Attachment 155521 Details for Bug 241534 – dmesg output.

dmesg output.

dmesg.txt (text/plain), 28.35 KB, created by Marco Matarazzo on 2007-05-27 14:29:16 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Marco Matarazzo

Created: 2007-05-27 14:29:16 UTC

Size: 28.35 KB

patch

obsolete

>Linux version 2.6.20-1.2948.fc6 (brewbuilder@hs20-bc1-6.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Fri Apr 27 18:53:15 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fd90000 end: 000000007fe90000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fe90000 size: 0000000000070000 end: 000000007ff00000 type: 4
>copy_e820_map() start: 000000007ff00000 size: 0000000000100000 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
>copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
>copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fe90000 (usable)
> BIOS-e820: 000000007fe90000 - 000000007ff00000 (ACPI NVS)
> BIOS-e820: 000000007ff00000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1150MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5c80
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 523920) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   523920
>early_node_map[1] active PFN ranges
>    0:        0 ->   523920
>On node 0 totalpages: 523920
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2876 pages used for memmap
>  HighMem zone: 291668 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f5ae0
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x7fe9515a
>ACPI: FADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9ddee
>ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9de62
>ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9deca
>ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 0x7fe9df02
>ACPI: TCPA (v001 PTLTD  CALISTGA 0x06040000  PTL 0x00000001) @ 0x7fe9df3e
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x7fe9df70
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x7fe9dfd8
>ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 0x7fe96862
>ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 0x7fe961d0
>ACPI: SSDT (v001  PmRef  Cpu0Tst 0x00003000 INTL 0x20050624) @ 0x7fe9573a
>ACPI: SSDT (v001  PmRef  Cpu1Tst 0x00003000 INTL 0x20050624) @ 0x7fe95694
>ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 0x7fe951ae
>ACPI: DSDT (v001 INTEL  CALISTGA 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: 2 duplicate APIC table ignored.
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:15 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:15 APIC version 20
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x02] address[0xfec28000] gsi_base[24])
>IOAPIC[1]: apic_id 2, version 255, address 0xfec28000, GSI 24-279
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 2 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Detected 1829.102 MHz processor.
>Built 1 zonelists.  Total pages: 518804
>Kernel command line: ro root=LABEL=/ combined_mode=libata rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec28000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c079a000 soft=c077a000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2067232k/2095680k available (2156k kernel code, 27188k reserved, 1128k data, 232k init, 1178176k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc55000 - 0xfffff000   (3752 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc073b000 - 0xc0775000   ( 232 kB)
>      .data : 0xc061b2a9 - 0xc0735494   (1128 kB)
>      .text : 0xc0400000 - 0xc061b2a9   (2156 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Using HPET for base-timer
>Calibrating delay using timer specific routine.. 3661.65 BogoMIPS (lpj=1830826)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c079b000 soft=c077b000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3657.91 BogoMIPS (lpj=1828957)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000e3bd 00000000 00000001
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003940 0000e3bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel(R) Core(TM)2 CPU         T5600  @ 1.83GHz stepping 06
>Total of 2 processors activated (7319.56 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=34
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd5a3, last bus=10
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>0000:00:1f.2: trying to change BAR0 from 0000 to 01F0
>0000:00:1f.2: trying to change BAR1 from 0000 to 03F4
>0000:00:1f.2: trying to change BAR2 from 0000 to 0170
>0000:00:1f.2: trying to change BAR3 from 0000 to 0374
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #0b (-#0e) is hidden behind transparent bridge #0a (-#0a) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 10 *11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:07: ioport range 0x6a0-0x6af has been reserved
>pnp: 00:07: ioport range 0x6b0-0x6ff has been reserved
>PCI: Failed to allocate mem resource #6:20000@c0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: d0000000-d1ffffff
>  PREFETCH window: b0000000-bfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: c8000000-c9ffffff
>  PREFETCH window: c0000000-c1ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: ca000000-cbffffff
>  PREFETCH window: c2000000-c3ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: cc000000-cdffffff
>  PREFETCH window: c4000000-c5ffffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: 5000-5fff
>  MEM window: ce000000-cfffffff
>  PREFETCH window: c6000000-c7ffffff
>PCI: Bus 11, cardbus bridge: 0000:0a:06.0
>  IO window: 00006000-000060ff
>  IO window: 00006400-000064ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 6000-6fff
>  MEM window: d2000000-d20fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Enabling device 0000:00:1e.0 (0104 -> 0107)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:0a:06.0[A] -> GSI 22 (level, low) -> IRQ 20
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1486k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1180278792.845:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key D8906D8AE5DBA77
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu0Cst] [20060707]
>Monitor-Mwait will be used to enter C-1 state
>Monitor-Mwait will be used to enter C-2 state
>Monitor-Mwait will be used to enter C-3 state
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Ist] [20060707]
>ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] OemTableId [ Cpu1Cst] [20060707]
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [TZS0] (51 C)
>ACPI: Thermal Zone [TZS1] (53 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ide0: I/O resource 0x1F0-0x1F7 not free.
>ide0: ports already in use, skipping probe
>ide1: I/O resource 0x170-0x177 not free.
>ide1: ports already in use, skipping probe
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:0a:06.0 [1025:0107]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:0a:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 20
>Socket status: 30000006
>Yenta: Raising subordinate bus# of parent bus (#0a) from #0a to #0e
>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>cs: IO port probe 0x6000-0x6fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xd2000000 - 0xd20fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBD0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 819k
>Time: hpet clocksource has been installed.
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 21, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps: 0xa04713/0x204000
>input: SynPS/2 Synaptics TouchPad as /class/input/input1
>input: AT Translated Set 2 keyboard as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 21, io mem 0xd2304000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/all, error -71
>SCSI subsystem initialized
>libata version 2.00 loaded.
>ata_piix 0000:00:1f.2: version 2.00ac7
>ata_piix 0000:00:1f.2: MAP [ IDE IDE P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: PATA max UDMA/100 cmd 0x1F0 ctl 0x3F6 bmdma 0x18B0 irq 14
>ata2: SATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0x18B8 irq 15
>scsi0 : ata_piix
>ata1.00: ATA-7, max UDMA/100, 234441648 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.01: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/100
>usb 5-7: new high speed USB device using ehci_hcd and address 3
>usb 5-7: configuration #1 chosen from 1 choice
>ata1.01: configured for UDMA/33
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0x177
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD1200UE-22K 01.0 PQ: 0 ANSI: 5
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 1-1: new low speed USB device using uhci_hcd and address 4
> sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D ac00 PQ: 0 ANSI: 5
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech Trackball as /class/input/input3
>input: USB HID v1.10 Mouse [Logitech Trackball] on usb-0000:00:1d.0-1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1180278796.164:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 0:0:1:0: Attached scsi generic sg1 type 5
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>sdhci: Secure Digital Host Controller Interface driver, 0.12
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:0a:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:0a:06.3[A] -> GSI 22 (level, low) -> IRQ 20
>sdhci:slot0: Controller reports > 25 MHz base clock, but no high speed support.
>mmc0: SDHCI at 0xd2005800 irq 20 PIO
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>ACPI: PCI Interrupt 0000:0a:06.2[A] -> GSI 22 (level, low) -> IRQ 20
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:1:0: Attached scsi CD-ROM sr0
>ieee80211_crypt: registered algorithm 'NULL'
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>eth0: RTL8168b/8111b at 0xf8958000, 00:16:d3:4a:0e:01, IRQ 16
>nvidia: module license 'NVIDIA' taints kernel.
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86 Kernel Module  1.0-9755  Mon Feb 26 23:21:15 PST 2007
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.0d
>ipw3945: Copyright(c) 2003-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:05:00.0 to 64
>ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT0] (battery present)
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID0]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>Adding 2578424k swap on /dev/sda4.  Priority:-1 extents:1 across:2578424k
>r8169: eth0: link up
>r8169: eth0: link up
>ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>ieee80211_crypt: registered algorithm 'WEP'
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>eth0: no IPv6 routers present
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/00:00:00:00:20/00:00:00:00:00/b0 tag 0 cdb 0x0 data 0 
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/33
>ata1: EH complete
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: limiting speed to UDMA/25
>ata1.01: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata1.01: cmd a0/01:00:00:00:00/00:00:00:00:00/b0 tag 0 cdb 0x25 data 8 in
>         res 40/00:03:00:00:00/00:00:00:00:00/b0 Emask 0x4 (timeout)
>ata1: port is slow to respond, please be patient (Status 0xd0)
>ata1: port failed to respond (30 secs, Status 0xd0)
>ata1: soft resetting port
>ata1.00: configured for UDMA/100
>ata1.01: configured for UDMA/25
>ata1: EH complete
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>ata1.01: qc timeout (cmd 0xa0)
>ata1.01: limiting speed to UDMA/16

Actions: View

Attachments on bug 241534: 155521 | 155522