Attachment 154525 Details for Bug 239520 – 2.6.18-8 kernel dmesg & iomem output

2.6.18-8 kernel dmesg & iomem output

kernel-8-dmesg.txt (text/plain), 27.17 KB, created by masanari iida on 2007-05-11 10:04:25 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: masanari iida

Created: 2007-05-11 10:04:25 UTC

Size: 27.17 KB

patch

obsolete

>Linux version 2.6.18-8.el5 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Fri Jan 26 14:15:14 EST 2007
>Command line: ro root=LABEL=/ rhgb quiet crashkernel=128M@16M 
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
> BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cffc8000 (usable)
> BIOS-e820: 00000000cffc8000 - 00000000cffd0000 (ACPI data)
> BIOS-e820: 00000000cffd0000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 000000016ffff000 (usable)
>DMI 2.3 present.
>ACPI: RSDP (v002 HP                                    ) @ 0x00000000000f4f00
>ACPI: XSDT (v001 HP     P57      0x00000002 Ò 0x0000162e) @ 0x00000000cffc8300
>ACPI: FADT (v003 HP     P57      0x00000002 Ò 0x0000162e) @ 0x00000000cffc8380
>ACPI: SPCR (v001 HP     SPCRRBSU 0x00000001 Ò 0x0000162e) @ 0x00000000cffc8100
>ACPI: MCFG (v001 HP     ProLiant 0x00000001  0x00000000) @ 0x00000000cffc8180
>ACPI: HPET (v001 HP     P57      0x00000002 Ò 0x0000162e) @ 0x00000000cffc81c0
>ACPI: SPMI (v005 HP     ProLiant 0x00000001 Ò 0x0000162e) @ 0x00000000cffc8200
>ACPI: MADT (v001 HP     00000083 0x00000002  0x00000000) @ 0x00000000cffc8240
>ACPI: SSDT (v001 HP        SSDTP 0x00000001 INTL 0x20030228) @ 0x00000000cffcd000
>ACPI: DSDT (v001 HP         DSDT 0x00000001 INTL 0x20030228) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-000000016ffff000
>Bootmem setup node 0 0000000000000000-000000016ffff000
>On node 0 totalpages: 1288745
>  DMA zone: 2729 pages, LIFO batch:0
>  DMA32 zone: 833536 pages, LIFO batch:31
>  Normal zone: 452480 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x908
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
>Processor #6 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
>Processor #7 6:15 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24])
>IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x10228201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009e000 - 000000000009f000
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Nosave address range: 00000000cffc8000 - 00000000cffd0000
>Nosave address range: 00000000cffd0000 - 00000000d0000000
>Nosave address range: 00000000d0000000 - 00000000fec00000
>Nosave address range: 00000000fec00000 - 00000000fed00000
>Nosave address range: 00000000fed00000 - 00000000fee00000
>Nosave address range: 00000000fee00000 - 00000000fee10000
>Nosave address range: 00000000fee10000 - 00000000ffc00000
>Nosave address range: 00000000ffc00000 - 0000000100000000
>Allocating PCI resources starting at d4000000 (gap: d0000000:2ec00000)
>SMP: Allowing 8 CPUs, 4 hotplug CPUs
>Built 1 zonelists.  Total pages: 1288745
>Kernel command line: ro root=LABEL=/ rhgb quiet crashkernel=128M@16M 
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Checking aperture...
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0xed25000 - 0x12d25000
>Memory: 4943484k/6029308k available (2397k kernel code, 298776k reserved, 1222k data, 196k init)
>Calibrating delay using timer specific routine.. 5337.29 BogoMIPS (lpj=2668647)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM2)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 20834097
>Detected 20.834 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5333.51 BogoMIPS (lpj=2666758)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5150  @ 2.66GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 5333.09 BogoMIPS (lpj=2666547)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU2: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5150  @ 2.66GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 5333.76 BogoMIPS (lpj=2666883)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>CPU3: Thermal monitoring enabled (TM2)
>Intel(R) Xeon(R) CPU            5150  @ 2.66GHz stepping 06
>Brought up 4 CPUs
>testing NMI watchdog ... OK.
>time.c: Using 14.318180 MHz WALL HPET GTOD HPET/TSC timer.
>time.c: Detected 2666.766 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>migration_cost=38,7483
>checking if image is initramfs... it is
>Freeing initrd memory: 1493k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>Boot video device is 0000:01:03.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IPTB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT05._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfed00000 (virtual 0xffffffffff5fe000), IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>PCI-GART: No AMD northbridge found.
>pnp: 00:01: ioport range 0x408-0x40f has been reserved
>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:01: ioport range 0x700-0x71f has been reserved
>PCI: Bridge: 0000:0a:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:0a:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:0a:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.3
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: fde00000-fdefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: 4000-4fff
>  MEM window: fdc00000-fddfffff
>  PREFETCH window: d4000000-d40fffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:20:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:1f:00.0
>  IO window: 5000-5fff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: d4100000-d41fffff
>PCI: Bridge: 0000:00:07.0
>  IO window: 5000-5fff
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: d4100000-d41fffff
>PCI: Bridge: 0000:02:00.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: d4200000-d42fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f8000000-f9ffffff
>  PREFETCH window: d4200000-d42fffff
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: fa000000-fbffffff
>  PREFETCH window: d4300000-d43fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: fa000000-fbffffff
>  PREFETCH window: d4300000-d43fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 2000-3fff
>  MEM window: f7e00000-f7ffffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>GSI 16 sharing vector 0xA9 and IRQ 16
>ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:0a:00.0 to 64
>GSI 17 sharing vector 0xB1 and IRQ 17
>ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:0a:01.0 to 64
>GSI 18 sharing vector 0xB9 and IRQ 18
>ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:0a:02.0 to 64
>PCI: Setting latency timer of device 0000:09:00.3 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:1f:00.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>audit: initializing netlink socket (disabled)
>audit(1178890445.640:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 6E92D7462CAE45D
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[25e2:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pcie_portdrv_probe->Dev[25e3:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[25f8:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pcie_portdrv_probe->Dev[25e5:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[25e6:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcie_portdrv_probe->Dev[25e7:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>pcie_portdrv_probe->Dev[3500:8086] has invalid IRQ. Check vendor BIOS
>Allocate Port Service[0000:09:00.0:pcie10]
>PCI: Setting latency timer of device 0000:0a:00.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:0a:00.0:pcie20]
>PCI: Setting latency timer of device 0000:0a:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:0a:01.0:pcie20]
>PCI: Setting latency timer of device 0000:0a:02.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:0a:02.0:pcie20]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [   SSDT0] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [   SSDT1] [20060707]
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x2
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x3
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x4
>ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
>ACPI: Getting cpuindex for acpiid 0x5
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [   SSDT6] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [HP    ] OemTableId [   SSDT7] [20060707]
>ACPI: Thermal Zone [THM0] (8 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ESB2: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 177
>ESB2: chipset revision 9
>ESB2: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: TSSTcorp CD-ROM TS-H192C, ATAPI CD/DVD-ROM drive
>hdb: HL-DT-STDVDRRW GWA-4166B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S4 S5)
>Freeing unused kernel memory: 196k freed
>Write protecting the kernel read-only data: 460k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 177, io base 0x00001020
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 185
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 185, io base 0x00001040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>GSI 19 sharing vector 0x62 and IRQ 19
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 98
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 98, io base 0x00001060
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>GSI 20 sharing vector 0x6A and IRQ 20
>ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 106
>uhci_hcd 0000:01:04.4: UHCI Host Controller
>uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports
>uhci_hcd 0000:01:04.4: irq 106, io base 0x00003800
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 169, io mem 0xf7df0000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 8 ports detected
>SCSI subsystem initialized
>HP CISS Driver (v 3.6.14-RH1)
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input1
>cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 130 using DAC
>      blocks= 143299800 block_size= 512
>      heads= 255, sectors= 63, cylinders= 8920
>
>      blocks= 143299800 block_size= 512
>      heads= 255, sectors= 63, cylinders= 8920
>
> cciss/c0d0: p1 p2
>ACPI: PCI Interrupt 0000:20:08.0[A] -> GSI 16 (level, low) -> IRQ 169
>cciss1: <0x3238> at PCI 0000:20:08.0 IRQ 146 using DAC
>usb 5-1: new full speed USB device using uhci_hcd and address 2
>usb 5-1: configuration #1 chosen from 1 choice
>input: HP Virtual Keyboard as /class/input/input2
>input: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1
>input: HP Virtual Keyboard as /class/input/input3
>input: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1
>usb 5-2: new full speed USB device using uhci_hcd and address 3
>usb 5-2: configuration #1 chosen from 1 choice
>hub 5-2:1.0: USB hub found
>hub 5-2:1.0: 7 ports detected
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1178890452.417:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.4.44-1 (August 10, 2006)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 169, node addr 0017085b39b2
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 177
>eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 177, node addr 0017085b39b4
>intel_rng: FWH not detected
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hda: ATAPI 48X CD-ROM drive, 96kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>hdb: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>lp: driver loaded but no devices found
>ACPI: Power Button (FF) [PWRF]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>EXT3 FS on cciss/c0d0p1, internal journal
>Adding 7164980k swap on /dev/cciss/c0d0p2.  Priority:-1 extents:1 across:7164980k
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>acpi-cpufreq: CPU0 - ACPI performance management activated.
>acpi-cpufreq: CPU1 - ACPI performance management activated.
>acpi-cpufreq: CPU2 - ACPI performance management activated.
>acpi-cpufreq: CPU3 - ACPI performance management activated.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>bnx2: eth0: using MSI
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>bnx2: eth0 NIC Link is Up, 1000 Mbps full duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1178858065.302:3): audit_pid=2408 old=0 by auid=4294967295
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>
>
># uname -a
>Linux localhost.localdomain 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
>
>
># cat /proc/iomem
>00000000-0009ebff : System RAM
>0009ec00-0009ffff : reserved
>000a0000-000bffff : Video RAM area
>000c0000-000cafff : Video ROM
>000f0000-000fffff : System ROM
>00100000-cffc7fff : System RAM
>  00200000-0045779d : Kernel code
>  0045779e-00589097 : Kernel data
>  01000000-08ffffff : Crash kernel
>cffc8000-cffcffff : ACPI Tables
>cffd0000-cfffffff : reserved
>d4000000-d40fffff : PCI Bus #06
>  d4000000-d403ffff : 0000:06:00.0
>d4100000-d41fffff : PCI Bus #1f
>  d4100000-d41fffff : PCI Bus #20
>    d4100000-d4103fff : 0000:20:08.0
>d4200000-d42fffff : PCI Bus #02
>  d4200000-d42fffff : PCI Bus #03
>    d4200000-d42007ff : 0000:03:00.0
>d4300000-d43fffff : PCI Bus #04
>  d4300000-d43fffff : PCI Bus #05
>    d4300000-d43007ff : 0000:05:00.0
>d8000000-dfffffff : PCI Bus #01
>  d8000000-dfffffff : 0000:01:03.0
>f7df0000-f7df03ff : 0000:00:1d.7
>  f7df0000-f7df03ff : ehci_hcd
>f7e00000-f7ffffff : PCI Bus #01
>  f7e00000-f7e1ffff : 0000:01:03.0
>  f7e20000-f7e2ffff : 0000:01:04.2
>  f7ef0000-f7ef00ff : 0000:01:04.6
>  f7f00000-f7f7ffff : 0000:01:04.2
>  f7fc0000-f7fc1fff : 0000:01:04.2
>  f7fd0000-f7fd07ff : 0000:01:04.2
>  f7fe0000-f7fe01ff : 0000:01:04.0
>  f7ff0000-f7ffffff : 0000:01:03.0
>f8000000-f9ffffff : PCI Bus #02
>  f8000000-f9ffffff : PCI Bus #03
>    f8000000-f9ffffff : 0000:03:00.0
>      f8000000-f9ffffff : bnx2
>fa000000-fbffffff : PCI Bus #04
>  fa000000-fbffffff : PCI Bus #05
>    fa000000-fbffffff : 0000:05:00.0
>      fa000000-fbffffff : bnx2
>fdc00000-fddfffff : PCI Bus #06
>  fdcf0000-fdcf0fff : 0000:06:00.0
>    fdcf0000-fdcf0fff : cciss
>  fdd00000-fddfffff : 0000:06:00.0
>    fdd00000-fddfffff : cciss
>fde00000-fdefffff : PCI Bus #09
>fdf00000-fdffffff : PCI Bus #1f
>  fdf00000-fdffffff : PCI Bus #20
>    fdf70000-fdf77fff : 0000:20:08.0
>      fdf70000-fdf77fff : cciss
>    fdf80000-fdffffff : 0000:20:08.0
>      fdf80000-fdffffff : cciss
>fec00000-fecfffff : reserved
>fee00000-fee0ffff : reserved
>ffc00000-ffffffff : reserved
>100000000-16fffefff : System RAM
># 
># uname -a
>Linux localhost.localdomain 2.6.18-8.el5 #1 SMP Fri Jan 26 14:15:14 EST 2007 x86_64 x86_64 x86_64 GNU/Linux
># 
>
>

Actions: View

Attachments on bug 239520: 154479 | 154525 | 154526