Attachment 155853 Details for Bug 241968 – Output of 'dmesg'

Output of 'dmesg'

dmesg.txt (text/plain), 30.87 KB, created by Keith Outwater on 2007-05-31 23:52:22 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Keith Outwater

Created: 2007-05-31 23:52:22 UTC

Size: 30.87 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
>Command line: ro root=LABEL=/ pci=assign-busses rhgb
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007ffd0000 (usable)
> BIOS-e820: 000000007ffd0000 - 000000007ffe5600 (reserved)
> BIOS-e820: 000000007ffe5600 - 000000007fff8000 (ACPI NVS)
> BIOS-e820: 000000007fff8000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fed20000 - 00000000fed9b000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524240) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F7C00, 0024 (r2 HP    )
>ACPI: XSDT 7FFE57BC, 0064 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: FACP 7FFE5684, 00F4 (r4 HP     309F            3 HP          1)
>ACPI: DSDT 7FFE5A70, FDB6 (r1 HP       nc9700    10000 MSFT  100000E)
>ACPI: FACS 7FFF7E80, 0040
>ACPI: SLIC 7FFE5820, 0176 (r1 HPQOEM SLIC-MPC        1 HP          1)
>ACPI: APIC 7FFE5998, 0068 (r1 HP     309F            1 HP          1)
>ACPI: MCFG 7FFE5A00, 003C (r1 HP     309F            1 HP          1)
>ACPI: TCPA 7FFE5A3C, 0032 (r2 HP     309F            1 HP          1)
>ACPI: SSDT 7FFF5826, 0059 (r1 HP       HPQNLP        1 MSFT  100000E)
>ACPI: SSDT 7FFF587F, 035C (r1 HP       HPQSAT        1 MSFT  100000E)
>ACPI: SSDT 7FFF60AE, 04E7 (r1 HP        CpuPm     3000 INTL 20060317)
>No NUMA configuration found
>Faking a node at 0000000000000000-000000007ffd0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 524240) 1 entries of 3200 used
>Bootmem setup node 0 0000000000000000-000000007ffd0000
>No mptable found.
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   524240
>On node 0 totalpages: 524143
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1277 pages reserved
>  DMA zone: 2666 pages, LIFO batch:0
>  DMA32 zone: 7111 pages used for memmap
>  DMA32 zone: 513033 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000e0000
>Nosave address range: 00000000000e0000 - 0000000000100000
>Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515699
>Kernel command line: ro root=LABEL=/ pci=assign-busses rhgb
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 2161.397 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>Memory: 2056372k/2096960k available (2319k kernel code, 40200k reserved, 1375k data, 316k init)
>Calibrating delay using timer specific routine.. 4325.64 BogoMIPS (lpj=2162820)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring handled by SMI
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 10391326
>Detected 10.391 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4321.89 BogoMIPS (lpj=2160947)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 4096K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU         T7400  @ 2.16GHz stepping 06
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=36
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [C003] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1100-113f claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.C003._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C07F._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C094._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C0FB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C10B._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.C003.C111._PRT]
>ACPI: PCI Interrupt Link [C107] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C108] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C109] (IRQs 10 *11)
>ACPI: PCI Interrupt Link [C10A] (IRQs 10 11) *5
>ACPI: PCI Interrupt Link [C11D] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C11E] (IRQs *10 11)
>ACPI: PCI Interrupt Link [C11F] (IRQs 10 *11)
>ACPI Exception (pci_link-0179): AE_NOT_FOUND, Evaluating _PRS [20070126]
>ACPI: Power Resource [C1E5] (on)
>ACPI: Power Resource [C1F4] (on)
>ACPI: Power Resource [C20D] (on)
>ACPI: Power Resource [C215] (on)
>ACPI: Power Resource [C318] (off)
>ACPI: Power Resource [C319] (off)
>ACPI: Power Resource [C31A] (off)
>ACPI: Power Resource [C31B] (off)
>ACPI: Power Resource [C31C] (off)
>ACPI: Power Resource [C31D] (off)
>ACPI: Power Resource [C31E] (off)
>ACPI: Power Resource [C31F] (off)
>ACPI: Power Resource [C320] (off)
>ACPI: Power Resource [C321] (off)
>ACPI: Power Resource [C322] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x7fffffff could not be reserved
>pnp: 00:0a: iomem range 0xffb00000-0xffbfffff could not be reserved
>pnp: 00:0a: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0c: ioport range 0x1000-0x107f has been reserved
>pnp: 00:0c: ioport range 0x1100-0x113f has been reserved
>pnp: 00:0c: ioport range 0x1200-0x121f has been reserved
>pnp: 00:0c: iomem range 0xf8000000-0xfbffffff has been reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec000ff could not be reserved
>pnp: 00:0c: iomem range 0xfed20000-0xfed3ffff could not be reserved
>pnp: 00:0c: iomem range 0xfed45000-0xfed8ffff could not be reserved
>pnp: 00:0d: iomem range 0xcdc00-0xcffff has been reserved
>pnp: 00:0d: iomem range 0xfeda0000-0xfedbffff could not be reserved
>pnp: 00:0d: iomem range 0xfee00000-0xfee00fff could not be reserved
>PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: 4000-4fff
>  MEM window: f5000000-f6ffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: f4100000-f41fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: f4000000-f40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.3
>  IO window: 2000-3fff
>  MEM window: f0000000-f3ffffff
>  PREFETCH window: disabled.
>PCI: Bus 6, cardbus bridge: 0000:05:06.0
>  IO window: 00006000-000060ff
>  IO window: 00006400-000064ff
>  PREFETCH window: 88000000-8bffffff
>  MEM window: 8c000000-8fffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 6000-6fff
>  MEM window: f4200000-f45fffff
>  PREFETCH window: 88000000-8bffffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:05:06.0[A] -> GSI 18 (level, low) -> IRQ 18
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3070k freed
>audit: initializing netlink socket (disabled)
>audit(1180604005.769:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F2580AE679027173
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [C323] to D3
>ACPI: Transitioning device [C323] to D3
>ACPI: Fan [C323] (off)
>ACPI: Transitioning device [C324] to D3
>ACPI: Transitioning device [C324] to D3
>ACPI: Fan [C324] (off)
>ACPI: Transitioning device [C325] to D3
>ACPI: Transitioning device [C325] to D3
>ACPI: Fan [C325] (off)
>ACPI: Transitioning device [C326] to D3
>ACPI: Transitioning device [C326] to D3
>ACPI: Fan [C326] (off)
>ACPI: Transitioning device [C327] to D3
>ACPI: Transitioning device [C327] to D3
>ACPI: Fan [C327] (off)
>ACPI: Transitioning device [C328] to D3
>ACPI: Transitioning device [C328] to D3
>ACPI: Fan [C328] (off)
>ACPI: Transitioning device [C329] to D3
>ACPI: Transitioning device [C329] to D3
>ACPI: Fan [C329] (off)
>ACPI: Transitioning device [C32A] to D3
>ACPI: Transitioning device [C32A] to D3
>ACPI: Fan [C32A] (off)
>ACPI: Transitioning device [C32B] to D3
>ACPI: Transitioning device [C32B] to D3
>ACPI: Fan [C32B] (off)
>ACPI: Transitioning device [C32C] to D3
>ACPI: Transitioning device [C32C] to D3
>ACPI: Fan [C32C] (off)
>ACPI: Transitioning device [C32D] to D3
>ACPI: Transitioning device [C32D] to D3
>ACPI: Fan [C32D] (off)
>ACPI: SSDT 7FFF5C64, 01EA (r1 HP      Cpu0Ist     3000 INTL 20060317)
>ACPI: SSDT 7FFF5ED3, 01DB (r1 HP      Cpu0Cst     3001 INTL 20060317)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7FFF5BDB, 0089 (r1 HP      Cpu1Ist     3000 INTL 20060317)
>ACPI: SSDT 7FFF5E4E, 0085 (r1 HP      Cpu1Cst     3000 INTL 20060317)
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Time: acpi_pm clocksource has been installed.
>ACPI: Thermal Zone [TZ0] (33 C)
>ACPI: Thermal Zone [TZ1] (47 C)
>ACPI: Thermal Zone [TZ2] (34 C)
>ACPI: Thermal Zone [TZ3] (30 C)
>ACPI: Thermal Zone [TZ4] (26 C)
>ACPI: Thermal Zone [TZ5] (75 C)
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:05:06.0 [103c:309f]
>Yenta: Enabling burst memory read transactions
>Yenta: Using INTVAL to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:05:06.0, mfunc 0x01aa1b22, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
>Socket status: 30000006
>pcmcia: parent PCI bridge I/O window: 0x6000 - 0x6fff
>pcmcia: parent PCI bridge Memory window: 0xf4200000 - 0xf45fffff
>pcmcia: parent PCI bridge Memory window: 0x88000000 - 0x8bffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:C20A,PNP0f13:C20B] at 0x60,0x64 irq 1,12
>i8042.c: Detected active multiplexing controller, rev 1.1.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX0 port at 0x60,0x64 irq 12
>serio: i8042 AUX1 port at 0x60,0x64 irq 12
>serio: i8042 AUX2 port at 0x60,0x64 irq 12
>serio: i8042 AUX3 port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>synaptics reset failed
>synaptics reset failed
>synaptics reset failed
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x00005000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 0xa44793/0x300000
>serio: Synaptics pass-through port at isa0060/serio4/input0
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 22, io base 0x00005020
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using uhci_hcd and address 2
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 19, io base 0x00005060
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xf7004000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>usb 1-1: device descriptor read/all, error -71
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ahci 0000:00:1f.2: version 2.1
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 21 (level, low) -> IRQ 21
>usb 5-7: new high speed USB device using ehci_hcd and address 4
>usb 5-7: configuration #1 chosen from 1 choice
>hub 5-7:1.0: USB hub found
>hub 5-7:1.0: 4 ports detected
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x1 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part 
>ata1: SATA max UDMA/133 cmd 0xffffc2000004a100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata2: SATA max UDMA/133 cmd 0xffffc2000004a180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata3: SATA max UDMA/133 cmd 0xffffc2000004a200 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>ata4: SATA max UDMA/133 cmd 0xffffc2000004a280 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 21
>scsi0 : ahci
>usb 1-1: new full speed USB device using uhci_hcd and address 4
>usb 1-1: configuration #1 chosen from 1 choice
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ATA-7: ST910021AS, 3.12, max UDMA/100
>ata1.00: 195371568 sectors, multi 16: LBA48 
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>usb 1-2: new full speed USB device using uhci_hcd and address 5
>usb 1-2: configuration #1 chosen from 1 choice
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>usb 5-7.1: new high speed USB device using ehci_hcd and address 5
>usb 5-7.1: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>ata3: SATA link down (SStatus 0 SControl 0)
>scsi3 : ahci
>usb 5-7.2: new low speed USB device using ehci_hcd and address 6
>usb 5-7.2: configuration #1 chosen from 1 choice
>input: Logitech N48 as /class/input/input3
>input: USB HID v1.00 Mouse [Logitech N48] on usb-0000:00:1d.7-7.2
>usb 5-7.3: new low speed USB device using ehci_hcd and address 7
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      ST910021AS       3.12 PQ: 0 ANSI: 5
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda:<6>usb 5-7.3: configuration #1 chosen from 1 choice
> sda1 sda2 sda3
>input: Chicony  USB Keyboard as /class/input/input4
>input: USB HID v1.00 Keyboard [Chicony  USB Keyboard] on usb-0000:00:1d.7-7.3
>input: Chicony  USB Keyboard as /class/input/input5
>input,hiddev96: USB HID v1.00 Device [Chicony  USB Keyboard] on usb-0000:00:1d.7-7.3
>sd 0:0:0:0: Attached scsi disk sda
>usb 5-7.4: new high speed USB device using ehci_hcd and address 8
>usb 5-7.4: configuration #1 chosen from 1 choice
>hub 5-7.4:1.0: USB hub found
>hub 5-7.4:1.0: 4 ports detected
>input: PS/2 Generic Mouse as /class/input/input6
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000015080 irq 14
>ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000015088 irq 15
>scsi4 : ata_piix
>ata5.00: ATAPI, max MWDMA2
>ata5.00: configured for MWDMA2
>scsi5 : ata_piix
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            TSSTcorp CD/DVDW TS-L632D HH15 PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1180604016.495:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
>security:  60 classes, 65638 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda2, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1180604016.791:3): policy loaded auid=4294967295
>Floppy drive(s): fd0 is 1.44M
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input7
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:05:06.1[B] -> GSI 19 (level, low) -> IRQ 19
>fw_ohci: Added fw-ohci device 0000:05:06.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:05:06.2[A] -> GSI 18 (level, low) -> IRQ 18
>tg3.c:v3.75.1 (May 7, 2007)
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>Bluetooth: Core ver 2.11
>eth0: Tigon3 [partno(BCM95751M) rev 4201 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:16:d4:a1:c7:44
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1]
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: HCI USB driver ver 2.9
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.21kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>usbcore: registered new interface driver hci_usb
>sdhci: SDHCI controller found at 0000:05:06.3 [104c:803c] (rev 0)
>ACPI: PCI Interrupt 0000:05:06.3[C] -> GSI 22 (level, low) -> IRQ 22
>mmc0: SDHCI at 0xf4209000 irq 22 PIO
>iwl3945: Channel 12 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 13 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 34 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 38 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 42 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 46 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 100 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 104 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 108 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 112 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 116 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 120 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 124 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 128 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 132 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 136 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 140 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
>fw_core: created new fw device fw0 (0 config rom retries)
>wmaster0: Selected rate control algorithm 'simple'
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>floppy0: no floppy controllers found
>loop: loaded (max 8 devices)
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
>
>Call Trace:
> [<ffffffff80229e7b>] local_bh_enable+0x42/0x98
> [<ffffffff8025c008>] cond_resched_softirq+0x35/0x4b
> [<ffffffff8022e9f5>] release_sock+0x59/0xaa
> [<ffffffff802252a6>] tcp_sendmsg+0x9ae/0xab8
> [<ffffffff8024297c>] sock_aio_write+0x110/0x128
> [<ffffffff8024286c>] sock_aio_write+0x0/0x128
> [<ffffffff802cd13d>] do_sync_readv_writev+0xc0/0x107
> [<ffffffff8030ee3d>] file_has_perm+0x94/0xa3
> [<ffffffff80293107>] autoremove_wake_function+0x0/0x2e
> [<ffffffff802cd5ae>] do_readv_writev+0xd7/0x1ae
> [<ffffffff8030edf1>] file_has_perm+0x48/0xa3
> [<ffffffff802cd70c>] sys_writev+0x45/0x93
> [<ffffffff8025711e>] system_call+0x7e/0x83
>
>ACPI: AC Adapter [C1B0] (on-line)
>ACPI: Battery Slot [C1B2] (battery present)
>ACPI: Battery Slot [C1B1] (battery absent)
>No dock devices found.
>input: Power Button (FF) as /class/input/input8
>ACPI: Power Button (FF) [PWRF]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [C237]
>input: Lid Switch as /class/input/input10
>ACPI: Lid Switch [C22F]
>ibm_acpi: ec object not found
>ACPI: Video Device [C128] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda2, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 1052248k swap on /dev/sda3.  Priority:-1 extents:1 across:1052248k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is on for TX and on for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1180604050.255:4): audit_pid=2349 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>SELinux: initialized (dev nfsd, type nfsd), uses genfs_contexts
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>ata5.00: qc timeout (cmd 0xa0)
>ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
>ata5.00: cmd a0/00:00:00:00:20/00:00:00:00:00/a0 tag 0 cdb 0x0 data 0 
>         res 51/20:03:00:00:00/00:00:00:00:00/a0 Emask 0x5 (timeout)
>ata5: port is slow to respond, please be patient (Status 0xd0)
>ata5: port failed to respond (30 secs, Status 0xd0)
>ata5: soft resetting port
>ata5.00: configured for MWDMA2
>ata5: EH complete

Actions: View

Attachments on bug 241968: 155853