Attachment 155625 Details for Bug 241724 – dmesg log from a problematic boot.

dmesg log from a problematic boot.

dmesg (text/plain), 22.11 KB, created by Bruno Wolff III on 2007-05-29 20:21:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Bruno Wolff III

Created: 2007-05-29 20:21:54 UTC

Size: 22.11 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 0000000000020000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001fec0000 end: 000000001ffc0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001ffc0000 size: 0000000000038000 end: 000000001fff8000 type: 3
>copy_e820_map() start: 000000001fff8000 size: 0000000000008000 end: 0000000020000000 type: 4
>copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffc0000 (usable)
> BIOS-e820: 000000001ffc0000 - 000000001fff8000 (ACPI data)
> BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131008) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131008
>  HighMem    131008 ->   131008
>early_node_map[1] active PFN ranges
>    0:        0 ->   131008
>On node 0 totalpages: 131008
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125921 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FF980, 0014 (r0 AMI   )
>ACPI: RSDT 1FFF0000, 0028 (r1 D815EA EA81510A 20010619 MSFT     1011)
>ACPI: FACP 1FFF1000, 0074 (r1 D815EA EA81510A 20010619 MSFT     1011)
>ACPI: DSDT 1FFE0000, 300C (r1 D815EA EA81510A       18 MSFT  100000B)
>ACPI: FACS 1FFF8000, 0040
>ACPI: PM-Timer IO Port: 0x408
>Allocating PCI resources starting at 30000000 (gap: 20000000:dfb80000)
>Built 1 zonelists.  Total pages: 129985
>Kernel command line: ro root=/dev/md1
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0140b000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 797.457 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511512k/524032k available (2066k kernel code, 11876k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdffc0000   ( 511 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 1595.61 BogoMIPS (lpj=797808)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff 00000000 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I cache: 16K, L1 D cache: 16K
>CPU: L2 cache: 256K
>CPU: After all inits, caps: 0383f1ff 00000000 00000000 00000040 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e00)
>CPU0: Intel Pentium III (Coppermine) stepping 03
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time: 20:03:40  Date: 04/29/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfda95, last bus=2
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH4 GPIO
>Boot video device is 0000:02:00.0
>PCI: Firmware left 0000:01:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11 12) *0, disabled.
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 *11 12)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11 12)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 15 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0e: iomem range 0x100000-0x1fffffff could not be reserved
>pnp: 00:0e: iomem range 0x0-0x0 could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fca00000-feafffff
>  PREFETCH window: f0700000-f47fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fc900000-fc9fffff
>  PREFETCH window: f0600000-f06fffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3065k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1180469020.632:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel i815 Chipset.
>agpgart: AGP aperture is 64M @ 0xf8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:807:94
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:1f.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>uhci_hcd 0000:00:1f.2: UHCI Host Controller
>uhci_hcd 0000:00:1f.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1f.2: irq 11, io base 0x0000ef40
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.4[C] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.4 to 64
>uhci_hcd 0000:00:1f.4: UHCI Host Controller
>uhci_hcd 0000:00:1f.4: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1f.4: irq 11, io base 0x0000ef80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>BUG: soft lockup detected on CPU#0!
> [<c0451f3e>] softlockup_tick+0xa5/0xb4
> [<c042e930>] update_process_times+0x3b/0x5e
> [<c043d2bd>] tick_sched_timer+0x78/0xbb
> [<c0439df5>] hrtimer_interrupt+0x12b/0x1b6
> [<c043d245>] tick_sched_timer+0x0/0xbb
> [<c0408534>] timer_interrupt+0x2c/0x32
> [<c04521aa>] handle_IRQ_event+0x1a/0x3f
> [<c04535ea>] handle_level_irq+0x81/0xc7
> [<c0453569>] handle_level_irq+0x0/0xc7
> [<c04072bb>] do_IRQ+0xac/0xd1
> [<c04058ff>] common_interrupt+0x23/0x28
> [<c04f007b>] pci_driver_attr_show+0x35/0x3c
> [<c060171d>] _spin_unlock_irqrestore+0x8/0x9
> [<c0539b23>] hide_cursor+0x21/0x5d
> [<c053b8a4>] do_con_write+0xf5/0x153e
> [<c053cd14>] con_put_char+0x27/0x2a
> [<c0532355>] opost+0x17c/0x192
> [<c0532d8c>] n_tty_receive_buf+0x276/0xcc9
> [<c042e748>] lock_timer_base+0x19/0x35
> [<c052f3d7>] flush_to_ldisc+0x121/0x179
> [<c0420a23>] __wake_up+0x32/0x43
> [<c0433e3b>] run_workqueue+0x85/0x125
> [<c042f284>] do_sigaction+0x10f/0x14a
> [<c052f2b6>] flush_to_ldisc+0x0/0x179
> [<c04347cd>] worker_thread+0xf9/0x124
> [<c042229f>] default_wake_function+0x0/0xc
> [<c04346d4>] worker_thread+0x0/0x124
> [<c0436da8>] kthread+0xb0/0xd8
> [<c0436cf8>] kthread+0x0/0xd8
> [<c0405b3f>] kernel_thread_helper+0x7/0x10
> =======================
>Clocksource tsc unstable (delta = 9371137569 ns)
>Time: acpi_pm clocksource has been installed.
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  1620.000 MB/sec
>raid5: using function: pIII_sse (1620.000 MB/sec)
>raid6: int32x1    210 MB/s
>raid6: int32x2    222 MB/s
>raid6: int32x4    246 MB/s
>raid6: int32x8    234 MB/s
>raid6: mmxx1      617 MB/s
>raid6: mmxx2      769 MB/s
>raid6: sse1x1     621 MB/s
>raid6: sse1x2     808 MB/s
>raid6: using algorithm sse1x2 (808 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>usb 1-1: new low speed USB device using uhci_hcd and address 2
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi0 : ata_piix
>usb 1-1: configuration #1 chosen from 1 choice
>input: Logitech Optical USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1f.2-1
>ata1.00: ata_hpa_resize 1: sectors = 80043264, hpa_sectors = 80043264
>ata1.00: ATA-6: Maxtor 5T040H4, TAH71DP0, max UDMA/100
>ata1.00: 80043264 sectors, multi 16: LBA 
>ata1.01: ata_hpa_resize 1: sectors = 29336832, hpa_sectors = 29336832
>ata1.01: ATA-5: QUANTUM FIREBALLP LM15, A35.0700, max UDMA/66
>ata1.01: 29336832 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 80043264, hpa_sectors = 80043264
>ata1.00: configured for UDMA/33
>ata1.01: ata_hpa_resize 1: sectors = 29336832, hpa_sectors = 29336832
>ata1.01: configured for UDMA/33
>scsi1 : ata_piix
>ata2.00: ata_hpa_resize 1: sectors = 80043264, hpa_sectors = 80043264
>ata2.00: ATA-6: Maxtor 5T040H4, TAH71DP0, max UDMA/100
>ata2.00: 80043264 sectors, multi 16: LBA 
>ata2.01: ATAPI, max MWDMA2
>ata2.00: ata_hpa_resize 1: sectors = 80043264, hpa_sectors = 80043264
>ata2.00: configured for UDMA/33
>ata2.01: configured for MWDMA2
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 5T040H4   TAH7 PQ: 0 ANSI: 5
>SCSI device sda: 80043264 512-byte hdwr sectors (40982 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 80043264 512-byte hdwr sectors (40982 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 0:0:1:0: Direct-Access     ATA      QUANTUM FIREBALL A35. PQ: 0 ANSI: 5
>SCSI device sdb: 29336832 512-byte hdwr sectors (15020 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 29336832 512-byte hdwr sectors (15020 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 0:0:1:0: Attached scsi disk sdb
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 5T040H4   TAH7 PQ: 0 ANSI: 5
>SCSI device sdc: 80043264 512-byte hdwr sectors (40982 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdc: 80043264 512-byte hdwr sectors (40982 MB)
>sdc: Write Protect is off
>sdc: Mode Sense: 00 3a 00 00
>SCSI device sdc: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdc: sdc1 sdc2
>sd 1:0:0:0: Attached scsi disk sdc
>scsi 1:0:1:0: CD-ROM            PLEXTOR  CD-R   PX-W8432T 1.09 PQ: 0 ANSI: 5
>ACPI: PCI Interrupt Link [LNKF] enabled at IRQ 9
>PCI: setting IRQ 9 as level-triggered
>ACPI: PCI Interrupt 0000:01:09.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
>sym0: <810a> rev 0x23 at pci 0000:01:09.0 irq 9
>sym0: Symbios NVRAM, ID 7, Fast-10, SE, parity checking
>sym0: open drain IRQ line driver
>sym0: using LOAD/STORE-based firmware.
>sym0: SCSI BUS has been reset.
>scsi2 : sym-2.2.3
>scsi: waiting for bus probes to complete ...
>scsi 2:0:4:0: Sequential-Access ARCHIVE  Python 04106-XXX 743B PQ: 0 ANSI: 2
> target2:0:4: Beginning Domain Validation
> target2:0:4: asynchronous
> target2:0:4: FAST-10 SCSI 10.0 MB/s ST (100 ns, offset 8)
> target2:0:4: Domain Validation skipping write tests
> target2:0:4: Ending Domain Validation
>md: md1 stopped.
>md: bind<sdc2>
>md: bind<sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with journal data mode.
>audit(1180469045.105:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
>security:  60 classes, 65638 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev md1, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1180469046.105:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 0:0:1:0: Attached scsi generic sg1 type 0
>sd 1:0:0:0: Attached scsi generic sg2 type 0
>scsi 1:0:1:0: Attached scsi generic sg3 type 5
>scsi 2:0:4:0: Attached scsi generic sg4 type 1
>st: Version 20070203, fixed bufsize 32768, s/g segs 256
>st 2:0:4:0: Attached scsi tape st0
>st 2:0:4:0: st0: try direct i/o: yes (alignment 512 B)
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:1:0: Attached scsi CD-ROM sr0
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xfc9fd000, irq 11, MAC addr 00:D0:B7:C0:DE:AB
>winbond-840.c:v1.01-e (2.4 port) Sep-11-2006  Donald Becker <becker@scyld.com>
>  http://www.scyld.com/network/drivers.html
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:01:0a.0[A] -> Link [LNKG] -> GSI 11 (level, low) -> IRQ 11
>eth1: Winbond W89c840 at e08f8c00, 00:00:e8:22:42:82, IRQ 11.
>eth1: MII PHY 0181b802h found at address 1, status 0x7809 advertising 05e1.
>ACPI: PCI Interrupt 0000:01:0b.0[A] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11
>eth2: Winbond W89c840 at e08fa000, 00:00:e8:21:75:ae, IRQ 11.
>eth2: MII PHY 0181b802h found at address 1, status 0x7809 advertising 05e1.
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:01:0c.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>eth3: Winbond W89c840 at e090e400, 00:00:e8:21:3f:b4, IRQ 10.
>eth3: MII PHY 0181b802h found at address 1, status 0x7809 advertising 05e1.
>ACPI: PCI Interrupt 0000:01:0d.0[A] -> Link [LNKF] -> GSI 9 (level, low) -> IRQ 9
>eth4: Winbond W89c840 at e0950800, 00:00:e8:21:f5:e3, IRQ 9.
>eth4: MII PHY 0181b802h found at address 1, status 0x7809 advertising 05e1.
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware
>iTCO_wdt: No card detected
>intel_rng: Firmware space is locked read-only. If you can't or
>intel_rng: don't want to disable this in firmware setup, and if
>intel_rng: you are certain that your system has a functional
>intel_rng: RNG, try using the 'no_fwh_detect' option.
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>input: PC Speaker as /class/input/input3
>gameport: NS558 PnP Gameport is pnp00:09/gameport0, io 0x201, speed 852kHz
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>intel8x0_measure_ac97_clock: measured 50744 usecs
>intel8x0: clocking to 48000
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SBTN]
>ibm_acpi: ec object not found
>md: md0 stopped.
>md: bind<sdc1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sdb2, internal journal
>EXT3-fs: mounted filesystem with journal data mode.
>SELinux: initialized (dev sdb2, type ext3), uses xattr
>Adding 1052216k swap on /dev/sdb1.  Priority:-1 extents:1 across:1052216k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts

Actions: View

Attachments on bug 241724: 155625 | 155626