Attachment 154862 Details for Bug 240343 – dmesg for kernel-2.6.21-1.3149.fc7 with bcm43xx-mac80211

dmesg for kernel-2.6.21-1.3149.fc7 with bcm43xx-mac80211

3149-mac.txt (text/plain), 26.61 KB, created by Dino Sangoi on 2007-05-16 19:26:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Dino Sangoi

Created: 2007-05-16 19:26:33 UTC

Size: 26.61 KB

patch

obsolete

>Linux version 2.6.21-1.3149.fc7 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Fri May 11 12:12:11 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003ded0000 end: 000000003dfd0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003dfd0000 size: 000000000001fc00 end: 000000003dfefc00 type: 2
>copy_e820_map() start: 000000003dfefc00 size: 000000000000b400 end: 000000003dffb000 type: 4
>copy_e820_map() start: 000000003dffb000 size: 0000000002005000 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000002000 end: 00000000fec02000 type: 2
>copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003dfd0000 (usable)
> BIOS-e820: 000000003dfd0000 - 000000003dfefc00 (reserved)
> BIOS-e820: 000000003dfefc00 - 000000003dffb000 (ACPI NVS)
> BIOS-e820: 000000003dffb000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec02000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>95MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 253904) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   253904
>early_node_map[1] active PFN ranges
>    0:        0 ->   253904
>On node 0 totalpages: 253904
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 239 pages used for memmap
>  HighMem zone: 24289 pages, LIFO batch:3
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FE270, 0014 (r0 HP    )
>ACPI: RSDT 3DFEFC84, 0034 (r1 HP     0944     22110520 HP          1)
>ACPI: FACP 3DFEFC00, 0084 (r2 HP     0944            2 HP          1)
>ACPI: DSDT 3DFEFD50, 7489 (r1 HP        SB400    10000 MSFT  100000E)
>ACPI: FACS 3DFFAE80, 0040
>ACPI: APIC 3DFEFCB8, 005A (r1 HP     0944            1 HP          1)
>ACPI: MCFG 3DFEFD14, 003C (r1 HP     0944            1 HP          1)
>ACPI: SSDT 3DFF71D9, 0382 (r1 HP       HPQPpc     1001 MSFT  100000E)
>ATI board detected. Disabling timer routing over 8254.
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfec01000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 33, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 21 low level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:a0000000)
>Built 1 zonelists.  Total pages: 251425
>Kernel command line: ro root=LABEL=/1
>mapped APIC to ffffd000 (fec01000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0782000 soft=c0762000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1795.696 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 997112k/1015616k available (2079k kernel code, 17876k reserved, 1103k data, 240k init, 98112k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0721000 - 0xc075d000   ( 240 kB)
>      .data : 0xc0607d77 - 0xc071bcb4   (1103 kB)
>      .text : 0xc0400000 - 0xc0607d77   (2079 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3593.48 BogoMIPS (lpj=1796744)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: After all inits, caps: 078bf3ff e3d3fbff 00000000 00000410 00000001 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>CPU0: AMD Turion(tm) 64 Mobile ML-34                  stepping 02
>Total of 1 processors activated (3593.48 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>..MP-BIOS bug: 8254 timer not connected to IO-APIC
>...trying to set up timer (IRQ0) through the 8259A ...  failed.
>...trying to set up timer as Virtual Wire IRQ... works.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>Time: 20:33:25  Date: 04/16/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0322, last bus=32
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C047] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:05.0
>PCI: Transparent bridge - 0000:00:14.4
>PCI: Bus #03 (-#06) is hidden behind transparent bridge #02 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.C047._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C047.C048._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C047.C0AB._PRT]
>ACPI: PCI Interrupt Link [C0F0] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F1] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F2] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F3] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F4] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F5] (IRQs 9) *0, disabled.
>ACPI: PCI Interrupt Link [C0F6] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [C0F7] (IRQs *10 11)
>ACPI: Power Resource [C1CF] (off)
>ACPI: Power Resource [C1B7] (on)
>ACPI: Power Resource [C1C7] (on)
>ACPI: Power Resource [C26C] (off)
>ACPI: Power Resource [C26D] (off)
>ACPI: Power Resource [C26E] (off)
>ACPI: Power Resource [C26F] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>PCI: Cannot allocate resource region 7 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:04.0
>PCI: Cannot allocate resource region 7 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 8 of bridge 0000:00:05.0
>PCI: Cannot allocate resource region 9 of bridge 0000:00:05.0
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x3dffffff could not be reserved
>pnp: 00:09: ioport range 0x40b-0x40b has been reserved
>Time: tsc clocksource has been installed.
>pnp: 00:09: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:09: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:09: iomem range 0xffb80000-0xffbfffff could not be reserved
>pnp: 00:09: iomem range 0xfff80000-0xffffffff could not be reserved
>pnp: 00:0a: ioport range 0x8000-0x802f has been reserved
>pnp: 00:0a: ioport range 0x8100-0x811f has been reserved
>pnp: 00:0a: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0a: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0b: iomem range 0xcf000-0xdffff has been reserved
>pnp: 00:0b: iomem range 0x3e000000-0x3fffffff could not be reserved
>pnp: 00:0b: iomem range 0xfec01000-0xfec01fff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: c4400000-c47fffff
>  PREFETCH window: c0000000-c3ffffff
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bus 3, cardbus bridge: 0000:02:04.0
>  IO window: 00001000-000010ff
>  IO window: 00001400-000014ff
>  PREFETCH window: 50000000-53ffffff
>  MEM window: 54000000-57ffffff
>PCI: Bridge: 0000:00:14.4
>  IO window: 1000-1fff
>  MEM window: c4000000-c43fffff
>  PREFETCH window: 50000000-53ffffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 20 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2796k freed
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1179347605.266:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4EF70E6F5092383F
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie02]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C270] to D3
>ACPI: Transitioning device [C270] to D3
>ACPI: Fan [C270] (off)
>ACPI: Transitioning device [C271] to D3
>ACPI: Transitioning device [C271] to D3
>ACPI: Fan [C271] (off)
>ACPI: Transitioning device [C272] to D3
>ACPI: Transitioning device [C272] to D3
>ACPI: Fan [C272] (off)
>ACPI: Transitioning device [C273] to D3
>ACPI: Transitioning device [C273] to D3
>ACPI: Fan [C273] (off)
>ACPI: CPU0 (power states: C1[C1] C3[C3])
>ACPI: Processor [C000] (supports 8 throttling states)
>ACPI: Thermal Zone [TZ1] (53 C)
>ACPI: Thermal Zone [TZ2] (44 C)
>ACPI: Thermal Zone [TZ3] (32 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:14.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:04.0 [103c:308b]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:04.0, mfunc 0x01a11b22, devctl 0x64
>Time: acpi_pm clocksource has been installed.
>Yenta: ISA IRQ mask 0x0ef8, PCI irq 16
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#02) from #03 to #06
>pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
>cs: IO port probe 0x1000-0x1fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc4000000 - 0xc43fffff
>pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:C1C4,PNP0f13:C1C5] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 AMD Turion(tm) 64 Mobile ML-34                  processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0x4
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0x6
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x16
>powernow-k8: ph2 null fid transition 0xa
>Using IPI No-Shortcut mode
>  Magic number: 7:347:599
>  hash matches device serial8250
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 825k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.0: OHCI Host Controller
>ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:13.0: irq 18, io mem 0xc4800000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low) -> IRQ 18
>ohci_hcd 0000:00:13.1: OHCI Host Controller
>ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:13.1: irq 18, io mem 0xc4801000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 4 ports detected
>ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low) -> IRQ 18
>ehci_hcd 0000:00:13.2: EHCI Host Controller
>ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:13.2: irq 18, io mem 0xc4802000
>ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 8 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1a0b1, caps: 0xa04713/0x200000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 19
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00013010 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00013018 irq 15
>scsi0 : pata_atiixp
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-6: TOSHIBA MK8026GAX, PA002G, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>scsi1 : pata_atiixp
>ata2.00: ATAPI, max MWDMA2
>ata2.00: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK8026GA PA00 PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 <<6>usb 2-1: new full speed USB device using ohci_hcd and address 2
> sda5 sda6 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            TEAC     DV-W28EW         C.0S PQ: 0 ANSI: 5
>usb 2-1: configuration #1 chosen from 1 choice
>usb 1-2: new full speed USB device using ohci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1179347613.560:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>input: PC Speaker as /class/input/input3
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: clean.
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: excluding 0xc00-0xc07 0xc10-0xc17 0xc50-0xc57 0xc68-0xc6f 0xcd0-0xcdf
>cs: IO port probe 0xa00-0xaff: clean.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>EDAC MC: Ver: 2.0.1 May 11 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
>tg3.c:v3.75 (March 23, 2007)
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 23 (level, low) -> IRQ 20
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>eth0: Tigon3 [partno(BCM95788A50) rev 3003 PHY(5705)] (PCI:33MHz:32-bit) 10/100/1000Base-T Ethernet 00:0f:b0:c7:36:02
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[1]
>eth0: dma_rwctrl[763f0000] dma_mask[32-bit]
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:02:04.4 [104c:8034] (rev 0)
>ACPI: PCI Interrupt 0000:02:04.4[C] -> GSI 21 (level, low) -> IRQ 21
>mmc0: SDHCI at 0xc401a000 irq 21 DMA
>mmc1: SDHCI at 0xc401b000 irq 21 DMA
>mmc2: SDHCI at 0xc401c000 irq 21 DMA
>ACPI: PCI Interrupt 0000:02:04.3[B] -> GSI 21 (level, low) -> IRQ 21
>ACPI: PCI Interrupt 0000:02:04.2[C] -> GSI 21 (level, low) -> IRQ 21
>fw_ohci: Added fw-ohci device 0000:02:04.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 22
>ssb: Sonics Silicon Backplane found on PCI device <NULL>
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
>ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI core, index 2
>bcm43xx_mac80211: Broadcom 4318 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low) -> IRQ 17
>fw_core: created new fw device fw0 (0 config rom retries)
>MC'97 0 converters and GPIO not ready (0x1)
>floppy0: no floppy controllers found
>loop: loaded (max 8 devices)
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [C177] (on-line)
>ACPI: Battery Slot [C179] (battery present)
>ACPI: Battery Slot [C178] (battery absent)
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [C1F0]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [C1F1]
>ibm_acpi: ec object not found
>ACPI: Video Device [C049] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda6, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sda5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
>Clocksource tsc unstable (delta = -117934417 ns)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>bcm43xx_mac80211: Adding Interface type 2
>bcm43xx_mac80211: Found PHY: Analog 3, Type 2, Revision 7
>bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>ssb: Switching to PCI core, index 2
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Loading firmware version 319.11 (2006-03-15 21:28:24)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned on
>bcm43xx_mac80211: Radio enabled by hardware
>bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=0, tgt=62). Disabling TX power adjustment.
>bcm43xx_mac80211: Chip initialized
>bcm43xx_mac80211: 32-bit DMA initialized
>bcm43xx_mac80211: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:14:bf:a9:08:fd
>eth1: RX authentication from 00:14:bf:a9:08:fd (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:14:bf:a9:08:fd
>eth1: RX AssocResp from 00:14:bf:a9:08:fd (capab=0x471 status=0 aid=1)
>eth1: associated
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth1: no IPv6 routers present
>ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>
>************************************************************
>******** here I took down eth1 and bcm43xx-mac80211 ********
>************************************************************
>
>bcm43xx_mac80211: Removing Interface type 2
>bcm43xx_mac80211: Wireless interface stopped
>bcm43xx_mac80211: DMA-32 0x0200 (RX) max used slots: 1/64
>bcm43xx_mac80211: DMA-32 0x02A0 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0280 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0260 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0240 (TX) max used slots: 0/128
>bcm43xx_mac80211: DMA-32 0x0220 (TX) max used slots: 24/128
>bcm43xx_mac80211: DMA-32 0x0200 (TX) max used slots: 0/128
>bcm43xx_mac80211: Radio turned off
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned off
>ACPI: PCI interrupt for device 0000:02:02.0 disabled
>
>***************************************************************************
>******** here I reloaded bcm43xx-mac80211, and bring up again eth1 ********
>***************************************************************************
>
>ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 22 (level, low) -> IRQ 22
>ssb: Sonics Silicon Backplane found on PCI device <NULL>
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
>ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
>ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to PCI core, index 2
>bcm43xx_mac80211: Broadcom 4318 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>bcm43xx_mac80211: Adding Interface type 2
>bcm43xx_mac80211: Found PHY: Analog 3, Type 2, Revision 7
>bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 8
>ssb: Switching to PCI core, index 2
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Loading firmware version 319.11 (2006-03-15 21:28:24)
>ssb: Switching to ChipCommon core, index 0
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Radio turned on
>bcm43xx_mac80211: Radio enabled by hardware
>bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=0, tgt=62). Disabling TX power adjustment.
>bcm43xx_mac80211: Chip initialized
>bcm43xx_mac80211: 32-bit DMA initialized
>bcm43xx_mac80211: Wireless interface started
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:14:bf:a9:08:fd
>eth1: RX authentication from 00:14:bf:a9:08:fd (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:14:bf:a9:08:fd
>eth1: RX AssocResp from 00:14:bf:a9:08:fd (capab=0x471 status=0 aid=1)
>eth1: associated
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>bcm43xx_mac80211: Using hardware based encryption for keyidx: 0, mac: ff:ff:ff:ff:ff:ff
>eth1: Initial auth_alg=0
>eth1: authenticate with AP 00:14:bf:a9:08:fd
>eth1: RX authentication from 00:14:bf:a9:08:fd (alg=0 transaction=2 status=0)
>eth1: authenticated
>eth1: associate with AP 00:14:bf:a9:08:fd
>eth1: RX ReassocResp from 00:14:bf:a9:08:fd (capab=0x471 status=0 aid=1)
>eth1: associated

Actions: View

Attachments on bug 240343: 154843 | 154845 | 154846 | 154862