Attachment 155919 Details for Bug 242111 – dmesg output

dmesg output

dmesg.txt (text/plain), 27.39 KB, created by Frank Cox on 2007-06-01 18:52:54 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Frank Cox

Created: 2007-06-01 18:52:54 UTC

Size: 27.39 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000e6000 size: 000000000001a000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007de2fc00 end: 000000007df2fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007df2fc00 size: 0000000000000400 end: 000000007df30000 type: 4
>copy_e820_map() start: 000000007df30000 size: 0000000000010000 end: 000000007df40000 type: 3
>copy_e820_map() start: 000000007df40000 size: 00000000000b0000 end: 000000007dff0000 type: 4
>copy_e820_map() start: 000000007dff0000 size: 0000000000010000 end: 000000007e000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fed13000 size: 0000000000007000 end: 00000000fed1a000 type: 2
>copy_e820_map() start: 00000000fed1c000 size: 0000000000084000 end: 00000000feda0000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007df2fc00 (usable)
> BIOS-e820: 000000007df2fc00 - 000000007df30000 (ACPI NVS)
> BIOS-e820: 000000007df30000 - 000000007df40000 (ACPI data)
> BIOS-e820: 000000007df40000 - 000000007dff0000 (ACPI NVS)
> BIOS-e820: 000000007dff0000 - 000000007e000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fed13000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000feda0000 (reserved)
>1119MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000ff780
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 515887) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   515887
>early_node_map[1] active PFN ranges
>    0:        0 ->   515887
>On node 0 totalpages: 515887
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2238 pages used for memmap
>  HighMem zone: 284273 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000F4EB0, 0014 (r0 ACPIAM)
>ACPI: RSDT 7DF30000, 003C (r1 INTEL  D915GMH  20050128 MSFT       97)
>ACPI: FACP 7DF30200, 0081 (r2 INTEL  D915GMH  20050128 MSFT       97)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r2 C-state control [20070126]
>ACPI: DSDT 7DF30440, 5BDF (r1 INTEL  D915GMH         1 INTL  2002026)
>ACPI: FACS 7DF40000, 0040
>ACPI: APIC 7DF30390, 0068 (r1 INTEL  D915GMH  20050128 MSFT       97)
>ACPI: MCFG 7DF30400, 003C (r1 INTEL  D915GMH  20050128 MSFT       97)
>ACPI: ASF! 7DF36020, 0099 (r16 LEGEND I865PASF        1 INTL  2002026)
>ACPI: TCPA 7DF360C0, 0034 (r1 INTEL  TBLOEMID        1 MSFT       97)
>ACPI: WDDT 7DF360F4, 0040 (r1 INTEL  OEMWDDT         1 INTL  2002026)
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 80000000 (gap: 7e000000:62000000)
>Built 1 zonelists.  Total pages: 511857
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 3000.162 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2037568k/2063548k available (2066k kernel code, 24768k reserved, 1092k data, 240k init, 1146044k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6003.17 BogoMIPS (lpj=3001588)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c077d000 soft=c075d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5999.34 BogoMIPS (lpj=2999671)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000000
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01
>Total of 2 processors activated (12002.51 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=110
>Time: 18:08:57  Date: 04/31/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0500-053f claimed by ICH6 GPIO
>PCI: Firmware left 0000:06:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>ACPI: Power Resource [URP2] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 14 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
>pnp: 00:0c: ioport range 0x400-0x47f has been reserved
>pnp: 00:0c: ioport range 0x680-0x6ff has been reserved
>pnp: 00:0c: ioport range 0x500-0x53f has been reserved
>pnp: 00:0c: iomem range 0xeec00000-0xeec03fff could not be reserved
>pnp: 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
>pnp: 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
>pnp: 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0d: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:0d: iomem range 0xc0000-0xdffff could not be reserved
>pnp: 00:0d: iomem range 0xe0000-0xfffff could not be reserved
>pnp: 00:0d: iomem range 0x100000-0x7dffffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: ff400000-ff4fffff
>  PREFETCH window: d0000000-d00fffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: disabled.
>  MEM window: ff800000-ff8fffff
>  PREFETCH window: d0400000-d04fffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: disabled.
>  MEM window: ff700000-ff7fffff
>  PREFETCH window: d0300000-d03fffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: ff600000-ff6fffff
>  PREFETCH window: d0200000-d02fffff
>PCI: Bridge: 0000:00:1c.3
>  IO window: disabled.
>  MEM window: ff500000-ff5fffff
>  PREFETCH window: d0100000-d01fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: b000-bfff
>  MEM window: ff900000-ff9fffff
>  PREFETCH window: d0500000-d05fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3472k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1180634938.336:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.3 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.3:pcie00]
>Allocate Port Service[0000:00:1c.3:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 8 throttling states)
>ACPI: Processor [CPU2] (supports 8 throttling states)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 915G Chipset.
>agpgart: Detected 32508K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 7:298:141
>  hash matches device device:12
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000c800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000cc00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>usb 2-1: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffac4000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi0 : ata_piix
>usb 5-3: new high speed USB device using ehci_hcd and address 2
>usb 5-3: configuration #1 chosen from 1 choice
>ata1.00: ATAPI, max UDMA/33
>usb 2-2: new low speed USB device using uhci_hcd and address 3
>usb 2-2: configuration #1 chosen from 1 choice
>input: Logitech Logitech Cordless RumblePad 2 as /class/input/input3
>Force feedback for Logitech force feedback devices by Johann Deneux <johann.deneux@it.uu.se>
>input: USB HID v1.10 Gamepad [Logitech Logitech Cordless RumblePad 2] on usb-0000:00:1d.1-2
>ata1.00: qc timeout (cmd 0xef)
>ata1.00: failed to set xfermode (err_mask=0x4)
>ata1: failed to recover some devices, retrying in 5 secs
>ata1.00: qc timeout (cmd 0xef)
>ata1.00: failed to set xfermode (err_mask=0x4)
>ata1.00: limiting speed to UDMA/33:PIO3
>ata1: failed to recover some devices, retrying in 5 secs
>ata1.00: qc timeout (cmd 0xef)
>ata1.00: failed to set xfermode (err_mask=0x4)
>ata1.00: disabled
>scsi1 : ata_piix
>ATA: abnormal status 0x7F on port 0x00010177
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata3: SATA max UDMA/133 cmd 0x0001e800 ctl 0x0001e402 bmdma 0x0001d800 irq 19
>ata4: SATA max UDMA/133 cmd 0x0001e000 ctl 0x0001dc02 bmdma 0x0001d808 irq 19
>scsi2 : ata_piix
>ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
>ata3.00: ATA-7: ST3300622AS, 3.AAD, max UDMA/133
>ata3.00: 586072368 sectors, multi 16: LBA48 NCQ (depth 0/32)
>ata3.00: ata_hpa_resize 1: sectors = 586072368, hpa_sectors = 586072368
>ata3.00: configured for UDMA/133
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x0001e007
>scsi 2:0:0:0: Direct-Access     ATA      ST3300622AS      3.AA PQ: 0 ANSI: 5
>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 586072368 512-byte hdwr sectors (300069 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 2:0:0:0: Attached scsi disk sda
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1180635045.320:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>sd 2:0:0:0: Attached scsi generic sg0 type 0
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>intel_rng: FWH not detected
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>ACPI: PCI Interrupt 0000:06:05.0[A] -> GSI 17 (level, low) -> IRQ 17
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x03F0 pid 0x1C17
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>fw_ohci: Added fw-ohci device 0000:06:05.0, OHCI version 1.0
>ACPI: PCI Interrupt 0000:06:08.0[A] -> GSI 20 (level, low) -> IRQ 21
>e100: eth0: e100_probe: addr 0xff901000, irq 21, MAC addr 00:13:20:44:27:99
>loop: loaded (max 8 devices)
>fw_core: created new fw device fw0 (0 config rom retries)
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
>No dock devices found.
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: found ejectable bay
>ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE1.CHN1.DRV0] Added
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
> [<c042b0cf>] local_bh_enable+0x45/0x92
> [<c06002bd>] cond_resched_softirq+0x2c/0x42
> [<c059adf3>] release_sock+0x4f/0x9d
> [<c05cec7d>] tcp_send_ack+0xeb/0xef
> [<c05c7755>] tcp_recvmsg+0x8d2/0x9de
> [<c0480872>] core_sys_select+0x1ae/0x2f3
> [<c059a7a9>] sock_common_recvmsg+0x3e/0x54
> [<c0598839>] sock_aio_read+0xfc/0x108
> [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
> [<c04755f8>] do_sync_read+0xc7/0x10a
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c059863b>] sock_aio_write+0x0/0x102
> [<c04e7350>] copy_to_user+0x3c/0x50
> [<c0475e99>] vfs_read+0xba/0x152
> [<c04762db>] sys_read+0x41/0x67
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
>Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
>NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
>NFSD: starting 90-second grace period
>eth0: no IPv6 routers present
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK
>nfs: server fileserver not responding, still trying
>nfs: server fileserver OK

Actions: View

Attachments on bug 242111: 155919 | 155956 | 192271 | 192281 | 192291 | 290366