Attachment 156188 Details for Bug 242639 – Dmesg output

Dmesg output

dmesg.out (text/plain), 25.08 KB, created by Matt Darcy on 2007-06-05 08:50:46 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Matt Darcy

Created: 2007-06-05 08:50:46 UTC

Size: 25.08 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
>Command line: ro root=/dev/md1 irqpoll agp=off rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable)
> BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS)
> BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data)
> BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>end_pfn_map = 1245184
>DMI 2.4 present.
>ACPI: RSDP 000F91F0, 0014 (r0 IntelR)
>ACPI: RSDT CFEE3040, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: FACP CFEE30C0, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: DSDT CFEE3180, 4BB6 (r1 INTELR AWRDACPI     1000 MSFT  100000E)
>ACPI: FACS CFEE0000, 0040
>ACPI: HPET CFEE7E80, 0038 (r1 IntelR AWRDACPI 42302E31 AWRD       98)
>ACPI: MCFG CFEE7F00, 003C (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: APIC CFEE7D80, 0084 (r1 IntelR AWRDACPI 42302E31 AWRD        0)
>ACPI: SSDT CFEE7F80, 019E (r1  PmRef  Cpu0Ist     3000 INTL 20060912)
>ACPI: SSDT CFEE8410, 02F1 (r1  PmRef    CpuPm     3000 INTL 20040311)
>No NUMA configuration found
>Faking a node at 0000000000000000-0000000130000000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 851680) 1 entries of 3200 used
>Entering add_active_range(0, 1048576, 1245184) 2 entries of 3200 used
>Bootmem setup node 0 0000000000000000-0000000130000000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1245184
>early_node_map[3] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   851680
>    0:  1048576 ->  1245184
>On node 0 totalpages: 1048191
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1281 pages reserved
>  DMA zone: 2662 pages, LIFO batch:0
>  DMA32 zone: 14280 pages used for memmap
>  DMA32 zone: 833304 pages, LIFO batch:31
>  Normal zone: 2688 pages used for memmap
>  Normal zone: 193920 pages, LIFO batch:31
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 4, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x10b9a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Nosave address range: 00000000cfee0000 - 00000000cfee3000
>Nosave address range: 00000000cfee3000 - 00000000cfef0000
>Nosave address range: 00000000cfef0000 - 00000000cff00000
>Nosave address range: 00000000cff00000 - 00000000e0000000
>Nosave address range: 00000000e0000000 - 00000000f0000000
>Nosave address range: 00000000f0000000 - 00000000fec00000
>Nosave address range: 00000000fec00000 - 0000000100000000
>Allocating PCI resources starting at d0000000 (gap: cff00000:10100000)
>SMP: Allowing 4 CPUs, 2 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 1029886
>Kernel command line: ro root=/dev/md1 irqpoll agp=off rhgb quiet
>Misrouted IRQ fixup and polling support enabled
>This may significantly impact system performance
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>time.c: Detected 2004.545 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
>Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Checking aperture...
>Calgary: detecting Calgary via BIOS EBDA area
>Calgary: Unable to locate Rio Grande table in EBDA - bailing!
>PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Placing software IO TLB between 0x4e67000 - 0x8e67000
>Memory: 4054516k/4980736k available (2319k kernel code, 138248k reserved, 1375k data, 316k init)
>Calibrating delay using timer specific routine.. 4070.19 BogoMIPS (lpj=2035098)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 0/0 -> Node 0
>using mwait in idle threads.
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU0: Thermal monitoring enabled (TM1)
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 12528403
>Detected 12.528 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4009.10 BogoMIPS (lpj=2004552)
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU1: Thermal monitoring enabled (TM2)
>Intel(R) Core(TM)2 CPU          4400  @ 2.00GHz stepping 02
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=26
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 7 9 10 11 14 15) *0, disabled.
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI-GART: No AMD northbridge found.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
>pnp: 00:0e: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:0f: iomem range 0xf0000-0xfffff could not be reserved
>pnp: 00:0f: iomem range 0xfed00000-0xfed000ff could not be reserved
>pnp: 00:0f: iomem range 0xcfee0000-0xcfefffff could not be reserved
>pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: d000-dfff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: b000-bfff
>  MEM window: fdb00000-fdbfffff
>  PREFETCH window: fdc00000-fdcfffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: c000-cfff
>  MEM window: fde00000-fdefffff
>  PREFETCH window: fdd00000-fddfffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>Time: tsc clocksource has been installed.
>NET: Registered protocol family 2
>IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3258k freed
>audit: initializing netlink socket (disabled)
>audit(1181035919.708:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F2580AE679027173
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: SSDT CFEE8380, 0087 (r1  PmRef  Cpu1Ist     3000 INTL 20060912)
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>ACPI: Thermal Zone [THRM] (24 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1a.0 to 64
>uhci_hcd 0000:00:1a.0: UHCI Host Controller
>uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:1a.1 to 64
>uhci_hcd 0000:00:1a.1: UHCI Host Controller
>uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000fe00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000fd00
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000fc00
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000fb00
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 2 ports detected
>BUG: soft lockup detected on CPU#0!
>
>Call Trace:
> <IRQ>  [<ffffffff802ad31e>] softlockup_tick+0xd5/0xe7
> [<ffffffff8028ac35>] update_process_times+0x42/0x68
> [<ffffffff8026e710>] smp_local_timer_interrupt+0x34/0x55
> [<ffffffff8026ee36>] smp_apic_timer_interrupt+0x43/0x5b
> [<ffffffff80257d56>] apic_timer_interrupt+0x66/0x70
> [<ffffffff8020f926>] handle_IRQ_event+0x1a/0x53
> [<ffffffff802aebd2>] handle_edge_irq+0xe4/0x128
> [<ffffffff80265498>] do_IRQ+0xf1/0x15f
> [<ffffffff80257631>] ret_from_intr+0x0/0xa
> <EOI> 
>irq 19: nobody cared (try booting with the "irqpoll" option)
>
>Call Trace:
> <IRQ>  [<ffffffff802adfe6>] __report_bad_irq+0x30/0x72
> [<ffffffff802ae1f5>] note_interrupt+0x1cd/0x20e
> [<ffffffff802aeac6>] handle_fasteoi_irq+0xa9/0xd1
> [<ffffffff80265498>] do_IRQ+0xf1/0x15f
> [<ffffffff80257631>] ret_from_intr+0x0/0xa
> [<ffffffff8020f926>] handle_IRQ_event+0x1a/0x53
> [<ffffffff802aebd2>] handle_edge_irq+0xe4/0x128
> [<ffffffff80265498>] do_IRQ+0xf1/0x15f
> [<ffffffff80257631>] ret_from_intr+0x0/0xa
> <EOI> 
>handlers:
>[<ffffffff803b3b8d>] (usb_hcd_irq+0x0/0x52)
>Disabling IRQ #19
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1a.7 to 64
>ehci_hcd 0000:00:1a.7: EHCI Host Controller
>ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
>PCI: cache line size of 32 is not supported by device 0000:00:1a.7
>ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdfff000
>ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb6: configuration #1 chosen from 1 choice
>hub 6-0:1.0: USB hub found
>hub 6-0:1.0: 4 ports detected
>input: PS/2 Generic Mouse as /class/input/input2
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfdffe000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb7: configuration #1 chosen from 1 choice
>hub 7-0:1.0: USB hub found
>hub 7-0:1.0: 6 ports detected
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: generic_sse
>   generic_sse:  6108.000 MB/sec
>raid5: using function: generic_sse (6108.000 MB/sec)
>raid6: int64x1   1707 MB/s
>raid6: int64x2   2296 MB/s
>raid6: int64x4   1933 MB/s
>raid6: int64x8   1566 MB/s
>raid6: sse2x1    3191 MB/s
>raid6: sse2x2    3464 MB/s
>raid6: sse2x4    6050 MB/s
>raid6: using algorithm sse2x4 (6050 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.2: version 2.10ac1
>ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ata1: SATA max UDMA/133 cmd 0x000000000001fa00 ctl 0x000000000001f902 bmdma 0x000000000001f600 irq 19
>ata2: SATA max UDMA/133 cmd 0x000000000001f800 ctl 0x000000000001f702 bmdma 0x000000000001f608 irq 19
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 156312576, hpa_sectors = 156312576
>ata1.00: ATA-7: Maxtor 6Y080M0, YAR511W0, max UDMA/133
>ata1.00: 156312576 sectors, multi 16: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 156312576, hpa_sectors = 156312576
>ata1.00: configured for UDMA/133
>scsi1 : ata_piix
>ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
>ata2.00: ATA-7: Maxtor 6Y080M0, YAR51HW0, max UDMA/133
>ata2.00: 160086528 sectors, multi 16: LBA 
>ata2.00: ata_hpa_resize 1: sectors = 160086528, hpa_sectors = 160086528
>ata2.00: configured for UDMA/133
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156312576 512-byte hdwr sectors (80032 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: Direct-Access     ATA      Maxtor 6Y080M0   YAR5 PQ: 0 ANSI: 5
>SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sdb: 160086528 512-byte hdwr sectors (81964 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: 00 3a 00 00
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 sdb7 >
>sd 1:0:0:0: Attached scsi disk sdb
>ata_piix 0000:00:1f.5: MAP [ P0 P2 P1 P3 ]
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 19 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>ata3: SATA max UDMA/133 cmd 0x000000000001f300 ctl 0x000000000001f202 bmdma 0x000000000001ef00 irq 19
>ata4: SATA max UDMA/133 cmd 0x000000000001f100 ctl 0x000000000001f002 bmdma 0x000000000001ef08 irq 19
>scsi2 : ata_piix
>ATA: abnormal status 0x7F on port 0x000000000001f307
>scsi3 : ata_piix
>ATA: abnormal status 0x7F on port 0x000000000001f107
>ahci 0000:02:00.0: version 2.1
>ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:02:00.0 to 64
>ahci 0000:02:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
>ahci 0000:02:00.0: flags: 64bit ncq pm led clo pmp pio slum part 
>ata5: SATA max UDMA/133 cmd 0xffffc2000002c100 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>ata6: SATA max UDMA/133 cmd 0xffffc2000002c180 ctl 0x0000000000000000 bmdma 0x0000000000000000 irq 16
>scsi4 : ahci
>ata5: SATA link down (SStatus 0 SControl 300)
>scsi5 : ahci
>ata6: SATA link down (SStatus 120 SControl 300)
>PCI: Enabling device 0000:02:00.1 (0000 -> 0001)
>ACPI: PCI Interrupt 0000:02:00.1[B] -> GSI 17 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:02:00.1 to 64
>ata7: PATA max UDMA/100 cmd 0x000000000001bf00 ctl 0x000000000001be02 bmdma 0x000000000001bb00 irq 17
>ata8: PATA max UDMA/100 cmd 0x000000000001bd00 ctl 0x000000000001bc02 bmdma 0x000000000001bb08 irq 17
>scsi6 : pata_jmicron
>ata7.00: ATAPI, max UDMA/100
>ata7.00: configured for UDMA/100
>scsi7 : pata_jmicron
>ATA: abnormal status 0x7F on port 0x000000000001bd07
>scsi 6:0:0:0: CD-ROM            PLEXTOR  DVD-ROM PX-130A  1.01 PQ: 0 ANSI: 5
>md: md1 stopped.
>md: bind<sdb2>
>md: bind<sda2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: md3 stopped.
>md: bind<sdb5>
>md: bind<sda5>
>raid1: raid set md3 active with 2 out of 2 mirrors
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1181035959.513:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>sd 1:0:0:0: Attached scsi generic sg1 type 0
>scsi 6:0:0:0: Attached scsi generic sg2 type 5
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH8 or ICH8R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sr0: scsi3-mmc drive: 0x/50x cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:0:0: Attached scsi CD-ROM sr0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19
>input: PC Speaker as /class/input/input3
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>eth0: RTL8169s/8110s at 0xffffc20000030000, 00:0f:b5:44:41:48, IRQ 16
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt 0000:03:06.0[A] -> GSI 21 (level, low) -> IRQ 21
>eth1: RTL8169sc/8110sc at 0xffffc20000032000, 00:19:db:23:09:f3, IRQ 21
>loop: loaded (max 8 devices)
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
>
>Call Trace:
> [<ffffffff80229e7b>] local_bh_enable+0x42/0x98
> [<ffffffff8025c008>] cond_resched_softirq+0x35/0x4b
> [<ffffffff8022e9f5>] release_sock+0x59/0xaa
> [<ffffffff802252a6>] tcp_sendmsg+0x9ae/0xab8
> [<ffffffff8025d937>] _spin_lock_bh+0x9/0x19
> [<ffffffff8024297c>] sock_aio_write+0x110/0x128
> [<ffffffff80218c67>] vsnprintf+0x55f/0x5a3
> [<ffffffff8024286c>] sock_aio_write+0x0/0x128
> [<ffffffff802cd13d>] do_sync_readv_writev+0xc0/0x107
> [<ffffffff80293107>] autoremove_wake_function+0x0/0x2e
> [<ffffffff8020c716>] do_sync_read+0xc9/0x10c
> [<ffffffff802cd00d>] rw_copy_check_uvector+0x6c/0xdc
> [<ffffffff802cd5ae>] do_readv_writev+0xd7/0x1ae
> [<ffffffff803e83b6>] move_addr_to_user+0x5d/0x78
> [<ffffffff802cd70c>] sys_writev+0x45/0x93
> [<ffffffff8025711e>] system_call+0x7e/0x83
>
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: md0 stopped.
>md: bind<sdb1>
>md: bind<sda1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: md2 stopped.
>md: bind<sdb3>
>md: bind<sda3>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: md5 stopped.
>md: bind<sdb6>
>md: bind<sda6>
>raid1: raid set md5 active with 2 out of 2 mirrors
>md: md4 stopped.
>md: bind<sdb7>
>md: bind<sda7>
>raid1: raid set md4 active with 2 out of 2 mirrors
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on md1, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md5, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md4, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 10482296k swap on /dev/md3.  Priority:-1 extents:1 across:10482296k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>r8169: eth0: link up
>r8169: eth0: link up
>r8169: eth1: link down
>r8169: eth1: link down
>ADDRCONF(NETDEV_UP): eth1: link is not ready
>audit(1181035987.566:3): audit_pid=2063 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>eth0: no IPv6 routers present
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2

Actions: View

Attachments on bug 242639: 156188