Attachment 156173 Details for Bug 242410 – /var/log/dmesg

/var/log/dmesg

dmesg (text/plain), 15.45 KB, created by Rene Rattur on 2007-06-05 06:07:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Rene Rattur

Created: 2007-06-05 06:07:35 UTC

Size: 15.45 KB

patch

obsolete

>Linux version 2.6.21-1.3200.fc8 (kojibuilder@xenbuilder2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Sat Jun 2 05:42:16 EDT 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 0000000017ff0000 (usable)
> BIOS-e820: 0000000017ff0000 - 0000000017ff8000 (ACPI data)
> BIOS-e820: 0000000017ff8000 - 0000000018000000 (ACPI NVS)
> BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>383MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 98288) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->    98288
>  HighMem     98288 ->    98288
>early_node_map[1] active PFN ranges
>    0:        0 ->    98288
>On node 0 totalpages: 98288
>  DMA zone: 52 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4044 pages, LIFO batch:0
>  Normal zone: 1195 pages used for memmap
>  Normal zone: 92997 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FA770, 0014 (r0 AMI   )
>ACPI: RSDT 17FF0000, 0028 (r1 AMIINT VIA_K7         10 MSFT       97)
>ACPI: FACP 17FF0030, 0081 (r1 AMIINT VIA_K7         11 MSFT       97)
>ACPI: DSDT 17FF0120, 3054 (r1    VIA   VIA_K7     1000 MSFT  100000D)
>ACPI: FACS 17FF8000, 0040
>ACPI: PM-Timer IO Port: 0x808
>Allocating PCI resources starting at 20000000 (gap: 18000000:e6c00000)
>Built 1 zonelists.  Total pages: 97041
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (014f0000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07b2000 soft=c0792000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 1300.117 MHz processor.
>Console: colour VGA+ 80x25
>Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar
>... MAX_LOCKDEP_SUBCLASSES:    8
>... MAX_LOCK_DEPTH:          30
>... MAX_LOCKDEP_KEYS:        2048
>... CLASSHASH_SIZE:           1024
>... MAX_LOCKDEP_ENTRIES:     8192
>... MAX_LOCKDEP_CHAINS:      16384
>... CHAINHASH_SIZE:          8192
> memory used by lock dependency info: 992 kB
> per task-struct memory footprint: 1200 bytes
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 377040k/393152k available (2187k kernel code, 15456k reserved, 1167k data, 260k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xd8800000 - 0xff7fe000   ( 623 MB)
>    lowmem  : 0xc0000000 - 0xd7ff0000   ( 383 MB)
>      .init : 0xc074c000 - 0xc078d000   ( 260 kB)
>      .data : 0xc0622e67 - 0xc0746ba4   (1167 kB)
>      .text : 0xc0400000 - 0xc0622e67   (2187 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>SLUB: Genslabs=23, HWalign=32, Order=0-1, MinObjects=4, Processors=1, Nodes=1
>Calibrating delay using timer specific routine.. 2602.86 BogoMIPS (lpj=1301434)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 64K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Compat vDSO mapped to ffffe000.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20070126
>ACPI: setting ELCR to 0200 (from 1c20)
>CPU0: AMD Duron(tm)  stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=52 bytes
>sizeof(inode)=564 bytes
>sizeof(dentry)=156 bytes
>sizeof(ext3inode)=800 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=2720 bytes
>Time: 18:49:37  Date: 05/04/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by vt8235 PM
>PCI quirk: region 0400-040f claimed by vt8235 SMB
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11 *12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
>ACPI: Power Resource [URP1] (off)
>ACPI: Power Resource [URP2] (off)
>ACPI: Power Resource [FDDP] (off)
>ACPI: Power Resource [LPTP] (off)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>ACPI: bus type pnp registered
>pnp: PnP ACPI: found 9 devices
>ACPI: ACPI bus type pnp unregistered
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>ACPI: RTC can wake from S4
>Time: tsc clocksource has been installed.
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: dde00000-dfefffff
>  PREFETCH window: cdd00000-ddcfffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 7, 589824 bytes)
>TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 3484k freed
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1180982977.785:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 4B6A5C83C46F2629
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>Boot video device is 0000:01:00.0
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU1] (supports 16 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected VIA PM266/KM266 chipset
>agpgart: AGP aperture is 128M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 671 not supported
>Using IPI No-Shortcut mode
>  Magic number: 11:994:846
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 260k freed
>Write protecting the kernel text: 2188k
>Write protecting the kernel read-only data: 885k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>uhci_hcd 0000:00:10.0: UHCI Host Controller
>uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:10.0: irq 5, io base 0x0000e400
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 12
>PCI: setting IRQ 12 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 12 (level, low) -> IRQ 12
>uhci_hcd 0000:00:10.1: UHCI Host Controller
>uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:10.1: irq 12, io base 0x0000e800
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:10.2: UHCI Host Controller
>uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:10.2: irq 11, io base 0x0000ec00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 10 (level, low) -> IRQ 10
>ehci_hcd 0000:00:10.3: EHCI Host Controller
>ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:10.3: irq 10, io mem 0xdfffff00
>ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.21 loaded.
>pata_via 0000:00:11.1: version 0.3.1
>ACPI: Unable to derive IRQ for device 0000:00:11.1
>ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
>scsi0 : pata_via
>scsi1 : pata_via
>ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001fc00 irq 14
>ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001fc08 irq 15
>ata1.00: ATAPI, max UDMA/33
>ata1.00: configured for UDMA/33
>usb 4-3: new high speed USB device using ehci_hcd and address 3
>ata2.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>ata2.00: ATA-7: SAMSUNG SP0411N, TW100-11, max UDMA/100
>ata2.00: 78242976 sectors, multi 16: LBA48 
>ata2.01: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata2.01: ATA-7: ExcelStor Technology J880, PF2OA21B, max UDMA/133
>ata2.01: 160836480 sectors, multi 16: LBA48 
>ata2.00: ata_hpa_resize 1: sectors = 78242976, hpa_sectors = 78242976
>ata2.00: configured for UDMA/100
>ata2.01: ata_hpa_resize 1: sectors = 160836480, hpa_sectors = 160836480
>ata2.01: configured for UDMA/133
>scsi 0:0:0:0: CD-ROM            LITEON   CD-ROM LTN526    YH0X PQ: 0 ANSI: 5
>scsi 1:0:0:0: Direct-Access     ATA      SAMSUNG SP0411N  TW10 PQ: 0 ANSI: 5
>sd 1:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:0:0: [sda] 78242976 512-byte hardware sectors (40060 MB)
>sd 1:0:0:0: [sda] Write Protect is off
>sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
>sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 1:0:0:0: [sda] Attached SCSI disk
>scsi 1:0:1:0: Direct-Access     ATA      ExcelStor Techno PF2O PQ: 0 ANSI: 5
>sd 1:0:1:0: [sdb] 160836480 512-byte hardware sectors (82348 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sd 1:0:1:0: [sdb] 160836480 512-byte hardware sectors (82348 MB)
>sd 1:0:1:0: [sdb] Write Protect is off
>sd 1:0:1:0: [sdb] Mode Sense: 00 3a 00 00
>sd 1:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1
>sd 1:0:1:0: [sdb] Attached SCSI disk
>usb 4-3: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 4-4: new high speed USB device using ehci_hcd and address 4
>usb 4-4: configuration #1 chosen from 1 choice
>libusual: modprobe for usb-storage succeeded, but module is not present
>usb 1-2: new low speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB Mouse as /class/input/input2
>input: USB HID v1.10 Mouse [Logitech USB Mouse] on usb-0000:00:10.0-2
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1180982986.284:2): selinux=0 auid=4294967295
>scsi 0:0:0:0: Attached scsi generic sg0 type 5
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>sd 1:0:1:0: Attached scsi generic sg2 type 0
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>sr0: scsi3-mmc drive: 52x/52x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 0:0:0:0: Attached scsi CD-ROM sr0
>NET: Registered protocol family 23
>via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
>ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>eth0: VIA Rhine II at 0xdffffe00, 00:0a:e6:88:fc:3b, IRQ 5.
>eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
>rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
>rtc0: alarms up to one year, y3k
>parport_pc 00:08: reported by Plug and Play ACPI
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
>PCI: Setting latency timer of device 0000:00:11.5 to 64
>loop: module loaded
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>No dock devices found.
>input: Power Button (FF) as /class/input/input3
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input4
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input5
>ACPI: Sleep Button (CM) [SLPB]
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 786424k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:786424k

Actions: View

Attachments on bug 242410: 156173 | 156174 | 156175