Attachment 155680 Details for Bug 239415 – what's the difference in results?

[patch] what's the difference in results?

logs.diff (text/plain), 21.45 KB, created by Matěj Cepl on 2007-05-30 13:32:13 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matěj Cepl

Created: 2007-05-30 13:32:13 UTC

Size: 21.45 KB

patch

obsolete

>--- Xorg-bad.log	2007-05-08 11:43:39.000000000 +0200
>+++ Xorg-good.log	2007-05-08 11:45:06.000000000 +0200
>@@ -12,8 +12,23 @@
> Markers: (--) probed, (**) from config file, (==) default setting,
> 	(++) from command line, (!!) notice, (II) informational,
> 	(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
>-(==) Log file: "/var/log/Xorg.1.log", Time: Tue May  8 11:42:57 2007
>-(EE) Unable to locate/open config file: "./xorg-bad.conf"
>+(==) Log file: "/var/log/Xorg.0.log", Time: Tue May  8 11:15:35 2007
>+(==) Using config file: "/etc/X11/xorg.conf"
>+(==) ServerLayout "Default Layout"
>+(**) |-->Screen "Screen0" (0)
>+(**) |   |-->Monitor "Monitor0"
>+(**) |   |-->Device "Videocard0"
>+(**) |-->Input Device "Keyboard0"
>+(**) |-->Input Device "Synaptics"
>+(II) No default mouse found, adding one
>+(**) |-->Input Device "<default pointer>"
>+(WW) No FontPath specified.  Using compiled-in default.
>+(==) FontPath set to:
>+	unix/:7100,
>+	built-ins
>+(==) RgbPath set to "/usr/share/X11/rgb"
>+(==) ModulePath set to "/usr/lib/xorg/modules"
>+(II) Open ACPI successful (/var/run/acpid.socket)
> (II) Module ABI versions:
> 	X.Org ANSI C Emulation: 0.3
> 	X.Org Video Driver: 1.0
>@@ -33,7 +48,7 @@
> (II) Module pcidata: vendor="X.Org Foundation"
> 	compiled for 7.1.1, module version = 1.0.0
> 	ABI class: X.Org Video Driver, version 1.0
>-(--) using VT number 8
>+(++) using VT number 7
> 
> (II) PCI: PCI scan (all values are in hex)
> (II) PCI: 00:00:0: chip 1106,3205 card 1106,7205 rev 00 class 06,00,00 hdr 00
>@@ -77,91 +92,6 @@
> (II) PCI-to-ISA bridge:
> (II) Bus -1: bridge is at (0:17:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
> (--) PCI:*(1:0:0) unknown vendor (0x1106) unknown chipset (0x7205) rev 1, Mem @ 0xf0000000/26, 0xd1000000/24
>-New driver is "via"
>-(==) Using default built-in configuration (55 lines)
>-(==) --- Start of built-in configuration ---
>-	Section "Module"
>-		Load	"extmod"
>-		Load	"dbe"
>-		Load	"glx"
>-		Load	"freetype"
>-		Load	"type1"
>-		Load	"record"
>-		Load	"dri"
>-	EndSection
>-	Section "Monitor"
>-		Identifier	"Builtin Default Monitor"
>-	EndSection
>-	Section "Device"
>-		Identifier	"Builtin Default via Device 0"
>-		Driver	"via"
>-	EndSection
>-	Section "Screen"
>-		Identifier	"Builtin Default via Screen 0"
>-		Device	"Builtin Default via Device 0"
>-		Monitor	"Builtin Default Monitor"
>-	EndSection
>-	Section "Device"
>-		Identifier	"Builtin Default fbdev Device 0"
>-		Driver	"fbdev"
>-	EndSection
>-	Section "Screen"
>-		Identifier	"Builtin Default fbdev Screen 0"
>-		Device	"Builtin Default fbdev Device 0"
>-		Monitor	"Builtin Default Monitor"
>-	EndSection
>-	Section "Device"
>-		Identifier	"Builtin Default vesa Device 0"
>-		Driver	"vesa"
>-	EndSection
>-	Section "Screen"
>-		Identifier	"Builtin Default vesa Screen 0"
>-		Device	"Builtin Default vesa Device 0"
>-		Monitor	"Builtin Default Monitor"
>-	EndSection
>-	Section "Device"
>-		Identifier	"Builtin Default vga Device 0"
>-		Driver	"vga"
>-	EndSection
>-	Section "Screen"
>-		Identifier	"Builtin Default vga Screen 0"
>-		Device	"Builtin Default vga Device 0"
>-		Monitor	"Builtin Default Monitor"
>-	EndSection
>-	Section "ServerLayout"
>-		Identifier	"Builtin Default Layout"
>-		Screen	"Builtin Default via Screen 0"
>-		Screen	"Builtin Default fbdev Screen 0"
>-		Screen	"Builtin Default vesa Screen 0"
>-		Screen	"Builtin Default vga Screen 0"
>-	EndSection
>-(==) --- End of built-in configuration ---
>-(==) ServerLayout "Builtin Default Layout"
>-(**) |-->Screen "Builtin Default via Screen 0" (0)
>-(**) |   |-->Monitor "Builtin Default Monitor"
>-(**) |   |-->Device "Builtin Default via Device 0"
>-(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
>-(**) |   |-->Monitor "Builtin Default Monitor"
>-(**) |   |-->Device "Builtin Default fbdev Device 0"
>-(**) |-->Screen "Builtin Default vesa Screen 0" (2)
>-(**) |   |-->Monitor "Builtin Default Monitor"
>-(**) |   |-->Device "Builtin Default vesa Device 0"
>-(**) |-->Screen "Builtin Default vga Screen 0" (3)
>-(**) |   |-->Monitor "Builtin Default Monitor"
>-(**) |   |-->Device "Builtin Default vga Device 0"
>-(==) |-->Input Device "<default pointer>"
>-(==) |-->Input Device "<default keyboard>"
>-(WW) The core pointer device wasn't specified explicitly in the layout.
>-	Using the default mouse configuration.
>-(WW) The core keyboard device wasn't specified explicitly in the layout.
>-	Using the default keyboard configuration.
>-(WW) No FontPath specified.  Using compiled-in default.
>-(==) FontPath set to:
>-	unix/:7100,
>-	built-ins
>-(==) RgbPath set to "/usr/share/X11/rgb"
>-(==) ModulePath set to "/usr/lib/xorg/modules"
>-(II) Open ACPI successful (/var/run/acpid.socket)
> (II) Addressable bus resource ranges are
> 	[0] -1	0	0x00000000 - 0xffffffff (0x0) MX[B]
> 	[1] -1	0	0x00000000 - 0x0000ffff (0x10000) IX[B]
>@@ -305,40 +235,26 @@
> 	compiled for 7.1.1, module version = 0.2.1
> 	Module class: X.Org Video Driver
> 	ABI class: X.Org Video Driver, version 1.0
>-(II) LoadModule: "fbdev"
>-(II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
>-(II) Module fbdev: vendor="X.Org Foundation"
>-	compiled for 7.1.1, module version = 0.3.0
>-	ABI class: X.Org Video Driver, version 1.0
>-(II) LoadModule: "vesa"
>-(II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
>-(II) Module vesa: vendor="X.Org Foundation"
>-	compiled for 7.1.1, module version = 1.2.0
>-	Module class: X.Org Video Driver
>-	ABI class: X.Org Video Driver, version 1.0
>-(II) LoadModule: "vga"
>-(II) Loading /usr/lib/xorg/modules/drivers/vga_drv.so
>-(II) Module vga: vendor="X.Org Foundation"
>-	compiled for 7.1.1, module version = 4.1.0
>-	Module class: X.Org Video Driver
>-	ABI class: X.Org Video Driver, version 1.0
>-(II) LoadModule: "mouse"
>-(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
>-(II) Module mouse: vendor="X.Org Foundation"
>-	compiled for 7.1.1, module version = 1.1.1
>-	Module class: X.Org XInput Driver
>-	ABI class: X.Org XInput driver, version 0.6
> (II) LoadModule: "kbd"
> (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> 	compiled for 7.1.1, module version = 1.1.0
> 	Module class: X.Org XInput Driver
> 	ABI class: X.Org XInput driver, version 0.6
>+(II) LoadModule: "synaptics"
>+(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
>+(II) Module synaptics: vendor="X.Org Foundation"
>+	compiled for 4.3.99.902, module version = 1.0.0
>+	Module class: X.Org XInput Driver
>+	ABI class: X.Org XInput driver, version 0.6
>+(II) LoadModule: "mouse"
>+(II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
>+(II) Module mouse: vendor="X.Org Foundation"
>+	compiled for 7.1.1, module version = 1.1.1
>+	Module class: X.Org XInput Driver
>+	ABI class: X.Org XInput driver, version 0.6
> (II) VIA: driver for VIA chipsets: CLE266, KM400/KN400, K8M800,
> 	PM800/PM880/CN400
>-(II) FBDEV: driver for framebuffer: fbdev
>-(II) VESA: driver for VESA chipsets: vesa
>-(II) VGA: Generic VGA driver (version 4.1) for chipsets: generic
> (II) Primary Device is: PCI 01:00:0
> (--) Assigning device section with no busID to primary device
> (--) Chipset KM400/KN400 found
>@@ -365,17 +281,6 @@
> 	[17] -1	0	0x00001c40 - 0x00001c5f (0x20) IX[B]
> 	[18] -1	0	0x00001c20 - 0x00001c3f (0x20) IX[B]
> 	[19] -1	0	0x00001c00 - 0x00001c1f (0x20) IX[B]
>-(II) Loading sub module "fbdevhw"
>-(II) LoadModule: "fbdevhw"
>-(II) Loading /usr/lib/xorg/modules/linux/libfbdevhw.so
>-(II) Module fbdevhw: vendor="X.Org Foundation"
>-	compiled for 7.1.1, module version = 0.0.2
>-	ABI class: X.Org Video Driver, version 1.0
>-(EE) open /dev/fb0: No such file or directory
>-(--) Assigning device section with no busID to primary device
>-(--) Chipset vesa found
>-(--) Assigning device section with no busID to primary device
>-(--) Chipset generic found
> (II) resource ranges after probing:
> 	[0] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> 	[1] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>@@ -409,9 +314,7 @@
> (II) Module vgahw: vendor="X.Org Foundation"
> 	compiled for 7.1.1, module version = 0.1.0
> 	ABI class: X.Org Video Driver, version 1.0
>-(II) VIA(0): Creating default Display subsection in Screen section
>-	"Builtin Default via Screen 0" for depth/fbbpp 24/32
>-(==) VIA(0): Depth 24, (==) framebuffer bpp 32
>+(**) VIA(0): Depth 24, (--) framebuffer bpp 32
> (==) VIA(0): RGB weight 888
> (==) VIA(0): Default visual is TrueColor
> (==) VIA(0): Using XAA acceleration architecture
>@@ -443,9 +346,8 @@
> (II) VIA(0): I2C device "I2C bus 1:ddc2" removed.
> (II) VIA(0): Enabling panel from PCI-Subsystem Id information.
> (WW) VIA(0): This device is supposed to have a TV encoder but we are unable to detect it (support missing?).
>-(II) VIA(0): Builtin Default Monitor: Using default hsync range of 31.50-37.90 kHz
>-(II) VIA(0): Builtin Default Monitor: Using default vrefresh range of 50.00-70.00 Hz
>-(WW) VIA(0): Unable to estimate virtual size
>+(II) VIA(0): Monitor0: Using hsync range of 0.00-200.00 kHz
>+(II) VIA(0): Monitor0: Using vrefresh range of 0.00-200.00 Hz
> (II) VIA(0): Clock range:  20.00 to 230.00 MHz
> (II) VIA(0): I2C device "I2C bus 2:ddc2" registered at address 0xA0.
> (II) VIA(0): I2C device "I2C bus 2:ddc2" removed.
>@@ -715,7 +617,6 @@
> (II) VIA(0): Not using default mode "640x480" (unknown reason)
> (II) VIA(0): ViaPanelGetIndex: Non-nativeresolutions are broken.
> (II) VIA(0): Not using default mode "800x600" (unknown reason)
>-(II) VIA(0): Not using default mode "1024x768" (hsync out of range)
> (II) VIA(0): ViaPanelGetIndex: Non-nativeresolutions are broken.
> (II) VIA(0): Not using default mode "1152x864" (unknown reason)
> (II) VIA(0): ViaPanelGetIndex: Non-nativeresolutions are broken.
>@@ -742,16 +643,250 @@
> (II) VIA(0): Not using default mode "1024x576" (unknown reason)
> (II) VIA(0): ViaPanelGetIndex: Mode not supported by Panel.
> (II) VIA(0): Not using driver mode "1024x768" (unknown reason)
>-(WW) VIA(0): Mode pool is empty
>-(EE) VIA(0): No valid modes found
>-(II) UnloadModule: "via"
>-(II) UnloadModule: "ddc"
>-(II) Unloading /usr/lib/xorg/modules/libddc.so
>-(II) UnloadModule: "i2c"
>-(II) Unloading /usr/lib/xorg/modules/libi2c.so
>-(II) UnloadModule: "vgahw"
>-(II) Unloading /usr/lib/xorg/modules/libvgahw.so
>-(EE) Screen(s) found, but none have a usable configuration.
>-
>-Fatal server error:
>-no screens found
>+(--) VIA(0): Virtual size is 1024x768 (pitch 1024)
>+(**) VIA(0): *Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
>+(II) VIA(0): Modeline "1024x768"   65.03  1024 1048 1184 1344  768 770 776 806 -hsync -vsync
>+(**) VIA(0): Display dimensions: (310, 230) mm
>+(**) VIA(0): DPI set to (83, 84)
>+(II) Loading sub module "fb"
>+(II) LoadModule: "fb"
>+(II) Loading /usr/lib/xorg/modules/libfb.so
>+(II) Module fb: vendor="X.Org Foundation"
>+	compiled for 7.1.1, module version = 1.0.0
>+	ABI class: X.Org ANSI C Emulation, version 0.3
>+(II) Loading sub module "xaa"
>+(II) LoadModule: "xaa"
>+(II) Loading /usr/lib/xorg/modules/libxaa.so
>+(II) Module xaa: vendor="X.Org Foundation"
>+	compiled for 7.1.1, module version = 1.2.0
>+	ABI class: X.Org Video Driver, version 1.0
>+(II) Loading sub module "ramdac"
>+(II) LoadModule: "ramdac"
>+(II) Loading /usr/lib/xorg/modules/libramdac.so
>+(II) Module ramdac: vendor="X.Org Foundation"
>+	compiled for 7.1.1, module version = 0.1.0
>+	ABI class: X.Org Video Driver, version 1.0
>+(--) Depth 24 pixmap format is 32 bpp
>+(II) do I need RAC?  No, I don't.
>+(II) resource ranges after preInit:
>+	[0] 0	0	0xd1000000 - 0xd1ffffff (0x1000000) MS[B]
>+	[1] 0	0	0xf0000000 - 0xf3ffffff (0x4000000) MS[B]
>+	[2] -1	0	0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
>+	[3] -1	0	0x000f0000 - 0x000fffff (0x10000) MX[B]
>+	[4] -1	0	0x000c0000 - 0x000effff (0x30000) MX[B]
>+	[5] -1	0	0x00000000 - 0x0009ffff (0xa0000) MX[B]
>+	[6] -1	0	0xd0004c00 - 0xd0004cff (0x100) MX[B]
>+	[7] -1	0	0xd0004800 - 0xd00048ff (0x100) MX[B]
>+	[8] -1	0	0xd0000000 - 0xd0003fff (0x4000) MX[B]
>+	[9] -1	0	0xd0004000 - 0xd00047ff (0x800) MX[B]
>+	[10] -1	0	0xe0000000 - 0xdfffffff (0x0) MX[B]O
>+	[11] -1	0	0xd1000000 - 0xd1ffffff (0x1000000) MX[B](B)
>+	[12] -1	0	0xf0000000 - 0xf3ffffff (0x4000000) MX[B](B)
>+	[13] 0	0	0x000a0000 - 0x000affff (0x10000) MS[B]
>+	[14] 0	0	0x000b0000 - 0x000b7fff (0x8000) MS[B]
>+	[15] 0	0	0x000b8000 - 0x000bffff (0x8000) MS[B]
>+	[16] -1	0	0x0000ffff - 0x0000ffff (0x1) IX[B]
>+	[17] -1	0	0x00000000 - 0x000000ff (0x100) IX[B]
>+	[18] -1	0	0x00001800 - 0x000018ff (0x100) IX[B]
>+	[19] -1	0	0x00001400 - 0x000014ff (0x100) IX[B]
>+	[20] -1	0	0x00001000 - 0x000010ff (0x100) IX[B]
>+	[21] -1	0	0x00001c60 - 0x00001c6f (0x10) IX[B]
>+	[22] -1	0	0x00001c40 - 0x00001c5f (0x20) IX[B]
>+	[23] -1	0	0x00001c20 - 0x00001c3f (0x20) IX[B]
>+	[24] -1	0	0x00001c00 - 0x00001c1f (0x20) IX[B]
>+	[25] 0	0	0x000003b0 - 0x000003bb (0xc) IS[B]
>+	[26] 0	0	0x000003c0 - 0x000003df (0x20) IS[B]
>+(--) VIA(0): mapping framebuffer @ 0xf0000000 with size 0x4000000
>+(==) VIA(0): Write-combining range (0xf0000000,0x4000000)
>+(--) VIA(0): Frame buffer start: 0xb3f13000, free start: 0x300000 end: 0x4000000
>+(--) VIA(0): mapping MMIO @ 0xd1000000 with size 0x9000
>+(--) VIA(0): mapping BitBlt MMIO @ 0xd1200000 with size 0x10000
>+(II) VIA(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
>+(II) VIA(0): 3D Engine has been initialized.
>+drmOpenDevice: node name is /dev/dri/card0
>+drmOpenDevice: open result is -1, (No such device or address)
>+drmOpenDevice: open result is -1, (No such device or address)
>+drmOpenDevice: Open failed
>+drmOpenDevice: node name is /dev/dri/card0
>+drmOpenDevice: open result is -1, (No such device or address)
>+drmOpenDevice: open result is -1, (No such device or address)
>+drmOpenDevice: Open failed
>+drmOpenByBusid: Searching for BusID PCI:1:0:0
>+drmOpenDevice: node name is /dev/dri/card0
>+drmOpenDevice: open result is 7, (OK)
>+drmOpenByBusid: drmOpenMinor returns 7
>+drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>+(II) VIA(0): [drm] loaded kernel module for "via" driver
>+(II) VIA(0): [drm] DRM interface version 1.3
>+(II) VIA(0): [drm] created "via" driver at busid "PCI:1:0:0"
>+(II) VIA(0): [drm] added 8192 byte SAREA at 0xeccdb000
>+(II) VIA(0): [drm] mapped SAREA 0xeccdb000 to 0xb7f1c000
>+(II) VIA(0): [drm] framebuffer handle = 0xf0000000
>+(II) VIA(0): [drm] added 1 reserved context for kernel
>+(II) VIA(0): [dri] visual configs initialized.
>+(II) VIA(0): [drm] register handle = 0xd1000000
>+(II) VIA(0): [drm] framebuffer handle = 0xf0000000
>+(II) VIA(0): [drm] mmio Registers = 0xd1000000
>+(II) VIA(0): [dri] mmio mapped.
>+(II) VIA(0): VIAInternalScreenInit
>+(II) VIA(0): Using XFree86 Acceleration Architecture (XAA)
>+	Screen to screen bit blits
>+	Solid filled rectangles
>+	8x8 mono pattern filled rectangles
>+	8x8 color pattern filled rectangles
>+	Solid Lines
>+	Dashed Lines
>+	Image Writes
>+	Offscreen Pixmaps
>+	Setting up tile and stipple cache:
>+		31 128x128 slots
>+		12 256x256 slots
>+		4 512x512 slots
>+		32 8x8 color pattern slots
>+(==) VIA(0): Backing store disabled
>+(II) VIA(0): [drm] Detected AGP vendor 0x1106, device 0x3205
>+(II) VIA(0): [drm] Didn't find any AGP v3 compatible device. Trying AGP 4X mode.
>+(II) VIA(0): [drm] Trying to enable AGP fast writes.
>+(II) VIA(0): [drm] drmAgpEnabled succeeded
>+(II) VIA(0): [drm] agpAddr = 0xe0000000
>+(II) VIA(0): [drm] agpBase = (nil)
>+(II) VIA(0): [drm] agpAddr = 0xe0000000
>+(II) VIA(0): [drm] agpSize = 0x01e00000
>+(II) VIA(0): [drm] agp physical addr = 0x00000000
>+(II) VIA(0): [dri] use agp.
>+(II) VIA(0): [drm] Using 54251488 bytes for DRM memory heap.
>+(II) VIA(0): [dri] frame buffer initialized.
>+(II) VIA(0): X context handle = 0x1
>+(II) VIA(0): [drm] installed DRM signal handler
>+(II) VIA(0): [DRI] installation complete
>+(II) VIA(0): [dri] kernel data initialized.
>+(II) VIA(0): [drm] Irq handler installed, using IRQ 4.
>+(II) VIA(0): direct rendering enabled
>+(II) VIA(0): [Xv] Using PCI DMA for Xv image transfer.
>+(II) VIA(0): Benchmarking video copy. Less is better.
>+(--) VIA(0): Timed   libc YUV420 copy... 23283449. Throughput: 10505823.6 MiB/s.
>+(--) VIA(0): Timed kernel YUV420 copy... 23071716. Throughput: 10602237.3 MiB/s.
>+(--) VIA(0): Timed    SSE YUV420 copy... 23069837. Throughput: 10603100.9 MiB/s.
>+(--) VIA(0): Timed    MMX YUV420 copy... 23210735. Throughput: 10538736.0 MiB/s.
>+(--) VIA(0): Timed 3DNow! YUV420 copy... 23065685. Throughput: 10605009.5 MiB/s.
>+(--) VIA(0): Timed   MMX2 YUV420 copy... 23073701. Throughput: 10601325.3 MiB/s.
>+(--) VIA(0): Using 3DNow! YUV42X copy for video.
>+(WW) VIA(0): [XvMC] Not supported on this chipset.
>+(==) RandR enabled
>+(II) Setting vga for screen 0.
>+(II) Initializing built-in extension MIT-SHM
>+(II) Initializing built-in extension XInputExtension
>+(II) Initializing built-in extension XTEST
>+(II) Initializing built-in extension XKEYBOARD
>+(II) Initializing built-in extension XC-APPGROUP
>+(II) Initializing built-in extension SECURITY
>+(II) Initializing built-in extension XINERAMA
>+(II) Initializing built-in extension XFIXES
>+(II) Initializing built-in extension XFree86-Bigfont
>+(II) Initializing built-in extension RENDER
>+(II) Initializing built-in extension RANDR
>+(II) Initializing built-in extension COMPOSITE
>+(II) Initializing built-in extension DAMAGE
>+(II) Initializing built-in extension XEVIE
>+drmOpenDevice: node name is /dev/dri/card0
>+drmOpenDevice: open result is 8, (OK)
>+drmOpenByBusid: Searching for BusID PCI:1:0:0
>+drmOpenDevice: node name is /dev/dri/card0
>+drmOpenDevice: open result is 8, (OK)
>+drmOpenByBusid: drmOpenMinor returns 8
>+drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
>+(WW) AIGLX: 3D driver claims to not support visual 0x22
>+(WW) AIGLX: 3D driver claims to not support visual 0x23
>+(WW) AIGLX: 3D driver claims to not support visual 0x24
>+(WW) AIGLX: 3D driver claims to not support visual 0x25
>+(WW) AIGLX: 3D driver claims to not support visual 0x26
>+(WW) AIGLX: 3D driver claims to not support visual 0x27
>+(WW) AIGLX: 3D driver claims to not support visual 0x28
>+(WW) AIGLX: 3D driver claims to not support visual 0x29
>+(WW) AIGLX: 3D driver claims to not support visual 0x2a
>+(WW) AIGLX: 3D driver claims to not support visual 0x2b
>+(WW) AIGLX: 3D driver claims to not support visual 0x2c
>+(WW) AIGLX: 3D driver claims to not support visual 0x2d
>+(II) AIGLX: Loaded and initialized /usr/lib/dri/unichrome_dri.so
>+(II) GLX: Initialized DRI GL provider for screen 0
>+(**) Option "CoreKeyboard"
>+(**) Keyboard0: Core Keyboard
>+(**) Option "Protocol" "standard"
>+(**) Keyboard0: Protocol: standard
>+(**) Option "AutoRepeat" "500 30"
>+(**) Option "XkbRules" "xorg"
>+(**) Keyboard0: XkbRules: "xorg"
>+(**) Option "XkbModel" "pc105"
>+(**) Keyboard0: XkbModel: "pc105"
>+(**) Option "XkbLayout" "us"
>+(**) Keyboard0: XkbLayout: "us"
>+(**) Option "CustomKeycodes" "off"
>+(**) Keyboard0: CustomKeycodes disabled
>+(II) Synaptics touchpad driver version 0.14.4 (1404)
>+(--) Synaptics auto-dev sets device to /dev/input/event2
>+(**) Option "Device" "/dev/input/event2"
>+(--) Synaptics touchpad found
>+(**) Option "CorePointer"
>+(**) Synaptics: Core Pointer
>+(WW) <default pointer>: No Device specified, looking for one...
>+(II) <default pointer>: Setting Device option to "/dev/input/mice"
>+(--) <default pointer>: Device: "/dev/input/mice"
>+(==) <default pointer>: Protocol: "Auto"
>+(**) Option "AlwaysCore"
>+(**) <default pointer>: always reports core events
>+(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
>+(**) <default pointer>: ZAxisMapping: buttons 4 and 5
>+(**) <default pointer>: Buttons: 9
>+(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
>+(II) XINPUT: Adding extended input device "Synaptics" (type: MOUSE)
>+(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
>+Synaptics DeviceInit called
>+SynapticsCtrl called.
>+Synaptics DeviceOn called
>+(--) Synaptics auto-dev sets device to /dev/input/event2
>+(**) Option "Device" "/dev/input/event2"
>+(--) Synaptics touchpad found
>+(--) <default pointer>: PnP-detected protocol: "ExplorerPS/2"
>+(II) <default pointer>: ps2EnableDataReporting: succeeded
>+Warning: font renderer for ".pcf" already registered at priority 0
>+Warning: font renderer for ".pcf.Z" already registered at priority 0
>+Warning: font renderer for ".pcf.gz" already registered at priority 0
>+Warning: font renderer for ".snf" already registered at priority 0
>+Warning: font renderer for ".snf.Z" already registered at priority 0
>+Warning: font renderer for ".snf.gz" already registered at priority 0
>+Warning: font renderer for ".bdf" already registered at priority 0
>+Warning: font renderer for ".bdf.Z" already registered at priority 0
>+Warning: font renderer for ".bdf.gz" already registered at priority 0
>+Warning: font renderer for ".pmf" already registered at priority 0
>+ProcXCloseDevice to close or not ?
>+SynapticsCtrl called.
>+SynapticsCtrl called.
>+(II) 3rd Button detected: disabling emulate3Button
>+Synaptics DeviceOff called
>+(II) AIGLX: Suspending AIGLX clients for VT switch
>+(II) Open ACPI successful (/var/run/acpid.socket)
>+(II) AIGLX: Resuming AIGLX clients after VT switch
>+(II) <default pointer>: ps2EnableDataReporting: succeeded
>+Synaptics DeviceOn called
>+(--) Synaptics auto-dev sets device to /dev/input/event2
>+(**) Option "Device" "/dev/input/event2"
>+(--) Synaptics touchpad found
>+Synaptics DeviceOff called
>+(II) AIGLX: Suspending AIGLX clients for VT switch
>+(II) Open ACPI successful (/var/run/acpid.socket)
>+(II) AIGLX: Resuming AIGLX clients after VT switch
>+(II) <default pointer>: ps2EnableDataReporting: succeeded
>+Synaptics DeviceOn called
>+(--) Synaptics auto-dev sets device to /dev/input/event2
>+(**) Option "Device" "/dev/input/event2"
>+(--) Synaptics touchpad found
>+(II) 3rd Button detected: disabling emulate3Button
>+Synaptics DeviceOff called
>+(II) AIGLX: Suspending AIGLX clients for VT switch
>+(II) Open ACPI successful (/var/run/acpid.socket)
>+(II) AIGLX: Resuming AIGLX clients after VT switch
>+(II) <default pointer>: ps2EnableDataReporting: succeeded
>+Synaptics DeviceOn called
>+(--) Synaptics auto-dev sets device to /dev/input/event2
>+(**) Option "Device" "/dev/input/event2"
>+(--) Synaptics touchpad found

Actions: View | Diff

Attachments on bug 239415: 154329 | 155674 | 155675 | 155676 | 155677 | 155679 | 155680