Attachment 155723 Details for Bug 241793 – dmesg

dmesg

dmesg (text/plain), 25.06 KB, created by Richard W.M. Jones on 2007-05-30 18:30:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Richard W.M. Jones

Created: 2007-05-30 18:30:46 UTC

Size: 25.06 KB

patch

obsolete

>Bootdata ok (command line is ro root=/dev/VolGroup00/RHEL5 rhgb quiet)
>Linux version 2.6.18-20.el5xen (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu May 17 20:47:13 EDT 2007
>BIOS-provided physical RAM map:
> Xen: 0000000000000000 - 00000000f3674000 (usable)
>On node 0 totalpages: 996980
>  DMA zone: 996980 pages, LIFO batch:31
>DMI present.
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x00000000000f7b00
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x00000000aff070e8
>ACPI: FADT (v001 NVIDIA CK8S     0x06040000 PTL_ 0x000f4240) @ 0x00000000aff0cce6
>ACPI: SPCR (v001 PTLTD  $UCRTBL$ 0x06040000 PTL  0x00000001) @ 0x00000000aff0cd5a
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0x00000000aff0cdaa
>ACPI: HPET (v001 PTLTD  HPETTBL  0x06040000  LTP 0x00000001) @ 0x00000000aff0cdf6
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x00000000aff0ce2e
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x00000000aff0cec8
>ACPI: SRAT (v001 AMD    HAMMER   0x06040000 AMD  0x00000001) @ 0x00000000aff0cef0
>ACPI: DSDT (v001 NVIDIA      CK8 0x06040000 MSFT 0x0100000e) @ 0x0000000000000000
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, version 17, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x05] address[0xd0000000] gsi_base[24])
>IOAPIC[1]: apic_id 5, version 17, address 0xd0000000, GSI 24-47
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to xen
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at b4000000 (gap: b0000000:30000000)
>Built 1 zonelists.  Total pages: 996980
>Kernel command line: ro root=/dev/VolGroup00/RHEL5 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Xen reported: 2814.430 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Software IO TLB enabled: 
> Aperture:     64 megabytes
> Kernel range: 0xffff880005eec000 - 0xffff880009eec000
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Memory: 3825144k/3987920k available (2321k kernel code, 153852k reserved, 1318k data, 172k init)
>Calibrating delay using timer specific routine.. 7036.74 BogoMIPS (lpj=14073488)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 1024K (64 bytes/line)
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>(SMP-)alternatives turned off
>ACPI: Core revision 20060707
>Initializing CPU#1
>Initializing CPU#2
>Brought up 4 CPUs
>sizeof(vma)=168 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=216 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=96 bytes
>sizeof(skbuff)=240 bytes
>Initializing CPU#3
>migration_cost=373
>checking if image is initramfs... it is
>Grant table initialized
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved
>PCI: Not using MMCONFIG.
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI: Transparent bridge - 0000:00:06.0
>Boot video device is 0000:06:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR2.NECA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.XVR5._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LNK2] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LK1E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LK3E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LK4E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LMA2] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *11
>ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 16 17 18 19 20 21 22 23) *7
>ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *5
>ACPI: PCI Interrupt Link [LSI2] (IRQs 16 17 18 19 20 21 22 23) *10
>ACPI: PCI Root Bridge [PCI1] (0000:80)
>PCI: Probing PCI hardware (bus 80)
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI1.XVR2._PRT]
>ACPI: PCI Interrupt Link [LK1E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LK2E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LK3E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LK4E] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LUS0] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LMA2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LUS2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LPID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LTID] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LSI1] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>ACPI: PCI Interrupt Link [LSI2] (IRQs 40 41 42 43 44 45 46 47) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>xen_mem: Initialising balloon driver.
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:03: ioport range 0x1000-0x107f could not be reserved
>pnp: 00:03: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:03: ioport range 0x1400-0x147f has been reserved
>pnp: 00:03: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:03: ioport range 0x1800-0x187f has been reserved
>pnp: 00:03: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:03: ioport range 0x3440-0x347f has been reserved
>pnp: 00:03: ioport range 0x3400-0x343f has been reserved
>pnp: 00:0f: ioport range 0xf000-0xf07f has been reserved
>pnp: 00:0f: ioport range 0xf080-0xf0ff has been reserved
>pnp: 00:0f: ioport range 0xf400-0xf47f has been reserved
>pnp: 00:0f: ioport range 0xf480-0xf4ff has been reserved
>pnp: 00:0f: ioport range 0xf800-0xf87f has been reserved
>pnp: 00:0f: ioport range 0xf880-0xf8ff has been reserved
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: b0100000-b01fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0a.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:0d.0
>  IO window: disabled.
>  MEM window: b0200000-b02fffff
>  PREFETCH window: disabled.
>PCI: Failed to allocate mem resource #6:20000@d0000000 for 0000:06:00.0
>PCI: Bridge: 0000:00:0f.0
>  IO window: disabled.
>  MEM window: b1000000-b2ffffff
>  PREFETCH window: c0000000-cfffffff
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI Interrupt Link [LK4E] enabled at IRQ 23
>GSI 16 sharing vector 0xA0 and IRQ 16
>ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LK4E] -> GSI 23 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>PCI: Bridge: 0000:80:0d.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Setting latency timer of device 0000:80:0d.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 262144 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x36 set to 0x1
>IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>audit: initializing netlink socket (disabled)
>audit(1180545769.992:1): initialized
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>- Added public key 3440CBEAEE5E7ACC
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0a.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0d.0:pcie00]
>PCI: Setting latency timer of device 0000:00:0f.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:0f.0:pcie00]
>PCI: Setting latency timer of device 0000:80:0d.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:80:0d.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Xen virtual console successfully installed as ttyS0
>Event-channel device installed.
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
>NFORCE-MCP55: chipset revision 161
>NFORCE-MCP55: not 100% native mode: will probe irqs later
>NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
>    ide0: BM-DMA at 0x3480-0x3487, BIOS settings: hda:DMA, hdb:pio
>Probing IDE interface ide0...
>hda: LITE-ON DVDRW LH-18A1P, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Write protecting the kernel read-only data: 440k
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22
>GSI 17 sharing vector 0xA8 and IRQ 17
>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, high) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>ohci_hcd 0000:00:02.0: OHCI Host Controller
>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:02.0: irq 17, io mem 0xb0004000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
>GSI 18 sharing vector 0xB0 and IRQ 18
>ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, high) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:02.1 to 64
>ehci_hcd 0000:00:02.1: EHCI Host Controller
>ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:02.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:02.1
>ehci_hcd 0000:00:02.1: irq 18, io mem 0xb0005000
>ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.00 loaded.
>sata_nv 0000:00:05.0: version 2.0
>ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20
>GSI 19 sharing vector 0xB8 and IRQ 19
>ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [LTID] -> GSI 20 (level, high) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>ata1: SATA max UDMA/133 cmd 0x34D0 ctl 0x34C6 bmdma 0x3490 irq 19
>ata2: SATA max UDMA/133 cmd 0x34C8 ctl 0x34C2 bmdma 0x3498 irq 19
>scsi0 : sata_nv
>ohci_hcd 0000:00:02.0: wakeup
>usb 1-6: new low speed USB device using ohci_hcd and address 2
>usb 1-6: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Optical Mouse as /class/input/input1
>input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-6
>ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>ata1.00: ATA-7, max UDMA/133, 234441648 sectors: LBA48 
>ata1.00: ata1: dev 0 multi count 16
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x34CF
>  Vendor: ATA       Model: WDC WD1200JS-22M  Rev: 02.0
>  Type:   Direct-Access                      ANSI SCSI revision: 05
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
>SCSI device sda: 234441648 512-byte hdwr sectors (120034 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: drive cache: write back
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt Link [LSI1] enabled at IRQ 19
>GSI 20 sharing vector 0xC0 and IRQ 20
>ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [LSI1] -> GSI 19 (level, high) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:05.1 to 64
>ata3: SATA max UDMA/133 cmd 0x34E8 ctl 0x34DE bmdma 0x34A0 irq 20
>ata4: SATA max UDMA/133 cmd 0x34E0 ctl 0x34DA bmdma 0x34A8 irq 20
>scsi2 : sata_nv
>ata3: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x34EF
>scsi3 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x34E7
>ACPI: PCI Interrupt Link [LSI2] enabled at IRQ 18
>GSI 21 sharing vector 0xC8 and IRQ 21
>ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [LSI2] -> GSI 18 (level, high) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:05.2 to 64
>ata5: SATA max UDMA/133 cmd 0x3800 ctl 0x34F6 bmdma 0x34B0 irq 21
>ata6: SATA max UDMA/133 cmd 0x34F8 ctl 0x34F2 bmdma 0x34B8 irq 21
>scsi4 : sata_nv
>ata5: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x3807
>scsi5 : sata_nv
>ata6: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x34FF
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1180545778.724:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
>security:  59 classes, 49762 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1180545779.048:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input2
>EDAC MC: Ver: 2.0.1 May 17 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>EDAC MC1: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:19.2
>shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
>shpchp: Can't get msi for the hotplug controller
>shpchp: Use INTx for the hotplug controller
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.56.
>ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
>GSI 22 sharing vector 0xD0 and IRQ 22
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LMAC] -> GSI 17 (level, high) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:08.0 to 64
>forcedeth: using HIGHDMA
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>8250_pnp: Unknown symbol serial8250_unregister_port
>8250_pnp: Unknown symbol serial8250_register_port
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>hda: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>eth0: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:08.0
>ACPI: PCI Interrupt Link [LMA2] enabled at IRQ 16
>GSI 23 sharing vector 0xD8 and IRQ 23
>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LMA2] -> GSI 16 (level, high) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:09.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 010f1:2915 bound to 0000:00:09.0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x3440
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x3400
>i2c_adapter i2c-2: nForce2 SMBus adapter at 0x4440
>i2c_adapter i2c-3: nForce2 SMBus adapter at 0x4400
>ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [LAZA] -> GSI 23 (level, high) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:06.1 to 64
>hda_codec: Unknown model for ALC262, trying auto-probe from BIOS...
>lp: driver loaded but no devices found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>ACPI: Power Button (FF) [PWRF]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 2064376k swap on /dev/VolGroup00/Swap.  Priority:-1 extents:1 across:2064376k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>ip_conntrack version 2.4 (8192 buckets, 65536 max) - 304 bytes per conntrack
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>audit(1180545798.379:4): audit_pid=2448 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth0: no IPv6 routers present
>Bridge firewalling registered
>device vif0.0 entered promiscuous mode
>xenbr0: port 1(vif0.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 1(vif0.0) entering forwarding state
>peth0: Promiscuous mode enabled.
>device peth0 entered promiscuous mode
>xenbr0: port 2(peth0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 2(peth0) entering forwarding state
>tap tap-1-51712: 2 getting info
>device vif1.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif1.0: link is not ready
>tap tap-2-51712: 2 getting info
>device vif2.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif2.0: link is not ready
>tap tap-3-51712: 2 getting info
>device vif3.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif3.0: link is not ready
>tap tap-4-51712: 2 getting info
>device vif4.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif4.0: link is not ready
>tap tap-5-51712: 2 getting info
>device vif5.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif5.0: link is not ready
>tap tap-6-51712: 2 getting info
>device vif6.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif6.0: link is not ready
>device vif7.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif7.0: link is not ready
>xenbr0: port 7(vif5.0) entering disabled state
>device vif5.0 left promiscuous mode
>xenbr0: port 7(vif5.0) entering disabled state
>tap tap-8-51712: 2 getting info
>device vif8.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif8.0: link is not ready
>xenbr0: port 9(vif7.0) entering disabled state
>device vif7.0 left promiscuous mode
>xenbr0: port 9(vif7.0) entering disabled state
>tap tap-9-51712: 2 getting info
>device vif9.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif9.0: link is not ready
>xenbr0: port 7(vif8.0) entering disabled state
>device vif8.0 left promiscuous mode
>xenbr0: port 7(vif8.0) entering disabled state
>tap tap-10-51712: 2 getting info
>device vif10.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif10.0: link is not ready
>xenbr0: port 9(vif9.0) entering disabled state
>device vif9.0 left promiscuous mode
>xenbr0: port 9(vif9.0) entering disabled state
>xenbr0: port 7(vif10.0) entering disabled state
>device vif10.0 left promiscuous mode
>xenbr0: port 7(vif10.0) entering disabled state
>tap tap-11-51712: 2 getting info
>device vif11.0 entered promiscuous mode
>ADDRCONF(NETDEV_UP): vif11.0: link is not ready
>xenbr0: port 7(vif11.0) entering disabled state
>device vif11.0 left promiscuous mode
>xenbr0: port 7(vif11.0) entering disabled state
>ADDRCONF(NETDEV_CHANGE): vif1.0: link becomes ready
>xenbr0: port 3(vif1.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 3(vif1.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif3.0: link becomes ready
>xenbr0: port 5(vif3.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 5(vif3.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif2.0: link becomes ready
>xenbr0: port 4(vif2.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 4(vif2.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif4.0: link becomes ready
>xenbr0: port 6(vif4.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 6(vif4.0) entering forwarding state
>ADDRCONF(NETDEV_CHANGE): vif6.0: link becomes ready
>xenbr0: port 8(vif6.0) entering learning state
>xenbr0: topology change detected, propagating
>xenbr0: port 8(vif6.0) entering forwarding state

Actions: View

Attachments on bug 241793: 155716 | 155717 | 155718 | 155723 | 155724 | 155725 | 155811 | 155812 | 155813 | 155816 | 155883