Attachment 155075 Details for Bug 233937 – domain0 dmesg output

domain0 dmesg output

domain0.txt (text/plain), 25.93 KB, created by Jan ONDREJ on 2007-05-21 07:43:14 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Jan ONDREJ

Created: 2007-05-21 07:43:14 UTC

Size: 25.93 KB

patch

obsolete

>Linux version 2.6.20-1.2948.fc6xen (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 20:07:53 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize bail 0
>copy_e820_map() start: 0000000000000000 size: 0000000076f91000 end: 0000000076f91000 type: 1
> Xen: 0000000000000000 - 0000000076f91000 (usable)
>1175MB HIGHMEM available.
>727MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 487313) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->   186366
>  Normal     186366 ->   186366
>  HighMem    186366 ->   487313
>early_node_map[1] active PFN ranges
>    0:        0 ->   487313
>On node 0 totalpages: 487313
>  DMA zone: 1455 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 184911 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 2351 pages used for memmap
>  HighMem zone: 298596 pages, LIFO batch:31
>found SMP MP-table at 000f4d70
>DMI 2.3 present.
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f6930
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3000
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff3040
>ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x7fff7280
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Built 1 zonelists.  Total pages: 483507
>Kernel command line: ro root=/dev/md0
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0784000 soft=c0764000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Xen reported: 2411.592 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Software IO TLB enabled: 
> Aperture:     2 megabytes
> Kernel range: 0x00000000c0d85000 - 0x00000000c0f85000
>vmalloc area: ee000000-f4ffe000, maxmem 2d7fe000
>Memory: 1910384k/1949252k available (2134k kernel code, 29500k reserved, 1127k data, 176k init, 1203788k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xf5315000 - 0xf57fe000   (5028 kB)
>    pkmap   : 0xf5000000 - 0xf5200000   (2048 kB)
>    vmalloc : 0xee000000 - 0xf4ffe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xed7fe000   ( 727 MB)
>      .init : 0xc0734000 - 0xc0760000   ( 176 kB)
>      .data : 0xc0615a06 - 0xc072f794   (1127 kB)
>      .text : 0xc0400000 - 0xc0615a06   (2134 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6033.58 BogoMIPS (lpj=12067178)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 3febd3f1 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: After all inits, caps: 3febd3f1 00000000 00000000 00003080 00000000 00000000 00000000
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 11k freed
>ACPI: Core revision 20060707
>ENABLING IO-APIC IRQs
>Brought up 1 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 4000-407f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 4080-40bf claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from BC00 to 01F0
>0000:00:1f.1: trying to change BAR1 from C000 to 03F4
>0000:00:1f.1: trying to change BAR2 from C400 to 0170
>0000:00:1f.1: trying to change BAR3 from C800 to 0374
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: da000000-dbffffff
>  PREFETCH window: d8000000-d9ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 9000-afff
>  MEM window: dc000000-dc0fffff
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3677k freed
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1179317910.784:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 41B40C132A183A53
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: AGP aperture is 128M @ 0xd0000000
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 16
>ICH4: chipset revision 1
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xcc00-0xcc07, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD2500SB-01RFA0, ATA DISK drive
>hdb: HL-DT-ST DVDRAM GSA-H42N, ATAPI CD/DVD-ROM drive
>hda: hw_config=603b
>hda: hw_config=603b
>hdb: hw_config=6f00
>hdb: hw_config=6f00
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: WDC WD2500SB-01RFA0, ATA DISK drive
>hdc: hw_config=600d
>hdc: hw_config=600d
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 490234752 sectors (251000 MB) w/8192KiB Cache, CHS=30515/255/63<6>hda: hw_config=603b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4 < hda5 >
>hdc: max request size: 512KiB
>hdc: 490234752 sectors (251000 MB) w/8192KiB Cache, CHS=30515/255/63<6>hdc: hw_config=600d
>, UDMA(100)
>hdc: cache flushes supported
> hdc: hdc1 hdc2 hdc3 hdc4 < hdc5 >
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Freeing unused kernel memory: 176k freed
>Write protecting the kernel read-only data: 797k
>firmware_class: attempt to set timeout to 10
>logips2pp: Detected unknown logitech mouse model 0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x0000b800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x0000b000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 16, io base 0x0000b400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>input: ImPS/2 Logitech Wheel Mouse as /class/input/input2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc100000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  2376.000 MB/sec
>raid5: using function: pIII_sse (2376.000 MB/sec)
>raid6: int32x1    716 MB/s
>raid6: int32x2    848 MB/s
>raid6: int32x4    814 MB/s
>raid6: int32x8    727 MB/s
>raid6: mmxx1     1908 MB/s
>raid6: mmxx2     2072 MB/s
>raid6: sse1x1    1027 MB/s
>raid6: sse1x2    1922 MB/s
>raid6: sse2x1    1987 MB/s
>raid6: sse2x2    2416 MB/s
>raid6: using algorithm sse2x2 (2416 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering hdc5 ...
>md:  adding hdc5 ...
>md: hdc3 has different UUID to hdc5
>md: hdc1 has different UUID to hdc5
>md:  adding hda5 ...
>md: hda3 has different UUID to hdc5
>md: hda1 has different UUID to hdc5
>md: created md2
>md: bind<hda5>
>md: bind<hdc5>
>md: running: <hdc5><hda5>
>md: md2: raid array is not clean -- starting background reconstruction
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering hdc3 ...
>md: resync of RAID array md2
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 234629184 blocks.
>md:  adding hdc3 ...
>md: hdc1 has different UUID to hdc3
>md:  adding hda3 ...
>md: hda1 has different UUID to hdc3
>md: created md1
>md: bind<hda3>
>md: bind<hdc3>
>md: running: <hdc3><hda3>
>md: md1: raid array is not clean -- starting background reconstruction
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering hdc1 ...
>md: delaying resync of md1 until md2 has finished (they share one or more physical units)
>md:  adding hdc1 ...
>md:  adding hda1 ...
>md: created md0
>md: bind<hda1>
>md: bind<hdc1>
>md: running: <hdc1><hda1>
>md: md0: raid array is not clean -- starting background reconstruction
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>md: delaying resync of md0 until md2 has finished (they share one or more physical units)
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1630 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51372 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1179317918.788:2): policy loaded auid=4294967295
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:02:08.0[A] -> GSI 20 (level, low) -> IRQ 20
>e100: eth0: e100_probe: addr 0xdc004000, irq 20, MAC addr 00:20:ED:40:D6:5F
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>ieee1394: Initialized config rom entry `ip1394'
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:02:07.0[A] -> GSI 16 (level, low) -> IRQ 17
>ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[17]  MMIO=[dc005000-dc0057ff]  Max Packet=[2048]  IR/IT contexts=[8/8]
>input: PC Speaker as /class/input/input3
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x4060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 21
>intel_rng: FWH not detected
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[000020ed0038dc3f]
>hdb: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<6>hdb: hw_config=6f00
>, UDMA(66)
>Uniform CD-ROM driver Revision: 3.20
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>audit(1179317943.775:3): avc:  denied  { getattr } for  pid=1344 comm="fsck" name=".in_sysinit" dev=tmpfs ino=1412 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:device_t:s0 tclass=file
>EXT3 FS on md0, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md1, type ext3), uses xattr
>Adding 2096472k swap on /dev/hdc2.  Priority:-1 extents:1 across:2096472k
>audit(1179317945.155:4): avc:  denied  { read } for  pid=1397 comm="swapon" name="/" dev=tmpfs ino=5949 scontext=system_u:system_r:fsadm_t:s0 tcontext=system_u:object_r:tmpfs_t:s0 tclass=dir
>Adding 2096472k swap on /dev/hda2.  Priority:-2 extents:1 across:2096472k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>Bridge firewalling registered
>device vif0.0 entered promiscuous mode
>audit(1179317975.709:5): dev=vif0.0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 1(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>ADDRCONF(NETDEV_UP): peth0: link is not ready
>e100: peth0: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_CHANGE): peth0: link becomes ready
>device peth0 entered promiscuous mode
>audit(1179317976.849:6): dev=peth0 prom=256 old_prom=0 auid=4294967295
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>device vif1.0 entered promiscuous mode
>audit(1179317983.249:7): dev=vif1.0 prom=256 old_prom=0 auid=4294967295
>ADDRCONF(NETDEV_UP): vif1.0: link is not ready
>eth0: no IPv6 routers present
>ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
>xenbr0: port 3(vif1.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif1.0) entering forwarding state
>md: md2: resync done.
>md: resync of RAID array md0
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 4192832 blocks.
>md: delaying resync of md1 until md0 has finished (they share one or more physical units)
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:hda5
> disk 1, wo:0, o:1, dev:hdc5
>md: md0: resync done.
>md: resync of RAID array md1
>md: minimum _guaranteed_  speed: 1000 KB/sec/disk.
>md: using maximum available idle IO bandwidth (but not more than 200000 KB/sec) for resync.
>md: using 128k window, over a total of 4192896 blocks.
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:hda1
> disk 1, wo:0, o:1, dev:hdc1
>md: md1: resync done.
>RAID1 conf printout:
> --- wd:2 rd:2
> disk 0, wo:0, o:1, dev:hda3
> disk 1, wo:0, o:1, dev:hdc3
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>printk: 4244 messages suppressed.
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>printk: 3971 messages suppressed.
>4gb seg fixup, process prelink (pid 12555), cs:ip 73:08084338
>iret exception: 0000 [#1]
>SMP 
>last sysfs file: /class/misc/evtchn/dev
>Modules linked in: xt_physdev bridge netloop netbk blktap blkbk ip6t_REJECT ip6table_filter ip6_tables ipv6 nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables video sbs i2c_ec dock button battery asus_acpi backlight ac parport_pc lp parport floppy i2c_i801 iTCO_wdt pcspkr ohci1394 iTCO_vendor_support i2c_core ieee1394 ide_cd cdrom serial_core e100 serio_raw mii dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata sd_mod scsi_mod raid456 xor raid1 ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    0
>EIP:    9f34:[<00049f33>]    Not tainted VLI
>EFLAGS: 00049f35   (2.6.20-1.2948.fc6xen #1)
>EIP is at 0x49f33
>eax: 00000000   ebx: 006e4402   ecx: 00000073   edx: 00000286
>esi: bf89281c   edi: 0000007b   ebp: 00000000   esp: ec64c01c
>ds: 0000   es: 0000   ss: 0069
>Process crond (pid: 3730, ti=ec64b000 task=c0bbcdb0 task.ti=ec64b000)
>Stack: 00049f36 00049f37 00049f38 00049f39 00049f3a 00049f3b 00049f3c 00049f3d 
>       00049f3e 00049f3f 00049f40 00049f41 00049f42 00049f43 00049f44 00049f45 
>       00049f46 00049f47 00049f48 00049f49 00049f4a 00049f4b 00049f4c 00049f4d 
>Call Trace:
>BUG: unable to handle kernel paging request at virtual address 00049f3c
> printing eip:
>c04055c2
>2b32d000 -> *pde = 00000000:555fa001
>2b7fa000 -> *pme = 00000000:54945067
>2c345000 -> *pte = 00000000:00000000
>Oops: 0000 [#2]
>SMP 
>last sysfs file: /class/misc/evtchn/dev
>Modules linked in: xt_physdev bridge netloop netbk blktap blkbk ip6t_REJECT ip6table_filter ip6_tables ipv6 nf_conntrack_netbios_ns ipt_REJECT nf_conntrack_ipv4 xt_state nf_conntrack nfnetlink xt_tcpudp iptable_filter ip_tables x_tables video sbs i2c_ec dock button battery asus_acpi backlight ac parport_pc lp parport floppy i2c_i801 iTCO_wdt pcspkr ohci1394 iTCO_vendor_support i2c_core ieee1394 ide_cd cdrom serial_core e100 serio_raw mii dm_snapshot dm_zero dm_mirror dm_mod ata_piix libata sd_mod scsi_mod raid456 xor raid1 ext3 jbd ehci_hcd ohci_hcd uhci_hcd
>CPU:    0
>EIP:    0061:[<c04055c2>]    Not tainted VLI
>EFLAGS: 00010097   (2.6.20-1.2948.fc6xen #1)
>EIP is at dump_trace+0x5c/0x93
>eax: 00049ffd   ebx: 00049f3c   ecx: 04e5599f   edx: 01795400
>esi: 00000000   edi: 00049000   ebp: c0693e66   esp: ec64be7c
>ds: 007b   es: 007b   ss: 0069
>Process crond (pid: 3730, ti=ec64b000 task=c0bbcdb0 task.ti=ec64b000)
>Stack: c0693d26 c0693e66 00000018 00000000 c0693e66 c0405611 c06e44e0 c0693e66 
>       ec64c07f c04056c0 c0693e66 c0693e66 ec64bfe4 ec64c01c 00000002 00049f35 
>       ec64bfe4 ec64c01c c0405856 c0693e66 00000010 c0bbcf44 00000e92 ec64b000 
>Call Trace:
> [<c0405611>] show_trace_log_lvl+0x18/0x2c
> [<c04056c0>] show_stack_log_lvl+0x9b/0xa3
> [<c0405856>] show_registers+0x18e/0x25d
> [<c0613bb5>] notifier_call_chain+0x19/0x29
> [<c0405a58>] die+0x133/0x22f
> [<c0406302>] do_iret_error+0xa7/0xb1
> [<c04e1760>] copy_to_user+0x3c/0x50
> [<c040500c>] scrit+0xc/0x1a
> [<c040500d>] scrit+0xd/0x1a
> [<c040500e>] scrit+0xe/0x1a
> [<c0405013>] scrit+0x13/0x1a
> [<c042beaf>] search_exception_tables+0x14/0x25
> [<c041444f>] fixup_exception+0xb/0x20
> [<c06122f5>] do_general_protection+0x11c/0x16f
> [<c040687b>] do_IRQ+0xc6/0xdb
> [<c06121d9>] do_general_protection+0x0/0x16f
> [<c040625b>] do_iret_error+0x0/0xb1
> [<c0611ddd>] error_code+0x35/0x3c
> =======================
>Code: 9a d4 01 00 00 89 df 81 e7 00 f0 ff ff eb 0e 8b 4c 24 18 89 f2 89 e8 ff 51 08 83 c3 04 39 fb 76 29 8d 87 fd 0f 00 00 39 c3 73 1f <8b> 33 89 f0 e8 ad 68 02 00 85 c0 74 e2 eb d5 8b 4f 34 85 c9 74 
>EIP: [<c04055c2>] dump_trace+0x5c/0x93 SS:ESP 0069:ec64be7c
> <3>BUG: sleeping function called from invalid context at kernel/rwsem.c:20
>in_atomic():0, irqs_disabled():1
> [<c04303e6>] down_read+0x12/0x28
> [<c0438a56>] acct_collect+0x38/0x13e
> [<c041fc77>] do_exit+0x1b1/0x6f6
> [<c0405b2f>] die+0x20a/0x22f
> [<c0613a1f>] do_page_fault+0xab1/0xc2e
> [<c054b47c>] kcons_write_dom0+0x0/0x26
> [<c0611caf>] _spin_unlock_irqrestore+0x8/0x16
> [<c041d675>] release_console_sem+0x192/0x1d1
> [<c041dce6>] vprintk+0x2de/0x2e8
> [<c0612f6e>] do_page_fault+0x0/0xc2e
> [<c0611ddd>] error_code+0x35/0x3c
> [<c04100d8>] IO_APIC_get_PCI_irq_vector+0x2f/0x10d
> [<c04055c2>] dump_trace+0x5c/0x93
> [<c0405611>] show_trace_log_lvl+0x18/0x2c
> [<c04056c0>] show_stack_log_lvl+0x9b/0xa3
> [<c0405856>] show_registers+0x18e/0x25d
> [<c0613bb5>] notifier_call_chain+0x19/0x29
> [<c0405a58>] die+0x133/0x22f
> [<c0406302>] do_iret_error+0xa7/0xb1
> [<c04e1760>] copy_to_user+0x3c/0x50
> [<c040500c>] scrit+0xc/0x1a
> [<c040500d>] scrit+0xd/0x1a
> [<c040500e>] scrit+0xe/0x1a
> [<c0405013>] scrit+0x13/0x1a
> [<c042beaf>] search_exception_tables+0x14/0x25
> [<c041444f>] fixup_exception+0xb/0x20
> [<c06122f5>] do_general_protection+0x11c/0x16f
> [<c040687b>] do_IRQ+0xc6/0xdb
> [<c06121d9>] do_general_protection+0x0/0x16f
> [<c040625b>] do_iret_error+0x0/0xb1
> [<c0611ddd>] error_code+0x35/0x3c
> =======================

Actions: View

Attachments on bug 233937: 155074 | 155075 | 155076