Attachment 154299 Details for Bug 239120 – smartctl -a /dev/sdb

smartctl -a /dev/sdb

sdb-a.txt (text/plain), 4.51 KB, created by Tom Horsley on 2007-05-07 21:20:01 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Tom Horsley

Created: 2007-05-07 21:20:01 UTC

Size: 4.51 KB

patch

obsolete

>smartctl version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen
>Home page is http://smartmontools.sourceforge.net/
>
>=== START OF INFORMATION SECTION ===
>Model Family:     SAMSUNG SpinPoint P80 SD series
>Device Model:     SAMSUNG HD160JJ
>Serial Number:    S08HJ1OA105571
>Firmware Version: ZM100-33
>User Capacity:    160,041,885,696 bytes
>Device is:        In smartctl database [for details use: -P show]
>ATA Version is:   7
>ATA Standard is:  ATA/ATAPI-7 T13 1532D revision 4a
>Local Time is:    Mon May  7 16:54:55 2007 EDT
>SMART support is: Available - device has SMART capability.
>SMART support is: Enabled
>
>=== START OF READ SMART DATA SECTION ===
>SMART overall-health self-assessment test result: PASSED
>
>General SMART Values:
>Offline data collection status:  (0x82)	Offline data collection activity
>					was completed without error.
>					Auto Offline Data Collection: Enabled.
>Self-test execution status:      (   0)	The previous self-test routine completed
>					without error or no self-test has ever 
>					been run.
>Total time to complete Offline 
>data collection: 		 (3680) seconds.
>Offline data collection
>capabilities: 			 (0x5b) SMART execute Offline immediate.
>					Auto Offline data collection on/off support.
>					Suspend Offline collection upon new
>					command.
>					Offline surface scan supported.
>					Self-test supported.
>					No Conveyance Self-test supported.
>					Selective Self-test supported.
>SMART capabilities:            (0x0003)	Saves SMART data before entering
>					power-saving mode.
>					Supports SMART auto save timer.
>Error logging capability:        (0x01)	Error logging supported.
>					General Purpose Logging supported.
>Short self-test routine 
>recommended polling time: 	 (   1) minutes.
>Extended self-test routine
>recommended polling time: 	 (  61) minutes.
>
>SMART Attributes Data Structure revision number: 16
>Vendor Specific SMART Attributes with Thresholds:
>ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
>  1 Raw_Read_Error_Rate     0x000f   100   100   051    Pre-fail  Always       -       0
>  3 Spin_Up_Time            0x0007   100   100   025    Pre-fail  Always       -       5952
>  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       140
>  5 Reallocated_Sector_Ct   0x0033   253   253   010    Pre-fail  Always       -       0
>  7 Seek_Error_Rate         0x000f   253   253   051    Pre-fail  Always       -       0
>  8 Seek_Time_Performance   0x0025   253   253   015    Pre-fail  Offline      -       0
>  9 Power_On_Hours          0x0032   100   100   000    Old_age   Always       -       10183
> 10 Spin_Retry_Count        0x0033   253   253   051    Pre-fail  Always       -       0
> 11 Calibration_Retry_Count 0x0012   253   002   000    Old_age   Always       -       0
> 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       140
>190 Temperature_Celsius     0x0022   112   070   000    Old_age   Always       -       42
>194 Temperature_Celsius     0x0022   112   070   000    Old_age   Always       -       42
>195 Hardware_ECC_Recovered  0x001a   100   100   000    Old_age   Always       -       1481844
>196 Reallocated_Event_Count 0x0032   253   253   000    Old_age   Always       -       0
>197 Current_Pending_Sector  0x0012   253   253   000    Old_age   Always       -       0
>198 Offline_Uncorrectable   0x0030   253   253   000    Old_age   Offline      -       0
>199 UDMA_CRC_Error_Count    0x003e   200   200   000    Old_age   Always       -       0
>200 Multi_Zone_Error_Rate   0x000a   100   100   000    Old_age   Always       -       0
>201 Soft_Read_Error_Rate    0x000a   253   100   000    Old_age   Always       -       0
>202 TA_Increase_Count       0x0032   100   100   000    Old_age   Always       -       1
>
>SMART Error Log Version: 1
>No Errors Logged
>
>SMART Self-test log structure revision number 1
>No self-tests have been logged.  [To run self-tests, use: smartctl -t]
>
>
>SMART Selective Self-Test Log Data Structure Revision Number (0) should be 1
>SMART Selective self-test log data structure revision number 0
>Warning: ATA Specification requires selective self-test log data structure revision number = 1
> SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
>    1        0        0  Not_testing
>    2        0        0  Not_testing
>    3        0        0  Not_testing
>    4        0        0  Not_testing
>    5        0        0  Not_testing
>Selective self-test flags (0x0):
>  After scanning selected spans, do NOT read-scan remainder of disk.
>If Selective self-test is pending on power-up, resume after 0 minute delay.
>

Actions: View

Attachments on bug 239120: 154247 | 154248 | 154249 | 154298 | 154299 | 154300