Attachment 156196 Details for Bug 240765 – Excerpts from /var/log/messages

Excerpts from /var/log/messages

bootlog (text/plain), 149.11 KB, created by Alec Leamas on 2007-06-05 09:54:58 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Alec Leamas

Created: 2007-06-05 09:54:58 UTC

Size: 149.11 KB

patch

obsolete

>Jun  4 13:41:12 hemulen exiting on signal 15
>Jun  4 13:43:19 hemulen syslogd 1.4.1: restart.
>Jun  4 13:43:19 hemulen kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Jun  4 13:43:19 hemulen kernel: Linux version 2.6.20-1.2952.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:18:22 EDT 2007
>Jun  4 13:43:19 hemulen kernel: Command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:43:19 hemulen kernel: BIOS-provided physical RAM map:
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 000000007feb0000 - 000000007fee3000 (ACPI NVS)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>Jun  4 13:43:19 hemulen kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Jun  4 13:43:19 hemulen kernel: end_pfn_map = 1048576
>Jun  4 13:43:19 hemulen kernel: DMI 2.4 present.
>Jun  4 13:43:19 hemulen kernel: Scanning NUMA topology in Northbridge 24
>Jun  4 13:43:19 hemulen kernel: Number of nodes 1
>Jun  4 13:43:19 hemulen kernel: Node 0 MemBase 0000000000000000 Limit 000000007feb0000
>Jun  4 13:43:19 hemulen kernel: Using node hash shift of 63
>Jun  4 13:43:19 hemulen kernel: Bootmem setup node 0 0000000000000000-000000007feb0000
>Jun  4 13:43:19 hemulen kernel: Zone PFN ranges:
>Jun  4 13:43:19 hemulen kernel:   DMA             0 ->     4096
>Jun  4 13:43:19 hemulen kernel:   DMA32        4096 ->  1048576
>Jun  4 13:43:19 hemulen kernel:   Normal    1048576 ->  1048576
>Jun  4 13:43:19 hemulen rpc.statd[2829]: Version 1.0.10 Starting
>Jun  4 13:43:19 hemulen kernel: early_node_map[2] active PFN ranges
>Jun  4 13:43:19 hemulen kernel:     0:        0 ->      158
>Jun  4 13:43:19 hemulen kernel:     0:      256 ->   523952
>Jun  4 13:43:20 hemulen kernel: ACPI: PM-Timer IO Port: 0x1008
>Jun  4 13:43:20 hemulen kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Jun  4 13:43:20 hemulen kernel: Processor #0 (Bootup-CPU)
>Jun  4 13:43:20 hemulen kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Jun  4 13:43:20 hemulen kernel: Processor #1
>Jun  4 13:43:20 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>Jun  4 13:43:20 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Jun  4 13:43:20 hemulen kernel: ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Jun  4 13:43:20 hemulen kernel: ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Jun  4 13:43:20 hemulen kernel: Using ACPI for processor (LAPIC) configuration information
>Jun  4 13:43:20 hemulen kernel: Intel MultiProcessor Specification v1.4
>Jun  4 13:43:20 hemulen kernel: MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
>Jun  4 13:43:20 hemulen kernel: I/O APIC #2 at 0xFEC00000.
>Jun  4 13:43:20 hemulen kernel: Setting APIC routing to physical flat
>Jun  4 13:43:20 hemulen kernel: Processors: 2
>Jun  4 13:43:20 hemulen kernel: Nosave address range: 000000000009e000 - 000000000009f000
>Jun  4 13:43:20 hemulen kernel: Nosave address range: 000000000009f000 - 00000000000a0000
>Jun  4 13:43:20 hemulen kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
>Jun  4 13:43:20 hemulen kernel: Nosave address range: 00000000000f0000 - 0000000000100000
>Jun  4 13:43:20 hemulen kernel: Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>Jun  4 13:43:20 hemulen kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
>Jun  4 13:43:20 hemulen kernel: PERCPU: Allocating 43264 bytes of per cpu data
>Jun  4 13:43:20 hemulen kernel: Built 1 zonelists.  Total pages: 514344
>Jun  4 13:43:20 hemulen kernel: Kernel command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:43:20 hemulen kernel: Initializing CPU#0
>Jun  4 13:43:20 hemulen kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Jun  4 13:43:20 hemulen kernel: Console: colour VGA+ 80x25
>Jun  4 13:43:20 hemulen kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Jun  4 13:43:20 hemulen kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Jun  4 13:43:21 hemulen kernel: Checking aperture...
>Jun  4 13:43:21 hemulen kernel: CPU 0: aperture @ b1c000000 size 32 MB
>Jun  4 13:43:21 hemulen openvpn[2884]: OpenVPN 2.1_rc2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] built on Mar  3 2007
>Jun  4 13:43:21 hemulen kernel: Aperture too small (32 MB)
>Jun  4 13:43:21 hemulen openvpn[2884]: MANAGEMENT: TCP Socket listening on 127.0.0.1:7505
>Jun  4 13:43:21 hemulen kernel: No AGP bridge found
>Jun  4 13:43:21 hemulen openvpn[2884]: Diffie-Hellman initialized with 1024 bit key
>Jun  4 13:43:21 hemulen kernel: Memory: 2051584k/2095808k available (2454k kernel code, 43832k reserved, 1458k data, 312k init)
>Jun  4 13:43:21 hemulen openvpn[2884]: TLS-Auth MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:43:21 hemulen kernel: Calibrating delay using timer specific routine.. 4424.44 BogoMIPS (lpj=2212222)
>Jun  4 13:43:21 hemulen openvpn[2884]: TUN/TAP device tun0 opened
>Jun  4 13:43:21 hemulen kernel: Security Framework v1.0.0 initialized
>Jun  4 13:43:21 hemulen openvpn[2884]: TUN/TAP TX queue length set to 100
>Jun  4 13:43:21 hemulen kernel: SELinux:  Initializing.
>Jun  4 13:43:21 hemulen openvpn[2884]: /sbin/ip link set dev tun0 up mtu 1500
>Jun  4 13:43:21 hemulen kernel: SELinux:  Starting in permissive mode
>Jun  4 13:43:21 hemulen kernel: selinux_register_security:  Registering secondary module capability
>Jun  4 13:43:21 hemulen openvpn[2884]: /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
>Jun  4 13:43:21 hemulen kernel: Capability LSM initialized as secondary
>Jun  4 13:43:21 hemulen kernel: Mount-cache hash table entries: 256
>Jun  4 13:43:21 hemulen openvpn[2884]: /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
>Jun  4 13:43:21 hemulen kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  4 13:43:21 hemulen openvpn[2884]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:43:21 hemulen kernel: CPU: L2 Cache: 512K (64 bytes/line)
>Jun  4 13:43:21 hemulen openvpn[2894]: Listening for incoming TCP connection on [undef]:1194
>Jun  4 13:43:21 hemulen kernel: CPU 0/0 -> Node 0
>Jun  4 13:43:21 hemulen openvpn[2894]: Socket Buffers: R=[87380->131072] S=[16384->131072]
>Jun  4 13:43:21 hemulen kernel: CPU: Physical Processor ID: 0
>Jun  4 13:43:21 hemulen openvpn[2894]: TCPv4_SERVER link local (bound): [undef]:1194
>Jun  4 13:43:21 hemulen kernel: CPU: Processor Core ID: 0
>Jun  4 13:43:21 hemulen openvpn[2894]: TCPv4_SERVER link remote: [undef]
>Jun  4 13:43:21 hemulen kernel: SMP alternatives: switching to UP code
>Jun  4 13:43:21 hemulen openvpn[2894]: MULTI: multi_init called, r=256 v=256
>Jun  4 13:43:21 hemulen kernel: ACPI: Core revision 20060707
>Jun  4 13:43:21 hemulen openvpn[2894]: IFCONFIG POOL: base=10.8.0.4 size=62
>Jun  4 13:43:21 hemulen kernel: ACPI: setting ELCR to 0200 (from 0ca0)
>Jun  4 13:43:21 hemulen kernel: Using local APIC timer interrupts.
>Jun  4 13:43:21 hemulen kernel: result 12557145
>Jun  4 13:43:21 hemulen kernel: Detected 12.557 MHz APIC timer.
>Jun  4 13:43:21 hemulen kernel: SMP alternatives: switching to SMP code
>Jun  4 13:43:21 hemulen kernel: Booting processor 1/2 APIC 0x1
>Jun  4 13:43:21 hemulen kernel: Initializing CPU#1
>Jun  4 13:43:21 hemulen kernel: Calibrating delay using timer specific routine.. 4420.15 BogoMIPS (lpj=2210079)
>Jun  4 13:43:21 hemulen kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  4 13:43:21 hemulen kernel: CPU: L2 Cache: 512K (64 bytes/line)
>Jun  4 13:43:21 hemulen kernel: CPU 1/1 -> Node 0
>Jun  4 13:43:21 hemulen kernel: CPU: Physical Processor ID: 0
>Jun  4 13:43:21 hemulen kernel: CPU: Processor Core ID: 1
>Jun  4 13:43:21 hemulen kernel: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Jun  4 13:43:21 hemulen kernel: CPU 1: Syncing TSC to CPU 0.
>Jun  4 13:43:21 hemulen kernel: CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 566 cycles)
>Jun  4 13:43:21 hemulen kernel: Brought up 2 CPUs
>Jun  4 13:43:21 hemulen kernel: time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
>Jun  4 13:43:21 hemulen kernel: time.c: Detected 2210.057 MHz processor.
>Jun  4 13:43:21 hemulen openvpn[2894]: IFCONFIG POOL LIST
>Jun  4 13:43:21 hemulen openvpn[2894]: lilla-my,10.8.0.4
>Jun  4 13:43:21 hemulen kernel: migration_cost=222
>Jun  4 13:43:21 hemulen openvpn[2894]: knyttet,10.8.0.8
>Jun  4 13:43:21 hemulen kernel: NET: Registered protocol family 16
>Jun  4 13:43:21 hemulen openvpn[2894]: lilla-my,10.8.0.12
>Jun  4 13:43:21 hemulen kernel: ACPI: bus type pci registered
>Jun  4 13:43:21 hemulen openvpn[2894]: MULTI: TCP INIT maxclients=1024 maxevents=1028
>Jun  4 13:43:21 hemulen kernel: PCI: Using configuration type 1
>Jun  4 13:43:21 hemulen openvpn[2894]: Initialization Sequence Completed
>Jun  4 13:43:21 hemulen kernel: ACPI: Interpreter enabled
>Jun  4 13:43:21 hemulen kernel: ACPI: Using PIC for interrupt routing
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Jun  4 13:43:21 hemulen kernel: PCI: Transparent bridge - 0000:00:0e.0
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:43:21 hemulen hcid[2916]: Bluetooth HCI daemon
>Jun  4 13:43:21 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:43:21 hemulen hcid[2916]: Register path:/org/bluez fallback:1
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:43:22 hemulen hcid[2916]: HCI dev 0 registered
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen sdpd[2920]: Bluetooth SDP daemon 
>Jun  4 13:43:22 hemulen hcid[2916]: Register path:/org/bluez/hci0 fallback:0
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:43:22 hemulen hcid[2916]: HCI dev 0 up
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:22 hemulen hcid[2916]: Device hci0 has been added
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen hcid[2916]: Starting security manager 0
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:43:22 hemulen hcid[2916]: Device hci0 has been activated
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:43:22 hemulen kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Jun  4 13:43:22 hemulen kernel: pnp: PnP ACPI init
>Jun  4 13:43:22 hemulen kernel: pnp: PnP ACPI: found 14 devices
>Jun  4 13:43:22 hemulen kernel: usbcore: registered new interface driver usbfs
>Jun  4 13:43:22 hemulen kernel: usbcore: registered new interface driver hub
>Jun  4 13:43:22 hemulen kernel: usbcore: registered new device driver usb
>Jun  4 13:43:22 hemulen hidd[2983]: Bluetooth HID daemon
>Jun  4 13:43:22 hemulen kernel: PCI: Using ACPI for IRQ routing
>Jun  4 13:43:22 hemulen kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Jun  4 13:43:22 hemulen kernel: NetLabel: Initializing
>Jun  4 13:43:22 hemulen kernel: NetLabel:  domain hash size = 128
>Jun  4 13:43:22 hemulen kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Jun  4 13:43:22 hemulen kernel: NetLabel:  unlabeled traffic allowed by default
>Jun  4 13:43:22 hemulen kernel: hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>Jun  4 13:43:22 hemulen kernel: hpet0: 3 32-bit timers, 25000000 Hz
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>Jun  4 13:43:22 hemulen kernel: pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:04.0
>Jun  4 13:43:22 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:22 hemulen kernel:   MEM window: disabled.
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:0e.0
>Jun  4 13:43:22 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:22 hemulen kernel:   MEM window: fdf00000-fdffffff
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:03:00.0
>Jun  4 13:43:22 hemulen kernel:   IO window: a000-afff
>Jun  4 13:43:22 hemulen kernel:   MEM window: fdc00000-fddfffff
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:03:00.1
>Jun  4 13:43:22 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:22 hemulen kernel:   MEM window: disabled.
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:12.0
>Jun  4 13:43:22 hemulen kernel:   IO window: a000-afff
>Jun  4 13:43:22 hemulen kernel:   MEM window: fdc00000-fdefffff
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:14.0
>Jun  4 13:43:22 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:22 hemulen kernel:   MEM window: disabled.
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:15.0
>Jun  4 13:43:22 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:22 hemulen kernel:   MEM window: disabled.
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:16.0
>Jun  4 13:43:22 hemulen kernel:   IO window: 9000-9fff
>Jun  4 13:43:22 hemulen kernel:   MEM window: fdb00000-fdbfffff
>Jun  4 13:43:22 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:43:22 hemulen kernel: PCI: Bridge: 0000:00:17.0
>Jun  4 13:43:23 hemulen automount[3010]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
>Jun  4 13:43:23 hemulen kernel:   IO window: disabled.
>Jun  4 13:43:23 hemulen kernel:   MEM window: f4000000-fbffffff
>Jun  4 13:43:23 hemulen kernel:   PREFETCH window: e8000000-efffffff
>Jun  4 13:43:23 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
>Jun  4 13:43:23 hemulen kernel: ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:23 hemulen kernel: NET: Registered protocol family 2
>Jun  4 13:43:23 hemulen kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>Jun  4 13:43:23 hemulen kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>Jun  4 13:43:23 hemulen kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>Jun  4 13:43:23 hemulen kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Jun  4 13:43:23 hemulen kernel: TCP reno registered
>Jun  4 13:43:23 hemulen kernel: checking if image is initramfs... it is
>Jun  4 13:43:23 hemulen kernel: Freeing initrd memory: 2397k freed
>Jun  4 13:43:23 hemulen kernel: audit: initializing netlink socket (disabled)
>Jun  4 13:43:23 hemulen kernel: audit(1180957364.543:1): initialized
>Jun  4 13:43:23 hemulen kernel: Total HugeTLB memory allocated, 0
>Jun  4 13:43:23 hemulen kernel: VFS: Disk quotas dquot_6.5.1
>Jun  4 13:43:23 hemulen kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Jun  4 13:43:23 hemulen kernel: SELinux:  Registering netfilter hooks
>Jun  4 13:43:23 hemulen kernel: ksign: Installing public key data
>Jun  4 13:43:23 hemulen kernel: Loading keyring
>Jun  4 13:43:23 hemulen kernel: - Added public key A2C7955D82CFA151
>Jun  4 13:43:23 hemulen kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Jun  4 13:43:23 hemulen kernel: io scheduler noop registered
>Jun  4 13:43:23 hemulen kernel: io scheduler anticipatory registered
>Jun  4 13:43:23 hemulen kernel: io scheduler deadline registered
>Jun  4 13:43:23 hemulen kernel: io scheduler cfq registered (default)
>Jun  4 13:43:23 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:43:23 hemulen last message repeated 5 times
>Jun  4 13:43:23 hemulen kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Jun  4 13:43:23 hemulen kernel: ACPI: Fan [FAN] (on)
>Jun  4 13:43:23 hemulen kernel: ACPI: Thermal Zone [THRM] (40 C)
>Jun  4 13:43:23 hemulen kernel: Real Time Clock Driver v1.12ac
>Jun  4 13:43:23 hemulen kernel: Non-volatile memory driver v1.2
>Jun  4 13:43:23 hemulen kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Jun  4 13:43:23 hemulen kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Jun  4 13:43:23 hemulen kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  4 13:43:23 hemulen kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  4 13:43:23 hemulen kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Jun  4 13:43:23 hemulen kernel: input: Macintosh mouse button emulation as /class/input/input0
>Jun  4 13:43:23 hemulen kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Jun  4 13:43:24 hemulen hpiod: 1.7.2 accepting connections at 2208... 
>Jun  4 13:43:24 hemulen kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Jun  4 13:43:24 hemulen kernel: NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
>Jun  4 13:43:24 hemulen kernel: NFORCE-MCP55: chipset revision 161
>Jun  4 13:43:24 hemulen kernel: NFORCE-MCP55: not 100% native mode: will probe irqs later
>Jun  4 13:43:24 hemulen kernel: NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
>Jun  4 13:43:24 hemulen kernel: NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
>Jun  4 13:43:24 hemulen kernel:     ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
>Jun  4 13:43:24 hemulen kernel: hdb: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
>Jun  4 13:43:24 hemulen kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Jun  4 13:43:24 hemulen kernel: ide-floppy driver 0.99.newide
>Jun  4 13:43:24 hemulen kernel: usbcore: registered new interface driver libusual
>Jun  4 13:43:24 hemulen kernel: usbcore: registered new interface driver hiddev
>Jun  4 13:43:24 hemulen kernel: usbcore: registered new interface driver usbhid
>Jun  4 13:43:24 hemulen kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Jun  4 13:43:24 hemulen kernel: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>Jun  4 13:43:24 hemulen kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
>Jun  4 13:43:24 hemulen kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Jun  4 13:43:24 hemulen kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Jun  4 13:43:24 hemulen kernel: mice: PS/2 mouse device common for all mice
>Jun  4 13:43:24 hemulen kernel: TCP bic registered
>Jun  4 13:43:24 hemulen kernel: Initializing XFRM netlink socket
>Jun  4 13:43:24 hemulen kernel: NET: Registered protocol family 1
>Jun  4 13:43:24 hemulen kernel: NET: Registered protocol family 17
>Jun  4 13:43:24 hemulen kernel: powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>Jun  4 13:43:24 hemulen kernel: powernow-k8: MP systems not supported by PSB BIOS structure
>Jun  4 13:43:24 hemulen kernel: powernow-k8: MP systems not supported by PSB BIOS structure
>Jun  4 13:43:24 hemulen kernel: ACPI: (supports S0 S1 S3 S4 S5)
>Jun  4 13:43:24 hemulen kernel: Freeing unused kernel memory: 312k freed
>Jun  4 13:43:24 hemulen kernel: Write protecting the kernel read-only data: 1042k
>Jun  4 13:43:24 hemulen kernel: firmware_class: attempt to set timeout to 10
>Jun  4 13:43:24 hemulen kernel: USB Universal Host Controller Interface driver v3.0
>Jun  4 13:43:24 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
>Jun  4 13:43:24 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
>Jun  4 13:43:24 hemulen kernel: ohci_hcd 0000:00:0a.0: OHCI Host Controller
>Jun  4 13:43:25 hemulen kernel: ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>Jun  4 13:43:25 hemulen kernel: ohci_hcd 0000:00:0a.0: irq 7, io mem 0xfe02f000
>Jun  4 13:43:25 hemulen kernel: input: PS2++ Logitech Wheel Mouse as /class/input/input1
>Jun  4 13:43:25 hemulen kernel: usb usb1: configuration #1 chosen from 1 choice
>Jun  4 13:43:25 hemulen kernel: hub 1-0:1.0: USB hub found
>Jun  4 13:43:25 hemulen kernel: hub 1-0:1.0: 10 ports detected
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:25 hemulen kernel: ehci_hcd 0000:00:0a.1: EHCI Host Controller
>Jun  4 13:43:25 hemulen kernel: ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>Jun  4 13:43:25 hemulen kernel: ehci_hcd 0000:00:0a.1: debug port 1
>Jun  4 13:43:25 hemulen kernel: ehci_hcd 0000:00:0a.1: irq 5, io mem 0xfe02e000
>Jun  4 13:43:25 hemulen kernel: ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Jun  4 13:43:25 hemulen kernel: usb usb2: configuration #1 chosen from 1 choice
>Jun  4 13:43:25 hemulen kernel: hub 2-0:1.0: USB hub found
>Jun  4 13:43:25 hemulen kernel: hub 2-0:1.0: 10 ports detected
>Jun  4 13:43:25 hemulen kernel: SCSI subsystem initialized
>Jun  4 13:43:25 hemulen kernel: Fusion MPT base driver 3.04.03
>Jun  4 13:43:25 hemulen kernel: Copyright (c) 1999-2007 LSI Logic Corporation
>Jun  4 13:43:25 hemulen kernel: Fusion MPT SPI Host driver 3.04.03
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [LNK8] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:43:25 hemulen kernel: mptbase: Initiating ioc0 bringup
>Jun  4 13:43:25 hemulen kernel: ioc0: 53C1030: Capabilities={Initiator}
>Jun  4 13:43:25 hemulen kernel: scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=11
>Jun  4 13:43:25 hemulen kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2
>Jun  4 13:43:25 hemulen kernel: usb 1-3: configuration #1 chosen from 1 choice
>Jun  4 13:43:25 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input2
>Jun  4 13:43:25 hemulen kernel: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:43:25 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input3
>Jun  4 13:43:25 hemulen kernel: input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:43:25 hemulen kernel: usb 1-4: new full speed USB device using ohci_hcd and address 3
>Jun  4 13:43:25 hemulen kernel: usb 1-4: configuration #1 chosen from 1 choice
>Jun  4 13:43:25 hemulen kernel: usb 1-10: new full speed USB device using ohci_hcd and address 4
>Jun  4 13:43:25 hemulen kernel: scsi 0:0:0:0: Direct-Access     LSILOGIC RAID ARRAY    IS 1000 PQ: 0 ANSI: 2
>Jun  4 13:43:25 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:43:25 hemulen kernel: sda: Write Protect is off
>Jun  4 13:43:25 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:25 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:43:25 hemulen kernel: sda: Write Protect is off
>Jun  4 13:43:25 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:25 hemulen kernel:  sda: sda1 sda2
>Jun  4 13:43:25 hemulen kernel: sd 0:0:0:0: Attached scsi disk sda
>Jun  4 13:43:25 hemulen kernel: usb 1-10: configuration #1 chosen from 2 choices
>Jun  4 13:43:25 hemulen kernel: scsi 0:1:0:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:43:25 hemulen kernel:  target0:1:0: Beginning Domain Validation
>Jun  4 13:43:25 hemulen kernel:  target0:1:0: Ending Domain Validation
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:43:25 hemulen kernel:  target0:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:43:25 hemulen kernel: scsi 0:1:2:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:43:25 hemulen kernel:  target0:1:2: Beginning Domain Validation
>Jun  4 13:43:25 hemulen kernel:  target0:1:2: Ending Domain Validation
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:43:25 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:43:25 hemulen kernel:  target0:1:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
>Jun  4 13:43:25 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.1[B] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:43:25 hemulen kernel: mptbase: Initiating ioc1 bringup
>Jun  4 13:43:25 hemulen kernel: ioc1: 53C1030: Capabilities={Initiator}
>Jun  4 13:43:25 hemulen kernel: scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=10
>Jun  4 13:43:25 hemulen kernel: shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
>Jun  4 13:43:25 hemulen kernel: shpchp: Can't get msi for the hotplug controller
>Jun  4 13:43:25 hemulen kernel: shpchp: Use INTx for the hotplug controller
>Jun  4 13:43:26 hemulen kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt Link [LSID] enabled at IRQ 5
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LSID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:26 hemulen kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 5
>Jun  4 13:43:26 hemulen kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 5
>Jun  4 13:43:26 hemulen kernel: scsi2 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>Jun  4 13:43:26 hemulen kernel: ata1.00: ata1: dev 0 multi count 1
>Jun  4 13:43:26 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:26 hemulen kernel: scsi3 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata2: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ATA: abnormal status 0x7F on port 0x977
>Jun  4 13:43:26 hemulen kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>Jun  4 13:43:26 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:43:26 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:43:26 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:26 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:43:26 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:43:26 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:26 hemulen kernel:  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>Jun  4 13:43:26 hemulen kernel: sd 2:0:0:0: Attached scsi disk sdb
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LFID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:26 hemulen kernel: ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 5
>Jun  4 13:43:26 hemulen kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 5
>Jun  4 13:43:26 hemulen kernel: scsi4 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata3: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ATA: abnormal status 0x7F on port 0x9E7
>Jun  4 13:43:26 hemulen kernel: scsi5 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata4: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ATA: abnormal status 0x7F on port 0x967
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 5
>Jun  4 13:43:26 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LSA2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:26 hemulen kernel: ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 5
>Jun  4 13:43:26 hemulen kernel: ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 5
>Jun  4 13:43:26 hemulen kernel: scsi6 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata5: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ATA: abnormal status 0x7F on port 0xC807
>Jun  4 13:43:26 hemulen kernel: scsi7 : sata_nv
>Jun  4 13:43:26 hemulen kernel: ata6: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:43:26 hemulen kernel: ATA: abnormal status 0x7F on port 0xC007
>Jun  4 13:43:26 hemulen kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Jun  4 13:43:26 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:43:26 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:43:26 hemulen kernel: SELinux:  Disabled at runtime.
>Jun  4 13:43:26 hemulen kernel: SELinux:  Unregistering netfilter hooks
>Jun  4 13:43:26 hemulen kernel: audit(1180957380.665:2): selinux=0 auid=4294967295
>Jun  4 13:43:26 hemulen kernel: cdc_acm 1-10:1.0: ttyACM0: USB ACM device
>Jun  4 13:43:26 hemulen kernel: usbcore: registered new interface driver cdc_acm
>Jun  4 13:43:26 hemulen kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
>Jun  4 13:43:27 hemulen kernel: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hdb: hw_config=4101
>Jun  4 13:43:27 hemulen kernel: , UDMA(66)
>Jun  4 13:43:27 hemulen kernel: Uniform CD-ROM driver Revision: 3.20
>Jun  4 13:43:27 hemulen kernel: Bluetooth: Core ver 2.11
>Jun  4 13:43:27 hemulen kernel: NET: Registered protocol family 31
>Jun  4 13:43:27 hemulen kernel: Bluetooth: HCI device and connection manager initialized
>Jun  4 13:43:27 hemulen kernel: Bluetooth: HCI socket layer initialized
>Jun  4 13:43:27 hemulen kernel: parport: PnPBIOS parport detected.
>Jun  4 13:43:27 hemulen kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Jun  4 13:43:27 hemulen kernel: IRQ handler type mismatch for IRQ 7
>Jun  4 13:43:27 hemulen kernel: current handler: ohci_hcd:usb1
>Jun  4 13:43:27 hemulen kernel: 
>Jun  4 13:43:27 hemulen kernel: Call Trace:
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff802b1519>] setup_irq+0x1bf/0x1e5
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff8816015e>] :parport_pc:parport_pc_interrupt+0x0/0x4b
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff802b15d0>] request_irq+0x91/0xb4
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff8815ff42>] :parport_pc:parport_pc_probe_port+0x6e1/0x835
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff88160140>] :parport_pc:parport_pc_pnp_probe+0xaa/0xc8
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff80386046>] pnp_device_probe+0x7b/0x9e
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803a9ec8>] really_probe+0x87/0x106
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803aa119>] __driver_attach+0x90/0xcd
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803aa089>] __driver_attach+0x0/0xcd
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803aa089>] __driver_attach+0x0/0xcd
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803a93a2>] bus_for_each_dev+0x43/0x6e
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff803a96ea>] bus_add_driver+0x6b/0x18d
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff8813b393>] :parport_pc:parport_pc_init+0x2b2/0x356
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff802979e4>] kthread_stop+0x75/0x79
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff8029f98a>] sys_init_module+0x1797/0x1904
>Jun  4 13:43:27 hemulen kernel:  [<ffffffff8025a11e>] system_call+0x7e/0x83
>Jun  4 13:43:27 hemulen kernel: 
>Jun  4 13:43:27 hemulen kernel: parport0: irq 7 in use, resorting to polled operation
>Jun  4 13:43:27 hemulen kernel: Bluetooth: HCI USB driver ver 2.9
>Jun  4 13:43:27 hemulen kernel: usbcore: registered new interface driver hci_usb
>Jun  4 13:43:27 hemulen kernel: EDAC MC: Ver: 2.0.1 May 16 2007
>Jun  4 13:43:27 hemulen kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Jun  4 13:43:27 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
>Jun  4 13:43:27 hemulen kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:43:27 hemulen kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Jun  4 13:43:28 hemulen kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>Jun  4 13:43:28 hemulen kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>Jun  4 13:43:28 hemulen kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:43:28 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:43:28 hemulen kernel: input: PC Speaker as /class/input/input4
>Jun  4 13:43:28 hemulen kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Jun  4 13:43:28 hemulen kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0
>Jun  4 13:43:28 hemulen kernel: scsi 0:1:2:0: Attached scsi generic sg2 type 0
>Jun  4 13:43:28 hemulen kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0
>Jun  4 13:43:28 hemulen kernel: Floppy drive(s): fd0 is 1.44M
>Jun  4 13:43:28 hemulen kernel: FDC 0 is a post-1991 82077
>Jun  4 13:43:28 hemulen kernel: eth0: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:10.0
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 5
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LMC1] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:43:28 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:43:28 hemulen kernel: eth1: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:11.0
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
>Jun  4 13:43:28 hemulen kernel: ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:43:28 hemulen kernel: hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>Jun  4 13:43:28 hemulen kernel: lp0: using parport0 (polling).
>Jun  4 13:43:28 hemulen kernel: lp0: console ready
>Jun  4 13:43:28 hemulen kernel: NET: Registered protocol family 10
>Jun  4 13:43:28 hemulen kernel: lo: Disabled Privacy Extensions
>Jun  4 13:43:28 hemulen kernel: Mobile IPv6
>Jun  4 13:43:28 hemulen kernel: input: Power Button (FF) as /class/input/input5
>Jun  4 13:43:28 hemulen kernel: ACPI: Power Button (FF) [PWRF]
>Jun  4 13:43:28 hemulen kernel: input: Power Button (CM) as /class/input/input6
>Jun  4 13:43:28 hemulen kernel: ACPI: Power Button (CM) [PWRB]
>Jun  4 13:43:28 hemulen kernel: No dock devices found.
>Jun  4 13:43:28 hemulen kernel: ibm_acpi: ec object not found
>Jun  4 13:43:28 hemulen kernel: md: Autodetecting RAID arrays.
>Jun  4 13:43:29 hemulen kernel: md: autorun ...
>Jun  4 13:43:29 hemulen kernel: md: ... autorun DONE.
>Jun  4 13:43:29 hemulen kernel: device-mapper: multipath: version 1.0.5 loaded
>Jun  4 13:43:29 hemulen kernel: EXT3 FS on dm-0, internal journal
>Jun  4 13:43:29 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:43:29 hemulen kernel: EXT3 FS on sda1, internal journal
>Jun  4 13:43:29 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:43:29 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:43:29 hemulen kernel: EXT3 FS on dm-1, internal journal
>Jun  4 13:43:29 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:43:29 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:43:29 hemulen kernel: EXT3 FS on dm-3, internal journal
>Jun  4 13:43:29 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:43:29 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:43:29 hemulen kernel: EXT3 FS on dm-2, internal journal
>Jun  4 13:43:29 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:43:29 hemulen kernel: Adding 1614524k swap on /dev/sdb3.  Priority:-1 extents:1 across:1614524k
>Jun  4 13:43:29 hemulen kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-2 extents:1 across:2031608k
>Jun  4 13:43:29 hemulen kernel: tun: Universal TUN/TAP device driver, 1.6
>Jun  4 13:43:29 hemulen kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Jun  4 13:43:29 hemulen kernel: Bluetooth: L2CAP ver 2.8
>Jun  4 13:43:29 hemulen kernel: Bluetooth: L2CAP socket layer initialized
>Jun  4 13:43:29 hemulen kernel: Bluetooth: RFCOMM socket layer initialized
>Jun  4 13:43:29 hemulen kernel: Bluetooth: RFCOMM TTY layer initialized
>Jun  4 13:43:29 hemulen kernel: Bluetooth: RFCOMM ver 1.8
>Jun  4 13:43:29 hemulen kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Jun  4 13:43:29 hemulen xinetd[3109]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Jun  4 13:43:29 hemulen xinetd[3109]: Started working: 2 available services
>Jun  4 13:43:33 hemulen openvpn[2894]: MULTI: multi_create_instance called
>Jun  4 13:43:33 hemulen openvpn[2894]: Re-using SSL/TLS context
>Jun  4 13:43:33 hemulen openvpn[2894]: LZO compression initialized
>Jun  4 13:43:33 hemulen openvpn[2894]: Control Channel MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:43:33 hemulen openvpn[2894]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:43:33 hemulen openvpn[2894]: Local Options hash (VER=V4): 'c0103fa8'
>Jun  4 13:43:33 hemulen openvpn[2894]: Expected Remote Options hash (VER=V4): '69109d17'
>Jun  4 13:43:33 hemulen openvpn[2894]: TCP connection established with 83.183.6.13:55961
>Jun  4 13:43:33 hemulen openvpn[2894]: Socket Buffers: R=[131072->131072] S=[131072->131072]
>Jun  4 13:43:33 hemulen openvpn[2894]: TCPv4_SERVER link local: [undef]
>Jun  4 13:43:33 hemulen openvpn[2894]: TCPv4_SERVER link remote: 83.183.6.13:55961
>Jun  4 13:43:34 hemulen openvpn[2894]: 83.183.6.13:55961 TLS: Initial packet from 83.183.6.13:55961, sid=f0940417 eaa7ba78
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 VERIFY OK: depth=1, /C=SE/ST=BD/L=Lulea/O=KLN/CN=KLN/emailAddress=kln@kolmodin.net
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 VERIFY OK: depth=0, /C=SE/ST=CA/L=Lulea/O=KLN/CN=lilla-my/emailAddress=mk@kolmodin.net
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
>Jun  4 13:43:36 hemulen openvpn[2894]: 83.183.6.13:55961 [lilla-my] Peer Connection Initiated with 83.183.6.13:55961
>Jun  4 13:43:36 hemulen openvpn[2894]: lilla-my/83.183.6.13:55961 MULTI: Learn: 10.8.0.6 -> lilla-my/83.183.6.13:55961
>Jun  4 13:43:36 hemulen openvpn[2894]: lilla-my/83.183.6.13:55961 MULTI: primary virtual IP for lilla-my/83.183.6.13:55961: 10.8.0.6
>Jun  4 13:43:37 hemulen openvpn[2894]: lilla-my/83.183.6.13:55961 PUSH: Received control message: 'PUSH_REQUEST'
>Jun  4 13:43:37 hemulen openvpn[2894]: lilla-my/83.183.6.13:55961 SENT CONTROL [lilla-my]: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' (status=1)
>Jun  4 13:43:40 hemulen ntpdate[3129]: step time server 63.119.46.3 offset -0.441486 sec
>Jun  4 13:43:40 hemulen ntpd[3131]: ntpd 4.2.4p0@1.1472 Wed Mar  7 18:53:03 UTC 2007 (1)
>Jun  4 13:43:40 hemulen ntpd[3132]: precision = 1.000 usec
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #1 wildcard, ::#123 Disabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #2 eth0, fe80::217:31ff:fec4:640c#123 Enabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #3 lo, ::1#123 Enabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #5 eth0, 192.168.0.100#123 Enabled
>Jun  4 13:43:40 hemulen ntpd[3132]: Listening on interface #6 tun0, 10.8.0.1#123 Enabled
>Jun  4 13:43:40 hemulen ntpd[3132]: kernel time sync status 0040
>Jun  4 13:43:40 hemulen ntpd[3132]: frequency initialized 133.555 PPM from /var/lib/ntp/drift
>Jun  4 13:43:41 hemulen gpm[3217]: *** info [startup.c(95)]: 
>Jun  4 13:43:41 hemulen gpm[3217]: Started gpm successfully. Entered daemon mode.
>Jun  4 13:43:42 hemulen saslauthd[3320]: detach_tty      : master pid is: 3320
>Jun  4 13:43:42 hemulen saslauthd[3320]: ipc_init        : listening on socket: /var/run/saslauthd/mux
>Jun  4 13:43:54 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:54 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:54 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:54 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:54 hemulen kernel: ata1: EH complete
>Jun  4 13:43:54 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:54 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:54 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:54 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:54 hemulen kernel: ata1: EH complete
>Jun  4 13:43:54 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:54 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:54 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:55 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:55 hemulen kernel: ata1: EH complete
>Jun  4 13:43:55 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:55 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:55 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:55 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:55 hemulen kernel: ata1: EH complete
>Jun  4 13:43:55 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:55 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:55 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:55 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:55 hemulen kernel: ata1: EH complete
>Jun  4 13:43:55 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:43:55 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:43:55 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:43:55 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:43:55 hemulen kernel: ata1: EH complete
>Jun  4 13:43:55 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:43:55 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:43:55 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:55 hemulen smartd[3507]: smartd version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
>Jun  4 13:43:55 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:43:55 hemulen smartd[3507]: Home page is http://smartmontools.sourceforge.net/  
>Jun  4 13:43:55 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:43:55 hemulen smartd[3507]: Opened configuration file /etc/smartd.conf 
>Jun  4 13:43:55 hemulen smartd[3507]: Configuration file /etc/smartd.conf parsed. 
>Jun  4 13:43:55 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:43:55 hemulen smartd[3507]: Device: /dev/sda, opened 
>Jun  4 13:43:55 hemulen smartd[3507]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features 
>Jun  4 13:43:55 hemulen smartd[3507]: Unable to register SCSI device /dev/sda at line 32 of file /etc/smartd.conf 
>Jun  4 13:43:55 hemulen smartd[3507]: Device /dev/sda not available 
>Jun  4 13:43:55 hemulen smartd[3507]: Device: /dev/sdb, opened 
>Jun  4 13:43:55 hemulen smartd[3507]: Device: /dev/sdb, found in smartd database. 
>Jun  4 13:43:55 hemulen smartd[3507]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
>Jun  4 13:43:55 hemulen smartd[3507]: Monitoring 1 ATA and 0 SCSI devices 
>Jun  4 13:43:55 hemulen smartd[3509]: smartd has fork()ed into background mode. New PID=3509. 
>Jun  4 13:43:56 hemulen gdm[3529]: (null): cannot open shared object file: No such file or directory
>Jun  4 13:43:57 hemulen gdm[3611]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
>Jun  4 13:44:01 hemulen gdm[3627]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
>Jun  4 13:44:05 hemulen gdm[3638]: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
>Jun  4 13:44:05 hemulen gdm[3529]: deal_with_x_crashes: Running the XKeepsCrashing script
>Jun  4 13:44:39 hemulen gconfd (root-3748): starting (version 2.14.0), pid 3748 user 'root'
>Jun  4 13:44:39 hemulen gconfd (root-3748): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>Jun  4 13:44:39 hemulen gconfd (root-3748): Resolved address "xml:readwrite:/root/.gconf" to a writable configuration source at position 1
>Jun  4 13:44:39 hemulen gconfd (root-3748): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>Jun  4 13:45:08 hemulen gconfd (mk-3850): starting (version 2.14.0), pid 3850 user 'mk'
>Jun  4 13:45:08 hemulen gconfd (mk-3850): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>Jun  4 13:45:08 hemulen gconfd (mk-3850): Resolved address "xml:readwrite:/home/mk/.gconf" to a writable configuration source at position 1
>Jun  4 13:45:08 hemulen gconfd (mk-3850): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>Jun  4 13:45:09 hemulen gconfd (root-3748): GConf server is not in use, shutting down.
>Jun  4 13:45:10 hemulen gconfd (root-3748): Exiting
>Jun  4 13:45:11 hemulen gconfd (mk-3850): Resolved address "xml:readwrite:/home/mk/.gconf" to a writable configuration source at position 0
>Jun  4 13:45:11 hemulen hcid[2916]: Default passkey agent (:1.6, /org/bluez/applet) registered
>Jun  4 13:46:05 hemulen gnome-power-manager: (mk) Suspending computer because the DBUS method Suspend() was invoked
>Jun  4 13:46:05 hemulen gnome-power-manager: (mk) Resuming computer
>Jun  4 13:46:59 hemulen ntpd[3132]: synchronized to LOCAL(0), stratum 10
>Jun  4 13:46:59 hemulen ntpd[3132]: kernel time sync enabled 0001
>Jun  4 13:47:46 hemulen shutdown[4173]: shutting down for system reboot
>Jun  4 13:47:46 hemulen gconfd (mk-3850): Received signal 15, shutting down cleanly
>Jun  4 13:47:46 hemulen gconfd (mk-3850): Exiting
>Jun  4 13:47:46 hemulen escd: *** glibc detected *** ./escd: double free or corruption (out): 0x00007fff0c05c850 *** 
>Jun  4 13:47:51 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:47:51 hemulen kernel: EXT3 FS on dm-8, internal journal
>Jun  4 13:47:51 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:47:51 hemulen gconfd (mk-4227): starting (version 2.14.0), pid 4227 user 'mk'
>Jun  4 13:47:51 hemulen gconfd (mk-4227): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>Jun  4 13:47:51 hemulen gconfd (mk-4227): Resolved address "xml:readwrite:/home/mk/.gconf" to a writable configuration source at position 1
>Jun  4 13:47:51 hemulen gconfd (mk-4227): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>Jun  4 13:47:52 hemulen smartd[3509]: smartd received signal 15: Terminated 
>Jun  4 13:47:52 hemulen smartd[3509]: smartd is exiting (exit status 0) 
>Jun  4 13:47:52 hemulen libvirt-qemud: Shutting down on signal 15
>Jun  4 13:47:53 hemulen saslauthd[3320]: server_exit     : master exited: 3320
>Jun  4 13:47:54 hemulen ddclient[3167]: WARNING:  caught SIGTERM; exiting
>Jun  4 13:47:55 hemulen xinetd[3109]: Exiting...
>Jun  4 13:47:59 hemulen ntpd[3132]: ntpd exiting on signal 15
>Jun  4 13:47:59 hemulen openvpn[2894]: TCP/UDP: Closing socket
>Jun  4 13:47:59 hemulen openvpn[2894]: TCP/UDP: Closing socket
>Jun  4 13:47:59 hemulen openvpn[2894]: /sbin/ip route del 10.8.0.0/24
>Jun  4 13:47:59 hemulen openvpn[2894]: Closing TUN/TAP interface
>Jun  4 13:47:59 hemulen openvpn[2894]: SIGTERM[hard,] received, process exiting
>Jun  4 13:47:59 hemulen hcid[2916]: Got disconnected from the system message bus
>Jun  4 13:47:59 hemulen rpc.statd[2829]: Caught signal 15, un-registering and exiting.
>Jun  4 13:47:59 hemulen portmap[4690]: connect from 127.0.0.1 to unset(status): request from unprivileged port
>Jun  4 13:47:59 hemulen kernel: Kernel logging (proc) stopped.
>Jun  4 13:47:59 hemulen kernel: Kernel log daemon terminating.
>Jun  4 13:48:00 hemulen exiting on signal 15
>Jun  4 13:50:08 hemulen syslogd 1.4.1: restart.
>Jun  4 13:50:08 hemulen kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Jun  4 13:50:08 hemulen kernel: Linux version 2.6.20-1.2952.fc6 (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:18:22 EDT 2007
>Jun  4 13:50:08 hemulen kernel: Command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:50:08 hemulen kernel: BIOS-provided physical RAM map:
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 000000007feb0000 - 000000007fee3000 (ACPI NVS)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
>Jun  4 13:50:08 hemulen kernel:  BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Jun  4 13:50:08 hemulen kernel: end_pfn_map = 1048576
>Jun  4 13:50:08 hemulen kernel: DMI 2.4 present.
>Jun  4 13:50:08 hemulen kernel: Scanning NUMA topology in Northbridge 24
>Jun  4 13:50:08 hemulen kernel: Number of nodes 1
>Jun  4 13:50:08 hemulen kernel: Node 0 MemBase 0000000000000000 Limit 000000007feb0000
>Jun  4 13:50:08 hemulen kernel: Using node hash shift of 63
>Jun  4 13:50:08 hemulen kernel: Bootmem setup node 0 0000000000000000-000000007feb0000
>Jun  4 13:50:08 hemulen kernel: Zone PFN ranges:
>Jun  4 13:50:08 hemulen kernel:   DMA             0 ->     4096
>Jun  4 13:50:08 hemulen kernel:   DMA32        4096 ->  1048576
>Jun  4 13:50:08 hemulen kernel:   Normal    1048576 ->  1048576
>Jun  4 13:50:08 hemulen kernel: early_node_map[2] active PFN ranges
>Jun  4 13:50:08 hemulen kernel:     0:        0 ->      158
>Jun  4 13:50:08 hemulen kernel:     0:      256 ->   523952
>Jun  4 13:50:08 hemulen rpc.statd[2669]: Version 1.0.10 Starting
>Jun  4 13:50:08 hemulen kernel: ACPI: PM-Timer IO Port: 0x1008
>Jun  4 13:50:08 hemulen kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Jun  4 13:50:08 hemulen kernel: Processor #0 (Bootup-CPU)
>Jun  4 13:50:08 hemulen kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Jun  4 13:50:08 hemulen kernel: Processor #1
>Jun  4 13:50:08 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>Jun  4 13:50:08 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Jun  4 13:50:08 hemulen kernel: ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Jun  4 13:50:08 hemulen kernel: ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Jun  4 13:50:08 hemulen kernel: Using ACPI for processor (LAPIC) configuration information
>Jun  4 13:50:08 hemulen kernel: Intel MultiProcessor Specification v1.4
>Jun  4 13:50:08 hemulen kernel: MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
>Jun  4 13:50:08 hemulen kernel: I/O APIC #2 at 0xFEC00000.
>Jun  4 13:50:08 hemulen kernel: Setting APIC routing to physical flat
>Jun  4 13:50:08 hemulen kernel: Processors: 2
>Jun  4 13:50:08 hemulen kernel: Nosave address range: 000000000009e000 - 000000000009f000
>Jun  4 13:50:08 hemulen kernel: Nosave address range: 000000000009f000 - 00000000000a0000
>Jun  4 13:50:08 hemulen kernel: Nosave address range: 00000000000a0000 - 00000000000f0000
>Jun  4 13:50:09 hemulen kernel: Nosave address range: 00000000000f0000 - 0000000000100000
>Jun  4 13:50:09 hemulen kernel: Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>Jun  4 13:50:09 hemulen kernel: SMP: Allowing 2 CPUs, 0 hotplug CPUs
>Jun  4 13:50:09 hemulen kernel: PERCPU: Allocating 43264 bytes of per cpu data
>Jun  4 13:50:09 hemulen kernel: Built 1 zonelists.  Total pages: 514344
>Jun  4 13:50:09 hemulen kernel: Kernel command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:50:09 hemulen kernel: Initializing CPU#0
>Jun  4 13:50:09 hemulen kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Jun  4 13:50:09 hemulen kernel: Console: colour VGA+ 80x25
>Jun  4 13:50:09 hemulen kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Jun  4 13:50:09 hemulen kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Jun  4 13:50:09 hemulen kernel: Checking aperture...
>Jun  4 13:50:09 hemulen kernel: CPU 0: aperture @ b1c000000 size 32 MB
>Jun  4 13:50:09 hemulen kernel: Aperture too small (32 MB)
>Jun  4 13:50:09 hemulen kernel: No AGP bridge found
>Jun  4 13:50:09 hemulen kernel: Memory: 2051584k/2095808k available (2454k kernel code, 43832k reserved, 1458k data, 312k init)
>Jun  4 13:50:09 hemulen kernel: Calibrating delay using timer specific routine.. 4424.44 BogoMIPS (lpj=2212221)
>Jun  4 13:50:09 hemulen kernel: Security Framework v1.0.0 initialized
>Jun  4 13:50:09 hemulen kernel: SELinux:  Initializing.
>Jun  4 13:50:09 hemulen kernel: SELinux:  Starting in permissive mode
>Jun  4 13:50:09 hemulen kernel: selinux_register_security:  Registering secondary module capability
>Jun  4 13:50:09 hemulen kernel: Capability LSM initialized as secondary
>Jun  4 13:50:09 hemulen kernel: Mount-cache hash table entries: 256
>Jun  4 13:50:09 hemulen kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  4 13:50:09 hemulen kernel: CPU: L2 Cache: 512K (64 bytes/line)
>Jun  4 13:50:09 hemulen kernel: CPU 0/0 -> Node 0
>Jun  4 13:50:09 hemulen kernel: CPU: Physical Processor ID: 0
>Jun  4 13:50:09 hemulen kernel: CPU: Processor Core ID: 0
>Jun  4 13:50:09 hemulen kernel: SMP alternatives: switching to UP code
>Jun  4 13:50:09 hemulen kernel: ACPI: Core revision 20060707
>Jun  4 13:50:09 hemulen kernel: ACPI: setting ELCR to 0200 (from 0ca0)
>Jun  4 13:50:09 hemulen kernel: Using local APIC timer interrupts.
>Jun  4 13:50:09 hemulen kernel: result 12557141
>Jun  4 13:50:10 hemulen kernel: Detected 12.557 MHz APIC timer.
>Jun  4 13:50:10 hemulen kernel: SMP alternatives: switching to SMP code
>Jun  4 13:50:10 hemulen kernel: Booting processor 1/2 APIC 0x1
>Jun  4 13:50:10 hemulen openvpn[2709]: OpenVPN 2.1_rc2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] built on Mar  3 2007
>Jun  4 13:50:10 hemulen kernel: Initializing CPU#1
>Jun  4 13:50:10 hemulen openvpn[2709]: MANAGEMENT: TCP Socket listening on 127.0.0.1:7505
>Jun  4 13:50:10 hemulen kernel: Calibrating delay using timer specific routine.. 4420.18 BogoMIPS (lpj=2210094)
>Jun  4 13:50:10 hemulen kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  4 13:50:10 hemulen openvpn[2709]: Diffie-Hellman initialized with 1024 bit key
>Jun  4 13:50:10 hemulen kernel: CPU: L2 Cache: 512K (64 bytes/line)
>Jun  4 13:50:10 hemulen kernel: CPU 1/1 -> Node 0
>Jun  4 13:50:10 hemulen openvpn[2709]: TLS-Auth MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:50:10 hemulen kernel: CPU: Physical Processor ID: 0
>Jun  4 13:50:10 hemulen openvpn[2709]: TUN/TAP device tun0 opened
>Jun  4 13:50:10 hemulen kernel: CPU: Processor Core ID: 1
>Jun  4 13:50:10 hemulen openvpn[2709]: TUN/TAP TX queue length set to 100
>Jun  4 13:50:10 hemulen kernel: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Jun  4 13:50:10 hemulen openvpn[2709]: /sbin/ip link set dev tun0 up mtu 1500
>Jun  4 13:50:10 hemulen kernel: CPU 1: Syncing TSC to CPU 0.
>Jun  4 13:50:10 hemulen openvpn[2709]: /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
>Jun  4 13:50:10 hemulen kernel: CPU 1: synchronized TSC with CPU 0 (last diff 0 cycles, maxerr 566 cycles)
>Jun  4 13:50:10 hemulen openvpn[2709]: /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
>Jun  4 13:50:10 hemulen kernel: Brought up 2 CPUs
>Jun  4 13:50:10 hemulen openvpn[2709]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:50:10 hemulen kernel: time.c: Using 25.000000 MHz WALL HPET GTOD HPET timer.
>Jun  4 13:50:10 hemulen openvpn[2725]: Listening for incoming TCP connection on [undef]:1194
>Jun  4 13:50:10 hemulen kernel: time.c: Detected 2210.057 MHz processor.
>Jun  4 13:50:10 hemulen openvpn[2725]: Socket Buffers: R=[87380->131072] S=[16384->131072]
>Jun  4 13:50:10 hemulen openvpn[2725]: TCPv4_SERVER link local (bound): [undef]:1194
>Jun  4 13:50:10 hemulen openvpn[2725]: TCPv4_SERVER link remote: [undef]
>Jun  4 13:50:10 hemulen hcid[2736]: Bluetooth HCI daemon
>Jun  4 13:50:10 hemulen openvpn[2725]: MULTI: multi_init called, r=256 v=256
>Jun  4 13:50:10 hemulen sdpd[2740]: Bluetooth SDP daemon 
>Jun  4 13:50:10 hemulen hcid[2736]: Register path:/org/bluez fallback:1
>Jun  4 13:50:10 hemulen openvpn[2725]: IFCONFIG POOL: base=10.8.0.4 size=62
>Jun  4 13:50:10 hemulen hcid[2736]: HCI dev 0 registered
>Jun  4 13:50:10 hemulen openvpn[2725]: IFCONFIG POOL LIST
>Jun  4 13:50:11 hemulen hcid[2736]: Register path:/org/bluez/hci0 fallback:0
>Jun  4 13:50:11 hemulen openvpn[2725]: lilla-my,10.8.0.4
>Jun  4 13:50:11 hemulen hcid[2736]: HCI dev 0 up
>Jun  4 13:50:11 hemulen openvpn[2725]: knyttet,10.8.0.8
>Jun  4 13:50:11 hemulen hcid[2736]: Device hci0 has been added
>Jun  4 13:50:11 hemulen openvpn[2725]: lilla-my,10.8.0.12
>Jun  4 13:50:11 hemulen kernel: migration_cost=225
>Jun  4 13:50:11 hemulen hcid[2736]: Starting security manager 0
>Jun  4 13:50:11 hemulen openvpn[2725]: MULTI: TCP INIT maxclients=1024 maxevents=1028
>Jun  4 13:50:11 hemulen kernel: NET: Registered protocol family 16
>Jun  4 13:50:11 hemulen hcid[2736]: Device hci0 has been activated
>Jun  4 13:50:11 hemulen openvpn[2725]: Initialization Sequence Completed
>Jun  4 13:50:11 hemulen kernel: ACPI: bus type pci registered
>Jun  4 13:50:11 hemulen hidd[2792]: Bluetooth HID daemon
>Jun  4 13:50:11 hemulen kernel: PCI: Using configuration type 1
>Jun  4 13:50:11 hemulen kernel: ACPI: Interpreter enabled
>Jun  4 13:50:11 hemulen kernel: ACPI: Using PIC for interrupt routing
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Jun  4 13:50:11 hemulen kernel: PCI: Transparent bridge - 0000:00:0e.0
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen automount[2815]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:11 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen hpiod: 1.7.2 accepting connections at 2208... 
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:50:12 hemulen kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Jun  4 13:50:12 hemulen kernel: pnp: PnP ACPI init
>Jun  4 13:50:12 hemulen kernel: pnp: PnP ACPI: found 14 devices
>Jun  4 13:50:12 hemulen kernel: usbcore: registered new interface driver usbfs
>Jun  4 13:50:12 hemulen kernel: usbcore: registered new interface driver hub
>Jun  4 13:50:13 hemulen kernel: usbcore: registered new device driver usb
>Jun  4 13:50:13 hemulen kernel: PCI: Using ACPI for IRQ routing
>Jun  4 13:50:13 hemulen kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Jun  4 13:50:13 hemulen kernel: NetLabel: Initializing
>Jun  4 13:50:13 hemulen kernel: NetLabel:  domain hash size = 128
>Jun  4 13:50:13 hemulen kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Jun  4 13:50:13 hemulen kernel: NetLabel:  unlabeled traffic allowed by default
>Jun  4 13:50:13 hemulen kernel: hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>Jun  4 13:50:13 hemulen kernel: hpet0: 3 32-bit timers, 25000000 Hz
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>Jun  4 13:50:13 hemulen kernel: pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>Jun  4 13:50:13 hemulen kernel: PCI: Bridge: 0000:00:04.0
>Jun  4 13:50:13 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:13 hemulen kernel:   MEM window: disabled.
>Jun  4 13:50:13 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:13 hemulen kernel: PCI: Bridge: 0000:00:0e.0
>Jun  4 13:50:13 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:13 hemulen kernel:   MEM window: fdf00000-fdffffff
>Jun  4 13:50:13 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:13 hemulen kernel: PCI: Bridge: 0000:03:00.0
>Jun  4 13:50:13 hemulen kernel:   IO window: a000-afff
>Jun  4 13:50:13 hemulen kernel:   MEM window: fdc00000-fddfffff
>Jun  4 13:50:13 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:50:13 hemulen kernel: PCI: Bridge: 0000:03:00.1
>Jun  4 13:50:13 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:14 hemulen kernel:   MEM window: disabled.
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:14 hemulen kernel: PCI: Bridge: 0000:00:12.0
>Jun  4 13:50:14 hemulen kernel:   IO window: a000-afff
>Jun  4 13:50:14 hemulen kernel:   MEM window: fdc00000-fdefffff
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:50:14 hemulen kernel: PCI: Bridge: 0000:00:14.0
>Jun  4 13:50:14 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:14 hemulen kernel:   MEM window: disabled.
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:14 hemulen kernel: PCI: Bridge: 0000:00:15.0
>Jun  4 13:50:14 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:14 hemulen kernel:   MEM window: disabled.
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:14 hemulen kernel: PCI: Bridge: 0000:00:16.0
>Jun  4 13:50:14 hemulen kernel:   IO window: 9000-9fff
>Jun  4 13:50:14 hemulen kernel:   MEM window: fdb00000-fdbfffff
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:50:14 hemulen kernel: PCI: Bridge: 0000:00:17.0
>Jun  4 13:50:14 hemulen kernel:   IO window: disabled.
>Jun  4 13:50:14 hemulen kernel:   MEM window: f4000000-fbffffff
>Jun  4 13:50:14 hemulen kernel:   PREFETCH window: e8000000-efffffff
>Jun  4 13:50:14 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
>Jun  4 13:50:14 hemulen kernel: ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:14 hemulen kernel: NET: Registered protocol family 2
>Jun  4 13:50:14 hemulen kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>Jun  4 13:50:14 hemulen kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>Jun  4 13:50:14 hemulen kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>Jun  4 13:50:14 hemulen kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Jun  4 13:50:14 hemulen kernel: TCP reno registered
>Jun  4 13:50:14 hemulen kernel: checking if image is initramfs... it is
>Jun  4 13:50:14 hemulen kernel: Freeing initrd memory: 2397k freed
>Jun  4 13:50:14 hemulen kernel: audit: initializing netlink socket (disabled)
>Jun  4 13:50:14 hemulen kernel: audit(1180957771.266:1): initialized
>Jun  4 13:50:14 hemulen kernel: Total HugeTLB memory allocated, 0
>Jun  4 13:50:14 hemulen kernel: VFS: Disk quotas dquot_6.5.1
>Jun  4 13:50:14 hemulen kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Jun  4 13:50:14 hemulen kernel: SELinux:  Registering netfilter hooks
>Jun  4 13:50:14 hemulen kernel: ksign: Installing public key data
>Jun  4 13:50:14 hemulen kernel: Loading keyring
>Jun  4 13:50:14 hemulen kernel: - Added public key A2C7955D82CFA151
>Jun  4 13:50:14 hemulen kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Jun  4 13:50:15 hemulen kernel: io scheduler noop registered
>Jun  4 13:50:15 hemulen kernel: io scheduler anticipatory registered
>Jun  4 13:50:15 hemulen kernel: io scheduler deadline registered
>Jun  4 13:50:15 hemulen kernel: io scheduler cfq registered (default)
>Jun  4 13:50:15 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:50:15 hemulen last message repeated 5 times
>Jun  4 13:50:15 hemulen kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Jun  4 13:50:15 hemulen kernel: ACPI: Fan [FAN] (on)
>Jun  4 13:50:15 hemulen kernel: ACPI: Thermal Zone [THRM] (40 C)
>Jun  4 13:50:15 hemulen kernel: Real Time Clock Driver v1.12ac
>Jun  4 13:50:15 hemulen kernel: Non-volatile memory driver v1.2
>Jun  4 13:50:15 hemulen kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Jun  4 13:50:15 hemulen kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Jun  4 13:50:15 hemulen kernel: serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  4 13:50:15 hemulen kernel: 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>Jun  4 13:50:15 hemulen kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Jun  4 13:50:15 hemulen kernel: input: Macintosh mouse button emulation as /class/input/input0
>Jun  4 13:50:15 hemulen kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Jun  4 13:50:15 hemulen kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Jun  4 13:50:15 hemulen kernel: NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
>Jun  4 13:50:15 hemulen kernel: NFORCE-MCP55: chipset revision 161
>Jun  4 13:50:15 hemulen kernel: NFORCE-MCP55: not 100% native mode: will probe irqs later
>Jun  4 13:50:15 hemulen kernel: NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
>Jun  4 13:50:15 hemulen kernel: NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
>Jun  4 13:50:15 hemulen kernel:     ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
>Jun  4 13:50:15 hemulen kernel: hdb: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
>Jun  4 13:50:15 hemulen kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Jun  4 13:50:15 hemulen kernel: ide-floppy driver 0.99.newide
>Jun  4 13:50:15 hemulen kernel: usbcore: registered new interface driver libusual
>Jun  4 13:50:15 hemulen kernel: usbcore: registered new interface driver hiddev
>Jun  4 13:50:15 hemulen kernel: usbcore: registered new interface driver usbhid
>Jun  4 13:50:15 hemulen kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Jun  4 13:50:15 hemulen kernel: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>Jun  4 13:50:15 hemulen kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
>Jun  4 13:50:15 hemulen kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Jun  4 13:50:15 hemulen kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Jun  4 13:50:15 hemulen kernel: mice: PS/2 mouse device common for all mice
>Jun  4 13:50:15 hemulen kernel: TCP bic registered
>Jun  4 13:50:15 hemulen kernel: Initializing XFRM netlink socket
>Jun  4 13:50:15 hemulen kernel: NET: Registered protocol family 1
>Jun  4 13:50:15 hemulen kernel: NET: Registered protocol family 17
>Jun  4 13:50:16 hemulen kernel: powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>Jun  4 13:50:16 hemulen kernel: powernow-k8: MP systems not supported by PSB BIOS structure
>Jun  4 13:50:16 hemulen kernel: powernow-k8: MP systems not supported by PSB BIOS structure
>Jun  4 13:50:16 hemulen kernel: ACPI: (supports S0 S1 S3 S4 S5)
>Jun  4 13:50:16 hemulen kernel: Freeing unused kernel memory: 312k freed
>Jun  4 13:50:16 hemulen kernel: Write protecting the kernel read-only data: 1042k
>Jun  4 13:50:16 hemulen kernel: firmware_class: attempt to set timeout to 10
>Jun  4 13:50:16 hemulen kernel: USB Universal Host Controller Interface driver v3.0
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
>Jun  4 13:50:16 hemulen kernel: ohci_hcd 0000:00:0a.0: OHCI Host Controller
>Jun  4 13:50:16 hemulen kernel: ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>Jun  4 13:50:16 hemulen kernel: ohci_hcd 0000:00:0a.0: irq 7, io mem 0xfe02f000
>Jun  4 13:50:16 hemulen kernel: input: PS2++ Logitech Wheel Mouse as /class/input/input1
>Jun  4 13:50:16 hemulen kernel: usb usb1: configuration #1 chosen from 1 choice
>Jun  4 13:50:16 hemulen kernel: hub 1-0:1.0: USB hub found
>Jun  4 13:50:16 hemulen kernel: hub 1-0:1.0: 10 ports detected
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:16 hemulen kernel: ehci_hcd 0000:00:0a.1: EHCI Host Controller
>Jun  4 13:50:16 hemulen kernel: ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>Jun  4 13:50:16 hemulen kernel: ehci_hcd 0000:00:0a.1: debug port 1
>Jun  4 13:50:16 hemulen kernel: ehci_hcd 0000:00:0a.1: irq 5, io mem 0xfe02e000
>Jun  4 13:50:16 hemulen kernel: ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Jun  4 13:50:16 hemulen kernel: usb usb2: configuration #1 chosen from 1 choice
>Jun  4 13:50:16 hemulen kernel: hub 2-0:1.0: USB hub found
>Jun  4 13:50:16 hemulen kernel: hub 2-0:1.0: 10 ports detected
>Jun  4 13:50:16 hemulen kernel: SCSI subsystem initialized
>Jun  4 13:50:16 hemulen kernel: Fusion MPT base driver 3.04.03
>Jun  4 13:50:16 hemulen kernel: Copyright (c) 1999-2007 LSI Logic Corporation
>Jun  4 13:50:16 hemulen kernel: Fusion MPT SPI Host driver 3.04.03
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [LNK8] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:50:16 hemulen kernel: mptbase: Initiating ioc0 bringup
>Jun  4 13:50:16 hemulen kernel: ioc0: 53C1030: Capabilities={Initiator}
>Jun  4 13:50:16 hemulen kernel: scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=11
>Jun  4 13:50:16 hemulen kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2
>Jun  4 13:50:16 hemulen kernel: usb 1-3: configuration #1 chosen from 1 choice
>Jun  4 13:50:16 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input2
>Jun  4 13:50:16 hemulen kernel: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:50:16 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input3
>Jun  4 13:50:16 hemulen kernel: input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:50:16 hemulen kernel: usb 1-4: new full speed USB device using ohci_hcd and address 3
>Jun  4 13:50:16 hemulen kernel: usb 1-4: configuration #1 chosen from 1 choice
>Jun  4 13:50:16 hemulen kernel: usb 1-10: new full speed USB device using ohci_hcd and address 4
>Jun  4 13:50:16 hemulen kernel: scsi 0:0:0:0: Direct-Access     LSILOGIC RAID ARRAY    IS 1000 PQ: 0 ANSI: 2
>Jun  4 13:50:16 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:50:16 hemulen kernel: sda: Write Protect is off
>Jun  4 13:50:16 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:16 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:50:16 hemulen kernel: sda: Write Protect is off
>Jun  4 13:50:16 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:16 hemulen kernel:  sda: sda1 sda2
>Jun  4 13:50:16 hemulen kernel: sd 0:0:0:0: Attached scsi disk sda
>Jun  4 13:50:16 hemulen kernel: usb 1-10: configuration #1 chosen from 2 choices
>Jun  4 13:50:16 hemulen kernel: scsi 0:1:0:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:50:16 hemulen kernel:  target0:1:0: Beginning Domain Validation
>Jun  4 13:50:16 hemulen kernel:  target0:1:0: Ending Domain Validation
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:50:16 hemulen kernel:  target0:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:50:16 hemulen kernel: scsi 0:1:2:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:50:16 hemulen kernel:  target0:1:2: Beginning Domain Validation
>Jun  4 13:50:16 hemulen kernel:  target0:1:2: Ending Domain Validation
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:50:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:50:16 hemulen kernel:  target0:1:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.1[B] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:50:16 hemulen kernel: mptbase: Initiating ioc1 bringup
>Jun  4 13:50:16 hemulen kernel: ioc1: 53C1030: Capabilities={Initiator}
>Jun  4 13:50:16 hemulen kernel: scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=10
>Jun  4 13:50:16 hemulen kernel: shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
>Jun  4 13:50:16 hemulen kernel: shpchp: Can't get msi for the hotplug controller
>Jun  4 13:50:16 hemulen kernel: shpchp: Use INTx for the hotplug controller
>Jun  4 13:50:16 hemulen kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LSID] enabled at IRQ 5
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LSID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:16 hemulen kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 5
>Jun  4 13:50:16 hemulen kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 5
>Jun  4 13:50:16 hemulen kernel: scsi2 : sata_nv
>Jun  4 13:50:16 hemulen kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Jun  4 13:50:16 hemulen kernel: ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>Jun  4 13:50:16 hemulen kernel: ata1.00: ata1: dev 0 multi count 1
>Jun  4 13:50:16 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:16 hemulen kernel: scsi3 : sata_nv
>Jun  4 13:50:16 hemulen kernel: ata2: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:50:16 hemulen kernel: ATA: abnormal status 0x7F on port 0x977
>Jun  4 13:50:16 hemulen kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>Jun  4 13:50:16 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:50:16 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:50:16 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:16 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:50:16 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:50:16 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:16 hemulen kernel:  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>Jun  4 13:50:16 hemulen kernel: sd 2:0:0:0: Attached scsi disk sdb
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
>Jun  4 13:50:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LFID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:17 hemulen kernel: ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 5
>Jun  4 13:50:17 hemulen kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 5
>Jun  4 13:50:17 hemulen kernel: scsi4 : sata_nv
>Jun  4 13:50:17 hemulen kernel: ata3: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:50:17 hemulen kernel: ATA: abnormal status 0x7F on port 0x9E7
>Jun  4 13:50:17 hemulen kernel: scsi5 : sata_nv
>Jun  4 13:50:17 hemulen kernel: ata4: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:50:17 hemulen kernel: ATA: abnormal status 0x7F on port 0x967
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 5
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LSA2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:17 hemulen kernel: ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 5
>Jun  4 13:50:17 hemulen kernel: ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 5
>Jun  4 13:50:17 hemulen kernel: scsi6 : sata_nv
>Jun  4 13:50:17 hemulen kernel: ata5: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:50:17 hemulen kernel: ATA: abnormal status 0x7F on port 0xC807
>Jun  4 13:50:17 hemulen kernel: scsi7 : sata_nv
>Jun  4 13:50:17 hemulen kernel: ata6: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:50:17 hemulen kernel: ATA: abnormal status 0x7F on port 0xC007
>Jun  4 13:50:17 hemulen kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Jun  4 13:50:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:50:17 hemulen kernel: SELinux:  Disabled at runtime.
>Jun  4 13:50:17 hemulen kernel: SELinux:  Unregistering netfilter hooks
>Jun  4 13:50:17 hemulen kernel: audit(1180957787.362:2): selinux=0 auid=4294967295
>Jun  4 13:50:17 hemulen kernel: cdc_acm 1-10:1.0: ttyACM0: USB ACM device
>Jun  4 13:50:17 hemulen kernel: usbcore: registered new interface driver cdc_acm
>Jun  4 13:50:17 hemulen kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
>Jun  4 13:50:17 hemulen kernel: parport: PnPBIOS parport detected.
>Jun  4 13:50:17 hemulen kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Jun  4 13:50:17 hemulen kernel: IRQ handler type mismatch for IRQ 7
>Jun  4 13:50:17 hemulen kernel: current handler: ohci_hcd:usb1
>Jun  4 13:50:17 hemulen kernel: 
>Jun  4 13:50:17 hemulen kernel: Call Trace:
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff802b1519>] setup_irq+0x1bf/0x1e5
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8812b15e>] :parport_pc:parport_pc_interrupt+0x0/0x4b
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff802b15d0>] request_irq+0x91/0xb4
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8812af42>] :parport_pc:parport_pc_probe_port+0x6e1/0x835
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8812b140>] :parport_pc:parport_pc_pnp_probe+0xaa/0xc8
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff80386046>] pnp_device_probe+0x7b/0x9e
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803a9ec8>] really_probe+0x87/0x106
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803aa119>] __driver_attach+0x90/0xcd
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803aa089>] __driver_attach+0x0/0xcd
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803aa089>] __driver_attach+0x0/0xcd
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803a93a2>] bus_for_each_dev+0x43/0x6e
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff803a96ea>] bus_add_driver+0x6b/0x18d
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff88135393>] :parport_pc:parport_pc_init+0x2b2/0x356
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8025fb74>] __mutex_unlock_slowpath+0x32/0x3d
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8029f98a>] sys_init_module+0x1797/0x1904
>Jun  4 13:50:17 hemulen kernel:  [<ffffffff8025a11e>] system_call+0x7e/0x83
>Jun  4 13:50:17 hemulen kernel: 
>Jun  4 13:50:17 hemulen kernel: parport0: irq 7 in use, resorting to polled operation
>Jun  4 13:50:17 hemulen kernel: Bluetooth: Core ver 2.11
>Jun  4 13:50:17 hemulen kernel: NET: Registered protocol family 31
>Jun  4 13:50:17 hemulen kernel: Bluetooth: HCI device and connection manager initialized
>Jun  4 13:50:17 hemulen kernel: Bluetooth: HCI socket layer initialized
>Jun  4 13:50:17 hemulen kernel: Bluetooth: HCI USB driver ver 2.9
>Jun  4 13:50:17 hemulen kernel: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hdb: hw_config=4101
>Jun  4 13:50:17 hemulen kernel: , UDMA(66)
>Jun  4 13:50:17 hemulen kernel: Uniform CD-ROM driver Revision: 3.20
>Jun  4 13:50:17 hemulen kernel: usbcore: registered new interface driver hci_usb
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:50:17 hemulen kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Jun  4 13:50:17 hemulen kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:50:17 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:50:17 hemulen kernel: EDAC MC: Ver: 2.0.1 May 16 2007
>Jun  4 13:50:17 hemulen kernel: input: PC Speaker as /class/input/input4
>Jun  4 13:50:17 hemulen kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Jun  4 13:50:17 hemulen kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0
>Jun  4 13:50:17 hemulen kernel: scsi 0:1:2:0: Attached scsi generic sg2 type 0
>Jun  4 13:50:17 hemulen kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0
>Jun  4 13:50:17 hemulen kernel: eth0: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:10.0
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 5
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LMC1] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:50:17 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:50:17 hemulen kernel: Floppy drive(s): fd0 is 1.44M
>Jun  4 13:50:17 hemulen kernel: FDC 0 is a post-1991 82077
>Jun  4 13:50:17 hemulen kernel: eth1: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:11.0
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
>Jun  4 13:50:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:50:17 hemulen kernel: hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>Jun  4 13:50:17 hemulen kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>Jun  4 13:50:17 hemulen kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>Jun  4 13:50:17 hemulen kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Jun  4 13:50:17 hemulen kernel: lp0: using parport0 (polling).
>Jun  4 13:50:17 hemulen kernel: lp0: console ready
>Jun  4 13:50:17 hemulen kernel: NET: Registered protocol family 10
>Jun  4 13:50:17 hemulen kernel: lo: Disabled Privacy Extensions
>Jun  4 13:50:17 hemulen kernel: Mobile IPv6
>Jun  4 13:50:17 hemulen kernel: input: Power Button (FF) as /class/input/input5
>Jun  4 13:50:17 hemulen kernel: ACPI: Power Button (FF) [PWRF]
>Jun  4 13:50:17 hemulen kernel: input: Power Button (CM) as /class/input/input6
>Jun  4 13:50:17 hemulen kernel: ACPI: Power Button (CM) [PWRB]
>Jun  4 13:50:17 hemulen kernel: No dock devices found.
>Jun  4 13:50:17 hemulen kernel: ibm_acpi: ec object not found
>Jun  4 13:50:17 hemulen kernel: md: Autodetecting RAID arrays.
>Jun  4 13:50:17 hemulen kernel: md: autorun ...
>Jun  4 13:50:17 hemulen kernel: md: ... autorun DONE.
>Jun  4 13:50:17 hemulen kernel: device-mapper: multipath: version 1.0.5 loaded
>Jun  4 13:50:17 hemulen kernel: EXT3 FS on dm-0, internal journal
>Jun  4 13:50:18 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:18 hemulen kernel: EXT3 FS on sda1, internal journal
>Jun  4 13:50:18 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:50:18 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:18 hemulen kernel: EXT3 FS on dm-1, internal journal
>Jun  4 13:50:18 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:50:18 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:18 hemulen kernel: EXT3 FS on dm-3, internal journal
>Jun  4 13:50:18 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:50:18 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:18 hemulen kernel: EXT3 FS on dm-2, internal journal
>Jun  4 13:50:18 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:50:18 hemulen kernel: Adding 1614524k swap on /dev/sdb3.  Priority:-1 extents:1 across:1614524k
>Jun  4 13:50:18 hemulen kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-2 extents:1 across:2031608k
>Jun  4 13:50:18 hemulen kernel: tun: Universal TUN/TAP device driver, 1.6
>Jun  4 13:50:18 hemulen kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Jun  4 13:50:18 hemulen kernel: Bluetooth: L2CAP ver 2.8
>Jun  4 13:50:18 hemulen kernel: Bluetooth: L2CAP socket layer initialized
>Jun  4 13:50:18 hemulen kernel: Bluetooth: RFCOMM socket layer initialized
>Jun  4 13:50:18 hemulen kernel: Bluetooth: RFCOMM TTY layer initialized
>Jun  4 13:50:18 hemulen kernel: Bluetooth: RFCOMM ver 1.8
>Jun  4 13:50:18 hemulen kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Jun  4 13:50:18 hemulen xinetd[2889]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Jun  4 13:50:18 hemulen xinetd[2889]: Started working: 2 available services
>Jun  4 13:50:21 hemulen openvpn[2725]: MULTI: multi_create_instance called
>Jun  4 13:50:21 hemulen openvpn[2725]: Re-using SSL/TLS context
>Jun  4 13:50:21 hemulen openvpn[2725]: LZO compression initialized
>Jun  4 13:50:21 hemulen openvpn[2725]: Control Channel MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:50:21 hemulen openvpn[2725]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:50:21 hemulen openvpn[2725]: Local Options hash (VER=V4): 'c0103fa8'
>Jun  4 13:50:21 hemulen openvpn[2725]: Expected Remote Options hash (VER=V4): '69109d17'
>Jun  4 13:50:21 hemulen openvpn[2725]: TCP connection established with 83.183.6.13:41821
>Jun  4 13:50:21 hemulen openvpn[2725]: Socket Buffers: R=[131072->131072] S=[131072->131072]
>Jun  4 13:50:21 hemulen openvpn[2725]: TCPv4_SERVER link local: [undef]
>Jun  4 13:50:21 hemulen openvpn[2725]: TCPv4_SERVER link remote: 83.183.6.13:41821
>Jun  4 13:50:22 hemulen openvpn[2725]: 83.183.6.13:41821 TLS: Initial packet from 83.183.6.13:41821, sid=bc9fe94f ecc76baf
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 VERIFY OK: depth=1, /C=SE/ST=BD/L=Lulea/O=KLN/CN=KLN/emailAddress=kln@kolmodin.net
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 VERIFY OK: depth=0, /C=SE/ST=CA/L=Lulea/O=KLN/CN=lilla-my/emailAddress=mk@kolmodin.net
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
>Jun  4 13:50:24 hemulen openvpn[2725]: 83.183.6.13:41821 [lilla-my] Peer Connection Initiated with 83.183.6.13:41821
>Jun  4 13:50:24 hemulen openvpn[2725]: lilla-my/83.183.6.13:41821 MULTI: Learn: 10.8.0.6 -> lilla-my/83.183.6.13:41821
>Jun  4 13:50:24 hemulen openvpn[2725]: lilla-my/83.183.6.13:41821 MULTI: primary virtual IP for lilla-my/83.183.6.13:41821: 10.8.0.6
>Jun  4 13:50:26 hemulen openvpn[2725]: lilla-my/83.183.6.13:41821 PUSH: Received control message: 'PUSH_REQUEST'
>Jun  4 13:50:26 hemulen openvpn[2725]: lilla-my/83.183.6.13:41821 SENT CONTROL [lilla-my]: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' (status=1)
>Jun  4 13:50:28 hemulen ntpdate[2904]: step time server 76.169.237.141 offset -0.448134 sec
>Jun  4 13:50:28 hemulen ntpd[2906]: ntpd 4.2.4p0@1.1472 Wed Mar  7 18:53:03 UTC 2007 (1)
>Jun  4 13:50:28 hemulen ntpd[2907]: precision = 2.000 usec
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #1 wildcard, ::#123 Disabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #2 eth0, fe80::217:31ff:fec4:640c#123 Enabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #3 lo, ::1#123 Enabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #5 eth0, 192.168.0.100#123 Enabled
>Jun  4 13:50:28 hemulen ntpd[2907]: Listening on interface #6 tun0, 10.8.0.1#123 Enabled
>Jun  4 13:50:28 hemulen ntpd[2907]: kernel time sync status 0040
>Jun  4 13:50:29 hemulen ntpd[2907]: frequency initialized 133.555 PPM from /var/lib/ntp/drift
>Jun  4 13:50:30 hemulen gpm[2972]: *** info [startup.c(95)]: 
>Jun  4 13:50:30 hemulen gpm[2972]: Started gpm successfully. Entered daemon mode.
>Jun  4 13:50:31 hemulen saslauthd[3052]: detach_tty      : master pid is: 3052
>Jun  4 13:50:31 hemulen saslauthd[3052]: ipc_init        : listening on socket: /var/run/saslauthd/mux
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
>Jun  4 13:50:43 hemulen kernel: ata1.00: cmd b0/da:00:00:4f:c2/00:00:00:00:00/00 tag 0 cdb 0x0 data 0 
>Jun  4 13:50:43 hemulen kernel:          res 51/04:00:00:4f:c2/00:00:00:00:00/00 Emask 0x1 (device error)
>Jun  4 13:50:43 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:50:43 hemulen kernel: ata1: EH complete
>Jun  4 13:50:43 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:50:43 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:50:43 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:43 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:50:43 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:50:43 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:50:43 hemulen smartd[3205]: smartd version 5.37 [x86_64-redhat-linux-gnu] Copyright (C) 2002-6 Bruce Allen 
>Jun  4 13:50:43 hemulen smartd[3205]: Home page is http://smartmontools.sourceforge.net/  
>Jun  4 13:50:43 hemulen smartd[3205]: Opened configuration file /etc/smartd.conf 
>Jun  4 13:50:43 hemulen smartd[3205]: Configuration file /etc/smartd.conf parsed. 
>Jun  4 13:50:43 hemulen smartd[3205]: Device: /dev/sda, opened 
>Jun  4 13:50:43 hemulen smartd[3205]: Device: /dev/sda, IE (SMART) not enabled, skip device Try 'smartctl -s on /dev/sda' to turn on SMART features 
>Jun  4 13:50:43 hemulen smartd[3205]: Unable to register SCSI device /dev/sda at line 32 of file /etc/smartd.conf 
>Jun  4 13:50:43 hemulen smartd[3205]: Device /dev/sda not available 
>Jun  4 13:50:44 hemulen smartd[3205]: Device: /dev/sdb, opened 
>Jun  4 13:50:44 hemulen smartd[3205]: Device: /dev/sdb, found in smartd database. 
>Jun  4 13:50:44 hemulen smartd[3205]: Device: /dev/sdb, is SMART capable. Adding to "monitor" list. 
>Jun  4 13:50:44 hemulen smartd[3205]: Monitoring 1 ATA and 0 SCSI devices 
>Jun  4 13:50:44 hemulen smartd[3207]: smartd has fork()ed into background mode. New PID=3207. 
>Jun  4 13:50:44 hemulen init: open(/dev/pts/0): No such file or directory
>Jun  4 13:50:44 hemulen last message repeated 6 times
>Jun  4 13:50:44 hemulen gdm[3263]: (null): cannot open shared object file: No such file or directory
>Jun  4 13:50:53 hemulen gconfd (mk-3410): starting (version 2.14.0), pid 3410 user 'mk'
>Jun  4 13:50:53 hemulen gconfd (mk-3410): Resolved address "xml:readonly:/etc/gconf/gconf.xml.mandatory" to a read-only configuration source at position 0
>Jun  4 13:50:53 hemulen gconfd (mk-3410): Resolved address "xml:readwrite:/home/mk/.gconf" to a writable configuration source at position 1
>Jun  4 13:50:53 hemulen gconfd (mk-3410): Resolved address "xml:readonly:/etc/gconf/gconf.xml.defaults" to a read-only configuration source at position 2
>Jun  4 13:50:56 hemulen gconfd (mk-3410): Resolved address "xml:readwrite:/home/mk/.gconf" to a writable configuration source at position 0
>Jun  4 13:50:56 hemulen hcid[2736]: Default passkey agent (:1.7, /org/bluez/applet) registered
>Jun  4 13:50:57 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:50:57 hemulen kernel: EXT3 FS on dm-8, internal journal
>Jun  4 13:50:57 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:53:45 hemulen ntpd[2907]: synchronized to LOCAL(0), stratum 10
>Jun  4 13:53:45 hemulen ntpd[2907]: kernel time sync enabled 0001
>Jun  4 13:54:51 hemulen ntpd[2907]: synchronized to 193.125.143.140, stratum 2
>Jun  4 13:56:26 hemulen shutdown[3703]: shutting down for system reboot
>Jun  4 13:56:26 hemulen gconfd (mk-3410): Received signal 15, shutting down cleanly
>Jun  4 13:56:26 hemulen gconfd (mk-3410): Exiting
>Jun  4 13:56:26 hemulen escd: *** glibc detected *** ./escd: double free or corruption (out): 0x00007fffea5b98f0 *** 
>Jun  4 13:56:27 hemulen smartd[3207]: smartd received signal 15: Terminated 
>Jun  4 13:56:27 hemulen smartd[3207]: smartd is exiting (exit status 0) 
>Jun  4 13:56:28 hemulen libvirt-qemud: Shutting down on signal 15
>Jun  4 13:56:28 hemulen saslauthd[3052]: server_exit     : master exited: 3052
>Jun  4 13:56:29 hemulen ddclient[2932]: WARNING:  caught SIGTERM; exiting
>Jun  4 13:56:29 hemulen xinetd[2889]: Exiting...
>Jun  4 13:56:33 hemulen ntpd[2907]: ntpd exiting on signal 15
>Jun  4 13:56:33 hemulen openvpn[2725]: TCP/UDP: Closing socket
>Jun  4 13:56:33 hemulen openvpn[2725]: TCP/UDP: Closing socket
>Jun  4 13:56:33 hemulen openvpn[2725]: /sbin/ip route del 10.8.0.0/24
>Jun  4 13:56:33 hemulen openvpn[2725]: Closing TUN/TAP interface
>Jun  4 13:56:33 hemulen openvpn[2725]: SIGTERM[hard,] received, process exiting
>Jun  4 13:56:33 hemulen hcid[2736]: Got disconnected from the system message bus
>Jun  4 13:56:33 hemulen rpc.statd[2669]: Caught signal 15, un-registering and exiting.
>Jun  4 13:56:33 hemulen portmap[4200]: connect from 127.0.0.1 to unset(status): request from unprivileged port
>Jun  4 13:56:33 hemulen kernel: Kernel logging (proc) stopped.
>Jun  4 13:56:33 hemulen kernel: Kernel log daemon terminating.
>Jun  4 13:56:34 hemulen exiting on signal 15
>Jun  4 13:59:06 hemulen syslogd 1.4.1: restart.
>Jun  4 13:59:06 hemulen kernel: klogd 1.4.1, log source = /proc/kmsg started.
>Jun  4 13:59:06 hemulen kernel: Linux version 2.6.20-1.2952.fc6xen (brewbuilder@ls20-bc2-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:37:05 EDT 2007
>Jun  4 13:59:06 hemulen kernel: Command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:59:06 hemulen kernel: BIOS-provided physical RAM map:
>Jun  4 13:59:06 hemulen kernel:  Xen: 0000000000000000 - 0000000076137000 (usable)
>Jun  4 13:59:06 hemulen kernel: end_pfn_map = 483639
>Jun  4 13:59:06 hemulen kernel: Zone PFN ranges:
>Jun  4 13:59:06 hemulen kernel:   DMA             0 ->   483639
>Jun  4 13:59:06 hemulen kernel:   DMA32      483639 ->   483639
>Jun  4 13:59:06 hemulen kernel:   Normal     483639 ->   483639
>Jun  4 13:59:06 hemulen kernel: early_node_map[1] active PFN ranges
>Jun  4 13:59:06 hemulen kernel:     0:        0 ->   483639
>Jun  4 13:59:06 hemulen kernel: DMI 2.4 present.
>Jun  4 13:59:06 hemulen kernel: ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Jun  4 13:59:06 hemulen kernel: ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Jun  4 13:59:06 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>Jun  4 13:59:06 hemulen kernel: ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>Jun  4 13:59:06 hemulen kernel: ACPI: Skipping IOAPIC probe due to 'noapic' option.
>Jun  4 13:59:06 hemulen kernel: Using ACPI for processor (LAPIC) configuration information
>Jun  4 13:59:06 hemulen kernel: Intel MultiProcessor Specification v1.4
>Jun  4 13:59:06 hemulen kernel: MPTABLE: OEM ID: OEM00000 MPTABLE: Product ID: PROD00000000 MPTABLE: APIC at: 0xFEE00000
>Jun  4 13:59:06 hemulen kernel: I/O APIC #2 at 0xFEC00000.
>Jun  4 13:59:06 hemulen kernel: Setting APIC routing to xen
>Jun  4 13:59:06 hemulen kernel: Processors: 2
>Jun  4 13:59:06 hemulen kernel: Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>Jun  4 13:59:06 hemulen kernel: PERCPU: Allocating 26368 bytes of per cpu data
>Jun  4 13:59:06 hemulen kernel: Built 1 zonelists.  Total pages: 475861
>Jun  4 13:59:06 hemulen kernel: Kernel command line: ro root=/dev/VolGroup00/root noapic rhgb quiet
>Jun  4 13:59:06 hemulen kernel: Initializing CPU#0
>Jun  4 13:59:06 hemulen kernel: PID hash table entries: 4096 (order: 12, 32768 bytes)
>Jun  4 13:59:06 hemulen kernel: Xen reported: 2210.064 MHz processor.
>Jun  4 13:59:06 hemulen kernel: Console: colour VGA+ 80x25
>Jun  4 13:59:06 hemulen kernel: Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Jun  4 13:59:06 hemulen kernel: Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Jun  4 13:59:06 hemulen kernel: Software IO TLB enabled: 
>Jun  4 13:59:06 hemulen kernel:  Aperture:     2 megabytes
>Jun  4 13:59:06 hemulen kernel:  Kernel range: 0xffff880000c3d000 - 0xffff880000e3d000
>Jun  4 13:59:06 hemulen kernel: PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
>Jun  4 13:59:06 hemulen kernel: Memory: 1875580k/1934556k available (2367k kernel code, 50104k reserved, 1440k data, 196k init)
>Jun  4 13:59:06 hemulen kernel: Calibrating delay using timer specific routine.. 5526.47 BogoMIPS (lpj=11052944)
>Jun  4 13:59:06 hemulen rpc.statd[2644]: Version 1.0.10 Starting
>Jun  4 13:59:06 hemulen kernel: Security Framework v1.0.0 initialized
>Jun  4 13:59:06 hemulen kernel: SELinux:  Initializing.
>Jun  4 13:59:06 hemulen kernel: SELinux:  Starting in permissive mode
>Jun  4 13:59:06 hemulen kernel: selinux_register_security:  Registering secondary module capability
>Jun  4 13:59:06 hemulen kernel: Capability LSM initialized as secondary
>Jun  4 13:59:06 hemulen kernel: Mount-cache hash table entries: 256
>Jun  4 13:59:06 hemulen kernel: CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>Jun  4 13:59:06 hemulen kernel: CPU: L2 Cache: 512K (64 bytes/line)
>Jun  4 13:59:06 hemulen kernel: CPU: Physical Processor ID: 0
>Jun  4 13:59:07 hemulen kernel: CPU: Processor Core ID: 0
>Jun  4 13:59:07 hemulen kernel: (SMP-)alternatives turned off
>Jun  4 13:59:07 hemulen kernel: ACPI: Core revision 20060707
>Jun  4 13:59:07 hemulen kernel: ACPI: setting ELCR to 0200 (from 0ca0)
>Jun  4 13:59:07 hemulen kernel: Brought up 2 CPUs
>Jun  4 13:59:07 hemulen kernel: Initializing CPU#1
>Jun  4 13:59:07 hemulen kernel: migration_cost=213
>Jun  4 13:59:07 hemulen kernel: Grant table initialized
>Jun  4 13:59:07 hemulen kernel: NET: Registered protocol family 16
>Jun  4 13:59:07 hemulen kernel: ACPI: bus type pci registered
>Jun  4 13:59:07 hemulen kernel: PCI: Using configuration type 1
>Jun  4 13:59:07 hemulen kernel: ACPI: Interpreter enabled
>Jun  4 13:59:07 hemulen kernel: ACPI: Using PIC for interrupt routing
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Root Bridge [PCI0] (0000:00)
>Jun  4 13:59:07 hemulen kernel: PCI: Transparent bridge - 0000:00:0e.0
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] (IRQs 5 *7 9 10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:07 hemulen kernel: ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:08 hemulen openvpn[2686]: OpenVPN 2.1_rc2 x86_64-redhat-linux-gnu [SSL] [LZO2] [EPOLL] built on Mar  3 2007
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:08 hemulen openvpn[2686]: MANAGEMENT: TCP Socket listening on 127.0.0.1:7505
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: Diffie-Hellman initialized with 1024 bit key
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: TLS-Auth MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: TUN/TAP device tun0 opened
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: TUN/TAP TX queue length set to 100
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: /sbin/ip link set dev tun0 up mtu 1500
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2686]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2695]: Listening for incoming TCP connection on [undef]:1194
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2695]: Socket Buffers: R=[87380->131072] S=[16384->131072]
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2695]: TCPv4_SERVER link local (bound): [undef]:1194
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2695]: TCPv4_SERVER link remote: [undef]
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen openvpn[2695]: MULTI: multi_init called, r=256 v=256
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen hcid[2711]: Bluetooth HCI daemon
>Jun  4 13:59:08 hemulen openvpn[2695]: IFCONFIG POOL: base=10.8.0.4 size=62
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen hcid[2711]: Register path:/org/bluez fallback:1
>Jun  4 13:59:08 hemulen openvpn[2695]: IFCONFIG POOL LIST
>Jun  4 13:59:08 hemulen sdpd[2715]: Bluetooth SDP daemon 
>Jun  4 13:59:08 hemulen kernel: ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0, disabled.
>Jun  4 13:59:08 hemulen hcid[2711]: HCI dev 0 registered
>Jun  4 13:59:08 hemulen openvpn[2695]: lilla-my,10.8.0.4
>Jun  4 13:59:09 hemulen kernel: Linux Plug and Play Support v0.97 (c) Adam Belay
>Jun  4 13:59:09 hemulen hcid[2711]: Register path:/org/bluez/hci0 fallback:0
>Jun  4 13:59:09 hemulen openvpn[2695]: knyttet,10.8.0.8
>Jun  4 13:59:09 hemulen kernel: pnp: PnP ACPI init
>Jun  4 13:59:09 hemulen hcid[2711]: HCI dev 0 up
>Jun  4 13:59:09 hemulen openvpn[2695]: lilla-my,10.8.0.12
>Jun  4 13:59:09 hemulen kernel: pnp: PnP ACPI: found 14 devices
>Jun  4 13:59:09 hemulen hcid[2711]: Device hci0 has been added
>Jun  4 13:59:09 hemulen openvpn[2695]: MULTI: TCP INIT maxclients=1024 maxevents=1028
>Jun  4 13:59:09 hemulen kernel: xen_mem: Initialising balloon driver.
>Jun  4 13:59:09 hemulen hcid[2711]: Starting security manager 0
>Jun  4 13:59:09 hemulen openvpn[2695]: Initialization Sequence Completed
>Jun  4 13:59:09 hemulen kernel: usbcore: registered new interface driver usbfs
>Jun  4 13:59:09 hemulen hidd[2769]: Bluetooth HID daemon
>Jun  4 13:59:09 hemulen hcid[2711]: Device hci0 has been activated
>Jun  4 13:59:09 hemulen kernel: usbcore: registered new interface driver hub
>Jun  4 13:59:09 hemulen kernel: usbcore: registered new device driver usb
>Jun  4 13:59:09 hemulen kernel: PCI: Using ACPI for IRQ routing
>Jun  4 13:59:09 hemulen kernel: PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>Jun  4 13:59:09 hemulen kernel: NetLabel: Initializing
>Jun  4 13:59:09 hemulen kernel: NetLabel:  domain hash size = 128
>Jun  4 13:59:09 hemulen kernel: NetLabel:  protocols = UNLABELED CIPSOv4
>Jun  4 13:59:09 hemulen kernel: NetLabel:  unlabeled traffic allowed by default
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1000-0x107f could not be reserved
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1480-0x14ff could not be reserved
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>Jun  4 13:59:09 hemulen kernel: pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>Jun  4 13:59:10 hemulen automount[2790]: lookup_read_master: lookup(nisplus): couldn't locat nis+ table auto.master
>Jun  4 13:59:10 hemulen kernel: PCI: Bridge: 0000:00:04.0
>Jun  4 13:59:10 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:10 hemulen kernel:   MEM window: disabled.
>Jun  4 13:59:10 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:10 hemulen kernel: PCI: Bridge: 0000:00:0e.0
>Jun  4 13:59:10 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:10 hemulen openvpn[2695]: MULTI: multi_create_instance called
>Jun  4 13:59:10 hemulen kernel:   MEM window: fdf00000-fdffffff
>Jun  4 13:59:10 hemulen openvpn[2695]: Re-using SSL/TLS context
>Jun  4 13:59:10 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:10 hemulen openvpn[2695]: LZO compression initialized
>Jun  4 13:59:10 hemulen kernel: PCI: Bridge: 0000:03:00.0
>Jun  4 13:59:10 hemulen openvpn[2695]: Control Channel MTU parms [ L:1544 D:140 EF:40 EB:0 ET:0 EL:0 ]
>Jun  4 13:59:10 hemulen kernel:   IO window: a000-afff
>Jun  4 13:59:10 hemulen openvpn[2695]: Data Channel MTU parms [ L:1544 D:1450 EF:44 EB:135 ET:0 EL:0 AF:3/1 ]
>Jun  4 13:59:10 hemulen kernel:   MEM window: fdc00000-fddfffff
>Jun  4 13:59:10 hemulen openvpn[2695]: Local Options hash (VER=V4): 'c0103fa8'
>Jun  4 13:59:10 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:59:10 hemulen openvpn[2695]: Expected Remote Options hash (VER=V4): '69109d17'
>Jun  4 13:59:10 hemulen kernel: PCI: Bridge: 0000:03:00.1
>Jun  4 13:59:10 hemulen openvpn[2695]: TCP connection established with 83.183.6.13:35555
>Jun  4 13:59:10 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:10 hemulen openvpn[2695]: Socket Buffers: R=[131072->131072] S=[131072->131072]
>Jun  4 13:59:10 hemulen kernel:   MEM window: disabled.
>Jun  4 13:59:10 hemulen openvpn[2695]: TCPv4_SERVER link local: [undef]
>Jun  4 13:59:10 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:10 hemulen openvpn[2695]: TCPv4_SERVER link remote: 83.183.6.13:35555
>Jun  4 13:59:10 hemulen hpiod: 1.7.2 accepting connections at 2208... 
>Jun  4 13:59:10 hemulen kernel: PCI: Bridge: 0000:00:12.0
>Jun  4 13:59:10 hemulen kernel:   IO window: a000-afff
>Jun  4 13:59:10 hemulen kernel:   MEM window: fdc00000-fdefffff
>Jun  4 13:59:11 hemulen kernel:   PREFETCH window: 80000000-800fffff
>Jun  4 13:59:11 hemulen openvpn[2695]: 83.183.6.13:35555 TLS: Initial packet from 83.183.6.13:35555, sid=ad59e295 080b86b8
>Jun  4 13:59:11 hemulen kernel: PCI: Bridge: 0000:00:14.0
>Jun  4 13:59:11 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:11 hemulen kernel:   MEM window: disabled.
>Jun  4 13:59:11 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:11 hemulen kernel: PCI: Bridge: 0000:00:15.0
>Jun  4 13:59:11 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:11 hemulen kernel:   MEM window: disabled.
>Jun  4 13:59:11 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:11 hemulen kernel: PCI: Bridge: 0000:00:16.0
>Jun  4 13:59:11 hemulen kernel:   IO window: 9000-9fff
>Jun  4 13:59:11 hemulen kernel:   MEM window: fdb00000-fdbfffff
>Jun  4 13:59:11 hemulen kernel:   PREFETCH window: disabled.
>Jun  4 13:59:11 hemulen kernel: PCI: Bridge: 0000:00:17.0
>Jun  4 13:59:11 hemulen kernel:   IO window: disabled.
>Jun  4 13:59:11 hemulen kernel:   MEM window: f4000000-fbffffff
>Jun  4 13:59:11 hemulen kernel:   PREFETCH window: e8000000-efffffff
>Jun  4 13:59:12 hemulen kernel: ACPI: PCI Interrupt Link [LNK7] enabled at IRQ 5
>Jun  4 13:59:12 hemulen kernel: ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [LNK7] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:12 hemulen kernel: NET: Registered protocol family 2
>Jun  4 13:59:12 hemulen kernel: IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>Jun  4 13:59:12 hemulen kernel: TCP established hash table entries: 131072 (order: 10, 4194304 bytes)
>Jun  4 13:59:12 hemulen kernel: TCP bind hash table entries: 65536 (order: 9, 2097152 bytes)
>Jun  4 13:59:12 hemulen kernel: TCP: Hash tables configured (established 131072 bind 65536)
>Jun  4 13:59:12 hemulen kernel: TCP reno registered
>Jun  4 13:59:12 hemulen kernel: checking if image is initramfs... it is
>Jun  4 13:59:12 hemulen kernel: Freeing initrd memory: 5823k freed
>Jun  4 13:59:12 hemulen kernel: IA-32 Microcode Update Driver: v1.14-xen <tigran@veritas.com>
>Jun  4 13:59:12 hemulen kernel: audit: initializing netlink socket (disabled)
>Jun  4 13:59:12 hemulen kernel: audit(1180958305.372:1): initialized
>Jun  4 13:59:12 hemulen kernel: VFS: Disk quotas dquot_6.5.1
>Jun  4 13:59:12 hemulen kernel: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>Jun  4 13:59:12 hemulen kernel: SELinux:  Registering netfilter hooks
>Jun  4 13:59:13 hemulen kernel: ksign: Installing public key data
>Jun  4 13:59:13 hemulen kernel: Loading keyring
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 VERIFY OK: depth=1, /C=SE/ST=BD/L=Lulea/O=KLN/CN=KLN/emailAddress=kln@kolmodin.net
>Jun  4 13:59:13 hemulen kernel: - Added public key A2C7955D82CFA151
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 VERIFY OK: depth=0, /C=SE/ST=CA/L=Lulea/O=KLN/CN=lilla-my/emailAddress=mk@kolmodin.net
>Jun  4 13:59:13 hemulen kernel: - User ID: Red Hat, Inc. (Kernel Module GPG key)
>Jun  4 13:59:13 hemulen kernel: io scheduler noop registered
>Jun  4 13:59:13 hemulen kernel: io scheduler anticipatory registered
>Jun  4 13:59:13 hemulen kernel: io scheduler deadline registered
>Jun  4 13:59:13 hemulen kernel: io scheduler cfq registered (default)
>Jun  4 13:59:13 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:59:13 hemulen last message repeated 2 times
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key
>Jun  4 13:59:13 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:59:13 hemulen openvpn[2695]: 83.183.6.13:35555 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication
>Jun  4 13:59:13 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:59:13 hemulen kernel: assign_interrupt_mode Found MSI capability
>Jun  4 13:59:13 hemulen kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Jun  4 13:59:13 hemulen kernel: ACPI: Fan [FAN] (on)
>Jun  4 13:59:13 hemulen kernel: ACPI: Thermal Zone [THRM] (40 C)
>Jun  4 13:59:14 hemulen kernel: Real Time Clock Driver v1.12ac
>Jun  4 13:59:14 hemulen openvpn[2695]: 83.183.6.13:35555 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA
>Jun  4 13:59:14 hemulen kernel: hpet_acpi_add: no address or irqs in _CRS
>Jun  4 13:59:14 hemulen openvpn[2695]: 83.183.6.13:35555 [lilla-my] Peer Connection Initiated with 83.183.6.13:35555
>Jun  4 13:59:14 hemulen kernel: Non-volatile memory driver v1.2
>Jun  4 13:59:14 hemulen openvpn[2695]: lilla-my/83.183.6.13:35555 MULTI: Learn: 10.8.0.6 -> lilla-my/83.183.6.13:35555
>Jun  4 13:59:14 hemulen kernel: Linux agpgart interface v0.101 (c) Dave Jones
>Jun  4 13:59:14 hemulen openvpn[2695]: lilla-my/83.183.6.13:35555 MULTI: primary virtual IP for lilla-my/83.183.6.13:35555: 10.8.0.6
>Jun  4 13:59:14 hemulen kernel: RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Jun  4 13:59:14 hemulen kernel: input: Macintosh mouse button emulation as /class/input/input0
>Jun  4 13:59:14 hemulen kernel: Xen virtual console successfully installed as ttyS0
>Jun  4 13:59:14 hemulen kernel: Event-channel device installed.
>Jun  4 13:59:14 hemulen kernel: Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>Jun  4 13:59:14 hemulen kernel: ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>Jun  4 13:59:14 hemulen kernel: NFORCE-MCP55: IDE controller at PCI slot 0000:00:0c.0
>Jun  4 13:59:14 hemulen kernel: NFORCE-MCP55: chipset revision 161
>Jun  4 13:59:14 hemulen kernel: NFORCE-MCP55: not 100% native mode: will probe irqs later
>Jun  4 13:59:14 hemulen kernel: NFORCE-MCP55: BIOS didn't set cable bits correctly. Enabling workaround.
>Jun  4 13:59:14 hemulen kernel: NFORCE-MCP55: 0000:00:0c.0 (rev a1) UDMA133 controller
>Jun  4 13:59:14 hemulen kernel:     ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA, hdb:DMA
>Jun  4 13:59:14 hemulen kernel: hdb: LITE-ON DVDRW SHW-160P6S, ATAPI CD/DVD-ROM drive
>Jun  4 13:59:14 hemulen kernel: ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Jun  4 13:59:14 hemulen kernel: ide-floppy driver 0.99.newide
>Jun  4 13:59:14 hemulen kernel: usbcore: registered new interface driver libusual
>Jun  4 13:59:14 hemulen kernel: usbcore: registered new interface driver hiddev
>Jun  4 13:59:14 hemulen kernel: usbcore: registered new interface driver usbhid
>Jun  4 13:59:14 hemulen kernel: drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>Jun  4 13:59:14 hemulen kernel: PNP: PS/2 Controller [PNP0f13:PS2M] at 0x60,0x64 irq 12
>Jun  4 13:59:14 hemulen kernel: PNP: PS/2 controller doesn't have KBD irq; using default 1
>Jun  4 13:59:14 hemulen kernel: serio: i8042 KBD port at 0x60,0x64 irq 1
>Jun  4 13:59:14 hemulen kernel: serio: i8042 AUX port at 0x60,0x64 irq 12
>Jun  4 13:59:14 hemulen openvpn[2695]: lilla-my/83.183.6.13:35555 PUSH: Received control message: 'PUSH_REQUEST'
>Jun  4 13:59:14 hemulen kernel: mice: PS/2 mouse device common for all mice
>Jun  4 13:59:14 hemulen openvpn[2695]: lilla-my/83.183.6.13:35555 SENT CONTROL [lilla-my]: 'PUSH_REPLY,route 192.168.0.0 255.255.255.0,route 10.8.0.1,topology net30,ping 10,ping-restart 120,ifconfig 10.8.0.6 10.8.0.5' (status=1)
>Jun  4 13:59:15 hemulen kernel: TCP bic registered
>Jun  4 13:59:15 hemulen kernel: Initializing XFRM netlink socket
>Jun  4 13:59:15 hemulen kernel: NET: Registered protocol family 1
>Jun  4 13:59:15 hemulen kernel: NET: Registered protocol family 17
>Jun  4 13:59:15 hemulen kernel: Write protecting the kernel read-only data: 998k
>Jun  4 13:59:15 hemulen kernel: firmware_class: attempt to set timeout to 10
>Jun  4 13:59:15 hemulen kernel: USB Universal Host Controller Interface driver v3.0
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt Link [LUBA] enabled at IRQ 7
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LUBA] -> GSI 7 (level, low) -> IRQ 7
>Jun  4 13:59:15 hemulen kernel: ohci_hcd 0000:00:0a.0: OHCI Host Controller
>Jun  4 13:59:15 hemulen kernel: ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>Jun  4 13:59:15 hemulen kernel: ohci_hcd 0000:00:0a.0: irq 7, io mem 0xfe02f000
>Jun  4 13:59:15 hemulen kernel: input: PS2++ Logitech Wheel Mouse as /class/input/input1
>Jun  4 13:59:15 hemulen kernel: usb usb1: configuration #1 chosen from 1 choice
>Jun  4 13:59:15 hemulen kernel: hub 1-0:1.0: USB hub found
>Jun  4 13:59:15 hemulen kernel: hub 1-0:1.0: 10 ports detected
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 5
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [LUB2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:15 hemulen kernel: ehci_hcd 0000:00:0a.1: EHCI Host Controller
>Jun  4 13:59:15 hemulen kernel: ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>Jun  4 13:59:15 hemulen kernel: ehci_hcd 0000:00:0a.1: debug port 1
>Jun  4 13:59:15 hemulen kernel: ehci_hcd 0000:00:0a.1: irq 5, io mem 0xfe02e000
>Jun  4 13:59:15 hemulen kernel: ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>Jun  4 13:59:15 hemulen kernel: usb usb2: configuration #1 chosen from 1 choice
>Jun  4 13:59:15 hemulen kernel: hub 2-0:1.0: USB hub found
>Jun  4 13:59:15 hemulen kernel: hub 2-0:1.0: 10 ports detected
>Jun  4 13:59:15 hemulen kernel: SCSI subsystem initialized
>Jun  4 13:59:15 hemulen kernel: Fusion MPT base driver 3.04.03
>Jun  4 13:59:15 hemulen kernel: Copyright (c) 1999-2007 LSI Logic Corporation
>Jun  4 13:59:15 hemulen kernel: Fusion MPT SPI Host driver 3.04.03
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt Link [LNK8] enabled at IRQ 11
>Jun  4 13:59:15 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.0[A] -> Link [LNK8] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:59:15 hemulen kernel: mptbase: Initiating ioc0 bringup
>Jun  4 13:59:15 hemulen kernel: ioc0: 53C1030: Capabilities={Initiator}
>Jun  4 13:59:15 hemulen kernel: scsi0 : ioc0: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=11
>Jun  4 13:59:15 hemulen kernel: usb 1-3: new low speed USB device using ohci_hcd and address 2
>Jun  4 13:59:15 hemulen kernel: usb 1-3: configuration #1 chosen from 1 choice
>Jun  4 13:59:15 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input2
>Jun  4 13:59:15 hemulen kernel: input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:59:15 hemulen kernel: input: NOVATEK USB Keyboard as /class/input/input3
>Jun  4 13:59:15 hemulen kernel: input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on usb-0000:00:0a.0-3
>Jun  4 13:59:16 hemulen kernel: usb 1-4: new full speed USB device using ohci_hcd and address 3
>Jun  4 13:59:16 hemulen kernel: usb 1-4: configuration #1 chosen from 1 choice
>Jun  4 13:59:16 hemulen kernel: usb 1-10: new full speed USB device using ohci_hcd and address 4
>Jun  4 13:59:16 hemulen kernel: usb 1-10: configuration #1 chosen from 2 choices
>Jun  4 13:59:16 hemulen kernel: scsi 0:0:0:0: Direct-Access     LSILOGIC RAID ARRAY    IS 1000 PQ: 0 ANSI: 2
>Jun  4 13:59:16 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:59:16 hemulen kernel: sda: Write Protect is off
>Jun  4 13:59:16 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:59:16 hemulen kernel: SCSI device sda: 141950976 512-byte hdwr sectors (72679 MB)
>Jun  4 13:59:16 hemulen kernel: sda: Write Protect is off
>Jun  4 13:59:16 hemulen kernel: SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:59:16 hemulen kernel:  sda: sda1 sda2
>Jun  4 13:59:16 hemulen kernel: sd 0:0:0:0: Attached scsi disk sda
>Jun  4 13:59:16 hemulen kernel: scsi 0:1:0:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:59:16 hemulen kernel:  target0:1:0: Beginning Domain Validation
>Jun  4 13:59:16 hemulen kernel:  target0:1:0: Ending Domain Validation
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:59:16 hemulen kernel:  target0:1:0: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:59:16 hemulen kernel: scsi 0:1:2:0: Direct-Access     SEAGATE  ST336607LC       DS09 PQ: 0 ANSI: 3
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled, quiesced
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online, quiesced
>Jun  4 13:59:16 hemulen kernel:  target0:1:2: Beginning Domain Validation
>Jun  4 13:59:16 hemulen kernel:  target0:1:2: Ending Domain Validation
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for VolumeID 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   volume is now optimal, enabled
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 0
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0: RAID STATUS CHANGE for PhysDisk 1
>Jun  4 13:59:16 hemulen kernel: mptbase: ioc0:   PhysDisk is now online
>Jun  4 13:59:16 hemulen kernel:  target0:1:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU RTI WRFLOW PCOMP (6.25 ns, offset 63)
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt Link [LNK5] enabled at IRQ 10
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt 0000:04:01.1[B] -> Link [LNK5] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:59:16 hemulen kernel: mptbase: Initiating ioc1 bringup
>Jun  4 13:59:16 hemulen kernel: ioc1: 53C1030: Capabilities={Initiator}
>Jun  4 13:59:16 hemulen kernel: scsi1 : ioc1: LSI53C1030, FwRev=01032700h, Ports=1, MaxQ=222, IRQ=10
>Jun  4 13:59:16 hemulen kernel: shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
>Jun  4 13:59:16 hemulen kernel: shpchp: Can't get msi for the hotplug controller
>Jun  4 13:59:16 hemulen kernel: shpchp: Use INTx for the hotplug controller
>Jun  4 13:59:16 hemulen kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt Link [LSID] enabled at IRQ 5
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LSID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:16 hemulen kernel: ata1: SATA max UDMA/133 cmd 0x9F0 ctl 0xBF2 bmdma 0xE000 irq 5
>Jun  4 13:59:16 hemulen kernel: ata2: SATA max UDMA/133 cmd 0x970 ctl 0xB72 bmdma 0xE008 irq 5
>Jun  4 13:59:16 hemulen kernel: scsi2 : sata_nv
>Jun  4 13:59:16 hemulen kernel: ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
>Jun  4 13:59:16 hemulen kernel: ata1.00: ATA-7, max UDMA7, 312581808 sectors: LBA48 NCQ (depth 0/32)
>Jun  4 13:59:16 hemulen kernel: ata1.00: ata1: dev 0 multi count 1
>Jun  4 13:59:16 hemulen kernel: ata1.00: configured for UDMA/133
>Jun  4 13:59:16 hemulen kernel: scsi3 : sata_nv
>Jun  4 13:59:16 hemulen kernel: ata2: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:59:16 hemulen kernel: ATA: abnormal status 0x7F on port 0x977
>Jun  4 13:59:16 hemulen kernel: scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG HD160JJ  ZM10 PQ: 0 ANSI: 5
>Jun  4 13:59:16 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:59:16 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:59:16 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:59:16 hemulen kernel: SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
>Jun  4 13:59:16 hemulen kernel: sdb: Write Protect is off
>Jun  4 13:59:16 hemulen kernel: SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>Jun  4 13:59:16 hemulen kernel:  sdb: sdb1 sdb2 sdb3 sdb4 < sdb5 sdb6 >
>Jun  4 13:59:16 hemulen kernel: sd 2:0:0:0: Attached scsi disk sdb
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt Link [LFID] enabled at IRQ 5
>Jun  4 13:59:16 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [LFID] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:16 hemulen kernel: ata3: SATA max UDMA/133 cmd 0x9E0 ctl 0xBE2 bmdma 0xCC00 irq 5
>Jun  4 13:59:16 hemulen kernel: ata4: SATA max UDMA/133 cmd 0x960 ctl 0xB62 bmdma 0xCC08 irq 5
>Jun  4 13:59:16 hemulen kernel: scsi4 : sata_nv
>Jun  4 13:59:16 hemulen kernel: ata3: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:59:16 hemulen kernel: ATA: abnormal status 0x7F on port 0x9E7
>Jun  4 13:59:16 hemulen kernel: scsi5 : sata_nv
>Jun  4 13:59:16 hemulen kernel: ata4: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:59:16 hemulen kernel: ATA: abnormal status 0x7F on port 0x967
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt Link [LSA2] enabled at IRQ 5
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [LSA2] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:17 hemulen kernel: ata5: SATA max UDMA/133 cmd 0xC800 ctl 0xC402 bmdma 0xB800 irq 5
>Jun  4 13:59:17 hemulen kernel: ata6: SATA max UDMA/133 cmd 0xC000 ctl 0xBC02 bmdma 0xB808 irq 5
>Jun  4 13:59:17 hemulen kernel: scsi6 : sata_nv
>Jun  4 13:59:17 hemulen kernel: ata5: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:59:17 hemulen kernel: ATA: abnormal status 0x7F on port 0xC807
>Jun  4 13:59:17 hemulen kernel: scsi7 : sata_nv
>Jun  4 13:59:17 hemulen kernel: ata6: SATA link down (SStatus 0 SControl 300)
>Jun  4 13:59:17 hemulen kernel: ATA: abnormal status 0x7F on port 0xC007
>Jun  4 13:59:17 hemulen kernel: device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>Jun  4 13:59:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:59:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:59:17 hemulen kernel: SELinux:  Disabled at runtime.
>Jun  4 13:59:17 hemulen kernel: SELinux:  Unregistering netfilter hooks
>Jun  4 13:59:17 hemulen kernel: audit(1180958322.749:2): selinux=0 auid=4294967295
>Jun  4 13:59:17 hemulen kernel: cdc_acm 1-10:1.0: ttyACM0: USB ACM device
>Jun  4 13:59:17 hemulen kernel: usbcore: registered new interface driver cdc_acm
>Jun  4 13:59:17 hemulen kernel: drivers/usb/class/cdc-acm.c: v0.25:USB Abstract Control Model driver for USB modems and ISDN adapters
>Jun  4 13:59:17 hemulen kernel: Bluetooth: Core ver 2.11
>Jun  4 13:59:17 hemulen kernel: NET: Registered protocol family 31
>Jun  4 13:59:17 hemulen kernel: Bluetooth: HCI device and connection manager initialized
>Jun  4 13:59:17 hemulen kernel: Bluetooth: HCI socket layer initialized
>Jun  4 13:59:17 hemulen xinetd[2864]: xinetd Version 2.3.14 started with libwrap loadavg labeled-networking options compiled in.
>Jun  4 13:59:17 hemulen kernel: hdb: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache<6>hdb: hw_config=4101
>Jun  4 13:59:17 hemulen xinetd[2864]: Started working: 2 available services
>Jun  4 13:59:17 hemulen kernel: , UDMA(66)
>Jun  4 13:59:17 hemulen kernel: Uniform CD-ROM driver Revision: 3.20
>Jun  4 13:59:17 hemulen kernel: Bluetooth: HCI USB driver ver 2.9
>Jun  4 13:59:17 hemulen kernel: usbcore: registered new interface driver hci_usb
>Jun  4 13:59:17 hemulen kernel: Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Jun  4 13:59:17 hemulen kernel: 8250_pnp: Unknown symbol serial8250_unregister_port
>Jun  4 13:59:17 hemulen kernel: 8250_pnp: Unknown symbol serial8250_register_port
>Jun  4 13:59:17 hemulen kernel: parport: PnPBIOS parport detected.
>Jun  4 13:59:17 hemulen kernel: parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>Jun  4 13:59:17 hemulen kernel: IRQ handler type mismatch for IRQ 7
>Jun  4 13:59:17 hemulen kernel: current handler: ohci_hcd:usb1
>Jun  4 13:59:17 hemulen kernel: 
>Jun  4 13:59:17 hemulen kernel: Call Trace:
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff802a6384>] setup_irq+0x1bf/0x1e5
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8816e15e>] :parport_pc:parport_pc_interrupt+0x0/0x4b
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff802a643b>] request_irq+0x91/0xb4
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8816df42>] :parport_pc:parport_pc_probe_port+0x6e1/0x835
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8816e140>] :parport_pc:parport_pc_pnp_probe+0xaa/0xc8
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8036fb79>] pnp_device_probe+0x7b/0x9e
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038df42>] really_probe+0x87/0x106
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038e193>] __driver_attach+0x90/0xcd
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038e103>] __driver_attach+0x0/0xcd
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038e103>] __driver_attach+0x0/0xcd
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038d41c>] bus_for_each_dev+0x43/0x6e
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8038d764>] bus_add_driver+0x6b/0x18d
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff88118393>] :parport_pc:parport_pc_init+0x2b2/0x356
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8029240e>] kthread_stop+0x75/0x79
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8029a2b1>] sys_init_module+0x1797/0x1904
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8025b7b6>] system_call+0x86/0x8b
>Jun  4 13:59:17 hemulen kernel:  [<ffffffff8025b730>] system_call+0x0/0x8b
>Jun  4 13:59:17 hemulen kernel: 
>Jun  4 13:59:17 hemulen kernel: parport0: irq 7 in use, resorting to polled operation
>Jun  4 13:59:17 hemulen kernel: EDAC MC: Ver: 2.0.1 May 16 2007
>Jun  4 13:59:17 hemulen kernel: EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>Jun  4 13:59:17 hemulen kernel: forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.59.
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 11
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LMAC] -> GSI 11 (level, low) -> IRQ 11
>Jun  4 13:59:17 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:59:17 hemulen kernel: input: PC Speaker as /class/input/input4
>Jun  4 13:59:17 hemulen kernel: eth0: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:10.0
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt Link [LMC1] enabled at IRQ 5
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LMC1] -> GSI 5 (level, low) -> IRQ 5
>Jun  4 13:59:17 hemulen kernel: forcedeth: using HIGHDMA
>Jun  4 13:59:17 hemulen kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
>Jun  4 13:59:17 hemulen kernel: scsi 0:1:0:0: Attached scsi generic sg1 type 0
>Jun  4 13:59:17 hemulen kernel: scsi 0:1:2:0: Attached scsi generic sg2 type 0
>Jun  4 13:59:17 hemulen kernel: sd 2:0:0:0: Attached scsi generic sg3 type 0
>Jun  4 13:59:17 hemulen kernel: Floppy drive(s): fd0 is 1.44M
>Jun  4 13:59:17 hemulen kernel: FDC 0 is a post-1991 82077
>Jun  4 13:59:17 hemulen kernel: eth1: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:11.0
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 10
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [LAZA] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:59:17 hemulen kernel: hda_codec: Unknown model for AD1988, trying auto-probe from BIOS...
>Jun  4 13:59:17 hemulen kernel: i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>Jun  4 13:59:17 hemulen kernel: i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt Link [LNK4] enabled at IRQ 10
>Jun  4 13:59:17 hemulen kernel: ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [LNK4] -> GSI 10 (level, low) -> IRQ 10
>Jun  4 13:59:17 hemulen kernel: ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10]  MMIO=[fdfff000-fdfff7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
>Jun  4 13:59:17 hemulen kernel: lp0: using parport0 (polling).
>Jun  4 13:59:17 hemulen kernel: lp0: console ready
>Jun  4 13:59:17 hemulen kernel: NET: Registered protocol family 10
>Jun  4 13:59:17 hemulen kernel: lo: Disabled Privacy Extensions
>Jun  4 13:59:17 hemulen kernel: Mobile IPv6
>Jun  4 13:59:17 hemulen kernel: input: Power Button (FF) as /class/input/input5
>Jun  4 13:59:17 hemulen kernel: ACPI: Power Button (FF) [PWRF]
>Jun  4 13:59:17 hemulen kernel: input: Power Button (CM) as /class/input/input6
>Jun  4 13:59:17 hemulen kernel: ACPI: Power Button (CM) [PWRB]
>Jun  4 13:59:17 hemulen kernel: No dock devices found.
>Jun  4 13:59:17 hemulen kernel: ibm_acpi: ec object not found
>Jun  4 13:59:17 hemulen kernel: md: Autodetecting RAID arrays.
>Jun  4 13:59:17 hemulen kernel: md: autorun ...
>Jun  4 13:59:17 hemulen kernel: md: ... autorun DONE.
>Jun  4 13:59:17 hemulen kernel: device-mapper: multipath: version 1.0.5 loaded
>Jun  4 13:59:17 hemulen kernel: EXT3 FS on dm-0, internal journal
>Jun  4 13:59:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:59:17 hemulen kernel: EXT3 FS on sda1, internal journal
>Jun  4 13:59:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:59:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:59:17 hemulen kernel: EXT3 FS on dm-1, internal journal
>Jun  4 13:59:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:59:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:59:17 hemulen kernel: EXT3 FS on dm-3, internal journal
>Jun  4 13:59:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:59:17 hemulen kernel: kjournald starting.  Commit interval 5 seconds
>Jun  4 13:59:17 hemulen kernel: EXT3 FS on dm-2, internal journal
>Jun  4 13:59:17 hemulen kernel: EXT3-fs: mounted filesystem with ordered data mode.
>Jun  4 13:59:17 hemulen kernel: Adding 1614524k swap on /dev/sdb3.  Priority:-1 extents:1 across:1614524k
>Jun  4 13:59:17 hemulen kernel: Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-2 extents:1 across:2031608k
>Jun  4 13:59:17 hemulen kernel: tun: Universal TUN/TAP device driver, 1.6
>Jun  4 13:59:17 hemulen kernel: tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>Jun  4 13:59:17 hemulen kernel: Bluetooth: L2CAP ver 2.8
>Jun  4 13:59:17 hemulen kernel: Bluetooth: L2CAP socket layer initialized
>Jun  4 13:59:17 hemulen kernel: Bluetooth: RFCOMM socket layer initialized
>Jun  4 13:59:17 hemulen kernel: Bluetooth: RFCOMM TTY layer initialized
>Jun  4 13:59:17 hemulen kernel: Bluetooth: RFCOMM ver 1.8
>Jun  4 13:59:17 hemulen kernel: Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>Jun  4 13:59:26 hemulen ntpdate[2879]: step time server 76.169.237.141 offset -0.453582 sec
>Jun  4 13:59:26 hemulen ntpd[2881]: ntpd 4.2.4p0@1.1472 Wed Mar  7 18:53:03 UTC 2007 (1)
>Jun  4 13:59:26 hemulen ntpd[2882]: precision = 1.000 usec
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #0 wildcard, 0.0.0.0#123 Disabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #1 wildcard, ::#123 Disabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #2 eth0, fe80::217:31ff:fec4:640c#123 Enabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #3 lo, ::1#123 Enabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #4 lo, 127.0.0.1#123 Enabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #5 eth0, 192.168.0.100#123 Enabled
>Jun  4 13:59:26 hemulen ntpd[2882]: Listening on interface #6 tun0, 10.8.0.1#123 Enabled
>Jun  4 13:59:26 hemulen ntpd[2882]: kernel time sync status 0040
>Jun  4 13:59:27 hemulen ntpd[2882]: frequency initialized 133.555 PPM from /var/lib/ntp/drift
>Jun  4 13:59:28 hemulen gpm[2947]: *** info [startup.c(95)]: 
>Jun  4 13:59:28 hemulen gpm[2947]: Started gpm successfully. Entered daemon mode.
>Jun  4 13:59:29 hemulen saslauthd[3027]: detach_tty      : master pid is: 3027
>Jun  4 13:59:29 hemulen saslauthd[3027]: ipc_init        : listening on socket: /var/run/saslauthd/mux

Actions: View

Attachments on bug 240765: 156196 | 156986