Attachment 155508 Details for Bug 241498 – dmesg at time of crash

dmesg at time of crash

dmesg.02 (text/plain), 20.24 KB, created by jan p. springer on 2007-05-26 20:04:21 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: jan p. springer

Created: 2007-05-26 20:04:21 UTC

Size: 20.24 KB

patch

obsolete

>Linux version 2.6.20-1.2948.fc6 (brewbuilder@hs20-bc1-7.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 19:48:40 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003f6d0000 end: 000000003f7d0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003f7d0000 size: 000000000000f000 end: 000000003f7df000 type: 3
>copy_e820_map() start: 000000003f7df000 size: 0000000000021000 end: 000000003f800000 type: 4
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003f7d0000 (usable)
> BIOS-e820: 000000003f7d0000 - 000000003f7df000 (ACPI data)
> BIOS-e820: 000000003f7df000 - 000000003f800000 (ACPI NVS)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>119MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 260048) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   260048
>early_node_map[1] active PFN ranges
>    0:        0 ->   260048
>On node 0 totalpages: 260048
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 299 pages used for memmap
>  HighMem zone: 30373 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 ACPIAM                                ) @ 0x000f55f0
>ACPI: RSDT (v001 A M I  OEMRSDT  0x04000405 MSFT 0x00000097) @ 0x3f7d0000
>ACPI: FADT (v002 A M I  OEMFACP  0x04000405 MSFT 0x00000097) @ 0x3f7d0200
>ACPI: MADT (v001 A M I  OEMAPIC  0x04000405 MSFT 0x00000097) @ 0x3f7d0390
>ACPI: OEMB (v001 A M I  AMI_OEM  0x04000405 MSFT 0x00000097) @ 0x3f7df040
>ACPI: DSDT (v001  116W0 116W0CA0 0x00000ca0 INTL 0x02002026) @ 0x00000000
>ACPI: PM-Timer IO Port: 0xe408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 6:9 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 40000000 (gap: 3f800000:c0780000)
>Detected 1593.598 MHz processor.
>Built 1 zonelists.  Total pages: 257509
>Kernel command line: ro root=LABEL=/ vga=0x305 elevator=cfq psmouse.proto=imps pci=assign-busses rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1022552k/1040192k available (2189k kernel code, 16800k reserved, 1159k data, 236k init, 122688k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc06236e9 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc06236e9   (2189 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3220.27 BogoMIPS (lpj=1610137)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: a7e9fbbf 00000000 00000000 00000000 00000180 00000000 00000000
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 1024K
>CPU: After all inits, caps: a7e9f3bf 00000000 00000000 00002040 00000180 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) M processor 1600MHz stepping 05
>Total of 1 processors activated (3220.27 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region e400-e47f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region ec00-ec3f claimed by ICH4 GPIO
>0000:00:1f.1: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.1: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.1: trying to change BAR2 from 0000 to 0170
>0000:00:1f.1: trying to change BAR3 from 0000 to 0374
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x480-0x48f has been reserved
>pnp: 00:07: ioport range 0x4c0-0x4cf has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bus 2, cardbus bridge: 0000:01:00.0
>  IO window: 0000c000-0000c0ff
>  IO window: 0000c400-0000c4ff
>  PREFETCH window: 44000000-47ffffff
>  MEM window: 48000000-4bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fe800000-fe8fffff
>  PREFETCH window: de600000-de6fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 21 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1484k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1179832570.755:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 41B40C132A183A53
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xf0000000, mapped to 0xf8880000, using 1536k, total 8000k
>vesafb: mode is 1024x768x8, linelength=1024, pages=9
>vesafb: protected mode interface info at 00ff:44f0
>vesafb: scrolling: redraw
>vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Thermal Zone [THRM] (75 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 855 Chipset.
>agpgart: Detected 8060K stolen memory.
>agpgart: AGP aperture is 128M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH4: IDE controller at PCI slot 0000:00:1f.1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>ICH4: chipset revision 3
>ICH4: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: HTS726060M9AT00, ATA DISK drive
>hda: hw_config=600b
>hda: hw_config=600b
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 512KiB
>hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=16383/255/63<6>hda: hw_config=600b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:01:00.0 [1584:3002]
>Yenta O2: res at 0x94/0xD4: 00/ea
>Yenta O2: enabling read prefetch/write burst
>Yenta: ISA IRQ mask 0x0cb8, PCI irq 16
>Socket status: 30000007
>pcmcia: parent PCI bridge I/O window: 0xc000 - 0xcfff
>cs: IO port probe 0xc000-0xcfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfe800000 - 0xfe8fffff
>pcmcia: parent PCI bridge Memory window: 0xde600000 - 0xde6fffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S3 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>Time: tsc clocksource has been installed.
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000dea0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>input: PS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000dec0
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000df40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xfeb7f400
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>kjournald starting.  Commit interval 600 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1179832580.045:2): selinux=0 auid=4294967295
>ieee1394: Initialized config rom entry `ip1394'
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:08.0[A] -> GSI 20 (level, low) -> IRQ 22
>ieee80211_crypt: registered algorithm 'NULL'
>intel_rng: FWH not detected
>e100: eth0: e100_probe: addr 0xfe8ff000, irq 22, MAC addr 00:03:0D:03:08:AD
>ACPI: PCI Interrupt 0000:01:01.0[A] -> GSI 22 (level, low) -> IRQ 23
>ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23]  MMIO=[fe8fd800-fe8fdfff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x6460)
>iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 17
>ipw2100: Intel(R) PRO/Wireless 2100 Network Driver, git-1.2.2
>ipw2100: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:01:02.0[A] -> GSI 23 (level, low) -> IRQ 21
>ipw2100: Detected Intel PRO/Wireless 2100 Network Connection
>ieee1394: Host added: ID:BUS[0-00:1023]  GUID[00030d4924404aec]
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>intel8x0_measure_ac97_clock: measured 51448 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
>ieee1394: raw1394: /dev/raw1394 device initialized
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [AC0] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>ACPI: Battery Slot [BAT1] (battery absent)
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input4
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda4, internal journal
>kjournald starting.  Commit interval 600 seconds
>EXT3 FS on hda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>NTFS driver 2.1.28 [Flags: R/W MODULE].
>NTFS-fs warning (device hda1): parse_options(): Sloppy option given. Ignoring unrecognized mount option(s) and continuing.
>NTFS volume version 3.1.
>Adding 1052248k swap on /dev/hda3.  Priority:-1 extents:1 across:1052248k
>hda: hw_config=600b
>hda: hw_config=600b
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>Time: acpi_pm clocksource has been installed.
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8126 buckets, 65008 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>e100: eth1: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>audit(1179825458.395:3): audit_pid=2375 old=0 by auid=4294967295
>eth1: no IPv6 routers present
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 19
>[drm] Initialized i915 1.6.0 20060119 on minor 1
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>usb 2-2: new low speed USB device using uhci_hcd and address 2
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech USB Receiver as /class/input/input7
>input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>usb 4-1: new high speed USB device using ehci_hcd and address 3
>usb 4-1: configuration #1 chosen from 1 choice
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 3
>usb-storage: waiting for device to settle before scanning
>scsi 0:0:0:0: Direct-Access              Cn Memory        1100 PQ: 0 ANSI: 0 CCS
>SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 43 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 3963904 512-byte hdwr sectors (2030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 43 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi removable disk sda
>usb-storage: device scan complete
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>usb 4-1: USB disconnect, address 3

Actions: View

Attachments on bug 241498: 155507 | 155508 | 155509 | 155510 | 155511 | 155512 | 155513