Attachment 156038 Details for Bug 242385 – dmesg > dmesg.txt

dmesg > dmesg.txt

dmesg.txt (text/plain), 24.37 KB, created by Kevin Crocker on 2007-06-03 21:44:34 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Kevin Crocker

Created: 2007-06-03 21:44:34 UTC

Size: 24.37 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000d2000 size: 0000000000002000 end: 00000000000d4000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000005fe70000 end: 000000005ff70000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000005ff70000 size: 000000000000b000 end: 000000005ff7b000 type: 3
>copy_e820_map() start: 000000005ff7b000 size: 0000000000005000 end: 000000005ff80000 type: 4
>copy_e820_map() start: 000000005ff80000 size: 0000000000080000 end: 0000000060000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff800000 size: 0000000000400000 end: 00000000ffc00000 type: 2
>copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000005ff70000 (usable)
> BIOS-e820: 000000005ff70000 - 000000005ff7b000 (ACPI data)
> BIOS-e820: 000000005ff7b000 - 000000005ff80000 (ACPI NVS)
> BIOS-e820: 000000005ff80000 - 0000000060000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>639MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6db0
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 393072) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   393072
>early_node_map[1] active PFN ranges
>    0:        0 ->   393072
>On node 0 totalpages: 393072
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 1278 pages used for memmap
>  HighMem zone: 162418 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F6DC0, 0014 (r0 GATEWA)
>ACPI: RSDT 5FF74258, 0034 (r1 GATEWA M675     20040220  LTP        0)
>ACPI: FACP 5FF7AECF, 0074 (r1 GATEWA M675     20040220 PTL         3)
>ACPI: DSDT 5FF7428C, 6C43 (r1 GATEWA M675     20040220 MSFT  100000E)
>ACPI: FACS 5FF7BFC0, 0040
>ACPI: APIC 5FF7AF43, 005E (r1 GATEWA M675     20040220  LTP        0)
>ACPI: BOOT 5FF7AFA1, 0028 (r1 GATEWA M675     20040220  LTP        1)
>ACPI: SSDT 5FF7AFC9, 0037 (r1 GATEWA M675     20040220  LTP        1)
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:2 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 70000000 (gap: 60000000:9ec00000)
>Built 1 zonelists.  Total pages: 390002
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 2793.985 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1550124k/1572288k available (2066k kernel code, 20912k reserved, 1092k data, 240k init, 654784k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5589.46 BogoMIPS (lpj=2794731)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c077d000 soft=c075d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5585.20 BogoMIPS (lpj=2792601)
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Physical Processor ID: 0
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) 4 CPU 2.80GHz stepping 09
>Total of 2 processors activated (11174.66 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=2
>Time: 20:50:28  Date: 05/03/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd952, last bus=3
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: Device [SLAV] status [00000008]: functional but not present; setting present
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH4 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>PCI: Bus #04 (-#07) is hidden behind transparent bridge #03 (-#03) (try 'pci=assign-busses')
>Please report the result to linux-kernel to fix this permanently
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.ICSA._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKC] (IRQs *10)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 10) *0
>ACPI: PCI Interrupt Link [LNKF] (IRQs 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 10) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs *10)
>ACPI: Power Resource [PFN0] (off)
>ACPI: Power Resource [PFN3] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: iomem range 0xff800000-0xffbfffff could not be reserved
>pnp: 00:01: iomem range 0xfff00000-0xffffffff could not be reserved
>pnp: 00:01: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:01: iomem range 0xe0000-0xfffff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: 2000-2fff
>  MEM window: e0100000-e01fffff
>  PREFETCH window: f0000000-f7ffffff
>PCI: Bridge: 0000:00:03.0
>  IO window: 3000-3fff
>  MEM window: e0200000-e02fffff
>  PREFETCH window: disabled.
>PCI: Bus 4, cardbus bridge: 0000:03:01.0
>  IO window: 00004000-000040ff
>  IO window: 00004400-000044ff
>  PREFETCH window: 70000000-73ffffff
>  MEM window: 78000000-7bffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 4000-4fff
>  MEM window: e0300000-e03fffff
>  PREFETCH window: 70000000-73ffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3473k freed
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1180903827.212:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Transitioning device [FAN0] to D3
>ACPI: Fan [FAN0] (off)
>ACPI: Transitioning device [FAN3] to D3
>ACPI: Transitioning device [FAN3] to D3
>ACPI: Fan [FAN3] (off)
>ACPI: CPU0 (power states: C1[C1] C2[C2])
>ACPI: CPU1 (power states: C1[C1] C2[C2])
>ACPI: Thermal Zone [THRM] (58 C)
>ACPI: Thermal Zone [THR2] (54 C)
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>Switched to high resolution mode on CPU 1
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 865 Chipset.
>agpgart: AGP aperture is 128M @ 0xe8000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Yenta: CardBus bridge found at 0000:03:01.0 [107b:0601]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:03:01.0, mfunc 0x011c1112, devctl 0x64
>Yenta: ISA IRQ mask 0x0cf8, PCI irq 16
>Socket status: 30000086
>Yenta: Raising subordinate bus# of parent bus (#03) from #03 to #07
>pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
>cs: IO port probe 0x4000-0x4fff: clean.
>pcmcia: parent PCI bridge Memory window: 0xe0300000 - 0xe03fffff
>pcmcia: parent PCI bridge Memory window: 0x70000000 - 0x73ffffff
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOU2] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:134:851
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 17, io base 0x00001800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001820
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 19, io base 0x00001840
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001860
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0xf6eb3, caps: 0xa44713/0xc0000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 20, io mem 0xe0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011880 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011888 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
>ata1.00: ATA-5: IC25N040ATCS04-0, CA4OA71A, max UDMA/100
>ata1.00: 78140160 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 78140160, hpa_sectors = 78140160
>ata1.00: configured for UDMA/100
>scsi1 : ata_piix
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>ata2.00: ATAPI, max UDMA/33
>usb 2-1: configuration #1 chosen from 1 choice
>input: Logitech USB-PS/2 Trackball as /class/input/input3
>input: USB HID v1.00 Mouse [Logitech USB-PS/2 Trackball] on usb-0000:00:1d.1-1
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      IC25N040ATCS04-0 CA4O PQ: 0 ANSI: 5
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            Slimtype COMBO LSC-24082K JGK1 PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1180903837.211:2): selinux=0 auid=4294967295
>input: PC Speaker as /class/input/input4
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>cs: IO port probe 0x100-0x3af: excluding 0x378-0x37f
>cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>sr0: scsi3-mmc drive: 31x/47x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>Floppy drive(s): fd0 is 1.44M
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 16
>Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:02:01.0[A] -> GSI 18 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:02:01.0 to 64
>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:e0:b8:5c:01:b2
>intel_rng: FWH not detected
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:03:01.1[A] -> GSI 17 (level, low) -> IRQ 16
>fw_ohci: Added fw-ohci device 0000:03:01.1, OHCI version 1.10
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>fw_core: created new fw device fw0 (0 config rom retries)
>intel8x0_measure_ac97_clock: measured 50310 usecs
>intel8x0: clocking to 48000
>ACPI: PCI Interrupt 0000:03:02.0[A] -> GSI 19 (level, low) -> IRQ 18
>ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x02, vendor 0x4243)
>ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
>ssb: Core 2 found: PCMCIA (cc 0x80D, rev 0x01, vendor 0x4243)
>ssb: Core 3 found: V90 (cc 0x807, rev 0x01, vendor 0x4243)
>ssb: Core 4 found: PCI (cc 0x804, rev 0x07, vendor 0x4243)
>ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x04, vendor 0x4243)
>ssb: Ignoring additional 802.11 core
>ssb: Switching to PCI core, index 4
>ssb: Sonics Silicon Backplane found on PCI device 0000:03:02.0
>bcm43xx_mac80211: Broadcom 4306 WLAN found
>ssb: Switching to IEEE 802.11 core, index 1
>bcm43xx_mac80211: Found PHY: Analog 1, Type 2, Revision 1
>bcm43xx_mac80211: Found Radio: Manuf 0x17F, Version 0x2050, Revision 2
>bcm43xx_mac80211: Radio turned off
>wmaster0: Selected rate control algorithm 'simple'
>floppy0: no floppy controllers found
>loop: loaded (max 8 devices)
>Floppy drive(s): fd0 is 1.44M
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
> [<c042b0cf>] local_bh_enable+0x45/0x92
> [<c06002bd>] cond_resched_softirq+0x2c/0x42
> [<c059adf3>] release_sock+0x4f/0x9d
> [<c05cec7d>] tcp_send_ack+0xeb/0xef
> [<c05c7755>] tcp_recvmsg+0x8d2/0x9de
> [<c0480872>] core_sys_select+0x1ae/0x2f3
> [<c059a7a9>] sock_common_recvmsg+0x3e/0x54
> [<c0598839>] sock_aio_read+0xfc/0x108
> [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
> [<c04755f8>] do_sync_read+0xc7/0x10a
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c059863b>] sock_aio_write+0x0/0x102
> [<c04e7350>] copy_to_user+0x3c/0x50
> [<c0475e99>] vfs_read+0xba/0x152
> [<c04762db>] sys_read+0x41/0x67
> [<c0404f70>] syscall_call+0x7/0xb
> [<c0600000>] __sched_text_start+0x6e8/0x89e
> =======================
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Error installing notify handler
>Device 'dock.0' does not have a release() function, it is broken and must be fixed.
>BUG: warning at drivers/base/core.c:109/device_release() (Not tainted)
> [<c04e33be>] kobject_cleanup+0x3e/0x55
> [<c04e33d5>] kobject_release+0x0/0x8
> [<c04e3f21>] kref_put+0x72/0x7f
> [<c0550a04>] device_del+0x199/0x1ad
> [<f8b266d4>] find_dock+0x1da/0x204 [dock]
> [<c0517fc1>] acpi_ns_walk_namespace+0x101/0x11c
> [<c05167bc>] acpi_walk_namespace+0x57/0x74
> [<f8b264fa>] find_dock+0x0/0x204 [dock]
> [<f887d03c>] dock_init+0x3c/0x55 [dock]
> [<f8b264fa>] find_dock+0x0/0x204 [dock]
> [<c04432e4>] sys_init_module+0x16c3/0x17fa
> [<c04755f8>] do_sync_read+0xc7/0x10a
> [<c0468484>] do_mmap_pgoff+0x593/0x6f3
> [<c05507e5>] device_remove_file+0x0/0x25
> [<c0475e85>] vfs_read+0xa6/0x152
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>No dock devices found.
>ACPI: \_SB_.PCI0.IDE0.PRIM.SLAV: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.PRIM.SLAV: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.PRIM.SLAV] Added
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: found ejectable bay
>ACPI: \_SB_.PCI0.IDE0.SECN.BAY1: Adding notify handler
>ACPI: Bay [\_SB_.PCI0.IDE0.SECN.BAY1] Added
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input6
>ACPI: Lid Switch [LID]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX
>audit(1180903869.305:3): audit_pid=1996 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>eth0: no IPv6 routers present
>agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
>agpgart: Putting AGP V3 device at 0000:00:00.0 into 4x mode
>agpgart: Putting AGP V3 device at 0000:01:00.0 into 4x mode
>[drm] Setting GART location based on new memory map
>[drm] Loading R300 Microcode
>[drm] writeback test succeeded in 1 usecs

Actions: View

Attachments on bug 242385: 156038 | 156039