Attachment 155042 Details for Bug 240339 – dmesg (cold start) and lspci -vvv output from ThinkPad R50, comment #5

dmesg (cold start) and lspci -vvv output from ThinkPad R50, comment #5

dmesg_lspci_ibm_thinkpad_r50.txt (text/plain), 29.31 KB, created by Mikko Huhtala on 2007-05-19 07:02:43 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Mikko Huhtala

Created: 2007-05-19 07:02:43 UTC

Size: 29.31 KB

patch

obsolete

>Linux version 2.6.21-1.3163.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Tue May 15 17:23:21 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f000 end: 000000000009f000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f000 size: 0000000000001000 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003fe60000 end: 000000003ff60000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003ff60000 size: 0000000000018000 end: 000000003ff78000 type: 3
>copy_e820_map() start: 000000003ff78000 size: 0000000000002000 end: 000000003ff7a000 type: 4
>copy_e820_map() start: 000000003ff80000 size: 0000000000080000 end: 0000000040000000 type: 2
>copy_e820_map() start: 00000000ff800000 size: 0000000000800000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003ff60000 (usable)
> BIOS-e820: 000000003ff60000 - 000000003ff78000 (ACPI data)
> BIOS-e820: 000000003ff78000 - 000000003ff7a000 (ACPI NVS)
> BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
> BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 261984) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   261984
>early_node_map[1] active PFN ranges
>    0:        0 ->   261984
>On node 0 totalpages: 261984
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 318 pages used for memmap
>  HighMem zone: 32290 pages, LIFO batch:7
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6B40, 0024 (r2 IBM   )
>ACPI: XSDT 3FF6C263, 004C (r1 IBM    TP-1R        2140  LTP        0)
>ACPI: FACP 3FF6C300, 00F4 (r3 IBM    TP-1R        2140 IBM         1)
>ACPI Warning (tbfadt-0434): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126]
>ACPI: DSDT 3FF6C4E7, B93F (r1 IBM    TP-1R        2140 MSFT  100000E)
>ACPI: FACS 3FF79000, 0040
>ACPI: SSDT 3FF6C4B4, 0033 (r1 IBM    TP-1R        2140 MSFT  100000E)
>ACPI: ECDT 3FF77E26, 0052 (r1 IBM    TP-1R        2140 IBM         1)
>ACPI: TCPA 3FF77E78, 0032 (r1 IBM    TP-1R        2140 PTL         1)
>ACPI: BOOT 3FF77FD8, 0028 (r1 IBM    TP-1R        2140  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>Allocating PCI resources starting at 50000000 (gap: 40000000:bf800000)
>Built 1 zonelists.  Total pages: 259426
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (01a10000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0782000 soft=c0762000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 599.506 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1028320k/1047936k available (2079k kernel code, 18856k reserved, 1103k data, 240k init, 130432k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc0721000 - 0xc075d000   ( 240 kB)
>      .data : 0xc0607d77 - 0xc071bcb4   (1103 kB)
>      .text : 0xc0400000 - 0xc0607d77   (2079 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1204.82 BogoMIPS (lpj=602414)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: a7e9f1bf 00000000 00000000 00002040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0800)
>CPU0: Intel(R) Pentium(R) M processor 1500MHz stepping 05
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>Time:  6:07:57  Date: 04/19/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
>ACPI: Power Resource [PUBS] (on)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved
>pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved
>pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: 3000-3fff
>  MEM window: c0100000-c01fffff
>  PREFETCH window: e0000000-e7ffffff
>PCI: Bus 3, cardbus bridge: 0000:02:00.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: e8000000-ebffffff
>  MEM window: c4000000-c7ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-8fff
>  MEM window: c0200000-cfffffff
>  PREFETCH window: e8000000-efffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs...<6>Switched to high resolution mode on CPU 0
> it is
>Freeing initrd memory: 3453k freed
>Simple Boot Flag at 0x35 set to 0x1
>IBM machine detected. Enabling interrupts during APM calls.
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1179554878.168:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 76220962C9FB0600
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3] C4[C3])
>ACPI: Processor [CPU] (supports 8 throttling states)
>ACPI: Thermal Zone [THM0] (25 C)
>isapnp: Scanning for PnP cards...
>Time: acpi_pm clocksource has been installed.
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 855PM Chipset.
>agpgart: AGP aperture is 256M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>pnp: Device 00:09 activated.
>00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552]
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64
>Yenta: ISA IRQ mask 0x04f8, PCI irq 11
>Socket status: 30000086
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff
>cs: IO port probe 0x4000-0x8fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff
>pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:120:115
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 825k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>IBM TrackPoint firmware: 0x0e, buttons: 3/3
>input: TPPS/2 IBM TrackPoint as /class/input/input2
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-6: ST98823A, 3.04, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      ST98823A         3.04 PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            TEAC     DW-225           2.2A PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1179554886.317:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:89:39:d0
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
>ipw2100: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>pnp: Device 00:0a activated.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
>NET: Registered protocol family 23
>pnp: Device 00:0b activated.
>nsc-ircc, chip->init
>nsc-ircc, Found chip at base=0x02e
>nsc-ircc, driver loaded (Dag Brattli)
>IrDA: Registered device irda0
>nsc-ircc, Found dongle: HP HSDL-1100/HSDL-2100
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 50306 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>fw_ohci: Added fw-ohci device 0000:02:00.2, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>fw_core: created new fw device fw0 (0 config rom retries)
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>Clocksource tsc unstable (delta = -498241532 ns)
>ACPI: AC Adapter [AC] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: ACPI Dock Station Driver 
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: IBM ThinkPad ACPI Extras v0.13
>ibm_acpi: http://ibm-acpi.sf.net/
>ibm_acpi: another device driver is already handling bay events
>ibm_acpi: disabling subdriver bay
>ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>usb 2-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft Wheel Mouse Optical® as /class/input/input6
>input: USB HID v1.00 Mouse [Microsoft Microsoft Wheel Mouse Optical®] on usb-0000:00:1d.1-1
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 2 usecs
>ipw2100: exit - failed to send CARD_DISABLE command
>-----------------------------------------------------
>00:00.0 Host bridge: Intel Corporation 82855PM Processor to I/O Controller (rev 03)
>	Subsystem: IBM Thinkpad T41
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 0
>	Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
>	Capabilities: <access denied>
>
>00:01.0 PCI bridge: Intel Corporation 82855PM Processor to AGP Controller (rev 03) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 96
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
>	I/O behind bridge: 00003000-00003fff
>	Memory behind bridge: c0100000-c01fffff
>	Prefetchable memory behind bridge: e0000000-e7ffffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>
>00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 4: I/O ports at 1800 [size=32]
>
>00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 1820 [size=32]
>
>00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 01) (prog-if 00 [UHCI])
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin C routed to IRQ 11
>	Region 4: I/O ports at 1840 [size=32]
>
>00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 01) (prog-if 20 [EHCI])
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin D routed to IRQ 11
>	Region 0: Memory at c0000000 (32-bit, non-prefetchable) [size=1K]
>	Capabilities: <access denied>
>
>00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 81) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=08, sec-latency=64
>	I/O behind bridge: 00004000-00008fff
>	Memory behind bridge: c0200000-cfffffff
>	Prefetchable memory behind bridge: e8000000-efffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>
>00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface Bridge (rev 01)
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE Controller (rev 01) (prog-if 8a [Master SecP PriP])
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 11
>	Region 0: I/O ports at 01f0 [size=8]
>	Region 1: I/O ports at 03f4 [size=1]
>	Region 2: I/O ports at 0170 [size=8]
>	Region 3: I/O ports at 0374 [size=1]
>	Region 4: I/O ports at 1860 [size=16]
>	Region 5: Memory at 50000000 (32-bit, non-prefetchable) [size=1K]
>
>00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 01)
>	Subsystem: IBM Thinkpad R50e model 1634
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin B routed to IRQ 11
>	Region 4: I/O ports at 1880 [size=32]
>
>00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01)
>	Subsystem: IBM Unknown device 0554
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 1c00 [size=256]
>	Region 1: I/O ports at 18c0 [size=64]
>	Region 2: Memory at c0000c00 (32-bit, non-prefetchable) [size=512]
>	Region 3: Memory at c0000800 (32-bit, non-prefetchable) [size=256]
>	Capabilities: <access denied>
>
>00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller (rev 01) (prog-if 00 [Generic])
>	Subsystem: IBM Unknown device 0525
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin B routed to IRQ 11
>	Region 0: I/O ports at 2400 [size=256]
>	Region 1: I/O ports at 2000 [size=128]
>	Capabilities: <access denied>
>
>01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 [Mobility FireGL 9000] (rev 02) (prog-if 00 [VGA])
>	Subsystem: IBM Unknown device 0531
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B+
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 66 (2000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at e0000000 (32-bit, prefetchable) [size=128M]
>	Region 1: I/O ports at 3000 [size=256]
>	Region 2: Memory at c0100000 (32-bit, non-prefetchable) [size=64K]
>	[virtual] Expansion ROM at c0120000 [disabled] [size=128K]
>	Capabilities: <access denied>
>
>02:00.0 CardBus bridge: Texas Instruments PCI4520 PC card Cardbus Controller (rev 01)
>	Subsystem: IBM Unknown device 0552
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 168, Cache Line Size: 128 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at b0000000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
>	Memory window 0: e8000000-ebfff000 (prefetchable)
>	Memory window 1: c4000000-c7fff000
>	I/O window 0: 00004000-000040ff
>	I/O window 1: 00004400-000044ff
>	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset+ 16bInt+ PostWrite+
>	16-bit legacy interface ports at 0001
>
>02:00.2 FireWire (IEEE 1394): Texas Instruments Unknown device 802a (rev 01) (prog-if 10 [OHCI])
>	Subsystem: IBM Unknown device 0553
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin C routed to IRQ 11
>	Region 0: Memory at c0215000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at c0210000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: <access denied>
>
>02:01.0 Ethernet controller: Intel Corporation 82540EP Gigabit Ethernet Controller (Mobile) (rev 03)
>	Subsystem: IBM PRO/1000 MT Mobile Connection
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (63750ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at c0220000 (32-bit, non-prefetchable) [size=128K]
>	Region 1: Memory at c0200000 (32-bit, non-prefetchable) [size=64K]
>	Region 2: I/O ports at 8000 [size=64]
>	[virtual] Expansion ROM at ec000000 [disabled] [size=64K]
>	Capabilities: <access denied>
>
>02:02.0 Network controller: Intel Corporation PRO/Wireless LAN 2100 3B Mini PCI Adapter (rev 04)
>	Subsystem: Intel Corporation Unknown device 2551
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 64 (500ns min, 8500ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 11
>	Region 0: Memory at c0214000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: <access denied>
>

Actions: View

Attachments on bug 240339: 154839 | 155030 | 155042