Attachment 153862 Details for Bug 235345 – lockdep error

lockdep error

iwlwifi.txt (text/plain), 28.16 KB, created by drago01 on 2007-05-01 14:08:42 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: drago01

Created: 2007-05-01 14:08:42 UTC

Size: 28.16 KB

patch

obsolete

>Linux version 2.6.21-1.3121 (dragoran@chello062178124144.3.13.univie.teleweb.at) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Tue May 1 14:18:06 CEST 2007
>Command line: ro root=LABEL=/ 3
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe80000 (usable)
> BIOS-e820: 000000007fe80000 - 000000007fe95000 (ACPI data)
> BIOS-e820: 000000007fe95000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523904) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI present.
>ACPI: RSDP 000F67F0, 0014 (r0 PTLTD )
>ACPI: RSDT 7FE8F286, 0044 (r1 PTLTD  Capell00  6040000  LTP        0)
>ACPI: FACP 7FE94DEE, 0074 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: DSDT 7FE8FEAC, 4F42 (r1 INVENT SYMPHONY  6040000 INTL 20050624)
>ACPI: FACS 7FE95FC0, 0040
>ACPI: APIC 7FE94E62, 0068 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: HPET 7FE94ECA, 0038 (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: MCFG 7FE94F02, 003C (r1 INTEL  CALISTGA  6040000 LOHR       5A)
>ACPI: BOOT 7FE94FD8, 0028 (r1 PTLTD  $SBFTBL$  6040000  LTP        1)
>ACPI: APIC 7FE94F70, 0068 (r1 TOSINV   APIC    6040000  LTP        0)
>ACPI: SSDT 7FE8FC9E, 020A (r1 SataRe SataAhci     1000 INTL 20050624)
>ACPI: SSDT 7FE8F2CA, 0500 (r1  PmRef    CpuPm     3000 INTL 20050624)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007fe80000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523904) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007fe80000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   523904
>On node 0 totalpages: 523807
>  DMA zone: 88 pages used for memmap
>  DMA zone: 2365 pages reserved
>  DMA zone: 1546 pages, LIFO batch:0
>  DMA32 zone: 11167 pages used for memmap
>  DMA32 zone: 508641 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000dc000
>Nosave address range: 00000000000dc000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 44672 bytes of per cpu data
>Built 1 zonelists.  Total pages: 510187
>Kernel command line: ro root=LABEL=/ 3
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2166.814 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1648 kB
> per task-struct memory footprint: 1680 bytes
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2035740k/2095616k available (2465k kernel code, 59488k reserved, 1445k data, 332k init)
>Calibrating delay using timer specific routine.. 4337.90 BogoMIPS (lpj=2168952)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring handled by SMI
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10417364
>Detected 10.417 MHz APIC timer.
>lockdep: not fixing up alternatives.
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4333.57 BogoMIPS (lpj=2166789)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=88 bytes
>sizeof(inode)=1008 bytes
>sizeof(dentry)=248 bytes
>sizeof(ext3inode)=1376 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=3776 bytes
>migration_cost=20
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #06 (-#09) is hidden behind transparent bridge #05 (-#05) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: Power Resource [FN00] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>Time: hpet clocksource has been installed.
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>pnp: 00:04: iomem range 0xfed00000-0xfed003ff could not be reserved
>pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
>pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
>PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 3000-3fff
>  MEM window: d4000000-d5ffffff
>  PREFETCH window: d0000000-d1ffffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 4000-4fff
>  MEM window: d6000000-d7ffffff
>  PREFETCH window: d2000000-d3ffffff
>PCI: Bus 6, cardbus bridge: 0000:05:06.0
>  IO window: 00005000-000050ff
>  IO window: 00005400-000054ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: da000000-da0fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:05:06.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:06.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1548k freed
>Simple Boot Flag at 0x36 set to 0x1
>audit: initializing netlink socket (disabled)
>audit(1178032886.598:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key CA2D3F12B855F345
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN0] (on)
>ACPI: SSDT 7FE8FA2B, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE8F7CA, 01DC (r1  PmRef  Cpu0Cst     3001 INTL 20050624)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FE8FC15, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050624)
>ACPI: SSDT 7FE8F9A6, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050624)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Invalid passive threshold
>ACPI: Thermal Zone [TZ00] (58 C)
>ACPI: Thermal Zone [TZVR] (57 C)
>ACPI: Thermal Zone [TZVL] (53 C)
>ACPI: Thermal Zone [TZCR] (56 C)
>ACPI: Thermal Zone [TZCL] (51 C)
>ACPI: Thermal Zone [TZ01] (56 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:05:06.0 [0000:0000]
>Yenta: Enabling burst memory read transactions
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:05:06.0, mfunc 0x01001000, devctl 0x66
>Yenta TI: socket 0000:05:06.0 probing PCI interrupt failed, trying to fix
>Yenta TI: socket 0000:05:06.0 falling back to parallel PCI interrupts
>Yenta TI: socket 0000:05:06.0 parallel PCI interrupts ok
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#05) from #05 to #09
>pcmcia: parent PCI bridge I/O window: 0x5000 - 0x5fff
>pcmcia: parent PCI bridge Memory window: 0xda000000 - 0xda0fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Freeing unused kernel memory: 332k freed
>Write protecting the kernel read-only data: 1058k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa0b1, caps: 0xa04713/0x20040a
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: AT Translated Set 2 keyboard as /class/input/input2
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xda304000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ahci 0000:00:1f.2: version 2.1
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB Optical Mouse as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech USB Optical Mouse] on usb-0000:00:1d.1-2
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xffffc2000003c500 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
>ata2: SATA max UDMA/133 cmd 0xffffc2000003c580 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
>ata3: SATA max UDMA/133 cmd 0xffffc2000003c600 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
>ata4: SATA max UDMA/133 cmd 0xffffc2000003c680 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
>scsi0 : ahci
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-7: HTS721080G9SA00, MC4OC10V, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      HTS721080G9SA00  MC4O PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1178032891.848:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1630 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51365 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1178032892.150:3): policy loaded auid=4294967295
>parport: PnPBIOS parport detected.
>pnp: Device 00:0a disabled.
>NET: Registered protocol family 23
>rtc_cmos 00:08: rtc core: registered rtc_cmos as rtc0
>rtc_cmos: probe of 00:08 failed with error -16
>PCI: Enabling device 0000:05:06.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:06.2[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:06.2 to 64
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: RTL8168b/8111b at 0xffffc200000c4000, 00:a0:d1:c1:69:c0, IRQ 16
>PCI: Enabling device 0000:05:06.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:05:06.1 to 64
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input4
>fw_ohci: Added fw-ohci device 0000:05:06.1, OHCI version 1.10
>iTCO_vendor_support: vendor-support=0
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000011880 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000011888 irq 15
>scsi4 : ata_piix
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>iwlwifi: Intel(R) Wireless Link driver for Linux, 0.0.15k
>iwlwifi: Copyright(c) 2003-2006 Intel Corporation
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ata5.00: ATAPI, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi5 : ata_piix
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            SONY     DVD RW DW-Q78A   SYS1 PQ: 0 ANSI: 5
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwlwifi: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC861, trying auto-probe from BIOS...
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iwlwifi: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwlwifi: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwlwifi: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'iwlwifi rate-scale'
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [ADP0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>fuse init (API version 7.8)
>SELinux: initialized (dev sda4, type fuseblk), uses genfs_contexts
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>SELinux: initialized (dev kvmfs, type kvmfs), uses genfs_contexts
>fw_core: created new fw device fw0 (0 config rom retries)
>
>=============================================
>[ INFO: possible recursive locking detected ]
>2.6.21-1.3121 #1
>---------------------------------------------
>wpa_supplicant/3288 is trying to acquire lock:
> (&dev->_xmit_lock){-...}, at: [<ffffffff88189ecb>] ieee80211_set_multicast_list+0x4b/0x1a2 [mac80211]
>
>but task is already holding lock:
> (&dev->_xmit_lock){-...}, at: [<ffffffff804123ea>] dev_mc_upload+0x19/0x46
>
>other info that might help us debug this:
>2 locks held by wpa_supplicant/3288:
> #0:  (rtnl_mutex){--..}, at: [<ffffffff802622fe>] mutex_lock+0x2a/0x2e
> #1:  (&dev->_xmit_lock){-...}, at: [<ffffffff804123ea>] dev_mc_upload+0x19/0x46
>
>stack backtrace:
>
>Call Trace:
> [<ffffffff802a2e6c>] __lock_acquire+0x151/0xbc4
> [<ffffffff802a3cd5>] lock_acquire+0x4c/0x65
> [<ffffffff88189ecb>] :mac80211:ieee80211_set_multicast_list+0x4b/0x1a2
> [<ffffffff80263a95>] _spin_lock+0x25/0x31
> [<ffffffff88189ecb>] :mac80211:ieee80211_set_multicast_list+0x4b/0x1a2
> [<ffffffff804122a1>] __dev_mc_upload+0x22/0x24
> [<ffffffff80412400>] dev_mc_upload+0x2f/0x46
> [<ffffffff80410cf9>] dev_open+0x54/0x79
> [<ffffffff8040f3e0>] dev_change_flags+0x5d/0x122
> [<ffffffff80444b52>] devinet_ioctl+0x259/0x5e9
> [<ffffffff804451a2>] inet_ioctl+0x71/0x8f
> [<ffffffff8040774e>] sock_ioctl+0x1db/0x1fc
> [<ffffffff802413cf>] do_ioctl+0x2a/0x77
> [<ffffffff80230b81>] vfs_ioctl+0x260/0x27d
> [<ffffffff80263527>] trace_hardirqs_on_thunk+0x35/0x37
> [<ffffffff8024bb5d>] sys_ioctl+0x5f/0x82
> [<ffffffff8025c11e>] system_call+0x7e/0x83
>
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:0d:0b:c3:bd:c9
>eth1: RX authentication from 00:0d:0b:c3:bd:c9 (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:0d:0b:c3:bd:c9
>eth1: RX AssocResp from 00:0d:0b:c3:bd:c9 (capab=0x411 status=0 aid=1)
>eth1: associated
>eth1: WMM queue=2 aci=0 acm=0 aifs=3 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=3 aci=1 acm=0 aifs=7 cWmin=15 cWmax=1023 burst=0
>eth1: WMM queue=1 aci=2 acm=0 aifs=2 cWmin=7 cWmax=15 burst=30
>eth1: WMM queue=0 aci=3 acm=0 aifs=2 cWmin=3 cWmax=7 burst=15
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>iwlwifi: REPLY_ADD_STA failed
>hwcrypto disabled!
>hwcrypto disabled!
>eth1: duplicate address detected!

Actions: View

Attachments on bug 235345: 153862