Attachment 154498 Details for Bug 234009 – dmesg output showing messages from boot until lockup on insertion of usb key

dmesg output showing messages from boot until lockup on insertion of usb key

usb_stick_lockup.dmesg (text/plain), 61.09 KB, created by Jonathan Underwood on 2007-05-10 21:10:45 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jonathan Underwood

Created: 2007-05-10 21:10:45 UTC

Size: 61.09 KB

patch

obsolete

>Linux version 2.6.20-1.2948.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 19:18:54 EDT 2007
>Command line: ro root=LABEL=/1 quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f693400 (usable)
> BIOS-e820: 000000007f693400 - 0000000080000000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4007000 (reserved)
> BIOS-e820: 00000000f4008000 - 00000000f400c000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521875) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP (v000 DELL                                  ) @ 0x00000000000fc1d0
>ACPI: RSDT (v001 DELL    M07     0x27d70402 ASL  0x00000061) @ 0x000000007f6939cd
>ACPI: FADT (v001 DELL    M07     0x27d70402 ASL  0x00000061) @ 0x000000007f694800
>ACPI: HPET (v001 DELL    M07     0x00000001 ASL  0x00000061) @ 0x000000007f694f00
>ACPI: MADT (v001 DELL    M07     0x27d70402 ASL  0x00000047) @ 0x000000007f695000
>ACPI: MCFG (v016 DELL    M07     0x27d70402 ASL  0x00000061) @ 0x000000007f694fc0
>ACPI: SLIC (v001 DELL    M07     0x27d70402 ASL  0x00000061) @ 0x000000007f69509c
>ACPI: BOOT (v001 DELL    M07     0x27d70402 ASL  0x00000061) @ 0x000000007f694bc0
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x000000007f693a0d
>ACPI: DSDT (v001 INT430 SYSFexxx 0x00001001 INTL 0x20050624) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007f693000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 521875) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007f693000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   521875
>On node 0 totalpages: 521778
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1321 pages reserved
>  DMA zone: 2614 pages, LIFO batch:0
>  DMA32 zone: 8090 pages used for memmap
>  DMA32 zone: 509689 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:70000000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 512303
>Kernel command line: ro root=LABEL=/1 quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2044152k/2087500k available (2454k kernel code, 42960k reserved, 1458k data, 316k init)
>Calibrating delay using timer specific routine.. 3995.11 BogoMIPS (lpj=1997556)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 10390646
>Detected 10.390 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.04 BogoMIPS (lpj=1995020)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 1320 cycles)
>Brought up 2 CPUs
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET timer.
>time.c: Detected 1995.003 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=34
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1080-10bf claimed by ICH6 GPIO
>0000:00:1f.2: trying to change BAR0 from 01F0 to 01F0
>0000:00:1f.2: trying to change BAR1 from 03F4 to 03F4
>0000:00:1f.2: trying to change BAR2 from 0170 to 0170
>0000:00:1f.2: trying to change BAR3 from 0374 to 0374
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *4
>ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 9 10 11) *3
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:02: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:02: ioport range 0x1000-0x1005 could not be reserved
>pnp: 00:02: ioport range 0x1008-0x100f could not be reserved
>pnp: 00:03: ioport range 0xf400-0xf4fe has been reserved
>pnp: 00:03: ioport range 0x1006-0x1007 has been reserved
>pnp: 00:03: ioport range 0x100a-0x1059 could not be reserved
>pnp: 00:03: ioport range 0x1060-0x107f has been reserved
>pnp: 00:03: ioport range 0x1080-0x10bf has been reserved
>pnp: 00:03: ioport range 0x10c0-0x10df has been reserved
>pnp: 00:08: ioport range 0xc80-0xcff could not be reserved
>pnp: 00:08: ioport range 0x910-0x91f has been reserved
>pnp: 00:08: ioport range 0x920-0x92f has been reserved
>pnp: 00:08: ioport range 0xcb0-0xcbf has been reserved
>pnp: 00:08: ioport range 0x930-0x97f has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: efd00000-efdfffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: d000-dfff
>  MEM window: efa00000-efcfffff
>  PREFETCH window: e0000000-e01fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: disabled.
>  MEM window: ef900000-ef9fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1527k freed
>Simple Boot Flag at 0x79 set to 0x80
>audit: initializing netlink socket (disabled)
>audit(1178791376.830:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 214E108B717C14AC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THM] (33 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>Probing IDE interface ide1...
>hdc: TSSTcorp DVD+/-RW TS-L632D, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
> Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1042k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bf80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000bf60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 22, io base 0x0000bf40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 23, io base 0x0000bf20
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.3, id: 0x81a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffa80000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>ata: 0x170 IDE port busy
>ata: conflict with ide1
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x1F0 ctl 0x3F6 bmdma 0xBFA0 irq 14
>ata2: DUMMY
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/100, 156301488 sectors: LBA48 NCQ (depth 0/32)
>ata1.00: ata1: dev 0 multi count 8
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>scsi 0:0:0:0: Direct-Access     ATA      Hitachi HTS72108 MC4O PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1178791379.879:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1630 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51372 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1178791380.137:3): policy loaded auid=4294967295
>iTCO_vendor_support: vendor-support=0
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>b44.c:v1.01 (Jun 16, 2006)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>eth0: Broadcom 4400 10/100BaseT Ethernet 00:18:8b:b4:f4:01
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 19)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>mmc0: SDHCI at 0xef9fd400 irq 18 DMA
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ieee1394: Initialized config rom entry `ip1394'
>Floppy drive(s): fd0 is 1.44M
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>hda_intel: azx_get_response timeout, switching to polling mode...
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>ACPI: AC Adapter [AC] (off-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SBTN]
>No dock devices found.
>ibm_acpi: ec object not found
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [VID2] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda4, type ext3), uses xattr
>Adding 4096564k swap on /dev/sda3.  Priority:-1 extents:1 across:4096564k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>[drm] Initialized drm 1.1.0 20060810
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>ieee80211_crypt: unregistered algorithm 'NULL'
>NET: Unregistered protocol family 31
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>Disabling non-boot CPUs ...
>Breaking affinity for irq 1
>Breaking affinity for irq 12
>Breaking affinity for irq 14
>Breaking affinity for irq 15
>Breaking affinity for irq 17
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks ... done.
>Suspending console(s)
>ACPI: PCI interrupt for device 0000:03:01.1 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Back to C!
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x95 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e015 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was ffa7c004, writing efebc004)
>PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 20100)
>PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing 200000f0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing b0b00)
>PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 20200)
>PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing efd0efd0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 0, writing f0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 6 (was 0, writing c0c00)
>PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100107)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 400, writing 20400)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e011e001)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing efc0efa0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 0, writing d0d0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing e0d00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
>PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 307)
>PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 405)
>PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 100f1, writing 1fff1)
>PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 90, writing ef90ef90)
>PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 228000f0)
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107)
>PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 204)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 204)
>PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:0c:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:0c:00.0 at offset 4 (was 0, writing efdff000)
>PM: Writing back config space on device 0000:0c:00.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100000, writing 100102)
>PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing ef9fe000)
>PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
>PM: Writing back config space on device 0000:03:01.0 at offset f (was 4020100, writing 4020103)
>PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing ef9fd800)
>PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:03:01.1 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing ef9fd400)
>PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>PM: Writing back config space on device 0000:03:01.2 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing ef9fd500)
>PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
>PM: Writing back config space on device 0000:03:01.3 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.3 at offset 4 (was 0, writing ef9fd600)
>PM: Writing back config space on device 0000:03:01.3 at offset 1 (was 2100000, writing 2100102)
>PM: Writing back config space on device 0000:03:01.4 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing ef9fd700)
>PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100000, writing 2100102)
>pnp: Device 00:04 does not support activation.
>pnp: Device 00:05 does not support activation.
>Restarting tasks ... done.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995012)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles)
>speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
> Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
>CPU1 is up
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [SBTN]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ata1: EH pending after completion, repeating EH (cnt=4)
>ata1: soft resetting port
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ata1.00: configured for UDMA/100
>ata1: EH complete
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ipw3945: Error sending cmd #08 to daemon: time out after 500ms.
>ipw3945: 1 frames still in use.  Did we lose one?
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>ieee80211_crypt: unregistered algorithm 'NULL'
>NET: Unregistered protocol family 31
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks ... done.
>Suspending console(s)
>ACPI: PCI interrupt for device 0000:03:01.1 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Back to C!
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x95 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e015 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was ffa7c004, writing efebc004)
>PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 20100)
>PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing f0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing b0b00)
>PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 20200)
>PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing efd0efd0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 0, writing f0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 6 (was 0, writing c0c00)
>PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100107)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 400, writing 20400)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e011e001)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing efc0efa0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 0, writing d0d0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing e0d00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
>PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 307)
>PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 405)
>PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 100f1, writing 1fff1)
>PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 90, writing ef90ef90)
>PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 228000f0)
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107)
>PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 204)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 204)
>PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:0c:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:0c:00.0 at offset 4 (was 0, writing efdff000)
>PM: Writing back config space on device 0000:0c:00.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100000, writing 100102)
>PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing ef9fe000)
>PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
>PM: Writing back config space on device 0000:03:01.0 at offset f (was 4020100, writing 4020103)
>PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing ef9fd800)
>PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:03:01.1 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing ef9fd400)
>PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>PM: Writing back config space on device 0000:03:01.2 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing ef9fd500)
>PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
>PM: Writing back config space on device 0000:03:01.3 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.3 at offset 4 (was 0, writing ef9fd600)
>PM: Writing back config space on device 0000:03:01.3 at offset 1 (was 2100000, writing 2100102)
>PM: Writing back config space on device 0000:03:01.4 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing ef9fd700)
>PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100000, writing 2100102)
>pnp: Device 00:04 does not support activation.
>pnp: Device 00:05 does not support activation.
>Restarting tasks ... done.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.01 BogoMIPS (lpj=1995007)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles)
>speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
> Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
>CPU1 is up
>input: Lid Switch as /class/input/input10
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input11
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input12
>ACPI: Sleep Button (CM) [SBTN]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ata1: EH pending after completion, repeating EH (cnt=4)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1: EH complete
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>ipw3945: Error sending cmd #08 to daemon: time out after 500ms.
>Losing some ticks... checking if CPU frequency changed.
>ipw3945: 1 frames still in use.  Did we lose one?
>ACPI: PCI interrupt for device 0000:0c:00.0 disabled
>ieee80211_crypt: unregistered algorithm 'NULL'
>NET: Unregistered protocol family 31
>ieee1394: Node removed: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>Disabling non-boot CPUs ...
>CPU 1 is now offline
>SMP alternatives: switching to UP code
>CPU1 is down
>Stopping tasks ... done.
>Suspending console(s)
>ACPI: PCI interrupt for device 0000:03:01.1 disabled
>ACPI: PCI interrupt for device 0000:00:1f.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.7 disabled
>ACPI: PCI interrupt for device 0000:00:1d.3 disabled
>ACPI: PCI interrupt for device 0000:00:1d.2 disabled
>ACPI: PCI interrupt for device 0000:00:1d.1 disabled
>ACPI: PCI interrupt for device 0000:00:1d.0 disabled
>ACPI: PCI interrupt for device 0000:00:1b.0 disabled
>Back to C!
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x95 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e015 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0x88 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e008 <keycode>' to make it known.
>PM: Writing back config space on device 0000:00:02.0 at offset f (was 100, writing 10b)
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a)
>PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was ffa7c004, writing efebc004)
>PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100102)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>PM: Writing back config space on device 0000:00:1c.0 at offset f (was 100, writing 20100)
>PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing fff0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 0, writing f0)
>PM: Writing back config space on device 0000:00:1c.0 at offset 6 (was 0, writing b0b00)
>PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PM: Writing back config space on device 0000:00:1c.1 at offset f (was 200, writing 20200)
>PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1)
>PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing efd0efd0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 0, writing f0)
>PM: Writing back config space on device 0000:00:1c.1 at offset 6 (was 0, writing c0c00)
>PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100107)
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PM: Writing back config space on device 0000:00:1c.3 at offset f (was 400, writing 20400)
>PM: Writing back config space on device 0000:00:1c.3 at offset 9 (was 10001, writing e011e001)
>PM: Writing back config space on device 0000:00:1c.3 at offset 8 (was 0, writing efc0efa0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 7 (was 0, writing d0d0)
>PM: Writing back config space on device 0000:00:1c.3 at offset 6 (was 0, writing e0d00)
>PM: Writing back config space on device 0000:00:1c.3 at offset 3 (was 810000, writing 810010)
>PM: Writing back config space on device 0000:00:1c.3 at offset 1 (was 100000, writing 100007)
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>usb usb1: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>PM: Writing back config space on device 0000:00:1d.1 at offset f (was 200, writing 20a)
>PM: Writing back config space on device 0000:00:1d.1 at offset 8 (was 1, writing bf61)
>usb usb2: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.2 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>PM: Writing back config space on device 0000:00:1d.2 at offset f (was 300, writing 307)
>PM: Writing back config space on device 0000:00:1d.2 at offset 8 (was 1, writing bf41)
>usb usb3: root hub lost power or was reset
>PCI: Enabling device 0000:00:1d.3 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>PM: Writing back config space on device 0000:00:1d.3 at offset f (was 400, writing 405)
>PM: Writing back config space on device 0000:00:1d.3 at offset 8 (was 1, writing bf21)
>usb usb4: root hub lost power or was reset
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 100f1, writing 1fff1)
>PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 90, writing ef90ef90)
>PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 2280e0f0, writing 228000f0)
>PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100007, writing 100107)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PM: Writing back config space on device 0000:00:1f.0 at offset 1 (was 2100007, writing 2100107)
>PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 204)
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>PM: Writing back config space on device 0000:00:1f.3 at offset f (was 200, writing 204)
>PM: Writing back config space on device 0000:00:1f.3 at offset 1 (was 2800001, writing 2800101)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>PM: Writing back config space on device 0000:0c:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:0c:00.0 at offset 4 (was 0, writing efdff000)
>PM: Writing back config space on device 0000:0c:00.0 at offset 3 (was 0, writing 10)
>PM: Writing back config space on device 0000:0c:00.0 at offset 1 (was 100000, writing 100102)
>PM: Writing back config space on device 0000:03:00.0 at offset f (was 100, writing 104)
>PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 0, writing ef9fe000)
>PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 4000)
>PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100106)
>PM: Writing back config space on device 0000:03:01.0 at offset f (was 4020100, writing 4020103)
>PM: Writing back config space on device 0000:03:01.0 at offset 4 (was 0, writing ef9fd800)
>PM: Writing back config space on device 0000:03:01.0 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.0 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 19
>PM: Writing back config space on device 0000:03:01.1 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.1 at offset 4 (was 0, writing ef9fd400)
>PM: Writing back config space on device 0000:03:01.1 at offset 3 (was 800000, writing 804000)
>PM: Writing back config space on device 0000:03:01.1 at offset 1 (was 2100000, writing 2100106)
>ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 18
>PM: Writing back config space on device 0000:03:01.2 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.2 at offset 4 (was 0, writing ef9fd500)
>PM: Writing back config space on device 0000:03:01.2 at offset 1 (was 2100000, writing 2100106)
>PM: Writing back config space on device 0000:03:01.3 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.3 at offset 4 (was 0, writing ef9fd600)
>PM: Writing back config space on device 0000:03:01.3 at offset 1 (was 2100000, writing 2100102)
>PM: Writing back config space on device 0000:03:01.4 at offset f (was 200, writing 20b)
>PM: Writing back config space on device 0000:03:01.4 at offset 4 (was 0, writing ef9fd700)
>PM: Writing back config space on device 0000:03:01.4 at offset 1 (was 2100000, writing 2100102)
>pnp: Device 00:04 does not support activation.
>pnp: Device 00:05 does not support activation.
>Restarting tasks ... done.
>Enabling non-boot CPUs ...
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3990.02 BogoMIPS (lpj=1995010)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel(R) Core(TM)2 CPU         T7200  @ 2.00GHz stepping 06
>CPU 1: Syncing TSC to CPU 0.
>CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 960 cycles)
>speedstep-centrino with X86_SPEEDSTEP_CENTRINO_ACPI config is deprecated.
> Use X86_ACPI_CPUFREQ (acpi-cpufreq) instead.
>CPU1 is up
>input: Lid Switch as /class/input/input13
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input14
>ACPI: Power Button (CM) [PBTN]
>input: Sleep Button (CM) as /class/input/input15
>ACPI: Sleep Button (CM) [SBTN]
>ieee1394: Initialized config rom entry `ip1394'
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19]  MMIO=[ef9fd800-ef9fdfff]  Max Packet=[2048]  IR/IT contexts=[4/4]
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ata1: EH pending after completion, repeating EH (cnt=4)
>ata1: soft resetting port
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:0c:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ata1.00: configured for UDMA/100
>ata1: EH complete
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[484fc00038e96050]
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>usb 5-1: new high speed USB device using ehci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi2 : SCSI emulation for USB Mass Storage devices
>usb-storage: device found at 2
>usb-storage: waiting for device to settle before scanning
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>scsi 2:0:0:0: Direct-Access     SanDisk  U3 Titanium      3.21 PQ: 0 ANSI: 2
>SCSI device sdb: 4013713 512-byte hdwr sectors (2055 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 03 00 00 00
>sdb: assuming drive cache: write through
>SCSI device sdb: 4013713 512-byte hdwr sectors (2055 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 03 00 00 00
>sdb: assuming drive cache: write through
> sdb: sdb1 sdb2
>sd 2:0:0:0: Attached scsi removable disk sdb
>sd 2:0:0:0: Attached scsi generic sg1 type 0
>usb-storage: device scan complete
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>BUG: soft lockup detected on CPU#0!
>
>Call Trace:
> <IRQ>  [<ffffffff802b0bc6>] softlockup_tick+0xdb/0xf6
> [<ffffffff8028f5d3>] update_process_times+0x42/0x68
> [<ffffffff80271f0c>] smp_local_timer_interrupt+0x34/0x55
> [<ffffffff802725e8>] smp_apic_timer_interrupt+0x51/0x69
> [<ffffffff8025ace6>] apic_timer_interrupt+0x66/0x70
> [<ffffffff8023c54d>] lock_timer_base+0x1b/0x3c
> [<ffffffff80210b88>] handle_IRQ_event+0x1a/0x53
> [<ffffffff80260adb>] _spin_lock_irqsave+0x9/0xe
> [<ffffffff802b1f3c>] handle_edge_irq+0xed/0x134
> [<ffffffff8021c5c2>] __mod_timer+0xa7/0xb5
> [<ffffffff8026862a>] do_IRQ+0xff/0x16d
> [<ffffffff8025a631>] ret_from_intr+0x0/0xa
> [<ffffffff80210b88>] handle_IRQ_event+0x1a/0x53
> [<ffffffff802b1f3c>] handle_edge_irq+0xed/0x134
> [<ffffffff8026862a>] do_IRQ+0xff/0x16d
> [<ffffffff8025a631>] ret_from_intr+0x0/0xa
> [<ffffffff80211ff0>] __do_softirq+0x4a/0xc3
> [<ffffffff80273fb5>] ack_apic_level+0x33/0x47
> [<ffffffff8025b23c>] call_softirq+0x1c/0x28
> [<ffffffff802684d2>] do_softirq+0x2c/0x85
> [<ffffffff80268677>] do_IRQ+0x14c/0x16d
> [<ffffffff8025a631>] ret_from_intr+0x0/0xa
> <EOI>  [<ffffffff80260aab>] _spin_unlock_irq+0xb/0xc
> [<ffffffff80289fab>] do_syslog+0x16c/0x3b2
> [<ffffffff80297bb7>] autoremove_wake_function+0x0/0x2e
> [<ffffffff8025ef4a>] thread_return+0x5e/0xf9
> [<ffffffff802f87c5>] kmsg_read+0x3a/0x44
> [<ffffffff8020b14e>] vfs_read+0xcb/0x173
> [<ffffffff80211847>] sys_read+0x45/0x6e
> [<ffffffff8025a11e>] system_call+0x7e/0x83
>
>BUG: soft lockup detected on CPU#1!
>
>Call Trace:
> <IRQ>  [<ffffffff802b0bc6>] softlockup_tick+0xdb/0xf6
> [<ffffffff8028f5d3>] update_process_times+0x42/0x68
> [<ffffffff80271f0c>] smp_local_timer_interrupt+0x34/0x55
> [<ffffffff802725e8>] smp_apic_timer_interrupt+0x51/0x69
> [<ffffffff8025ace6>] apic_timer_interrupt+0x66/0x70
> <EOI>  [<ffffffff80269794>] do_gettimeoffset_hpet+0x7/0x28
> [<ffffffff80269634>] do_gettimeofday+0x3c/0x79
> [<ffffffff80256dd2>] getnstimeofday+0x10/0x28
> [<ffffffff803353b0>] __generic_unplug_device+0x13/0x27
> [<ffffffff80299cce>] ktime_get_ts+0x1a/0x4d
> [<ffffffff8025f725>] io_schedule+0x2f/0x67
> [<ffffffff80214fdb>] sync_buffer+0x3e/0x42
> [<ffffffff8025f961>] __wait_on_bit+0x40/0x6e
> [<ffffffff80214f9d>] sync_buffer+0x0/0x42
> [<ffffffff8025f9fb>] out_of_line_wait_on_bit+0x6c/0x78
> [<ffffffff80297be5>] wake_bit_function+0x0/0x23
> [<ffffffff802393bc>] sync_dirty_buffer+0xb6/0xea
> [<ffffffff88040182>] :ext3:ext3_setup_super+0xd3/0x16f
> [<ffffffff88042159>] :ext3:ext3_fill_super+0x1109/0x14c5
> [<ffffffff802d8617>] get_filesystem+0x12/0x35
> [<ffffffff802d08fc>] test_bdev_super+0x0/0xd
> [<ffffffff88041050>] :ext3:ext3_fill_super+0x0/0x14c5
> [<ffffffff802d192f>] get_sb_bdev+0x11d/0x177
> [<ffffffff8031b92f>] selinux_sb_copy_data+0x1a1/0x1c5
> [<ffffffff802d142b>] vfs_kern_mount+0x93/0x11a
> [<ffffffff802d14f4>] do_kern_mount+0x36/0x4d
> [<ffffffff802da290>] do_mount+0x67b/0x6ef
> [<ffffffff802bde42>] zone_statistics+0x3f/0x60
> [<ffffffff8022c3be>] mntput_no_expire+0x19/0x8d
> [<ffffffff8020e7fd>] link_path_walk+0xc5/0xd7
> [<ffffffff80262af4>] do_page_fault+0x48b/0x7ca
> [<ffffffff80260ab5>] _read_unlock_irq+0x9/0xc
> [<ffffffff802076c0>] find_get_page+0x44/0x4b
> [<ffffffff802134a9>] filemap_nopage+0x180/0x338
> [<ffffffff80208ad2>] __handle_mm_fault+0x4eb/0xc78
> [<ffffffff802bde42>] zone_statistics+0x3f/0x60
> [<ffffffff8020f282>] __alloc_pages+0x72/0x2d4
> [<ffffffff80249264>] sys_mount+0x8a/0xcd
> [<ffffffff8025a11e>] system_call+0x7e/0x83
>
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts

Actions: View

Attachments on bug 234009: 151426 | 154498 | 154499