Attachment 155026 Details for Bug 236441 – /var/log/messages file

/var/log/messages file

ibm-alishan.log (text/plain), 20.51 KB, created by Jeff Burke on 2007-05-18 19:24:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jeff Burke

Created: 2007-05-18 19:24:09 UTC

Size: 20.51 KB

patch

obsolete

>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009dc00 end: 000000000009dc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009dc00 size: 0000000000002400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000ce000 size: 0000000000032000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001fe10000 end: 000000001ff10000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001ff10000 size: 0000000000007000 end: 000000001ff17000 type: 3
>copy_e820_map() start: 000000001ff17000 size: 0000000000069000 end: 000000001ff80000 type: 4
>copy_e820_map() start: 000000001ff80000 size: 0000000000080000 end: 0000000020000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
> BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000ce000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ff10000 (usable)
> BIOS-e820: 000000001ff10000 - 000000001ff17000 (ACPI data)
> BIOS-e820: 000000001ff17000 - 000000001ff80000 (ACPI NVS)
> BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>found SMP MP-table at 000f6fe0
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130832
>  HighMem    130832 ->   130832
>early_node_map[1] active PFN ranges
>    0:        0 ->   130832
>DMI present.
>Using APIC driver default
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>Nvidia board detected. Ignoring ACPI timer override.
>If you got timer trouble try acpi_use_timer_override
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:3 APIC version 16
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:3 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:c0000000)
>Detected 2394.741 MHz processor.
>Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
>Built 1 zonelists.  Total pages: 129044
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 console=ttyS0,115200
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>KVM guest: WRMSR probe failed.
>Not a KVM para-guest
>WARNING: experimental RCU implementation.
>CPU 0 irqstacks, hard=c0837000 soft=c0817000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour VGA+ 80x25
>num_possible_cpus(): 2
>CPU#0: allocated 2097152 bytes trace buffer.
>CPU#0: allocated 2097152 bytes max-trace buffer.
>CPU#1: allocated 2097152 bytes trace buffer.
>CPU#1: allocated 2097152 bytes max-trace buffer.
>allocated 4194304 bytes out-trace buffer.
>tracer: a total of 12582912 bytes allocated.
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 494236k/523328k available (2272k kernel code, 28576k reserved, 1609k data, 268k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdff10000   ( 511 MB)
>      .init : 0xc07cf000 - 0xc0812000   ( 268 kB)
>      .data : 0xc06383c4 - 0xc07ca8b4   (1609 kB)
>      .text : 0xc0400000 - 0xc06383c4   (2272 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4790.97 BogoMIPS (lpj=2395488)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 0(2) -> Core 0
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: AMD Engineering Sample stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c0838000 soft=c0818000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4788.84 BogoMIPS (lpj=2394420)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU 1(2) -> Core 1
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: AMD Engineering Sample stepping 01
>Total of 2 processors activated (9579.81 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>Brought up 2 CPUs
>migration_cost=521
>Booting paravirtualized kernel on bare hardware
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>PCI: No mmconfig possible on 0:18
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Transparent bridge - 0000:00:09.0
>ACPI: Device [COMA] status [0000000c]: functional but not present; setting present
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19) *0
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19) *0
>ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 16 17 18 19) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LMCI] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [LSI1] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:03: ioport range 0x8000-0x807f could not be reserved
>pnp: 00:03: ioport range 0x8080-0x80ff has been reserved
>pnp: 00:03: ioport range 0x8400-0x847f has been reserved
>pnp: 00:03: ioport range 0x8480-0x84ff has been reserved
>pnp: 00:03: ioport range 0x8800-0x887f has been reserved
>pnp: 00:03: ioport range 0x8880-0x88ff has been reserved
>pnp: 00:03: ioport range 0x1440-0x147f has been reserved
>pnp: 00:03: ioport range 0x1400-0x143f has been reserved
>PCI: Bridge: 0000:00:09.0
>  IO window: 2000-2fff
>  MEM window: d8000000-d80fffff
>  PREFETCH window: d0000000-d7ffffff
>PCI: Bridge: 0000:00:0b.0
>  IO window: disabled.
>  MEM window: d8100000-d81fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 655360 bytes)
>TCP bind hash table entries: 8192 (order: 6, 294912 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2291k freed
>Simple Boot Flag at 0x39 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS not found.
>Initializing RT-Tester: OK
>audit: initializing netlink socket (disabled)
>audit(1176483275.999:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Found disabled HT MSI Mapping on 0000:00:0b.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Linking AER extended capability on 0000:00:0b.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0d.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Linking AER extended capability on 0000:00:0d.0
>PCI: Found disabled HT MSI Mapping on 0000:00:0e.0
>PCI: Found enabled HT MSI Mapping on 0000:00:00.0
>PCI: Linking AER extended capability on 0000:00:0e.0
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>assign_interrupt_mode Found MSI capability
>aer: probe of 0000:00:0b.0:pcie01 failed with error 2
>aer: probe of 0000:00:0d.0:pcie01 failed with error 2
>aer: probe of 0000:00:0e.0:pcie01 failed with error 2
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-CK804: IDE controller at PCI slot 0000:00:06.0
>NFORCE-CK804: chipset revision 242
>NFORCE-CK804: not 100% native mode: will probe irqs later
>NFORCE-CK804: BIOS didn't set cable bits correctly. Enabling workaround.
>NFORCE-CK804: 0000:00:06.0 (rev f2) UDMA133 controller
>    ide0: BM-DMA at 0x14a0-0x14a7, BIOS settings: hda:DMA, hdb:pio
>hda: TSSTcorp CD-ROM TS-H192C, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>nf_conntrack version 0.5.0 (4088 buckets, 32704 max)
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Engineering Sample processors (version 2.00.00)
>powernow-k8:    0 : fid 0x10 (2400 MHz), vid 0x8
>powernow-k8:    1 : fid 0xe (2200 MHz), vid 0xa
>powernow-k8:    2 : fid 0xc (2000 MHz), vid 0xc
>powernow-k8:    3 : fid 0xa (1800 MHz), vid 0xe
>powernow-k8:    4 : fid 0x2 (1000 MHz), vid 0x12
>Using IPI No-Shortcut mode
>ACPI: (supports<6>Time: acpi_pm clocksource has been installed.
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
> S0 S4 S5)
>Freeing unused kernel memory: 268k freed
>Write protecting the kernel read-only data: 1257k
>Red Hat nash version 5.1.19.6 starting
>Mounting proc filesystem
>Mounting sysfs filesystem
>Creating /dev
>CreaUSB Universal Host Controller Interface driver v3.0
>ting initial device nodes
>SettiACPI: PCI Interrupt Link [LUS0] enabled at IRQ 23
>ng up hotplug.
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> Creating block dGSI 23 (level, high) -> IRQ 16
>evice nodes.
>Loohci_hcd 0000:00:02.0: OHCI Host Controller
>ading uhci-hcd.kohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>o module
>Loadinohci_hcd 0000:00:02.0: irq 16, io mem 0xd8400000
>g ohci-hcd.ko module
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>Loading ehci-hcdACPI: PCI Interrupt Link [LUS2] enabled at IRQ 22
>.ko module
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 22 (level, high) -> IRQ 17
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>ehci_hcd 0000:00:02.1: irq 17, io mem 0xd8403000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>Loading jbd.ko module
>Loading ext3.ko module
>Loading scsi_mod.ko module
>SCSI subsystem initialized
>Loading sd_mod.ko module
>Loading libata.ko module
>Loading sata_nv.ko module
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 21 (level, high) -> IRQ 18
>sata_nv 0000:00:07.0: Using ADMA mode
>ata1: SATA max UDMA/133 cmd 0xE0820480 ctl 0xE08204A0 bmdma 0x14B0 irq 18
>ata2: SATA max UDMA/133 cmd 0xE0820580 ctl 0xE08205A0 bmdma 0x14B8 irq 18
>scsi0 : sata_nv
>ata1: SATA link down (SStatus 0 SControl 300)
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>PCI: Enabling device 0000:00:08.0 (0005 -> 0007)
>ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LSI1] -> GSI 20 (level, high) -> IRQ 19
>sata_nv 0000:00:08.0: Using ADMA mode
>ata3: SATA max UDMA/133 cmd 0xE0832480 ctl 0xE08324A0 bmdma 0x14C0 irq 19
>ata4: SATA max UDMA/133 cmd 0xE0832580 ctl 0xE08325A0 bmdma 0x14C8 irq 19
>scsi2 : sata_nv
>usb 1-2: new low speed USB device using ohci_hcd and address 2
>ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata3.00: ATA-7, max UDMA/133, 156312576 sectors: LBA48 NCQ (depth 31/32)
>ata3.00: ata3: dev 0 multi count 16
>ata3.00: configured for UDMA/133
>scsi3 : sata_nv
>usb 1-2: configuration #1 chosen from 1 choice
>ata4: SATA link down (SStatus 0 SControl 300)
>scsi 2:0:0:0: Direct-Access     ATA      HDS728080PLA380  PF2O PQ: 0 ANSI: 5
>ata3: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
>input: Avocent Avocent USBIAC as /class/input/input0
>input: USB HID v1.10 Keyboard [Avocent Avocent USBIAC] on usb-0000:00:02.0-2
>input: Avocent Avocent USBIAC as /class/input/input1
>input: USB HID v1.10 Mouse [Avocent Avocent USBIAC] on usb-0000:00:02.0-2
>SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
>sda: Write Protect is off
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: Attached scsi disk sda
>Loading ata_generic.ko module
>Loading dm-mod.kodevice-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
> module
>Loading dm-mirror.ko module
>Loading dm-zero.ko module
>Loading dm-snapshot.ko module
>Waiting for driver initialization.
>Making device-mapper control node
>Scanning logical volumes
>  Reading all physical volumes.  This may take a while...
>  Found volume group "VolGroup00" using metadata type lvm2
>Activating logical volumes
>  2 logical volume(s) in volume group "VolGroup00" now active
>Trying to resume from /dev/VolGroup00/LogVol01
>No suspend signature on swap, not resuming.
>Creating root device.
>Mounting root filesystem.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>Setting up other filesystems.
>Setting up new root fs
>no fstab.sys, mounting internal defaults
>Switching to new root and running init.
>unmounting old /dev
>unmounting old /proc
>unmounting old /sys
>audit(1176483300.208:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1605 types, 175 bools, 1 sens, 1024 cats
>security:  59 classes, 50507 rules
>security:  class dccp_socket not defined in policy
>security:  permission dccp_recv in class node not defined in policy
>security:  permission dccp_send in class node not defined in policy
>security:  permission dccp_recv in class netif not defined in policy
>security:  permission dccp_send in class netif not defined in policy
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1176483300.208:3): policy loaded auid=4294967295
>INIT: version 2.86 booting
>		Welcome to Red Hat Enterprise Linux Server
>		Press 'I' to enter interactive startup.
>Setting clock  (utc): Fri Apr 13 12:55:04 EDT 2007 [  OK  ]
>Starting udev: [  OK  ]
>Loading default keymap (us): [  OK  ]
>Setting hostname ibm-alishan.rhts.boston.redhat.com:  [  OK  ]
>Setting up Logical Volume Management:   2 logical volume(s) in volume group "VolGroup00" now active
>[  OK  ]
>Checking filesystems
>Checking all file systems.
>[/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 
>/dev/VolGroup00/LogVol00: clean, 68482/19248768 files, 991805/19243008 blocks
>[/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 
>/boot: clean, 37/26104 files, 19682/104388 blocks
>[  OK  ]
>Remounting root filesystem in read-write mode:  [  OK  ]
>Mounting local filesystems:  [  OK  ]
>Enabling local filesystem quotas:  [  OK  ]
>Enabling /etc/fstab swaps:  [  OK  ]
>INIT: Entering runlevel: 3
><Apr/13 12:56 pm>Entering non-interactive startup
>Starting background readahead: [  OK  ]
>Checking for hardware changes [  OK  ]
>Enabling ondemand cpu frequency scaling: [  OK  ]
>Bringing up loopback interface:  [  OK  ]
>Bringing up interface eth0:  
>Determining IP information for eth0... done.
>[  OK  ]
>Starting restorecond: [  OK  ]
>Starting auditd: [  OK  ]
>Starting system logger: [  OK  ]
>Starting kernel logger: [  OK  ]
>Starting irqbalance: [  OK  ]
>Starting mcstransd: [  OK  ]
>Starting portmap: [  OK  ]
>Starting NFS statd: [  OK  ]
>Starting RPC idmapd: [  OK  ]
>Starting system message bus: [  OK  ]
>Starting Bluetooth services:[  OK  ][  OK  ]
>Mounting other filesystems:  [  OK  ]
>Starting PC/SC smart card daemon (pcscd): [  OK  ]
>Starting hidd: [  OK  ]
>Starting autofs:  Loading autofs4: [  OK  ]
>Starting automount: [  OK  ]
>[  OK  ]
>Starting acpi daemon: [  OK  ]
>Starting cups: [  OK  ]
>Generating SSH1 RSA host key: [  OK  ]
>Generating SSH2 RSA host key: [  OK  ]
>Generating SSH2 DSA host key: [  OK  ]
>Starting sshd: [  OK  ]
>Starting ntpd: [  OK  ]
>Starting sendmail: [  OK  ]
>Starting sm-client: [  OK  ]
>Starting console mouse services: [  OK  ]
>Starting crond: [  OK  ]
>Starting xfs: [  OK  ]
>Starting anacron: [  OK  ]
>Starting atd: [  OK  ]
>Starting yum-updatesd: [  OK  ]
>Starting Avahi daemon... [  OK  ]
>Starting HAL daemon: [  OK  ]

Actions: View

Attachments on bug 236441: 155026