Attachment 154772 Details for Bug 240221 – plain kernel, boots up ok with irqpoll

plain kernel, boots up ok with irqpoll

log-rawhide-notxen-irqpoll-working (text/plain), 20.27 KB, created by Kai Engert (:kaie) (inactive account) on 2007-05-15 19:56:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kai Engert (:kaie) (inactive account)

Created: 2007-05-15 19:56:29 UTC

Size: 20.27 KB

patch

obsolete

>ÀLinux version 2.6.20-1.3104.fc7 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.2 20070418 (Red Hat 4.1.2-10)) #1 SMP Sat Apr 21 22:20:43 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fddf800 end: 000000007fedf800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fedf800 size: 0000000000000800 end: 000000007fee0000 type: 2
>copy_e820_map() start: 000000007fee0000 size: 0000000000003000 end: 000000007fee3000 type: 4
>copy_e820_map() start: 000000007fee3000 size: 000000000000d000 end: 000000007fef0000 type: 3
>copy_e820_map() start: 000000007fef0000 size: 0000000000010000 end: 000000007ff00000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fedf800 (usable)
> BIOS-e820: 000000007fedf800 - 000000007fee0000 (reserved)
> BIOS-e820: 000000007fee0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f51d0
>Using x86 segment limits to approximate NX protection
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523999
>early_node_map[1] active PFN ranges
>    0:        0 ->   523999
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP 000F91A0, 0014 (r0 IntelR)
>ACPI: RSDT 7FEE3040, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3180, 4744 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS 7FEE0000, 0040
>ACPI: MCFG 7FEE7A40, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEE7940, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: SSDT 7FEE7AC0, 015C (r1  PmRef  Cpu0Ist     3000 INTL 20041203)
>ACPI: SSDT 7FEE7F50, 02F1 (r1  PmRef    CpuPm     3000 INTL 20040311)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:60100000)
>Built 1 zonelists.  Total pages: 517347
>Kernel command line: ro root=/dev/md1 irqpoll console=ttyS0,9600n8 console=tty0
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079f000 soft=c077f000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2129.809 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 1096 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2057536k/2095996k available (2150k kernel code, 37056k reserved, 1140k data, 248k init, 1178492k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073c000 - 0xc077a000   ( 248 kB)
>      .data : 0xc06199fd - 0xc0736cb4   (1140 kB)
>      .text : 0xc0400000 - 0xc06199fd   (2150 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4296.75 BogoMIPS (lpj=2148375)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>lockdep: not fixing up alternatives.
>ACPI: Core revision 20070126
>CPU0: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
>lockdep: not fixing up alternatives.
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07a0000 soft=c0780000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4258.80 BogoMIPS (lpj=2129401)
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU          6420  @ 2.13GHz stepping 06
>Total of 2 processors activated (8555.55 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>migration_cost=25
>Time:  3:26:06  Date: 04/16/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfb3e0, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0a: ioport range 0x400-0x4bf could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0d: iomem range 0xf0000-0xf3fff could not be reserved
>pnp: 00:0d: iomem range 0xf4000-0xf7fff could not be reserved
>pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: b000-bfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 65536 (order: 9, 2359296 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 65536 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2908k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1179285961.075:1): initialized
>highmem bounce pool size: 64 pages
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 6581DC39491C512
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: SSDT 7FEE7EC0, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20041203)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (43 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 965G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ÿserial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:883:411
>Freeing unused kernel memory: 248k freed
>Write protecting the kernel read-only data: 846k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 17
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000fe00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 18
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 18, io base 0x0000fd00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000fb00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>ehci_hcd 0000:00:1a.7: irq 20, io mem 0xfdfff000
>usb 5-2: new low speed USB device using uhci_hcd and address 2
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb 5-2: configuration #1 chosen from 1 choice
>usb usb6: configuration #1 chosen from 1 choice
>input: HID 2101:020f as /class/input/input1
>input: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:1d.2-2
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>input: HID 2101:020f as /class/input/input2
>input: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:1d.2-2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 18
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfdffe000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>usb 5-2: USB disconnect, address 2
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  7840.000 MB/sec
>raid5: using function: pIII_sse (7840.000 MB/sec)
>raid6: int32x1    773 MB/s
>raid6: int32x2    773 MB/s
>raid6: int32x4    667 MB/s
>raid6: int32x8    687 MB/s
>raid6: mmxx1     2738 MB/s
>raid6: mmxx2     3070 MB/s
>raid6: sse1x1    1859 MB/s
>usb 5-2: new low speed USB device using uhci_hcd and address 3
>raid6: sse1x2    2597 MB/s
>raid6: sse2x1    3425 MB/s
>usb 5-2: configuration #1 chosen from 1 choice
>input: HID 2101:020f as /class/input/input3
>raid6: sse2x2    5339 MB/s
>raid6: using algorithm sse2x2 (5339 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>input: USB HID v1.01 Keyboard [HID 2101:020f] on usb-0000:00:1d.2-2
>SCSI subsystem initialized
>ata_piix 0000:00:1f.2: MAP [<6>input: HID 2101:020f as /class/input/input4
>input: USB HID v1.01 Mouse [HID 2101:020f] on usb-0000:00:1d.2-2
> P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>ata1: SATA max UDMA/133 cmd 0x0001fa00 ctl 0x0001f902 bmdma 0x0001f600 irq 19
>ata2: SATA max UDMA/133 cmd 0x0001f800 ctl 0x0001f702 bmdma 0x0001f608 irq 19
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata1.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA7
>ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata2.00: ATA-7: SAMSUNG HD160JJ, WU100-33, max UDMA7
>ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  WU10 PQ: 0 ANSI: 5
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  WU10 PQ: 0 ANSI: 5
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>sdb: Write Protect is off
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>sd 1:0:0:0: Attached scsi disk sdb
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>ata3: SATA max UDMA/133 cmd 0x0001f300 ctl 0x0001f202 bmdma 0x0001ef00 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001f100 ctl 0x0001f002 bmdma 0x0001ef08 irq 19
>scsi2 : ata_piix
>ata3.00: ATAPI, max UDMA/100
>ata3.00: configured for UDMA/100
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x0001f107
>scsi 2:0:0:0: CD-ROM            HL-DT-ST DVD-RAM GSA-H30N 1.01 PQ: 0 ANSI: 5
>PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 21
>ata5: PATA max UDMA/100 cmd 0x0001bf00 ctl 0x0001be02 bmdma 0x0001bb00 irq 21
>ata6: PATA max UDMA/100 cmd 0x0001bd00 ctl 0x0001bc02 bmdma 0x0001bb08 irq 21
>scsi4 : pata_jmicron
>scsi5 : pata_jmicron
>ATA: abnormal status 0x7F on port 0x0001bd07
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata7: SATA max UDMA/133 cmd 0xf8840100 ctl 0x00000000 bmdma 0x00000000 irq 16
>ata8: SATA max UDMA/133 cmd 0xf8840180 ctl 0x00000000 bmdma 0x00000000 irq 16
>scsi6 : ahci
>ata7: SATA link down (SStatus 0 SControl 300)
>scsi7 : ahci
>ata8: SATA link down (SStatus 120 SControl 300)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering sdb6 ...
>md:  adding sdb6 ...
>md: sdb5 has different UUID to sdb6
>md: sdb2 has different UUID to sdb6
>md: sdb1 has different UUID to sdb6
>md:  adding sda6 ...
>md: sda5 has different UUID to sdb6
>md: sda2 has different UUID to sdb6
>md: sda1 has different UUID to sdb6
>md: created md3
>md: bind<sda6>
>md: bind<sdb6>
>md: running: <sdb6><sda6>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: considering sdb5 ...
>md:  adding sdb5 ...
>md: sdb2 has different UUID to sdb5
>md: sdb1 has different UUID to sdb5
>md:  adding sda5 ...
>md: sda2 has different UUID to sdb5
>md: sda1 has different UUID to sdb5
>md: created md2
>md: bind<sda5>
>md: bind<sdb5>
>md: running: <sdb5><sda5>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering sdb2 ...
>md:  adding sdb2 ...
>md: sdb1 has different UUID to sdb2
>md:  adding sda2 ...
>md: sda1 has different UUID to sdb2
>md: created md1
>md: bind<sda2>
>md: bind<sdb2>
>md: running: <sdb2><sda2>
>md: kicking non-fresh sdb2 from array!
>md: unbind<sdb2>
>md: export_rdev(sdb2)
>raid1: raid set md1 active with 1 out of 2 mirrors
>md: considering sdb1 ...
>md:  adding sdb1 ...
>md:  adding sda1 ...
>md: created md0
>md: bind<sda1>
>md: bind<sdb1>
>md: running: <sdb1><sda1>
>md: kicking non-fresh sdb1 from array!
>md: unbind<sdb1>
>md: export_rdev(sdb1)
>raid1: raid set md0 active with 1 out of 2 mirrors
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1179285986.571:2): enforcing=1 old_enforcing=0 auid=4294967295
>audit(1179285987.071:3): policy loaded auid=4294967295
>Bridge firewalling registered
>AT

Actions: View

Attachments on bug 240221: 154769 | 154770 | 154771 | 154772 | 154773 | 154774