Attachment 155459 Details for Bug 241373 – dmesg output

dmesg output

dmesg.log (text/plain), 24.30 KB, created by Zing on 2007-05-25 15:11:29 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Zing

Created: 2007-05-25 15:11:29 UTC

Size: 24.30 KB

patch

obsolete

>Linux version 2.6.20-1.2948.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 19:18:54 EDT 2007
>Command line: ro root=LABEL=/ crashkernel=128M@16M
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009d400 (usable)
> BIOS-e820: 000000000009d400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000d7fb0580 (usable)
> BIOS-e820: 00000000d7fb0580 - 00000000d7fd0000 (ACPI data)
> BIOS-e820: 00000000d7fd0000 - 00000000d8000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 00000001a8000000 (usable)
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 884656) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1736704) 2 entries of 3200 used
>end_pfn_map = 1736704
>DMI 2.3 present.
>ACPI: RSDP (v000 IBM                                   ) @ 0x00000000000fdfc0
>ACPI: RSDT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x00000000d7fcff80
>ACPI: FADT (v002 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x00000000d7fcfec0
>ACPI: MADT (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x00000000d7fcfdc0
>ACPI: MCFG (v001 IBM    SERBLADE 0x00001000 IBM  0x45444f43) @ 0x00000000d7fcfd80
>ACPI: SSDT (v001 IBM    HARPO    0x00001000 INTL 0x02002025) @ 0x00000000d7fc03e8
>ACPI: DSDT (v001 IBM    SERBLADE 0x00001000 INTL 0x02002025) @ 0x0000000000000000
>No NUMA configuration found
>Faking a node at 0000000000000000-00000001a8000000
>Entering add_active_range(0, 0, 157) 0 entries of 3200 used
>Entering add_active_range(0, 256, 884656) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1736704) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-00000001a8000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1736704
>early_node_map[3] active PFN ranges
>    0:        0 ->      157
>    0:      256 ->   884656
>    0:  1048576 ->  1736704
>On node 0 totalpages: 1572685
>  DMA zone: 64 pages used for memmap
>  DMA zone: 1329 pages reserved
>  DMA zone: 2604 pages, LIFO batch:0
>  DMA32 zone: 16320 pages used for memmap
>  DMA32 zone: 864240 pages, LIFO batch:31
>  Normal zone: 10752 pages used for memmap
>  Normal zone: 677376 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x588
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x07] enabled)
>Processor #7
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 14, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x0d] address[0xfec10000] gsi_base[24])
>IOAPIC[1]: apic_id 13, address 0xfec10000, GSI 24-47
>ACPI: IOAPIC (id[0x0c] address[0xfec81000] gsi_base[48])
>IOAPIC[2]: apic_id 12, address 0xfec81000, GSI 48-71
>ACPI: IOAPIC (id[0x0b] address[0xfec81400] gsi_base[72])
>IOAPIC[3]: apic_id 11, address 0xfec81400, GSI 72-95
>ACPI: IOAPIC (id[0x0a] address[0xfec82000] gsi_base[96])
>IOAPIC[4]: apic_id 10, address 0xfec82000, GSI 96-119
>ACPI: IOAPIC (id[0x09] address[0xfec82400] gsi_base[120])
>IOAPIC[5]: apic_id 9, address 0xfec82400, GSI 120-143
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ11 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009d000 - 000000000009e000
>Nosave address range: 000000000009e000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Nosave address range: 00000000d7fb0000 - 00000000d7fb1000
>Nosave address range: 00000000d7fb1000 - 00000000d7fd0000
>Nosave address range: 00000000d7fd0000 - 00000000d8000000
>Nosave address range: 00000000d8000000 - 00000000e0000000
>Nosave address range: 00000000e0000000 - 00000000f0000000
>Nosave address range: 00000000f0000000 - 00000000fec00000
>Nosave address range: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at f1000000 (gap: f0000000:ec00000)
>SMP: Allowing 4 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43264 bytes of per cpu data
>Built 1 zonelists.  Total pages: 1544220
>Kernel command line: ro root=LABEL=/ crashkernel=128M@16M
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
>Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x10699000 - 0x14699000
>Memory: 5964612k/6946816k available (2454k kernel code, 326128k reserved, 1458k data, 316k init)
>Calibrating delay using timer specific routine.. 7603.37 BogoMIPS (lpj=3801688)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>Using local APIC timer interrupts.
>result 12500682
>Detected 12.500 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/4 APIC 0x6
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 7599.22 BogoMIPS (lpj=3799614)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 1/6 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU1: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.80GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 2/4 APIC 0x1
>Initializing CPU#2
>Calibrating delay using timer specific routine.. 7599.20 BogoMIPS (lpj=3799603)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 2/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU2: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.80GHz stepping 0a
>SMP alternatives: switching to SMP code
>Booting processor 3/4 APIC 0x7
>Initializing CPU#3
>Calibrating delay using timer specific routine.. 7599.23 BogoMIPS (lpj=3799618)
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU 3/7 -> Node 0
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU3: Thermal monitoring enabled (TM1)
>                  Intel(R) Xeon(TM) CPU 3.80GHz stepping 0a
>Brought up 4 CPUs
>time.c: Using 3.579545 MHz WALL PM GTOD PIT/TSC timer.
>time.c: Detected 3800.216 MHz processor.
>sizeof(vma)=176 bytes
>sizeof(page)=64 bytes
>sizeof(inode)=720 bytes
>sizeof(dentry)=224 bytes
>sizeof(ext3inode)=968 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1920 bytes
>migration_cost=12,1662
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0580-05ff claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0400-043f claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:01:01.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1.PCI3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIS._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIX._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4.PCI6._PRT]
>ACPI: PCI Interrupt Link [LP00] (IRQs *10)
>ACPI: PCI Interrupt Link [LP01] (IRQs *5)
>ACPI: PCI Interrupt Link [LP02] (IRQs *5)
>ACPI: PCI Interrupt Link [LP03] (IRQs *5)
>ACPI: PCI Interrupt Link [LP04] (IRQs *10)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP05] (IRQs) *0, disabled.
>ACPI: PCI Interrupt Link [LP06] (IRQs *10)
>ACPI: Blank IRQ resource
>ACPI: Resource is not an IRQ entry
>ACPI: PCI Interrupt Link [LP07] (IRQs) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>PCI: Bridge: 0000:04:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:04:00.2
>  IO window: disabled.
>  MEM window: db000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: db000000-dcffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:07:00.2
>  IO window: 5000-ffff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: 5000-ffff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.0
>  IO window: 4000-4fff
>  MEM window: dd000000-deffffff
>  PREFETCH window: f9000000-f90fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: f8000000-f8ffffff
>  PREFETCH window: f0000000-f7ffffff
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:04:00.0 to 64
>PCI: Setting latency timer of device 0000:04:00.2 to 64
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:07:00.0 to 64
>PCI: Setting latency timer of device 0000:07:00.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
>TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2336k freed
>audit: initializing netlink socket (disabled)
>audit(1180100543.051:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 214E108B717C14AC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>Allocate Port Service[0000:00:03.0:pcie00]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>Allocate Port Service[0000:00:04.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU3] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU0] (supports 8 throttling states)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:01: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 14 (level, low) -> IRQ 14
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>ICH5: neither IDE port enabled (BIOS)
>Probing IDE interface ide0...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>i8042.c: Can't read CTR while initializing i8042.
>i8042: probe of i8042 failed with error -5
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1042k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x00002200
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00002600
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>SCSI subsystem initialized
>Fusion MPT base driver 3.04.03
>Copyright (c) 1999-2007 LSI Logic Corporation
>Fusion MPT SPI Host driver 3.04.03
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 24 (level, low) -> IRQ 24
>mptbase: Initiating ioc0 bringup
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ioc0: 53C1030: Capabilities={Initiator}
>usb 1-1: configuration #1 chosen from 1 choice
>hub 1-1:1.0: USB hub found
>hub 1-1:1.0: 4 ports detected
>scsi0 : ioc0: LSI53C1030, FwRev=01032933h, Ports=1, MaxQ=222, IRQ=24
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>input: IBM IBM MM2 as /class/input/input1
>input: USB HID v1.10 Keyboard [IBM IBM MM2] on usb-0000:00:1d.0-2
>input: IBM IBM MM2 as /class/input/input2
>input: USB HID v1.10 Mouse [IBM IBM MM2] on usb-0000:00:1d.0-2
>usb 1-1.2: new full speed USB device using uhci_hcd and address 4
>usb 1-1.2: configuration #1 chosen from 1 choice
>hub 1-1.2:1.0: USB hub found
>hub 1-1.2:1.0: 4 ports detected
>usb 1-1.2.3: new full speed USB device using uhci_hcd and address 5
>usb 1-1.2.3: configuration #1 chosen from 1 choice
>libusual: request for usb-storage succeeded, but module is not present
>scsi 0:0:2:0: Direct-Access     LSILOGIC 1030 IM       IM 1000 PQ: 0 ANSI: 2
>SCSI device sda: 286511104 512-byte hdwr sectors (146694 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 08
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 286511104 512-byte hdwr sectors (146694 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 08
>SCSI device sda: write cache: disabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:2:0: Attached scsi disk sda
>scsi 0:0:8:0: Processor         IBM      26K4888a S320  1 1    PQ: 0 ANSI: 2
> target0:0:8: Beginning Domain Validation
> target0:0:8: Ending Domain Validation
> target0:0:8: asynchronous
>scsi 0:1:2:0: Direct-Access     IBM-ESXS PYH146C3-ETS10FN RXQN PQ: 0 ANSI: 4
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
>mptbase: ioc0:   volume is now optimal, enabled, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>mptbase: ioc0:   PhysDisk is now online, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>mptbase: ioc0:   PhysDisk is now online, quiesced
> target0:1:2: Beginning Domain Validation
> target0:1:2: Ending Domain Validation
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
>mptbase: ioc0:   volume is now optimal, enabled
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>mptbase: ioc0:   PhysDisk is now online
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>mptbase: ioc0:   PhysDisk is now online
> target0:1:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 80)
>scsi 0:1:3:0: Direct-Access     IBM-ESXS PYH146C3-ETS10FN RXQN PQ: 0 ANSI: 4
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
>mptbase: ioc0:   volume is now optimal, enabled, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>mptbase: ioc0:   PhysDisk is now online, quiesced
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>mptbase: ioc0:   PhysDisk is now online, quiesced
> target0:1:3: Beginning Domain Validation
> target0:1:3: Ending Domain Validation
>mptbase: ioc0: RAID STATUS CHANGE for VolumeID 2
>mptbase: ioc0:   volume is now optimal, enabled
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>mptbase: ioc0:   PhysDisk is now online
>mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>mptbase: ioc0:   PhysDisk is now online
> target0:1:3: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 80)
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1630 types, 179 bools, 1 sens, 1024 cats
>security:  60 classes, 51372 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1180100551.284:2): policy loaded auid=4294967295
>Initializing USB Mass Storage driver...
>scsi1 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 5
>usb-storage: waiting for device to settle before scanning
>tg3.c:v3.72 (January 8, 2007)
>ACPI: PCI Interrupt 0000:05:01.0[A] -> GSI 77 (level, low) -> IRQ 77
>eth0: Tigon3 [partno(BCM95704s) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:14:5e:bd:29:4a
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] Split[0] WireSpeed[0] TSOcap[0] 
>eth0: dma_rwctrl[769f4000] dma_mask[64-bit]
>ACPI: PCI Interrupt 0000:05:01.1[B] -> GSI 78 (level, low) -> IRQ 78
>EDAC MC: Ver: 2.0.1 Apr 27 2007
>eth1: Tigon3 [partno(BCM95704s) rev 2100 PHY(serdes)] (PCIX:133MHz:64-bit) 1000Base-SX Ethernet 00:14:5e:bd:29:4b
>eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[0] TSOcap[1] 
>eth1: dma_rwctrl[769f4000] dma_mask[64-bit]
>EDAC e752x: tolm = d8000, remapbase = 180000, remaplimit = 1a4000
>EDAC MC0: Giving out device to e752x_edac E7520: DEV 0000:00:00.0
>intel_rng: FWH not detected
>libata version 2.00 loaded.
>iTCO_vendor_support: vendor-support=0
>PCI: Enabling device 0000:00:1d.4 (0000 -> 0002)
>i6300ESB timer: initialized (0xffffc20000014400). heartbeat=30 sec (nowayout=0)
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a 6300ESB TCO device (Version=1, TCOBASE=0x05e0)
>iTCO_wdt: cannot register miscdev on minor=130 (err=-16)
>iTCO_wdt: No card detected
>input: PC Speaker as /class/input/input3
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>Floppy drive(s): fd0 is 1.44M
>sd 0:0:2:0: Attached scsi generic sg0 type 0
>scsi 0:0:8:0: Attached scsi generic sg1 type 3
>scsi 0:1:2:0: Attached scsi generic sg2 type 0
>scsi 0:1:3:0: Attached scsi generic sg3 type 0
>floppy0: no floppy controllers found
>Floppy drive(s): fd0 is 1.44M
>scsi 1:0:0:0: CD-ROM            MATSHITA UJDA765aDVD/CDRW 1.20 PQ: 0 ANSI: 0
>scsi 1:0:0:0: Attached scsi generic sg4 type 5
>usb-storage: device scan complete
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda1, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-1, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-2, type ext3), uses xattr
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on dm-3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev dm-3, type ext3), uses xattr
>Adding 524280k swap on /dev/mainvg/swaplv.  Priority:-1 extents:1 across:524280k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>PM: Writing back config space on device 0000:05:01.0 at offset b (was 164814e4, writing 2e81014)
>PM: Writing back config space on device 0000:05:01.0 at offset 3 (was 804000, writing 804010)
>PM: Writing back config space on device 0000:05:01.0 at offset 2 (was 2000000, writing 2000010)
>PM: Writing back config space on device 0000:05:01.0 at offset 1 (was 2b00000, writing 2b00146)
>PM: Writing back config space on device 0000:05:01.0 at offset 0 (was 164914e4, writing 16a814e4)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 1000 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 241373: 155459