Attachment 155495 Details for Bug 241470 – log file

log file

wifi-bcm43xx_mac80211-dontwork.txt (text/plain), 18.82 KB, created by jean-noel on 2007-05-26 10:00:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jean-noel

Created: 2007-05-26 10:00:24 UTC

Size: 18.82 KB

patch

obsolete

>[root@localhost ~]# uname -a
>Linux localhost.localdomain 2.6.21-1.3194.fc7 #1 SMP Wed May 23 22:35:01 EDT 2007 i686 i686 i386 GNU/Linux
>[root@localhost ~]#
>
>[root@localhost ~]# modprobe bcm43xx
>
></var/log/message:>
>May 26 10:56:15 localhost kernel: ieee80211: 802.11 data/management/control stack, git-1.1.13
>May 26 10:56:15 localhost kernel: ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>May 26 10:56:15 localhost kernel: bcm43xx driver
>
>[root@localhost ~]# modprobe bcm43xx_mac80211
>
></var/log/message:>
>May 26 10:59:06 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 17 (level, low) -> IRQ 18
>May 26 10:59:06 localhost kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
>May 26 10:59:06 localhost kernel: ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
>May 26 10:59:06 localhost kernel: ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
>May 26 10:59:06 localhost kernel: ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
>May 26 10:59:06 localhost kernel: ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
>May 26 10:59:06 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 10:59:06 localhost kernel: ssb: Switching to PCI core, index 4
>May 26 10:59:06 localhost kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:01:08.0
>May 26 10:59:06 localhost kernel: bcm43xx_mac80211: Broadcom 4306 WLAN found
>May 26 10:59:06 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 10:59:06 localhost kernel: bcm43xx_mac80211: Found PHY: Analog 2, Type 2, Revision 2
>May 26 10:59:06 localhost kernel: bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>May 26 10:59:06 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 10:59:07 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 10:59:07 localhost kernel: ssb: Switching to PCI core, index 4
>May 26 10:59:07 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 10:59:07 localhost kernel: bcm43xx_mac80211: YOUR FIRMWARE IS TOO OLD. Firmware from binary drivers older than version 4.x is unsupported. You must upgrade your firmware files.
>May 26 10:59:09 localhost NetworkManager: <info>  wlan0: Device is fully-supported using driver 'bcm43xx-pci'. 
>May 26 10:59:09 localhost NetworkManager: <info>  nm_device_init(): waiting for device's worker thread to start 
>May 26 10:59:09 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 10:59:09 localhost kernel: bcm43xx_mac80211: YOUR FIRMWARE IS TOO OLD. Firmware from binary drivers older than version 4.x is unsupported. You must upgrade your firmware files.
>May 26 10:59:09 localhost NetworkManager: <info>  nm_device_init(): device's worker thread started, continuing. 
>May 26 10:59:09 localhost NetworkManager: <info>  Now managing wireless (802.11) device 'wlan0'. 
>May 26 10:59:09 localhost NetworkManager: <info>  Deactivating device wlan0. 
>May 26 10:59:11 localhost NetworkManager: <WARN>  nm_device_802_11_wireless_scan(): could not trigger wireless scan on device wlan0: Network is down 
>May 26 10:59:31 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 10:59:31 localhost kernel: bcm43xx_mac80211: YOUR FIRMWARE IS TOO OLD. Firmware from binary drivers older than version 4.x is unsupported. You must upgrade your firmware files.
>May 26 10:59:33 localhost NetworkManager: <WARN>  nm_device_802_11_wireless_scan(): could not trigger wireless scan on device wlan0: Network is down
>
>[root@localhost ~]# rmmod bcm43xx_mac80211
>
>May 26 11:00:12 localhost kernel: ACPI: PCI interrupt for device 0000:01:08.0 disabled
>May 26 11:00:13 localhost NetworkManager: <info>  Deactivating device wlan0. 
>May 26 11:00:13 localhost NetworkManager: <WARN>  nm_device_802_11_wireless_get_mode(): error getting card mode on wlan0: No such device
>
>[root@localhost ~]# cd /lib/firmware/
>[root@localhost firmware]# rm -f bcm43xx_*
>[root@localhost firmware]# cp wlan_marchepresque/* .
>
>[root@localhost firmware]# modprobe bcm43xx_mac80211
>
>
>May 26 11:02:20 localhost kernel: ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 17 (level, low) -> IRQ 18
>May 26 11:02:20 localhost kernel: ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x04, vendor 0x4243)
>May 26 11:02:20 localhost kernel: ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x05, vendor 0x4243)
>May 26 11:02:20 localhost kernel: ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x02, vendor 0x4243)
>May 26 11:02:20 localhost kernel: ssb: Core 3 found: V90 (cc 0x807, rev 0x02, vendor 0x4243)
>May 26 11:02:20 localhost kernel: ssb: Core 4 found: PCI (cc 0x804, rev 0x09, vendor 0x4243)
>May 26 11:02:20 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:02:20 localhost kernel: ssb: Switching to PCI core, index 4
>May 26 11:02:20 localhost kernel: ssb: Sonics Silicon Backplane found on PCI device 0000:01:08.0
>May 26 11:02:20 localhost kernel: bcm43xx_mac80211: Broadcom 4306 WLAN found
>May 26 11:02:20 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:02:20 localhost kernel: bcm43xx_mac80211: Found PHY: Analog 2, Type 2, Revision 2
>May 26 11:02:20 localhost kernel: bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>May 26 11:02:20 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 11:02:20 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 11:02:20 localhost kernel: ssb: Switching to PCI core, index 4
>May 26 11:02:20 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:02:21 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:02:21 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: Radio turned on
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: Radio enabled by hardware
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur_idle_tssi measuring failed. (cur=6, tgt=62). Disabling TX power adjustment.
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: Chip initialized
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: 30-bit DMA initialized
>May 26 11:02:21 localhost kernel: bcm43xx_mac80211: Wireless interface started
>May 26 11:02:21 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>May 26 11:02:21 localhost NetworkManager: <info>  wlan0: Device is fully-supported using driver 'bcm43xx-pci'. 
>May 26 11:02:21 localhost NetworkManager: <info>  nm_device_init(): waiting for device's worker thread to start 
>May 26 11:02:21 localhost NetworkManager: <info>  nm_device_init(): device's worker thread started, continuing. 
>May 26 11:02:21 localhost NetworkManager: <info>  Now managing wireless (802.11) device 'wlan0'. 
>May 26 11:02:21 localhost NetworkManager: <info>  Deactivating device wlan0. 
>May 26 11:02:31 localhost NetworkManager: <info>  SWITCH: no current connection, found better connection 'wlan0'. 
>May 26 11:02:31 localhost dhcdbd: message_handler: message handler not found under /com/redhat/dhcp/wlan0 for sub-path wlan0.dbus.get.reason
>May 26 11:02:31 localhost NetworkManager: <info>  Will activate connection 'wlan0/sitro'. 
>May 26 11:02:31 localhost NetworkManager: <info>  Device wlan0 activation scheduled... 
>May 26 11:02:31 localhost NetworkManager: <info>  Activation (wlan0) started... 
>May 26 11:02:31 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled... 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) started... 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled... 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 5 (Device Prepare) complete. 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) starting... 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0/wireless): access point 'sitro' is encrypted, but NO valid key exists.  New key needed. 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) New wireless user key requested for network 'sitro'. 
>May 26 11:02:32 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 5 (Device Configure) complete. 
>
>the applet password ask for the key :
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) New wireles
>s user key for network 'sitro' received. 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) scheduled... 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) started... 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) scheduled... 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) complete. 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) starting... 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0/wireless): a
>ccess point 'sitro' is encrypted, and a key exists.  No new key needed. 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'INTERFAC
>E_ADD wlan0             wext    /var/run/wpa_supplicant ' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'AP_SCAN 
>1'
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'ADD_NETW
>ORK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was '0' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 ssid 736974726f' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 key_mgmt NONE' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 wep_key0 <key>' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 wep_tx_keyidx 0' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: sending command 'ENABLE_N
>ETWORK 0' 
>May 26 11:03:02 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:02 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) complete. 
>May 26 11:03:03 localhost wpa_supplicant[2530]: Trying to associate with 00:0d:5
>4:9c:7c:7b (SSID='sitro' freq=2452 MHz) 
>May 26 11:03:08 localhost NetworkManager: <info>  Old device 'wlan0' activating,
> won't change. 
>May 26 11:03:18 localhost wpa_supplicant[2530]: Authentication with 00:00:00:00:
>00:00 timed out. 
>May 26 11:03:19 localhost wpa_supplicant[2530]: Trying to associate with 00:0d:5
>4:9c:7c:7b (SSID='sitro' freq=2452 MHz) 
>May 26 11:03:22 localhost NetworkManager: <info>  Activation (wlan0/wireless): a
>ssociation took too long (>20s), asking for new key. 
>May 26 11:03:22 localhost NetworkManager: <info>  Activation (wlan0) New wireles
>s user key requested for network 'sitro'. 
>May 26 11:03:34 localhost wpa_supplicant[2530]: Authentication with 00:00:00:00:
>00:00 timed out. 
>May 26 11:03:35 localhost wpa_supplicant[2530]: Trying to associate with 00:0d:5
>4:9c:7c:7b (SSID='sitro' freq=2452 MHz) 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) New wireles
>s user key for network 'sitro' received. 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) scheduled... 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) started... 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) scheduled... 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 1 of 
>5 (Device Prepare) complete. 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) starting... 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0/wireless): a
>ccess point 'sitro' is encrypted, and a key exists.  No new key needed. 
>May 26 11:03:44 localhost wpa_supplicant[2530]: CTRL-EVENT-TERMINATING - signal 
>15 received 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'INTERFAC
>E_ADD wlan0             wext    /var/run/wpa_supplicant ' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'AP_SCAN 
>1' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'ADD_NETW
>ORK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was '0' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 ssid 736974726f' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 key_mgmt NONE' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 wep_key0 <key>' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'SET_NETW
>ORK 0 wep_tx_keyidx 0' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: sending command 'ENABLE_N
>ETWORK 0' 
>May 26 11:03:44 localhost NetworkManager: <info>  SUP: response was 'OK' 
>May 26 11:03:44 localhost NetworkManager: <info>  Activation (wlan0) Stage 2 of 
>5 (Device Configure) complete. 
>May 26 11:03:44 localhost wpa_supplicant[2543]: Trying to associate with 00:0d:5
>4:9c:7c:7b (SSID='sitro' freq=2452 MHz) 
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: Removing Interface type 2
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: Wireless interface stopped
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0200 (RX) max used 
>slots: 1/64
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x02A0 (TX) max used 
>slots: 0/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0280 (TX) max used 
>slots: 0/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0260 (TX) max used 
>slots: 0/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0240 (TX) max used 
>slots: 0/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0220 (TX) max used 
>slots: 128/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: DMA-32 0x0200 (TX) max used 
>slots: 0/128
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 11:03:45 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:03:45 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:03:45 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 11:03:59 localhost wpa_supplicant[2543]: Authentication with 00:00:00:00:
>00:00 timed out. 
>May 26 11:03:59 localhost wpa_supplicant[2543]: Failed to initiate AP scan. 
>May 26 11:04:02 localhost wpa_supplicant[2543]: Failed to initiate AP scan. 
>May 26 11:04:04 localhost NetworkManager: <info>  Activation (wlan0/wireless): association took too long (>20s), asking for new key.
>May 26 11:04:04 localhost NetworkManager: <info>  Activation (wlan0) New wireles
>s user key requested for network 'sitro'. 
>May 26 11:04:06 localhost NetworkManager: <info>  Activation (wlan0) New wireles
>s user key request for network 'sitro' was canceled. 
>May 26 11:04:06 localhost NetworkManager: <info>  Activation (wlan0) failure sch
>eduled... 
>May 26 11:04:06 localhost NetworkManager: <info>  Activation (wlan0) failed for 
>access point (sitro) 
>May 26 11:04:06 localhost NetworkManager: <info>  Activation (wlan0) failed. 
>May 26 11:04:06 localhost NetworkManager: <info>  Deactivating device wlan0. 
>May 26 11:04:06 localhost wpa_supplicant[2543]: CTRL-EVENT-TERMINATING - signal 
>15 received 
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 11:04:07 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:04:07 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Radio turned on
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Radio enabled by hardware
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur
>_idle_tssi measuring failed. (cur=0, tgt=62). Disabling TX power adjustment.
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Chip initialized
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: 30-bit DMA initialized
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Wireless interface started
>May 26 11:04:07 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Removing Interface type 2
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Wireless interface stopped
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0200 (RX) max used 
>slots: 1/64
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x02A0 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0280 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0260 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0240 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0220 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: DMA-32 0x0200 (TX) max used 
>slots: 0/128
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 11:04:07 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:04:07 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:04:07 localhost kernel: bcm43xx_mac80211: Radio turned off
>May 26 11:04:08 localhost kernel: bcm43xx_mac80211: Adding Interface type 2
>May 26 11:04:09 localhost kernel: ssb: Switching to ChipCommon core, index 0
>May 26 11:04:09 localhost kernel: ssb: Switching to IEEE 802.11 core, index 1
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: Radio turned on
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: Radio enabled by hardware
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: !WARNING! Idle-TSSI phy->cur
>_idle_tssi measuring failed. (cur=0, tgt=62). Disabling TX power adjustment.
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: Chip initialized
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: 30-bit DMA initialized
>May 26 11:04:09 localhost kernel: bcm43xx_mac80211: Wireless interface started
>May 26 11:04:09 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready
>
>AND THEN the PC is Blocked I need to restart it with the on/off power button
>
>

Actions: View

Attachments on bug 241470: 155495 | 155496