Attachment 154332 Details for Bug 239422 – dmesg output with GPF

dmesg output with GPF

dmesg.txt (text/plain), 18.83 KB, created by Okke Timm on 2007-05-08 11:37:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Okke Timm

Created: 2007-05-08 11:37:13 UTC

Size: 18.83 KB

patch

obsolete

>Linux version 2.6.20-2925.5.fc7xen (brewbuilder@hs20-bc1-5.build.redhat.com) (gcc version 4.1.2 20070317 (Red Hat 4.1.2-5)) #1 SMP Thu Mar 22 13:51:40 EDT 2007
>Command line: ro root=LABEL=/
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 0000000076264000 (usable)
>Entering add_active_range(0, 0, 483940) 0 entries of 256 used
>end_pfn_map = 483940
>Entering add_active_range(0, 0, 483940) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   483940
>  DMA32      483940 ->   483940
>  Normal     483940 ->   483940
>early_node_map[1] active PFN ranges
>    0:        0 ->   483940
>On node 0 totalpages: 483940
>  DMA zone: 6616 pages used for memmap
>  DMA zone: 1099 pages reserved
>  DMA zone: 476225 pages, LIFO batch:31
>  DMA32 zone: 0 pages used for memmap
>  Normal zone: 0 pages used for memmap
>DMI 2.3 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x00000000000f6500
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff3040
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff30c0
>ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff6640
>ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x000000007fff6580
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>PERCPU: Allocating 26368 bytes of per cpu data
>Built 1 zonelists.  Total pages: 476225
>Kernel command line: ro root=LABEL=/
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2992.638 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: 0xffff88000362e000 - 0xffff88000382e000
> Address size: 30 bits
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 1874936k/1935760k available (2206k kernel code, 51948k reserved, 1347k data, 192k init)
>Calibrating delay using timer specific routine.. 7484.27 BogoMIPS (lpj=14968555)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Brought up 1 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=768 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=1040 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1936 bytes
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at f0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:03:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:08: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 9000-9fff
>  MEM window: e0000000-e3ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: e4000000-e40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-afff
>  MEM window: e4100000-e41fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 7923k freed
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1178630439.604:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Processor [CPU1] (supports 2 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Write protecting the kernel read-only data: 938k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000bc00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xe4204000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xF000 irq 14
>ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xF008 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/133, 488397168 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>usb 5-3: new high speed USB device using ehci_hcd and address 2
>ata2.01: ATAPI, max UDMA/33
>usb 5-3: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ata2.00: configured for UDMA/33
>ata2.01: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST3250824AS      3.AA PQ: 0 ANSI: 5
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 488397168 512-byte hdwr sectors (250059 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6<6>usb 5-4: new high speed USB device using ehci_hcd and address 3
> sda7 sda8 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            PHILIPS  DROM6216         DD08 PQ: 0 ANSI: 5
>scsi 1:0:1:0: CD-ROM            _NEC     DVD_RW ND-4550A  1.09 PQ: 0 ANSI: 5
>usb 5-4: configuration #1 chosen from 1 choice
>usb 3-1: new low speed USB device using uhci_hcd and address 2
>usb 3-1: configuration #1 chosen from 1 choice
>input: Logitech USB Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:1d.2-1
>usb 3-2: new low speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice
>input: HID 1267:0103 as /class/input/input2
>input: USB HID v1.10 Keyboard [HID 1267:0103] on usb-0000:00:1d.2-2
>input: HID 1267:0103 as /class/input/input3
>input: USB HID v1.10 Device [HID 1267:0103] on usb-0000:00:1d.2-2
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1178630447.676:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>scsi 1:0:1:0: Attached scsi generic sg2 type 5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sr0: scsi3-mmc drive: 0x/48x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>sr1: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
>sr 1:0:1:0: Attached scsi CD-ROM sr1
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input4
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:03:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>e100: eth0: e100_probe: addr 0xe4105000, irq 20, MAC addr 00:14:85:FF:7C:5F
>general protection fault: 0000 [1] SMP 
>last sysfs file: /kernel/uevent_seqnum
>CPU 0 
>Modules linked in: kvm_intel kvm e100 serial_core mii snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm serio_raw pcspkr sr_mod iTCO_wdt iTCO_vendor_support cdrom i2c_i801 i2c_core snd_timer shpchp sg joydev snd soundcore snd_page_alloc ata_generic ata_piix libata sd_mod scsi_mod ext3 jbd mbcache ehci_hcd ohci_hcd uhci_hcd
>Pid: 1072, comm: modprobe Not tainted 2.6.20-2925.5.fc7xen #1
>RIP: e030:[<ffffffff8813b15d>]  [<ffffffff8813b15d>] :kvm_intel:hardware_enable+0x7c/0x83
>RSP: e02b:ffff880074e33e00  EFLAGS: 00010002
>RAX: ffff880074e33e08 RBX: 0000000000000000 RCX: 000000000000003a
>RDX: 0000000000000005 RSI: 000000000394f000 RDI: 0000000000000000
>RBP: ffffffff88206f00 R08: 0000000000000000 R09: 0000000000070eb1
>R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
>R13: ffffffff8813b0e1 R14: ffffc20000032ee8 R15: ffffffff88206f50
>FS:  00002aaaaaabc260(0000) GS:ffffffff80579000(0000) knlGS:0000000000000000
>CS:  e033 DS: 0000 ES: 0000 CR0: 000000008005003b
>CR2: 0000000000000000 CR3: 00000000001de000 CR4: 0000000000002660
>Process modprobe (pid: 1072, threadinfo ffff880074e32000, task ffff880000d657d0)
>Stack:  ffffffff8813b0e1 000000000394f000 ffffffff80287246 0000000000000000
> ffffffff88206f00 ffff88007504ad40 ffffffff881f31b2 ffff88007504a800
> ffffffff88206f00 ffff88007504a800 ffffffff8029d2f6 ffff880000d657d0
>Call Trace:
> [<ffffffff8813b0e1>] :kvm_intel:hardware_enable+0x0/0x83
> [<ffffffff80287246>] on_each_cpu+0x1d/0x2a
> [<ffffffff881f31b2>] :kvm:kvm_init_arch+0x83/0xeb
> [<ffffffff8029d2f6>] sys_init_module+0x1785/0x18f2
> [<ffffffff8025b106>] system_call+0x86/0x8b
> [<ffffffff8025b080>] system_call+0x0/0x8b
>
>
>Code: f3 0f c7 30 5e 5f c3 fe 02 ae 48 c0 0f 85 de 0f 00 00 e9 f3 
>RIP  [<ffffffff8813b15d>] :kvm_intel:hardware_enable+0x7c/0x83
> RSP <ffff880074e33e00>
> <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
>
>Call Trace:
> [<ffffffff80295804>] down_read+0x15/0x23
> [<ffffffff8029e75f>] acct_collect+0x42/0x18e
> [<ffffffff80215467>] do_exit+0x200/0x809
> [<ffffffff802684c6>] kernel_math_error+0x0/0x90
> [<ffffffff8813b0e1>] :kvm_intel:hardware_enable+0x0/0x83
> [<ffffffff80260a9d>] do_general_protection+0x102/0x10b
> [<ffffffff80260447>] error_exit+0x0/0x6e
> [<ffffffff8813b0e1>] :kvm_intel:hardware_enable+0x0/0x83
> [<ffffffff8813b15d>] :kvm_intel:hardware_enable+0x7c/0x83
> [<ffffffff8813b0e1>] :kvm_intel:hardware_enable+0x0/0x83
> [<ffffffff80287246>] on_each_cpu+0x1d/0x2a
> [<ffffffff881f31b2>] :kvm:kvm_init_arch+0x83/0xeb
> [<ffffffff8029d2f6>] sys_init_module+0x1785/0x18f2
> [<ffffffff8025b106>] system_call+0x86/0x8b
> [<ffffffff8025b080>] system_call+0x0/0x8b
>
>loop: loaded (max 8 devices)
>FDC 0 is a post-1991 82077
>lp: driver loaded but no devices found
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda6, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda7, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>Adding 2345448k swap on /dev/sda8.  Priority:-1 extents:1 across:2345448k
>audit(1178623262.649:3): audit_pid=1512 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bridge firewalling registered
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>device vif0.0 entered promiscuous mode
>xenbr0: port 1(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex
>device peth0 entered promiscuous mode
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16

Actions: View

Attachments on bug 239422: 154332 | 154333