Attachment 155907 Details for Bug 239264 – Output from dmesg on Toshiba 1415-S173 (kernel 2.6.21-1.3194.fc7)

Output from dmesg on Toshiba 1415-S173 (kernel 2.6.21-1.3194.fc7)

dmesg.txt (text/plain), 19.91 KB, created by Calvin Dodge on 2007-06-01 16:57:24 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Calvin Dodge

Created: 2007-06-01 16:57:24 UTC

Size: 19.91 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e0000 size: 000000000000ee00 end: 00000000000eee00 type: 2
>copy_e820_map() start: 00000000000eee00 size: 0000000000000200 end: 00000000000ef000 type: 4
>copy_e820_map() start: 00000000000ef000 size: 0000000000011000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001fed0000 end: 000000001ffd0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001ffd0000 size: 0000000000010000 end: 000000001ffe0000 type: 3
>copy_e820_map() start: 000000001ffe0000 size: 0000000000020000 end: 0000000020000000 type: 2
>copy_e820_map() start: 00000000feda0000 size: 0000000000020000 end: 00000000fedc0000 type: 2
>copy_e820_map() start: 00000000ffb80000 size: 0000000000080000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fff80000 size: 0000000000080000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
> BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
> BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001ffd0000 (usable)
> BIOS-e820: 000000001ffd0000 - 000000001ffe0000 (ACPI data)
> BIOS-e820: 000000001ffe0000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
> BIOS-e820: 00000000ffb80000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>511MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 131024) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   131024
>  HighMem    131024 ->   131024
>early_node_map[1] active PFN ranges
>    0:        0 ->   131024
>On node 0 totalpages: 131024
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 991 pages used for memmap
>  Normal zone: 125937 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F0180, 0014 (r0 TOSHIB)
>ACPI: RSDT 1FFD0000, 0030 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: FACP 1FFD0058, 0084 (r2 TOSHIB 750        970814 TASM  4010000)
>ACPI: DSDT 1FFD0110, 5487 (r1 TOSHIB 2410     20020918 MSFT  100000A)
>ACPI: FACS 000EEE00, 0040
>ACPI: DBGP 1FFD00DC, 0034 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: BOOT 1FFD0030, 0028 (r1 TOSHIB 750        970814 TASM  4010000)
>ACPI: PM-Timer IO Port: 0xee08
>Allocating PCI resources starting at 30000000 (gap: 20000000:deda0000)
>Built 1 zonelists.  Total pages: 130001
>Kernel command line: ro root=LABEL=/ rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0140b000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1794.288 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 511896k/524096k available (2066k kernel code, 11620k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdffd0000   ( 511 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3590.70 BogoMIPS (lpj=1795351)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebf9ff 00000000 00000000 00000000 00000400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 256K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf1ff 00000000 00000000 00003080 00000400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 0e00)
>CPU0: Intel Mobile Intel(R) Celeron(R) CPU 1.80GHz stepping 07
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time:  5:13:02  Date: 05/01/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd4df, last bus=5
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region ee00-ee7f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region eec0-eeff claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Firmware left 0000:02:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #05 (-#08) is hidden behind transparent bridge #02 (-#05) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *11)
>ACPI: Power Resource [PFAN] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 11 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0xe0000-0xeffff could not be reserved
>pnp: 00:00: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0x1ffcffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: fd000000-fdffffff
>  PREFETCH window: dbf00000-dfffffff
>PCI: Bus 3, cardbus bridge: 0000:02:0b.0
>  IO window: 0000d000-0000d0ff
>  IO window: 0000d400-0000d4ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 3c000000-3fffffff
>PCI: Bus 5, cardbus bridge: 0000:02:0b.1
>  IO window: 0000d800-0000d8ff
>  IO window: 0000dc00-0000dcff
>  PREFETCH window: 34000000-37ffffff
>  MEM window: 40000000-43ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fce00000-fcefffff
>  PREFETCH window: 30000000-37ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>PCI: Enabling device 0000:02:0b.0 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Enabling device 0000:02:0b.1 (0000 -> 0003)
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:0b.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2810k freed
>Simple Boot Flag at 0x7c set to 0x1
>apm: BIOS version 1.2 Flags 0x02 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1180674782.109:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN] to D3
>ACPI: Transitioning device [FAN] to D3
>ACPI: Fan [FAN] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THRM] (54 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel i845 Chipset.
>agpgart: AGP aperture is 256M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>PCI: Enabling device 0000:00:1f.6 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>ACPI: PCI interrupt for device 0000:00:1f.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:02:0b.0 [1179:0001]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000011
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
>Time: acpi_pm clocksource has been installed.
>Yenta: CardBus bridge found at 0000:02:0b.1 [1179:0001]
>Yenta: ISA IRQ mask 0x04b8, PCI irq 11
>Socket status: 30000007
>Yenta: Raising subordinate bus# of parent bus (#02) from #05 to #08
>pcmcia: parent PCI bridge I/O window: 0xd000 - 0xdfff
>cs: IO port probe 0xd000-0xdfff: clean.
>pcmcia: parent PCI bridge Memory window: 0xfce00000 - 0xfcefffff
>pcmcia: parent PCI bridge Memory window: 0x30000000 - 0x37ffffff
>Clocksource tsc unstable (delta = -496188164 ns)
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:767:212
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>pccard: PCMCIA card inserted into slot 0
>cs: memory probe 0xfce00000-0xfcefffff: excluding 0xfce00000-0xfce0ffff 0xfcef0000-0xfcefffff
>pcmcia: registering new device pcmcia0.0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 11, io base 0x0000efe0
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 11, io base 0x0000ef80
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>input: PS/2 Mouse as /class/input/input2
>input: AlpsPS/2 ALPS GlidePoint as /class/input/input3
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001cfa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001cfa8 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>ata1.00: ATA-6: HTS541060G9AT00, MB3OA60A, max UDMA/100
>ata1.00: 117210240 sectors, multi 0: LBA48 
>ata1.00: ata_hpa_resize 1: sectors = 117210240, hpa_sectors = 117210240
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>ata2.00: ATAPI, max UDMA/33
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      HTS541060G9AT00  MB3O PQ: 0 ANSI: 5
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 117210240 512-byte hdwr sectors (60012 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            TEAC     DW-224E          7.0A PQ: 0 ANSI: 5
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1180674790.532:2): selinux=0 auid=4294967295
>cs: IO port probe 0x100-0x3af: excluding 0x1e0-0x1e7
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>cs: IO port probe 0x100-0x3af: excluding 0x1e0-0x1e7
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>iTCO_vendor_support: vendor-support=0
>FDC 0 is a post-1991 82077
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH3-M TCO device (Version=1, TCOBASE=0x6e60)
>iTCO_wdt: heartbeat value must be 2<heartbeat<39 (TCO v1) or 613 (TCO v2), using 30
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>input: PC Speaker as /class/input/input4
>pnp: Device 00:0a activated.
>parport: PnPBIOS parport detected.
>pnp: Device 00:0a disabled.
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
>ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
>e100: eth0: e100_probe: addr 0xfceff000, irq 11, MAC addr 00:00:39:2D:8C:E2
>PCI: Enabling device 0000:00:1f.5 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>orinoco 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>orinoco_cs 0.15 (David Gibson <hermes@gibson.dropbear.id.au>, Pavel Roskin <proski@gnu.org>, et al)
>eth1: Hardware identity 0001:0004:0005:0000
>eth1: Station identity  001f:0001:0008:0048
>eth1: Firmware determined as Lucent/Agere 8.72
>eth1: Ad-hoc demo mode supported
>eth1: IEEE standard IBSS ad-hoc mode supported
>eth1: WEP supported, 104-bit key
>eth1: MAC address 00:02:2D:AA:C4:01
>eth1: Station name "HERMES I"
>eth1: ready
>eth1: orinoco_cs at 0.0, irq 3, io 0xd100-0xd13f
>intel8x0_measure_ac97_clock: measured 50376 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:1f.6 to 64
>loop: loaded (max 8 devices)
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt Link [LNKG] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKG] -> GSI 10 (level, low) -> IRQ 10
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
> [<c042b0cf>] local_bh_enable+0x45/0x92
> [<c06002bd>] cond_resched_softirq+0x2c/0x42
> [<c059adf3>] release_sock+0x4f/0x9d
> [<c05c670d>] tcp_sendmsg+0x90b/0x9f9
> [<c04e7350>] copy_to_user+0x3c/0x50
> [<c059f285>] memcpy_toiovec+0x27/0x4a
> [<c059ddb8>] __kfree_skb+0xb5/0x113
> [<c06016f4>] _spin_lock_bh+0x8/0x18
> [<c05dec95>] inet_sendmsg+0x3b/0x45
> [<c0598731>] sock_aio_write+0xf6/0x102
> [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c04e7100>] copy_from_user+0x3a/0x66
> [<c04752a5>] rw_copy_check_uvector+0x5c/0xb0
> [<c0475b33>] do_readv_writev+0xbc/0x187
> [<c059863b>] sock_aio_write+0x0/0x102
> [<c059a7dc>] sock_common_setsockopt+0x1d/0x22
> [<c0475c3b>] vfs_writev+0x3d/0x48
> [<c04760a4>] sys_writev+0x41/0x95
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>ACPI: AC Adapter [ADP1] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>toshiba_acpi: Toshiba Laptop ACPI Extras version 0.18
>toshiba_acpi:     HCI method: \_SB_.VALD.GHCI
>ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3 FS on sda4, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda3, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>fuse init (API version 7.8)
>Adding 987988k swap on /dev/sda2.  Priority:-1 extents:1 across:987988k
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>eth1: New link status: Connected (0001)
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth0: no IPv6 routers present
>eth1: no IPv6 routers present
>eth1: New link status: Disconnected (0002)
>eth1: New link status: Connected (0001)
>ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
>eth1: no IPv6 routers present
>eth0: no IPv6 routers present
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0
>end_request: I/O error, dev fd0, sector 0

Actions: View

Attachments on bug 239264: 155907 | 156454