:device:08
>PM: Adding info for acpi:device:09
>PM: Adding info for acpi:device:0a
>PM: Adding info for acpi:device:0b
>PM: Adding info for acpi:PNP0C0F:00
>PM: Adding info for acpi:PNP0C0F:01
>PM: Adding info for acpi:PNP0C0F:02
>PM: Adding info for acpi:PNP0C0F:03
>PM: Adding info for acpi:PNP0C0F:04
>PM: Adding info for acpi:PNP0C0F:05
>PM: Adding info for acpi:PNP0C0F:06
>PM: Adding info for acpi:PNP0C0F:07
>PM: Adding info for acpi:PNP0C01:01
>PM: Adding info for acpi:PNP0C02:00
>PM: Adding info for acpi:AWY0001:00
>PM: Adding info for acpi:thermal:00
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PM: Adding info for No Bus:pci0000:00
>0000:00:1f.1: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.1: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0170 to 0170
>0000:00:1f.1: trying to change BAR3 from 0374 to 0374
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI6._PRT]
>PM: Adding info for pci:0000:00:00.0
>PM: Adding info for pci:0000:00:01.0
>PM: Adding info for pci:0000:00:1b.0
>PM: Adding info for pci:0000:00:1c.0
>PM: Adding info for pci:0000:00:1c.4
>PM: Adding info for pci:0000:00:1c.5
>PM: Adding info for pci:0000:00:1d.0
>PM: Adding info for pci:0000:00:1d.1
>PM: Adding info for pci:0000:00:1d.2
>PM: Adding info for pci:0000:00:1d.3
>PM: Adding info for pci:0000:00:1d.7
>PM: Adding info for pci:0000:00:1e.0
>PM: Adding info for pci:0000:00:1f.0
>PM: Adding info for pci:0000:00:1f.1
>PM: Adding info for pci:0000:00:1f.2
>PM: Adding info for pci:0000:00:1f.3
>PM: Adding info for pci:0000:01:00.0
>PM: Adding info for pci:0000:04:00.0
>PM: Adding info for pci:0000:05:02.0
>PM: Adding info for pci:0000:05:04.0
>PM: Adding info for pci:0000:05:05.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>PM: Adding info for No Bus:pnp0
>PM: Adding info for pnp:00:00
>PM: Adding info for pnp:00:01
>PM: Adding info for pnp:00:02
>PM: Adding info for pnp:00:03
>PM: Adding info for pnp:00:04
>PM: Adding info for pnp:00:05
>PM: Adding info for pnp:00:06
>PM: Adding info for pnp:00:07
>pnp: PnP ACPI: found 8 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:01: ioport range 0x800-0x85f has been reserved
>pnp: 00:01: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:01: ioport range 0x860-0x8ff has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:06: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:06: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:06: iomem range 0x1000000-0x7fe8cbff could not be reserved
>pnp: 00:06: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:07: ioport range 0x100-0x1fe could not be reserved
>pnp: 00:07: ioport range 0x200-0x277 has been reserved
>pnp: 00:07: ioport range 0x280-0x2e7 has been reserved
>pnp: 00:07: ioport range 0x2e8-0x2ef has been reserved
>pnp: 00:07: ioport range 0x2f0-0x2f7 has been reserved
>pnp: 00:07: ioport range 0x2f8-0x2ff has been reserved
>pnp: 00:07: ioport range 0x300-0x377 could not be reserved
>pnp: 00:07: ioport range 0x380-0x3bb has been reserved
>pnp: 00:07: iomem range 0xd0000000-0xd3ffffff has been reserved
>pnp: 00:07: iomem range 0xfeda0000-0xfedacfff has been reserved
>PM: Adding info for No Bus:mem
>PM: Adding info for No Bus:null
>PM: Adding info for No Bus:port
>PM: Adding info for No Bus:zero
>PM: Adding info for No Bus:full
>PM: Adding info for No Bus:random
>PM: Adding info for No Bus:urandom
>PM: Adding info for No Bus:kmsg
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fc000000-feafffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: fbf00000-fbffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.4
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.5
>  IO window: d000-dfff
>  MEM window: fb800000-fbefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fb700000-fb7fffff
>  PREFETCH window: f0000000-f3ffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 5626k freed
>Simple Boot Flag at 0x7a set to 0x1
>PM: Adding info for No Bus:mcelog
>PM: Adding info for No Bus:msr0
>PM: Adding info for No Bus:msr1
>PM: Adding info for No Bus:cpu0
>PM: Adding info for No Bus:cpu1
>PM: Adding info for platform:pcspkr
>PM: Adding info for No Bus:snapshot
>audit: initializing netlink socket (disabled)
>audit(1177967698.786:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F3B9BE0EB7EAFE4F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PM: Adding info for pci_express:0000:00:01.0:pcie00
>Allocate Port Service[0000:00:01.0:pcie03]
>PM: Adding info for pci_express:0000:00:01.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PM: Adding info for pci_express:0000:00:1c.0:pcie00
>Allocate Port Service[0000:00:1c.0:pcie02]
>PM: Adding info for pci_express:0000:00:1c.0:pcie02
>Allocate Port Service[0000:00:1c.0:pcie03]
>PM: Adding info for pci_express:0000:00:1c.0:pcie03
>PCI: Setting latency timer of device 0000:00:1c.4 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.4:pcie00]
>PM: Adding info for pci_express:0000:00:1c.4:pcie00
>Allocate Port Service[0000:00:1c.4:pcie02]
>PM: Adding info for pci_express:0000:00:1c.4:pcie02
>Allocate Port Service[0000:00:1c.4:pcie03]
>PM: Adding info for pci_express:0000:00:1c.4:pcie03
>PCI: Setting latency timer of device 0000:00:1c.5 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.5:pcie00]
>PM: Adding info for pci_express:0000:00:1c.5:pcie00
>Allocate Port Service[0000:00:1c.5:pcie02]
>PM: Adding info for pci_express:0000:00:1c.5:pcie02
>Allocate Port Service[0000:00:1c.5:pcie03]
>PM: Adding info for pci_express:0000:00:1c.5:pcie03
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>PM: Adding info for platform:vesafb.0
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>PM: Adding info for No Bus:tty
>PM: Adding info for No Bus:console
>PM: Adding info for No Bus:ptmx
>PM: Adding info for No Bus:tty0
>PM: Adding info for No Bus:vcs
>PM: Adding info for No Bus:vcsa
>PM: Adding info for No Bus:tty1
>PM: Adding info for No Bus:tty2
>PM: Adding info for No Bus:tty3
>PM: Adding info for No Bus:tty4
>PM: Adding info for No Bus:tty5
>PM: Adding info for No Bus:tty6
>PM: Adding info for No Bus:tty7
>PM: Adding info for No Bus:tty8
>PM: Adding info for No Bus:tty9
>PM: Adding info for No Bus:tty10
>PM: Adding info for No Bus:tty11
>PM: Adding info for No Bus:tty12
>PM: Adding info for No Bus:tty13
>PM: Adding info for No Bus:tty14
>PM: Adding info for No Bus:tty15
>PM: Adding info for No Bus:tty16
>PM: Adding info for No Bus:tty17
>PM: Adding info for No Bus:tty18
>PM: Adding info for No Bus:tty19
>PM: Adding info for No Bus:tty20
>PM: Adding info for No Bus:tty21
>PM: Adding info for No Bus:tty22
>PM: Adding info for No Bus:tty23
>PM: Adding info for No Bus:tty24
>PM: Adding info for No Bus:tty25
>PM: Adding info for No Bus:tty26
>PM: Adding info for No Bus:tty27
>PM: Adding info for No Bus:tty28
>PM: Adding info for No Bus:tty29
>PM: Adding info for No Bus:tty30
>PM: Adding info for No Bus:tty31
>PM: Adding info for No Bus:tty32
>PM: Adding info for No Bus:tty33
>PM: Adding info for No Bus:tty34
>PM: Adding info for No Bus:tty35
>PM: Adding info for No Bus:tty36
>PM: Adding info for No Bus:tty37
>PM: Adding info for No Bus:tty38
>PM: Adding info for No Bus:tty39
>PM: Adding info for No Bus:tty40
>PM: Adding info for No Bus:tty41
>PM: Adding info for No Bus:tty42
>PM: Adding info for No Bus:tty43
>PM: Adding info for No Bus:tty44
>PM: Adding info for No Bus:tty45
>PM: Adding info for No Bus:tty46
>PM: Adding info for No Bus:tty47
>PM: Adding info for No Bus:tty48
>PM: Adding info for No Bus:tty49
>PM: Adding info for No Bus:tty50
>PM: Adding info for No Bus:tty51
>PM: Adding info for No Bus:tty52
>PM: Adding info for No Bus:tty53
>PM: Adding info for No Bus:tty54
>PM: Adding info for No Bus:tty55
>PM: Adding info for No Bus:tty56
>PM: Adding info for No Bus:tty57
>PM: Adding info for No Bus:tty58
>PM: Adding info for No Bus:tty59
>PM: Adding info for No Bus:tty60
>PM: Adding info for No Bus:tty61
>PM: Adding info for No Bus:tty62
>PM: Adding info for No Bus:tty63
>PM: Adding info for No Bus:rtc
>Real Time Clock Driver v1.12ac
>PM: Adding info for No Bus:hpet
>PM: Adding info for No Bus:nvram
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>PM: Adding info for No Bus:agpgart
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PM: Adding info for platform:serial8250
>PM: Adding info for No Bus:ttyS0
>PM: Adding info for No Bus:ttyS1
>PM: Adding info for No Bus:ttyS2
>PM: Adding info for No Bus:ttyS3
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>PM: Adding info for No Bus:lo
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>PM: Adding info for platform:i8042
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>PM: Adding info for serio:serio0
>PM: Adding info for serio:serio1
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1057k
>PM: Adding info for No Bus:vcs1
>PM: Adding info for No Bus:vcsa1
>PM: Adding info for No Bus:vcs4
>PM: Adding info for No Bus:vcsa4
>PM: Adding info for No Bus:vcs9
>PM: Adding info for No Bus:vcsa9
>PM: Removing info for No Bus:vcs9
>PM: Removing info for No Bus:vcsa9
>PM: Adding info for No Bus:vcs8
>PM: Adding info for No Bus:vcsa8
>PM: Removing info for No Bus:vcs8
>PM: Removing info for No Bus:vcsa8
>PM: Adding info for No Bus:vcs7
>PM: Adding info for No Bus:vcsa7
>PM: Removing info for No Bus:vcs7
>PM: Removing info for No Bus:vcsa7
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>PM: Adding info for No Bus:vcs5
>PM: Adding info for No Bus:vcsa5
>PM: Removing info for No Bus:vcs5
>PM: Removing info for No Bus:vcsa5
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>PM: Removing info for No Bus:vcs2
>PM: Removing info for No Bus:vcsa2
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>loop: loaded (max 8 devices)
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
>input: PC Speaker as /class/input/input1
>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>PM: Adding info for usb:usb1
>PM: Adding info for No Bus:usbdev1.1_ep00
>usb usb1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-0:1.0
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 8 ports detected
>PM: Adding info for No Bus:usbdev1.1_ep81
>PM: Adding info for No Bus:usbdev1.1
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ff80
>PM: Adding info for usb:usb2
>PM: Adding info for No Bus:usbdev2.1_ep00
>usb usb2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-0:1.0
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev2.1_ep81
>PM: Adding info for No Bus:usbdev2.1
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x0000ff60
>PM: Adding info for usb:usb3
>PM: Adding info for No Bus:usbdev3.1_ep00
>usb usb3: configuration #1 chosen from 1 choice
>PM: Adding info for usb:3-0:1.0
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>PM: Adding info for No Bus:usbdev3.1_ep81
>PM: Adding info for No Bus:usbdev3.1
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>PM: Adding info for usb:usb4
>PM: Adding info for No Bus:usbdev4.1_ep00
>usb usb4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-0:1.0
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-4: new high speed USB device using ehci_hcd and address 3
>PM: Adding info for No Bus:usbdev4.1_ep81
>PM: Adding info for No Bus:usbdev4.1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000ff20
>PM: Adding info for usb:usb5
>PM: Adding info for No Bus:usbdev5.1_ep00
>usb usb5: configuration #1 chosen from 1 choice
>PM: Adding info for usb:5-0:1.0
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>PM: Adding info for usb:1-4
>PM: Adding info for No Bus:usbdev1.3_ep00
>usb 1-4: configuration #1 chosen from 1 choice
>PM: Adding info for usb:1-4:1.0
>PM: Adding info for No Bus:usbdev1.3_ep01
>PM: Adding info for No Bus:usbdev1.3_ep82
>PM: Adding info for No Bus:usbdev1.3
>PM: Adding info for No Bus:usbdev5.1_ep81
>PM: Adding info for No Bus:usbdev5.1
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>PM: Adding info for usb:2-1
>PM: Adding info for No Bus:usbdev2.2_ep00
>usb 2-1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:2-1:1.0
>input: USB Optical Mouse as /class/input/input2
>input: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:1d.0-1
>PM: Adding info for No Bus:usbdev2.2_ep81
>PM: Adding info for No Bus:usbdev2.2
>usb 4-1: new full speed USB device using uhci_hcd and address 2
>PM: Adding info for usb:4-1
>PM: Adding info for No Bus:usbdev4.2_ep00
>usb 4-1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-1:1.0
>hub 4-1:1.0: USB hub found
>hub 4-1:1.0: 3 ports detected
>PM: Adding info for No Bus:usbdev4.2_ep81
>PM: Adding info for No Bus:usbdev4.2
>usb 4-2: new full speed USB device using uhci_hcd and address 3
>PM: Adding info for usb:4-2
>PM: Adding info for No Bus:usbdev4.3_ep00
>usb 4-2: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-2:1.0
>PM: Adding info for No Bus:usbdev4.3_ep01
>PM: Adding info for No Bus:usbdev4.3_ep81
>PM: Adding info for No Bus:usbdev4.3
>usb 4-1.1: new full speed USB device using uhci_hcd and address 4
>PM: Adding info for usb:4-1.1
>PM: Adding info for No Bus:usbdev4.4_ep00
>usb 4-1.1: configuration #1 chosen from 1 choice
>PM: Adding info for usb:4-1.1:1.0
>input: Dell Dell USB Keyboard as /class/input/input3
>input: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1
>PM: Adding info for No Bus:usbdev4.4_ep81
>PM: Adding info for usb:4-1.1:1.1
>input: Dell Dell USB Keyboard as /class/input/input4
>input: USB HID v1.10 Device [Dell Dell USB Keyboard] on usb-0000:00:1d.2-1.1
>PM: Adding info for No Bus:usbdev4.4_ep82
>PM: Adding info for No Bus:usbdev4.4
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host0
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device scan complete
>PM: Adding info for No Bus:target0:0:0
>scsi 0:0:0:0: Direct-Access     Maxtor   3200             0344 PQ: 0 ANSI: 4
>PM: Adding info for No Bus:target0:0:1
>PM: Removing info for No Bus:target0:0:1
>PM: Adding info for No Bus:target0:0:2
>PM: Removing info for No Bus:target0:0:2
>PM: Adding info for No Bus:target0:0:3
>PM: Removing info for No Bus:target0:0:3
>PM: Adding info for No Bus:target0:0:4
>PM: Removing info for No Bus:target0:0:4
>PM: Adding info for No Bus:target0:0:5
>PM: Removing info for No Bus:target0:0:5
>PM: Adding info for No Bus:target0:0:6
>PM: Removing info for No Bus:target0:0:6
>PM: Adding info for No Bus:target0:0:7
>PM: Removing info for No Bus:target0:0:7
>PM: Adding info for scsi:0:0:0:0
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 17 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 976773168 512-byte hdwr sectors (500108 MB)
>sda: Write Protect is off
>sda: Mode Sense: 17 00 00 00
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt 0000:05:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>fw_ohci: Added fw-ohci device 0000:05:04.0, OHCI version 1.0
>PM: Adding info for firewire:fw0
>fw_core: created new fw device fw0 (0 config rom retries)
>usbcore: deregistering interface driver usb-storage
>PM: Removing info for scsi:0:0:0:0
>PM: Removing info for No Bus:target0:0:0
>PM: Removing info for No Bus:host0
>PM: Removing info for No Bus:usbdev1.3_ep01
>PM: Removing info for No Bus:usbdev1.3_ep82
>PM: Adding info for No Bus:usbdev1.3_ep01
>PM: Adding info for No Bus:usbdev1.3_ep82
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>e1000: 0000:04:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:13:72:1c:88:54
>PM: Adding info for No Bus:eth0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>libata version 2.20 loaded.
>ahci 0000:00:1f.2: version 2.1
>ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xffffc2000002cd00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata2: SATA max UDMA/133 cmd 0xffffc2000002cd80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata3: SATA max UDMA/133 cmd 0xffffc2000002ce00 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>ata4: SATA max UDMA/133 cmd 0xffffc2000002ce80 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 2299
>scsi1 : ahci
>PM: Adding info for No Bus:host1
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7: WDC WD2500JS-75NCB2, 10.02E03, max UDMA/133
>ata1.00: 488281250 sectors, multi 0: LBA48 
>ata1.00: configured for UDMA/133
>scsi2 : ahci
>PM: Adding info for No Bus:host2
>ata2: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>PM: Adding info for No Bus:host3
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7: WDC WD2500JS-75NCB2, 10.02E03, max UDMA/133
>ata3.00: 488281250 sectors, multi 0: LBA48 
>ata3.00: configured for UDMA/133
>scsi4 : ahci
>PM: Adding info for No Bus:host4
>ata4: SATA link down (SStatus 0 SControl 300)
>PM: Adding info for No Bus:target1:0:0
>scsi 1:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
>PM: Adding info for scsi:1:0:0:0
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: Attached scsi disk sda
>PM: Adding info for No Bus:target3:0:0
>scsi 3:0:0:0: Direct-Access     ATA      WDC WD2500JS-75N 10.0 PQ: 0 ANSI: 5
>PM: Adding info for scsi:3:0:0:0
>SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 3:0:0:0: Attached scsi disk sdb
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001ffa0 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001ffa8 irq 15
>scsi5 : ata_piix
>PM: Adding info for No Bus:host5
>ata5.00: ATAPI, max UDMA/33
>ata5.01: ATAPI, max UDMA/33
>ata5.00: configured for UDMA/33
>ata5.01: configured for UDMA/33
>scsi6 : ata_piix
>PM: Adding info for No Bus:host6
>ata6: port disabled. ignoring.
>PM: Adding info for No Bus:target5:0:0
>scsi 5:0:0:0: CD-ROM            TSSTcorp DVD-ROM TS-H352C DE02 PQ: 0 ANSI: 5
>PM: Adding info for scsi:5:0:0:0
>sr0: scsi3-mmc drive: 16x/16x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 5:0:0:0: Attached scsi CD-ROM sr0
>PM: Adding info for No Bus:target5:0:1
>scsi 5:0:1:0: CD-ROM            PHILIPS  DVD+-RW DVD8801  2D06 PQ: 0 ANSI: 5
>PM: Adding info for scsi:5:0:1:0
>sr1: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>sr 5:0:1:0: Attached scsi CD-ROM sr1
>Initializing USB Mass Storage driver...
>scsi7 : SCSI emulation for USB Mass Storage devices
>PM: Adding info for No Bus:host7
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>ISO 9660 Extensions: Microsoft Joliet Level 3
>Unable to load NLS charset utf8
>Unable to load NLS charset utf8
>ISO 9660 Extensions: RRIP_1991A
>usb-storage: device scan complete
>PM: Adding info for No Bus:target7:0:0
>usb 1-4: reset high speed USB device using ehci_hcd and address 3
>PM: Removing info for No Bus:usbdev1.3_ep01
>PM: Removing info for No Bus:usbdev1.3_ep82
>PM: Adding info for No Bus:usbdev1.3_ep01
>PM: Adding info for No Bus:usbdev1.3_ep82
>scsi 7:0:0:0: Direct-Access     Maxtor   3200             0344 PQ: 0 ANSI: 4
>PM: Adding info for No Bus:target7:0:1
>PM: Removing info for No Bus:target7:0:1
>PM: Adding info for No Bus:target7:0:2
>PM: Removing info for No Bus:target7:0:2
>PM: Adding info for No Bus:target7:0:3
>PM: Removing info for No Bus:target7:0:3
>PM: Adding info for No Bus:target7:0:4
>PM: Removing info for No Bus:target7:0:4
>PM: Adding info for No Bus:target7:0:5
>PM: Removing info for No Bus:target7:0:5
>PM: Adding info for No Bus:target7:0:6
>PM: Removing info for No Bus:target7:0:6
>PM: Adding info for No Bus:target7:0:7
>PM: Removing info for No Bus:target7:0:7
>PM: Adding info for scsi:7:0:0:0
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 17 00 00 00
>sdc: assuming drive cache: write through
>SCSI device sdc: 976773168 512-byte hdwr sectors (500108 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 17 00 00 00
>sdc: assuming drive cache: write through
> sdc: sdc1 sdc2 sdc3
>sd 7:0:0:0: Attached scsi disk sdc
>Unable to identify CD-ROM format.
>VFS: Can't find an ext2 filesystem on dev loop0.
>security:  3 users, 6 roles, 1760 types, 94 bools, 1 sens, 1024 cats
>security:  60 classes, 63745 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1177967802.644:2): policy loaded auid=4294967295
>PM: Adding info for No Bus:vcs2
>PM: Adding info for No Bus:vcsa2
>md: raid0 personality registered for level 0
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  4860.000 MB/sec
>raid5: using function: generic_sse (4860.000 MB/sec)
>raid6: int64x1   1484 MB/s
>raid6: int64x2   1996 MB/s
>raid6: int64x4   1980 MB/s
>raid6: int64x8   1871 MB/s
>raid6: sse2x1    2347 MB/s
>raid6: sse2x2    3464 MB/s
>raid6: sse2x4    3324 MB/s
>raid6: using algorithm sse2x2 (3464 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>md: raid10 personality registered for level 10
>GFS2 (built Mar 22 2007 23:02:04) installed
>Lock_Nolock (built Mar 22 2007 23:02:14) installed
>JFS: nTxBlock = 8192, nTxLock = 65536
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>PM: Adding info for No Bus:device-mapper
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>device-mapper: multipath round-robin: version 1.0.0 loaded
>device-mapper: multipath emc: version 0.0.3 loaded
>PM: Removing info for No Bus:vcs3
>PM: Removing info for No Bus:vcsa3
>PM: Adding info for No Bus:vcs3
>PM: Adding info for No Bus:vcsa3
>audit(1177967805.773:3): audit_pid=828 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.20-1.3017.fc7 #1
>---------------------------------------------
>lvm/845 is trying to acquire lock:
> (&md->io_lock){----}, at: [<ffffffff8843595b>] dm_request+0x25/0x130 [dm_mod]
>
>but task is already holding lock:
> (&md->io_lock){----}, at: [<ffffffff8843595b>] dm_request+0x25/0x130 [dm_mod]
>
>other info that might help us debug this:
>1 lock held by lvm/845:
> #0:  (&md->io_lock){----}, at: [<ffffffff8843595b>] dm_request+0x25/0x130 [dm_mod]
>
>stack backtrace:
>
>Call Trace:
> [<ffffffff802a2c9e>] __lock_acquire+0x151/0xbd1
> [<ffffffff802a3b14>] lock_acquire+0x4c/0x65
> [<ffffffff8843595b>] :dm_mod:dm_request+0x25/0x130
> [<ffffffff8029e725>] down_read+0x3e/0x4a
> [<ffffffff8843595b>] :dm_mod:dm_request+0x25/0x130
> [<ffffffff8021bfa2>] generic_make_request+0x259/0x270
> [<ffffffff884344be>] :dm_mod:__map_bio+0xc0/0x11d
> [<ffffffff88434f7d>] :dm_mod:__split_bio+0x164/0x372
> [<ffffffff80263d40>] _spin_unlock_irq+0x2b/0x31
> [<ffffffff802633a6>] __down_read+0x3d/0xa1
> [<ffffffff88435a53>] :dm_mod:dm_request+0x11d/0x130
> [<ffffffff8021bfa2>] generic_make_request+0x259/0x270
> [<ffffffff80233fda>] submit_bio+0xcf/0xd8
> [<ffffffff802f4029>] dio_bio_submit+0x61/0x7a
> [<ffffffff802f4c58>] __blockdev_direct_IO+0x8d4/0xb45
> [<ffffffff802f39f5>] blkdev_direct_IO+0x49/0x4b
> [<ffffffff802f390e>] blkdev_get_blocks+0x0/0x9e
> [<ffffffff802c5060>] generic_file_direct_IO+0xd0/0x115
> [<ffffffff80216756>] generic_file_aio_read+0xc7/0x19b
> [<ffffffff8020d14d>] do_sync_read+0xe2/0x126
> [<ffffffff803248e8>] file_has_perm+0xa7/0xb6
> [<ffffffff8029c2eb>] autoremove_wake_function+0x0/0x38
> [<ffffffff8020b4d2>] vfs_read+0xcc/0x175
> [<ffffffff802114bc>] sys_read+0x47/0x6f
> [<ffffffff8025c2b5>] tracesys+0xdc/0xe1
>
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>XFS mounting filesystem sdc3
>Ending clean XFS mount for filesystem: sdc3
>SELinux: initialized (dev sdc3, type xfs), uses xattr
>SCSI device sda: 488281250 512-byte hdwr sectors (250000 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>SCSI device sdb: 488281250 512-byte hdwr sectors (250000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>XFS mounting filesystem sdc3
>Ending clean XFS mount for filesystem: sdc3
>SELinux: initialized (dev sdc3, type xfs), uses xattr
>PM: Adding info for No Bus:vcs6
>PM: Adding info for No Bus:vcsa6
>PM: Removing info for No Bus:vcs6
>PM: Removing info for No Bus:vcsa6
>XFS mounting filesystem sdc3
>Ending clean XFS mount for filesystem: sdc3
>SELinux: initialized (dev sdc3, type xfs), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdc1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdc1, type ext3), uses xattr
>Adding 4192956k swap on /dev/sdc2.  Priority:-1 extents:1 across:4192956k

Actions: View

Attachments on bug 238304: 153829