Attachment 154076 Details for Bug 238926 – system log

system log

f7t4-syslog.txt (text/plain), 33.52 KB, created by Jon Burgess on 2007-05-03 21:26:17 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jon Burgess

Created: 2007-05-03 21:26:17 UTC

Size: 33.52 KB

patch

obsolete

><5>Linux version 2.6.20-1.3104.fc7 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.2 20070418 (Red Hat 4.1.2-10)) #1 SMP Sat Apr 21 22:02:46 EDT 2007
><6>Command line: 
><6>BIOS-provided physical RAM map:
><4> BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
><4> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
><4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
><4> BIOS-e820: 0000000000100000 - 00000000cf6e0000 (usable)
><4> BIOS-e820: 00000000cf6e0000 - 00000000cf6e3000 (ACPI NVS)
><4> BIOS-e820: 00000000cf6e3000 - 00000000cf6f0000 (ACPI data)
><4> BIOS-e820: 00000000cf6f0000 - 00000000cf700000 (reserved)
><4> BIOS-e820: 00000000d0000000 - 00000000e0000000 (reserved)
><4> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
><4> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
><7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 849632) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
><4>end_pfn_map = 1245184
><6>DMI 2.4 present.
><4>ACPI: RSDP 000F6DA0, 0014 (r0 GBT   )
><4>ACPI: RSDT CF6E3040, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
><4>ACPI: FACP CF6E30C0, 0074 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
><4>ACPI: DSDT CF6E3180, 5222 (r1 GBT    GBTUACPI     1000 MSFT  100000C)
><4>ACPI: FACS CF6E0000, 0040
><4>ACPI: HPET CF6E8500, 0038 (r1 GBT    GBTUACPI 42302E31 GBTU       98)
><4>ACPI: MCFG CF6E8580, 003C (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
><4>ACPI: APIC CF6E8400, 0084 (r1 GBT    GBTUACPI 42302E31 GBTU  1010101)
><4>ACPI: SSDT CF6E8600, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20040311)
><4>ACPI: SSDT CF6E8A90, 0275 (r1  PmRef    CpuPm     3000 INTL 20040311)
><6>No NUMA configuration found
><6>Faking a node at 0000000000000000-0000000130000000
><7>Entering add_active_range(0, 0, 158) 0 entries of 3200 used
><7>Entering add_active_range(0, 256, 849632) 1 entries of 3200 used
><7>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
><6>Bootmem setup node 0 0000000000000000-0000000130000000
><4>Zone PFN ranges:
><4>  DMA             0 ->     4096
><4>  DMA32        4096 ->  1048576
><4>  Normal    1048576 ->  1245184
><4>early_node_map[3] active PFN ranges
><4>    0:        0 ->      158
><4>    0:      256 ->   849632
><4>    0:  1048576 ->  1245184
><7>On node 0 totalpages: 1046142
><7>  DMA zone: 88 pages used for memmap
><7>  DMA zone: 2368 pages reserved
><7>  DMA zone: 1542 pages, LIFO batch:0
><7>  DMA32 zone: 22440 pages used for memmap
><7>  DMA32 zone: 823096 pages, LIFO batch:31
><7>  Normal zone: 4224 pages used for memmap
><7>  Normal zone: 192384 pages, LIFO batch:31
><6>ACPI: PM-Timer IO Port: 0x408
><7>ACPI: Local APIC address 0xfee00000
><6>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
><6>Processor #0 (Bootup-CPU)
><6>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
><6>Processor #1
><6>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
><6>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
><6>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
><6>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
><6>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
><6>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
><6>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
><7>ACPI: IRQ0 used by override.
><7>ACPI: IRQ2 used by override.
><7>ACPI: IRQ9 used by override.
><6>Setting APIC routing to physical flat
><6>ACPI: HPET id: 0x8086a201 base: 0xfed00000
><6>Using ACPI (MADT) for SMP configuration information
><4>Nosave address range: 000000000009e000 - 00000000000a0000
><4>Nosave address range: 00000000000a0000 - 00000000000f0000
><4>Nosave address range: 00000000000f0000 - 0000000000100000
><4>Nosave address range: 00000000cf6e0000 - 00000000cf6e3000
><4>Nosave address range: 00000000cf6e3000 - 00000000cf6f0000
><4>Nosave address range: 00000000cf6f0000 - 00000000cf700000
><4>Nosave address range: 00000000cf700000 - 00000000d0000000
><4>Nosave address range: 00000000d0000000 - 00000000e0000000
><4>Nosave address range: 00000000e0000000 - 00000000fec00000
><4>Nosave address range: 00000000fec00000 - 0000000100000000
><6>Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000)
><6>SMP: Allowing 4 CPUs, 2 hotplug CPUs
><6>PERCPU: Allocating 44672 bytes of per cpu data
><4>Built 1 zonelists.  Total pages: 1017022
><5>Kernel command line: 
><4>Initializing CPU#0
><4>PID hash table entries: 4096 (order: 12, 32768 bytes)
><6>time.c: Detected 2399.999 MHz processor.
><4>Console: colour VGA+ 80x25
><4>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
><4>... MAX_LOCKDEP_SUBCLASSES:    8
><4>... MAX_LOCK_DEPTH:          30
><4>... MAX_LOCKDEP_KEYS:        2048
><4>... CLASSHASH_SIZE:           1024
><4>... MAX_LOCKDEP_ENTRIES:     8192
><4>... MAX_LOCKDEP_CHAINS:      16384
><4>... CHAINHASH_SIZE:          8192
><4> memory used by lock dependency info: 1648 kB
><4> per task-struct memory footprint: 1680 bytes
><4>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
><4>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
><4>Checking aperture...
><7>Calgary: detecting Calgary via BIOS EBDA area
><7>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
><6>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
><6>Placing software IO TLB between 0x6e9a000 - 0xae9a000
><4>Memory: 4006600k/4980736k available (2465k kernel code, 177968k reserved, 1445k data, 332k init)
><4>Calibrating delay using timer specific routine.. 4803.27 BogoMIPS (lpj=2401637)
><6>Security Framework v1.0.0 initialized
><6>SELinux:  Initializing.
><7>SELinux:  Starting in permissive mode
><6>selinux_register_security:  Registering secondary module capability
><6>Capability LSM initialized as secondary
><4>Mount-cache hash table entries: 256
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 0/0 -> Node 0
><4>using mwait in idle threads.
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 0
><6>CPU0: Thermal monitoring enabled (TM2)
><4>lockdep: not fixing up alternatives.
><6>ACPI: Core revision 20070126
><6>Using local APIC timer interrupts.
><4>result 16666644
><6>Detected 16.666 MHz APIC timer.
><4>lockdep: not fixing up alternatives.
><6>Booting processor 1/2 APIC 0x1
><4>Initializing CPU#1
><4>Calibrating delay using timer specific routine.. 4800.01 BogoMIPS (lpj=2400009)
><6>CPU: L1 I cache: 32K, L1 D cache: 32K
><6>CPU: L2 cache: 4096K
><6>CPU 1/1 -> Node 0
><6>CPU: Physical Processor ID: 0
><6>CPU: Processor Core ID: 1
><6>CPU1: Thermal monitoring enabled (TM2)
><4>Intel(R) Core(TM)2 CPU          6600  @ 2.40GHz stepping 06
><6>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
><6>Brought up 2 CPUs
><7>sizeof(vma)=176 bytes
><7>sizeof(page)=88 bytes
><7>sizeof(inode)=1008 bytes
><7>sizeof(dentry)=248 bytes
><7>sizeof(ext3inode)=1376 bytes
><7>sizeof(buffer_head)=104 bytes
><7>sizeof(skbuff)=248 bytes
><7>sizeof(task_struct)=3776 bytes
><4>migration_cost=17
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: Using configuration type 1
><4>mtrr: your CPUs had inconsistent variable MTRR settings
><6>mtrr: probably your BIOS does not setup all CPUs.
><6>mtrr: corrected configuration.
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using IOAPIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><7>Boot video device is 0000:00:02.0
><4>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
><4>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
><6>PCI: Transparent bridge - 0000:00:1e.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
><4>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 *14 15)
><4>ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 13 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>PCI-GART: No AMD northbridge found.
><6>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
><6>hpet0: 3 64-bit timers, 14318180 Hz
><6>pnp: 00:09: ioport range 0x400-0x4bf could not be reserved
><6>pnp: 00:0a: iomem range 0xd0000000-0xdfffffff could not be reserved
><6>pnp: 00:0b: iomem range 0xd1000-0xd3fff has been reserved
><6>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
><6>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
><6>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
><6>Time: tsc clocksource has been installed.
><4>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
><6>PCI: Bridge: 0000:00:1c.0
><6>  IO window: 7000-7fff
><6>  MEM window: disabled.
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.3
><6>  IO window: 8000-9fff
><6>  MEM window: f4100000-f41fffff
><6>  PREFETCH window: disabled.
><6>PCI: Bridge: 0000:00:1c.4
><6>  IO window: a000-afff
><6>  MEM window: f0000000-f1ffffff
><6>  PREFETCH window: f4300000-f43fffff
><6>PCI: Bridge: 0000:00:1e.0
><6>  IO window: b000-bfff
><6>  MEM window: f2000000-f3ffffff
><6>  PREFETCH window: f4400000-f44fffff
><6>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><6>ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><7>PCI: Setting latency timer of device 0000:00:1e.0 to 64
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
><4>TCP established hash table entries: 65536 (order: 10, 4194304 bytes)
><4>TCP bind hash table entries: 65536 (order: 9, 3670016 bytes)
><6>TCP: Hash tables configured (established 65536 bind 65536)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Freeing initrd memory: 5660k freed
><6>audit: initializing netlink socket (disabled)
><5>audit(1178221885.681:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key 86AF745E898D6960
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><7>PCI: Setting latency timer of device 0000:00:1c.0 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.0:pcie00]
><7>Allocate Port Service[0000:00:1c.0:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.3 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.3:pcie00]
><7>Allocate Port Service[0000:00:1c.3:pcie02]
><7>PCI: Setting latency timer of device 0000:00:1c.4 to 64
><4>assign_interrupt_mode Found MSI capability
><7>Allocate Port Service[0000:00:1c.4:pcie00]
><7>Allocate Port Service[0000:00:1c.4:pcie02]
><6>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
><6>ACPI: Processor [CPU0] (supports 2 throttling states)
><4>ACPI: SSDT CF6E8A00, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20040311)
><6>ACPI: Processor [CPU1] (supports 2 throttling states)
><4>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
><4>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>agpgart: Detected an Intel 965G Chipset.
><6>agpgart: Detected 7676K stolen memory.
><6>agpgart: AGP aperture is 256M @ 0xe0000000
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><6>Freeing unused kernel memory: 332k freed
><4>Write protecting the kernel read-only data: 1058k
><6>loop: loaded (max 8 devices)
><6>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 5 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><6>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1a.7 to 64
><6>ehci_hcd 0000:00:1a.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
><7>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
><6>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf4205000
><6>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 4 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.7 to 64
><6>ehci_hcd 0000:00:1d.7: EHCI Host Controller
><6>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
><7>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
><6>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf4204000
><6>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 6 ports detected
><6>usb 1-1: new high speed USB device using ehci_hcd and address 2
><6>USB Universal Host Controller Interface driver v3.0
><6>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:00:1a.0 to 64
><6>uhci_hcd 0000:00:1a.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
><6>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000c400
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
><7>PCI: Setting latency timer of device 0000:00:1a.1 to 64
><6>uhci_hcd 0000:00:1a.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
><6>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000d400
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
><7>PCI: Setting latency timer of device 0000:00:1d.0 to 64
><6>uhci_hcd 0000:00:1d.0: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
><6>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000c800
><6>usb usb5: configuration #1 chosen from 1 choice
><6>hub 5-0:1.0: USB hub found
><6>hub 5-0:1.0: 2 ports detected
><6>usb 1-1: configuration #1 chosen from 1 choice
><6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1d.1 to 64
><6>uhci_hcd 0000:00:1d.1: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
><6>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
><6>usb usb6: configuration #1 chosen from 1 choice
><6>hub 6-0:1.0: USB hub found
><6>hub 6-0:1.0: 2 ports detected
><6>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
><7>PCI: Setting latency timer of device 0000:00:1d.2 to 64
><6>uhci_hcd 0000:00:1d.2: UHCI Host Controller
><6>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
><6>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
><6>usb usb7: configuration #1 chosen from 1 choice
><6>hub 7-0:1.0: USB hub found
><6>hub 7-0:1.0: 2 ports detected
><6>usb 2-1: new high speed USB device using ehci_hcd and address 2
><6>usb 2-1: configuration #1 chosen from 1 choice
><6>hub 2-1:1.0: USB hub found
><6>hub 2-1:1.0: 4 ports detected
><6>usb 5-2: new low speed USB device using uhci_hcd and address 2
><6>usb 5-2: configuration #1 chosen from 1 choice
><6>input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /class/input/input4
><6>input: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.0-2
><6>usb 7-2: new low speed USB device using uhci_hcd and address 2
><6>usb 7-2: configuration #1 chosen from 1 choice
><6>hiddev96: USB HID v1.11 Device [Belkin  UPS] on usb-0000:00:1d.2-2
><6>usb 2-1.3: new high speed USB device using ehci_hcd and address 5
><6>usb 2-1.3: configuration #1 chosen from 1 choice
><6>Initializing USB Mass Storage driver...
><6>scsi0 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 2
><7>usb-storage: waiting for device to settle before scanning
><6>scsi1 : SCSI emulation for USB Mass Storage devices
><7>usb-storage: device found at 5
><7>usb-storage: waiting for device to settle before scanning
><6>usbcore: registered new interface driver usb-storage
><6>USB Mass Storage support registered.
><7>usb-storage: device scan complete
><7>usb-storage: device scan complete
><5>scsi 1:0:0:0: Direct-Access     Generic  USB SD Reader    1.00 PQ: 0 ANSI: 0
><5>scsi 1:0:0:1: Direct-Access     Generic  USB CF Reader    1.01 PQ: 0 ANSI: 0
><5>scsi 1:0:0:2: Direct-Access     Generic  USB SM Reader    1.02 PQ: 0 ANSI: 0
><5>scsi 1:0:0:3: Direct-Access     Generic  USB MS Reader    1.03 PQ: 0 ANSI: 0
><5>scsi 0:0:0:0: Direct-Access     SAMSUNG  HD400LD          WQ10 PQ: 0 ANSI: 0
><5>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><5>SCSI device sda: 781422768 512-byte hdwr sectors (400088 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 03 00 00 00
><3>sda: assuming drive cache: write through
><6> sda:<6>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
><6>ACPI: PCI Interrupt 0000:04:02.0[A] -> GSI 18 (level, low) -> IRQ 18
><6>eth0: RTL8169s/8110s at 0xffffc2000003a000, 00:17:3f:0b:0e:12, IRQ 18
><7>libata version 2.20 loaded.
><6>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 16 (level, low) -> IRQ 16
><7>PCI: Setting latency timer of device 0000:02:00.1 to 64
><6>ata1: PATA max UDMA/100 cmd 0x0000000000018000 ctl 0x0000000000018402 bmdma 0x0000000000019000 irq 16
><6>ata2: PATA max UDMA/100 cmd 0x0000000000018800 ctl 0x0000000000018c02 bmdma 0x0000000000019008 irq 16
><6>scsi2 : pata_jmicron
><6>ata1.01: ATAPI, max UDMA/33
><6>ata1.01: configured for UDMA/33
><6>scsi3 : pata_jmicron
><4>ATA: abnormal status 0x7F on port 0x0000000000018807
><6>scsi: waiting for bus probes to complete ...
><4> sda1
><5>sd 0:0:0:0: Attached scsi disk sda
><5>sd 1:0:0:0: Attached scsi removable disk sdb
><5>sd 1:0:0:1: Attached scsi removable disk sdc
><5>sd 1:0:0:2: Attached scsi removable disk sdd
><5>sd 1:0:0:3: Attached scsi removable disk sde
><5>scsi 2:0:1:0: CD-ROM            _NEC     DVD_RW ND-4570A  1.02 PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 2:0:1:0: Attached scsi CD-ROM sr0
><7>ahci 0000:00:1f.2: version 2.1
><6>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:00:1f.2 to 64
><6>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
><6>ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part 
><6>ata3: SATA max UDMA/133 cmd 0xffffc2000003c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>ata4: SATA max UDMA/133 cmd 0xffffc2000003c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>ata5: DUMMY
><6>ata6: DUMMY
><6>ata7: SATA max UDMA/133 cmd 0xffffc2000003c300 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>ata8: SATA max UDMA/133 cmd 0xffffc2000003c380 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>scsi4 : ahci
><6>ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata3.00: ata_hpa_resize 1: sectors = 390719855, hpa_sectors = 390721968
><6>ata3.00: Host Protected Area detected:
><4>	current size: 390719855 sectors
><4>	native size: 390721968 sectors
><6>ata3.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
><6>ata3.00: 390719855 sectors, multi 0: LBA48 
><6>ata3.00: ata_hpa_resize 1: sectors = 390719855, hpa_sectors = 390721968
><6>ata3.00: Host Protected Area detected:
><4>	current size: 390719855 sectors
><4>	native size: 390721968 sectors
><6>ata3.00: configured for UDMA/133
><6>scsi5 : ahci
><6>ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata4.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata4.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
><6>ata4.00: 390721968 sectors, multi 0: LBA48 
><6>ata4.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata4.00: configured for UDMA/133
><6>scsi6 : ahci
><6>scsi7 : ahci
><6>scsi8 : ahci
><6>ata7: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata7.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata7.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
><6>ata7.00: 390721968 sectors, multi 0: LBA48 
><6>ata7.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata7.00: configured for UDMA/133
><6>scsi9 : ahci
><6>ata8: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
><6>ata8.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata8.00: ATA-6: ST3200822AS, 3.01, max UDMA/133
><6>ata8.00: 390721968 sectors, multi 0: LBA48 
><6>ata8.00: ata_hpa_resize 1: sectors = 390721968, hpa_sectors = 390721968
><6>ata8.00: configured for UDMA/133
><5>scsi 4:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
><5>SCSI device sdf: 390719855 512-byte hdwr sectors (200049 MB)
><5>sdf: Write Protect is off
><7>sdf: Mode Sense: 00 3a 00 00
><5>SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sdf: 390719855 512-byte hdwr sectors (200049 MB)
><5>sdf: Write Protect is off
><7>sdf: Mode Sense: 00 3a 00 00
><5>SCSI device sdf: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdf: sdf1 sdf2
><5>sd 4:0:0:0: Attached scsi disk sdf
><5>scsi 5:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
><5>SCSI device sdg: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdg: Write Protect is off
><7>sdg: Mode Sense: 00 3a 00 00
><5>SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sdg: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdg: Write Protect is off
><7>sdg: Mode Sense: 00 3a 00 00
><5>SCSI device sdg: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdg: sdg1 sdg2
><5>sd 5:0:0:0: Attached scsi disk sdg
><5>scsi 8:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
><5>SCSI device sdh: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdh: Write Protect is off
><7>sdh: Mode Sense: 00 3a 00 00
><5>SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sdh: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdh: Write Protect is off
><7>sdh: Mode Sense: 00 3a 00 00
><5>SCSI device sdh: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdh: sdh1 sdh2
><5>sd 8:0:0:0: Attached scsi disk sdh
><5>scsi 9:0:0:0: Direct-Access     ATA      ST3200822AS      3.01 PQ: 0 ANSI: 5
><5>SCSI device sdi: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdi: Write Protect is off
><7>sdi: Mode Sense: 00 3a 00 00
><5>SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sdi: 390721968 512-byte hdwr sectors (200050 MB)
><5>sdi: Write Protect is off
><7>sdi: Mode Sense: 00 3a 00 00
><5>SCSI device sdi: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sdi: sdi1 sdi2
><5>sd 9:0:0:0: Attached scsi disk sdi
><6>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 19 (level, low) -> IRQ 19
><7>PCI: Setting latency timer of device 0000:02:00.0 to 64
><6>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
><6>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
><6>ata9: SATA max UDMA/133 cmd 0xffffc20000040100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>ata10: SATA max UDMA/133 cmd 0xffffc20000040180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 19
><6>scsi10 : ahci
><6>ata9: SATA link down (SStatus 0 SControl 300)
><6>scsi11 : ahci
><6>ata10: SATA link down (SStatus 0 SControl 300)
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop1.
><7>security:  3 users, 6 roles, 1801 types, 76 bools, 1 sens, 1024 cats
><7>security:  60 classes, 65047 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop1, type squashfs), not configured for labeling
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1178221941.069:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: automatically using best checksumming function: generic_sse
><4>   generic_sse:  8772.000 MB/sec
><4>raid5: using function: generic_sse (8772.000 MB/sec)
><4>raid6: int64x1   2046 MB/s
><4>raid6: int64x2   2726 MB/s
><4>raid6: int64x4   1945 MB/s
><4>raid6: int64x8   1804 MB/s
><4>raid6: sse2x1    4171 MB/s
><4>raid6: sse2x2    4941 MB/s
><4>raid6: sse2x4    7296 MB/s
><4>raid6: using algorithm sse2x4 (7296 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><4>GFS2 (built Apr 21 2007 22:04:48) installed
><6>Lock_Nolock (built Apr 21 2007 22:04:56) installed
><6>JFS: nTxBlock = 8192, nTxLock = 65536
><6>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><5>audit(1178221943.466:3): audit_pid=889 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda1, type ext3), uses xattr
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop2, type iso9660), uses genfs_contexts
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev sda1, type ext3), uses xattr
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><7>SELinux: initialized (dev loop3, type iso9660), uses genfs_contexts
><6>usb 7-2: USB disconnect, address 2
><6>usb 7-2: new low speed USB device using uhci_hcd and address 3
><6>usb 7-2: configuration #1 chosen from 1 choice
><6>hiddev96: USB HID v1.11 Device [Belkin  UPS] on usb-0000:00:1d.2-2
><6>usb 2-1.3: reset high speed USB device using ehci_hcd and address 5
><4>md: anaconda(pid 886) used deprecated START_ARRAY ioctl. This will not be supported beyond July 2006
><3>md: could not open unknown-block(8,33).
><3>md: could not open unknown-block(8,49).
><3>md: could not bd_claim sda1.
><3>md: could not open unknown-block(8,17).
><6>md: autorun ...
><6>md: considering sdf1 ...
><6>md:  adding sdf1 ...
><6>md: created md0
><6>md: bind<sdf1>
><6>md: running: <sdf1>
><6>raid1: raid set md0 active with 1 out of 4 mirrors
><6>md: ... autorun DONE.
><4>md: anaconda(pid 886) used deprecated START_ARRAY ioctl. This will not be supported beyond July 2006
><3>md: could not open unknown-block(8,34).
><3>md: could not open unknown-block(8,50).
><3>md: could not open unknown-block(8,2).
><3>md: could not open unknown-block(8,18).
><6>md: autorun ...
><6>md: considering sdf2 ...
><6>md:  adding sdf2 ...
><6>md: created md1
><6>md: bind<sdf2>
><6>md: running: <sdf2>
><6>raid5: device sdf2 operational as raid disk 2
><3>raid5: not enough operational devices for md1 (3/4 failed)
><4>RAID5 conf printout:
><4> --- rd:4 wd:1
><4> disk 2, o:1, dev:sdf2
><1>raid5: failed to run raid set md1
><3>md: pers->run() failed ...
><4>md: do_md_run() returned -5
><6>md: md1 stopped.
><6>md: unbind<sdf2>
><6>md: export_rdev(sdf2)
><6>md: ... autorun DONE.
><6>kjournald starting.  Commit interval 5 seconds
><6>EXT3-fs: mounted filesystem with ordered data mode.
><7>SELinux: initialized (dev md0, type ext3), uses xattr
><6>md: md0 stopped.
><6>md: unbind<sdf1>
><6>md: export_rdev(sdf1)
><6>md: md1 stopped.
><4>md: anaconda(pid 886) used deprecated START_ARRAY ioctl. This will not be supported beyond July 2006
><3>md: could not open unknown-block(8,33).
><3>md: could not open unknown-block(8,49).
><3>md: could not bd_claim sda1.
><3>md: could not open unknown-block(8,17).
><6>md: autorun ...
><6>md: considering sdf1 ...
><6>md:  adding sdf1 ...
><6>md: created md0
><6>md: bind<sdf1>
><6>md: running: <sdf1>
><6>raid1: raid set md0 active with 1 out of 4 mirrors
><6>md: ... autorun DONE.
><3>md: could not open unknown-block(8,34).
><3>md: could not open unknown-block(8,50).
><3>md: could not open unknown-block(8,2).
><3>md: could not open unknown-block(8,18).
><6>md: autorun ...
><6>md: considering sdf2 ...
><6>md:  adding sdf2 ...
><6>md: created md1
><6>md: bind<sdf2>
><6>md: running: <sdf2>
><6>raid5: device sdf2 operational as raid disk 2
><3>raid5: not enough operational devices for md1 (3/4 failed)
><4>RAID5 conf printout:
><4> --- rd:4 wd:1
><4> disk 2, o:1, dev:sdf2
><1>raid5: failed to run raid set md1
><3>md: pers->run() failed ...
><4>md: do_md_run() returned -5
><6>md: md1 stopped.
><6>md: unbind<sdf2>
><6>md: export_rdev(sdf2)
><6>md: ... autorun DONE.
><6>md: md0 stopped.
><6>md: unbind<sdf1>
><6>md: export_rdev(sdf1)
><6>md: md1 stopped.
><6>r8169: eth0: link up
><6>r8169: eth0: link up
><6>pump[1020]: segfault at 0000000000000000 rip 00002aaaad28a909 rsp 00007fff21548870 error 4
><7>eth0: no IPv6 routers present
><6>usb 2-1.3: reset high speed USB device using ehci_hcd and address 5
><6>r8169: eth0: link up
><6>pump[1026]: segfault at 0000000000000000 rip 00002aaaad28a909 rsp 00007fff22d11030 error 4
><7>eth0: no IPv6 routers present

Actions: View

Attachments on bug 238926: 154076 | 154078