Attachment 154608 Details for Bug 235902 – /var/log/dmesg from FC5 on Acer TM612TX

/var/log/dmesg from FC5 on Acer TM612TX

dmesg (text/plain), 17.05 KB, created by Elio Tondo on 2007-05-13 09:12:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Elio Tondo

Created: 2007-05-13 09:12:54 UTC

Size: 17.05 KB

patch

obsolete

>Linux version 2.6.15-1.2054_FC5 (bhcompile@hs20-bc1-3.build.redhat.com) (gcc version 4.1.0 20060304 (Red Hat 4.1.0-3)) #1 Tue Mar 14 15:48:33 EST 2006
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000cc000 - 00000000000d0000 (reserved)
> BIOS-e820: 00000000000e4800 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe70000 (usable)
> BIOS-e820: 000000001fe70000 - 000000001fe7fc00 (ACPI data)
> BIOS-e820: 000000001fe7fc00 - 000000001fe80000 (ACPI NVS)
> BIOS-e820: 000000001fe80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 130672
>  DMA zone: 4096 pages, LIFO batch:0
>  DMA32 zone: 0 pages, LIFO batch:0
>  Normal zone: 126576 pages, LIFO batch:31
>  HighMem zone: 0 pages, LIFO batch:0
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6550
>ACPI: RSDT (v001 PTLTD  	 RSDT   0x06040000  LTP 0x00000000) @ 0x1fe7babe
>ACPI: FADT (v001 Acer   TM610    0x06040000 Acer 0x00000001) @ 0x1fe7fb64
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1fe7fbd8
>ACPI: DSDT (v001  INTEL SolanoM2 0x06040000 MSFT 0x0100000d) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 30000000 (gap: 20000000:df800000)
>Built 1 zonelists
>Kernel command line: ro root=LABEL=/1
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01401000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c03d4000 soft=c03d3000
>PID hash table entries: 2048 (order: 11, 32768 bytes)
>Detected 898.156 MHz processor.
>Using pmtmr for high-res timesource
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 513308k/522688k available (1914k kernel code, 8728k reserved, 774k data, 176k init, 0k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1799.14 BogoMIPS (lpj=3598289)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: After vendor identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU: Intel Pentium III (Coppermine) stepping 0a
>Checking 'hlt' instruction... OK.
>ACPI: setting ELCR to 0200 (from 0c00)
>checking if image is initramfs... it is
>Freeing initrd memory: 899k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd790, last bus=1
>PCI: Using configuration type 1
>ACPI: Subsystem revision 20060127
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #02 (-#05) may be hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
>PCI: Bus #06 (-#09) may be hidden behind transparent bridge #01 (-#01) (try 'pci=assign-busses')
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: Embedded Controller [EC0] (gpe 29) interrupt mode.
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 7 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 7 *10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 7 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 7 *10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 7 10 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 7 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 7 10 11) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 2, cardbus bridge: 0000:01:0f.0
>  IO window: 00003400-000034ff
>  IO window: 00003800-000038ff
>  PREFETCH window: 30000000-31ffffff
>  MEM window: 34000000-35ffffff
>PCI: Bus 6, cardbus bridge: 0000:01:0f.1
>  IO window: 00003c00-00003cff
>  IO window: 00001400-000014ff
>  PREFETCH window: 32000000-33ffffff
>  MEM window: 36000000-37ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: f4100000-f41fffff
>  PREFETCH window: 30000000-33ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:01:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:01:0f.0 to 64
>ACPI: PCI Interrupt 0000:01:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:01:0f.1 to 64
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1178797615.628:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key EE596B44DDA71123
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Thermal Zone [THRM] (28 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i815 Chipset.
>agpgart: detected 4MB dedicated video ram.
>agpgart: AGP aperture is 64M @ 0xf8000000
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH2M: IDE controller at PCI slot 0000:00:1f.1
>ICH2M: chipset revision 3
>ICH2M: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1800-0x1807, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x1808-0x180f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: Hitachi HTS541040G9AT00, ATA DISK drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: SR243T1, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 78140160 sectors (40007 MB) w/7539KiB Cache, CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>hdc: ATAPI 24X CD-ROM drive, 128kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ide-floppy driver 0.99.newide
>ACPI: PCI Interrupt 0000:01:0f.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:01:0f.0 [1025:1016]
>Yenta O2: res at 0x94/0xD4: e8/00
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
>Socket status: 30000820
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>ACPI: PCI Interrupt 0000:01:0f.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>Yenta: CardBus bridge found at 0000:01:0f.1 [1025:1016]
>Yenta: ISA IRQ mask 0x00b8, PCI irq 11
>Socket status: 30000410
>pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
>cs: IO port probe 0x3000-0x3fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xf4100000 - 0xf41fffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x33ffffff
>usbcore: registered new driver libusual
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 262144 bytes)
>TCP bind hash table entries: 16384 (order: 6, 327680 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI Shortcut mode
>ACPI wakeup devices: 
>SLPB  HUB USB1 USB2 AC97  LID BATA BATB 
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 176k freed
>Write protecting the kernel read-only data: 359k
>input: AT Translated Set 2 keyboard as /class/input/input0
>pccard: CardBus card inserted into slot 0
>pccard: PCMCIA card inserted into slot 1
>cs: memory probe 0xf4100000-0xf41fffff: excluding 0xf4100000-0xf410ffff
>pcmcia: registering new device pcmcia1.0
>Synaptics Touchpad, model: 1, fw: 4.6, id: 0x925ea1, caps: 0x80471b/0x0
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1161 types, 135 bools, 1 sens, 256 cats
>security:  55 classes, 38679 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev hda3, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses genfs_contexts
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>hw_random: RNG not detected
>i810_smbus 0000:00:02.0: i810/i815 i2c device found.
>PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
>e100: Copyright(c) 1999-2005 Intel Corporation
>intel8x0_measure_ac97_clock: measured 55061 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xf4100000, irq 11, MAC addr 00:00:E2:54:78:2E
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>PCI: Enabling device 0000:02:00.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ohci_hcd 0000:02:00.0: OHCI Host Controller
>ohci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:02:00.0: irq 11, io mem 0x34000000
>USB Universal Host Controller Interface driver v2.3
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.2: irq 10, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>cs: IO port probe 0x3d4-0x4ff: excluding 0x4cc-0x4d3
>cs: IO port probe 0x3c0-0x3d2: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x158-0x15fPCI: Enabling device 0000:00:1f.4 (0000 -> 0001)
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1f.4: irq 11, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
> 0x360-0x367 0x378-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x800-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x3d4-0x4ff: excluding 0x4cc-0x4d3
>cs: IO port probe 0x3c0-0x3d2: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x158-0x15f 0x360-0x367 0x378-0x37f
>cs: IO port probe 0xc00-0xcff: clean.
>cs: IO port probe 0x800-0x8ff: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>PCI: Enabling device 0000:02:00.2 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>ehci_hcd 0000:02:00.2: EHCI Host Controller
>ehci_hcd 0000:02:00.2: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:02:00.2: irq 11, io mem 0x34002000
>ehci_hcd 0000:02:00.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>PCI: Enabling device 0000:02:00.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>ohci_hcd 0000:02:00.1: OHCI Host Controller
>ohci_hcd 0000:02:00.1: new USB bus registered, assigned bus number 5
>ohci_hcd 0000:02:00.1: irq 11, io mem 0x34001000
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>usb 2-2: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0 as /class/input/input2
>input: USB HID v1.10 Mouse [Microsoft Microsoft Notebook/Mobile Optical Mouse 2.0] on usb-0000:00:1f.2-2
>usb 4-1: new high speed USB device using ehci_hcd and address 2
>usb 4-1: configuration #1 chosen from 1 choice
>Non-volatile memory driver v1.2
>floppy0: no floppy controllers found
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BATA] (battery absent)
>ACPI: Battery Slot [BATB] (battery absent)
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>ACPI: Video Device [GRFX] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: 4.5.0-ioctl (2005-10-04) initialised: dm-devel@redhat.com
>EXT3 FS on hda3, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1052248k swap on /dev/hda4.  Priority:-1 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 235902: 152487 | 152852 | 152853 | 152966 | 152967 | 152968 | 152969 | 152986 | 153056 | 153057 | 154592 | 154608 | 155980 | 157394