Attachment 156227 Details for Bug 242711 – dmesg

dmesg

dmesg (text/plain), 27.63 KB, created by Daniel Rowe on 2007-06-05 14:32:09 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Rowe

Created: 2007-06-05 14:32:09 UTC

Size: 27.63 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@hammer2.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:47:07 EDT 2007
>Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
> BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007feb0000 (usable)
> BIOS-e820: 000000007feb0000 - 000000007fee3000 (ACPI NVS)
> BIOS-e820: 000000007fee3000 - 000000007fef0000 (ACPI data)
> BIOS-e820: 000000007fef0000 - 000000007ff00000 (reserved)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523952) 1 entries of 3200 used
>end_pfn_map = 1048576
>DMI 2.4 present.
>ACPI: RSDP 000F7C70, 0024 (r2 Nvidia)
>ACPI: XSDT 7FEE3100, 004C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: FACP 7FEEC840, 00F4 (r3 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: DSDT 7FEE3280, 9569 (r1 NVIDIA AWRDACPI     1000 MSFT  3000000)
>ACPI: FACS 7FEB0000, 0040
>ACPI: TCPA 7FEECA40, 0032 (r1    HTC  HTCACPI 42302E31 AWRD        0)
>ACPI: HPET 7FEECAC0, 0038 (r1 Nvidia ASUSACPI 42302E31 AWRD       98)
>ACPI: MCFG 7FEECB40, 003C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>ACPI: APIC 7FEEC980, 007C (r1 Nvidia ASUSACPI 42302E31 AWRD        0)
>Scanning NUMA topology in Northbridge 24
>Number of nodes 1
>Node 0 MemBase 0000000000000000 Limit 000000007feb0000
>Entering add_active_range(0, 0, 159) 0 entries of 3200 used
>Entering add_active_range(0, 256, 523952) 1 entries of 3200 used
>NUMA: Using 63 for the hash shift.
>Using node hash shift of 63
>Bootmem setup node 0 0000000000000000-000000007feb0000
>Zone PFN ranges:
>  DMA             0 ->     4096
>  DMA32        4096 ->  1048576
>  Normal    1048576 ->  1048576
>early_node_map[2] active PFN ranges
>    0:        0 ->      159
>    0:      256 ->   523952
>On node 0 totalpages: 523855
>  DMA zone: 56 pages used for memmap
>  DMA zone: 1279 pages reserved
>  DMA zone: 2664 pages, LIFO batch:0
>  DMA32 zone: 7107 pages used for memmap
>  DMA32 zone: 512749 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 (Bootup-CPU)
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>ACPI: IRQ14 used by override.
>ACPI: IRQ15 used by override.
>Setting APIC routing to physical flat
>ACPI: HPET id: 0x10de8201 base: 0xfefff000
>Using ACPI (MADT) for SMP configuration information
>Nosave address range: 000000000009f000 - 00000000000a0000
>Nosave address range: 00000000000a0000 - 00000000000f0000
>Nosave address range: 00000000000f0000 - 0000000000100000
>Allocating PCI resources starting at 80000000 (gap: 7ff00000:70100000)
>SMP: Allowing 2 CPUs, 0 hotplug CPUs
>PERCPU: Allocating 43648 bytes of per cpu data
>Built 1 zonelists.  Total pages: 515413
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>Initializing CPU#0
>PID hash table entries: 4096 (order: 12, 32768 bytes)
>Extended CMOS year: 2000
>time.c: Detected 2419.998 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
>Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
>Checking aperture...
>CPU 0: aperture @ 9fa2000000 size 32 MB
>Aperture too small (32 MB)
>No AGP bridge found
>Memory: 2054556k/2095808k available (2319k kernel code, 40864k reserved, 1375k data, 316k init)
>Calibrating delay using timer specific routine.. 4843.07 BogoMIPS (lpj=2421538)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 256
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 0/0 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>Using local APIC timer interrupts.
>result 13749992
>Detected 13.749 MHz APIC timer.
>SMP alternatives: switching to SMP code
>Booting processor 1/2 APIC 0x1
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 4839.96 BogoMIPS (lpj=2419980)
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 512K (64 bytes/line)
>CPU 1/1 -> Node 0
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
>Brought up 2 CPUs
>sizeof(vma)=176 bytes
>sizeof(page)=56 bytes
>sizeof(inode)=560 bytes
>sizeof(dentry)=208 bytes
>sizeof(ext3inode)=760 bytes
>sizeof(buffer_head)=104 bytes
>sizeof(skbuff)=248 bytes
>sizeof(task_struct)=1888 bytes
>migration_cost=193
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using configuration type 1
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:0e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK7] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LNK8] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 10 *11 14 15)
>ACPI: PCI Interrupt Link [LMC1] (IRQs 5 *7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LAZA] (IRQs 5 7 9 *10 11 14 15)
>ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LUB2] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LSID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LFID] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
>ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0, disabled.
>ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
>ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
>ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0, disabled.
>ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0
>ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [AMC1] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
>ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
>ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 12 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>hpet0: at MMIO 0xfefff000, IRQs 2, 8, 31
>hpet0: 3 32-bit timers, 25000000 Hz
>pnp: 00:01: ioport range 0x1000-0x107f has been reserved
>pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
>pnp: 00:01: ioport range 0x1400-0x147f has been reserved
>pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
>pnp: 00:01: ioport range 0x1800-0x187f has been reserved
>pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
>pnp: 00:0a: iomem range 0xf0000000-0xf3ffffff could not be reserved
>pnp: 00:0b: iomem range 0xd1000-0xd3fff has been reserved
>pnp: 00:0b: iomem range 0xf0000-0xf7fff could not be reserved
>pnp: 00:0b: iomem range 0xf8000-0xfbfff could not be reserved
>pnp: 00:0b: iomem range 0xfc000-0xfffff could not be reserved
>PCI: Bridge: 0000:00:04.0
>  IO window: a000-afff
>  MEM window: fa000000-fcffffff
>  PREFETCH window: e0000000-efffffff
>PCI: Bridge: 0000:00:0e.0
>  IO window: disabled.
>  MEM window: fdf00000-fdffffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:03:00.1
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:12.0
>  IO window: disabled.
>  MEM window: fde00000-fdefffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:14.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:15.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:16.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.0
>  IO window: disabled.
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fd800000-fdbfffff
>PCI: Bridge: 0000:09:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:17.0
>  IO window: disabled.
>  MEM window: fdd00000-fddfffff
>  PREFETCH window: fd800000-fdbfffff
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:0e.0 to 64
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>Time: hpet clocksource has been installed.
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>ACPI: PCI Interrupt Link [APC7] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:03:00.1[A] -> Link [APC7] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:03:00.1 to 64
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>PCI: Setting latency timer of device 0000:09:00.2 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
>TCP established hash table entries: 131072 (order: 9, 3145728 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3735k freed
>audit: initializing netlink socket (disabled)
>audit(1181081370.225:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key F2580AE679027173
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>PCI: Setting latency timer of device 0000:00:12.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:12.0:pcie00]
>PCI: Setting latency timer of device 0000:00:14.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:14.0:pcie00]
>PCI: Setting latency timer of device 0000:00:15.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:15.0:pcie00]
>PCI: Setting latency timer of device 0000:00:16.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:16.0:pcie00]
>PCI: Setting latency timer of device 0000:00:17.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:17.0:pcie00]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Fan [FAN] (on)
>ACPI: Thermal Zone [THRM] (40 C)
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfefff000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
>PNP: PS/2 controller doesn't have AUX irq; using default 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
>powernow-k8: MP systems not supported by PSB BIOS structure
>powernow-k8: MP systems not supported by PSB BIOS structure
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 316k freed
>Write protecting the kernel read-only data: 1032k
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [APCF] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0a.0 to 64
>ohci_hcd 0000:00:0a.0: OHCI Host Controller
>ohci_hcd 0000:00:0a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:0a.0: irq 23, io mem 0xfe02f000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 10 ports detected
>ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:0a.1[B] -> Link [APCL] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:0a.1 to 64
>ehci_hcd 0000:00:0a.1: EHCI Host Controller
>ehci_hcd 0000:00:0a.1: new USB bus registered, assigned bus number 2
>ehci_hcd 0000:00:0a.1: debug port 1
>PCI: cache line size of 64 is not supported by device 0000:00:0a.1
>ehci_hcd 0000:00:0a.1: irq 22, io mem 0xfe02e000
>ehci_hcd 0000:00:0a.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 10 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>sata_nv 0000:00:0d.0: version 3.3
>ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [APSI] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:0d.0 to 64
>ata1: SATA max UDMA/133 cmd 0x00000000000109f0 ctl 0x0000000000010bf2 bmdma 0x000000000001e000 irq 21
>ata2: SATA max UDMA/133 cmd 0x0000000000010970 ctl 0x0000000000010b72 bmdma 0x000000000001e008 irq 21
>scsi0 : sata_nv
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>usb 1-2: new full speed USB device using ohci_hcd and address 2
>ata1.00: ata_hpa_resize 1: sectors = 72303840, hpa_sectors = 72303840
>ata1.00: ATA-7: WDC WD360ADFD-00NLR1, 20.07P20, max UDMA/133
>ata1.00: 72303840 sectors, multi 1: LBA48 NCQ (depth 0/32)
>ata1.00: ata_hpa_resize 1: sectors = 72303840, hpa_sectors = 72303840
>ata1.00: configured for UDMA/133
>scsi1 : sata_nv
>usb 1-2: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /class/input/input2
>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:0a.0-2
>hiddev96: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:0a.0-2
>ata2: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x0000000000010977
>scsi 0:0:0:0: Direct-Access     ATA      WDC WD360ADFD-00 20.0 PQ: 0 ANSI: 5
>SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 72303840 512-byte hdwr sectors (37020 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0d.1[B] -> Link [APSJ] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0d.1 to 64
>ata3: SATA max UDMA/133 cmd 0x00000000000109e0 ctl 0x0000000000010be2 bmdma 0x000000000001cc00 irq 20
>ata4: SATA max UDMA/133 cmd 0x0000000000010960 ctl 0x0000000000010b62 bmdma 0x000000000001cc08 irq 20
>scsi2 : sata_nv
>ata3: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x00000000000109e7
>scsi3 : sata_nv
>ata4: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x0000000000010967
>ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
>ACPI: PCI Interrupt 0000:00:0d.2[C] -> Link [ASA2] -> GSI 23 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:0d.2 to 64
>ata5: SATA max UDMA/133 cmd 0x000000000001c800 ctl 0x000000000001c402 bmdma 0x000000000001b800 irq 23
>ata6: SATA max UDMA/133 cmd 0x000000000001c000 ctl 0x000000000001bc02 bmdma 0x000000000001b808 irq 23
>scsi4 : sata_nv
>ata5: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x000000000001c807
>scsi5 : sata_nv
>ata6: SATA link down (SStatus 0 SControl 300)
>ATA: abnormal status 0x7F on port 0x000000000001c007
>pata_amd 0000:00:0c.0: version 0.2.8
>PCI: Setting latency timer of device 0000:00:0c.0 to 64
>ata7: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x000000000001f400 irq 14
>ata8: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x000000000001f408 irq 15
>scsi6 : pata_amd
>ATA: abnormal status 0x7F on port 0x00000000000101f7
>ATA: abnormal status 0x7F on port 0x00000000000101f7
>ata7.01: ATAPI, max UDMA/33
>ata7.01: configured for UDMA/33
>scsi7 : pata_amd
>ata8: port disabled. ignoring.
>scsi 6:0:1:0: CD-ROM            LITE-ON  DVDRW SOHW-832S  VS0M PQ: 0 ANSI: 5
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: dm-0: orphan cleanup on readonly fs
>ext3_orphan_cleanup: deleting unreferenced inode 1638459
>ext3_orphan_cleanup: deleting unreferenced inode 1638458
>ext3_orphan_cleanup: deleting unreferenced inode 1638457
>ext3_orphan_cleanup: deleting unreferenced inode 1638456
>ext3_orphan_cleanup: deleting unreferenced inode 1638453
>EXT3-fs: dm-0: 5 orphan inodes deleted
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
>security:  60 classes, 65645 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1181081381.191:2): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 6:0:1:0: Attached scsi generic sg1 type 5
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>shpchp: HPC vendor_id 1033 device_id 125 ss_vid 0 ss_did 0
>shpchp: Can't get msi for the hotplug controller
>shpchp: Use INTx for the hotplug controller
>shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
>sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 6:0:1:0: Attached scsi CD-ROM sr0
>i2c_adapter i2c-0: nForce2 SMBus adapter at 0x1c00
>i2c_adapter i2c-1: nForce2 SMBus adapter at 0x1c40
>forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.60.
>ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [APCH] -> GSI 22 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:00:10.0 to 64
>forcedeth: using HIGHDMA
>EDAC MC: Ver: 2.0.1 May 23 2007
>nvidia: module license 'NVIDIA' taints kernel.
>input: PC Speaker as /class/input/input3
>eth0: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:10.0
>ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 21
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [AMC1] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:00:11.0 to 64
>forcedeth: using HIGHDMA
>eth1: forcedeth.c: subsystem: 01043:81fb bound to 0000:00:11.0
>ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
>ACPI: PCI Interrupt 0000:02:0b.0[A] -> Link [APC4] -> GSI 19 (level, low) -> IRQ 19
>fw_ohci: Added fw-ohci device 0000:02:0b.0, OHCI version 1.10
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 20
>ACPI: PCI Interrupt 0000:00:0e.1[B] -> Link [AAZA] -> GSI 20 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:0e.1 to 64
>ACPI: PCI Interrupt Link [APC5] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [APC5] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>NVRM: loading NVIDIA UNIX x86_64 Kernel Module  100.14.06  Thu May  3 15:42:37 PDT 2007
>ACPI: PCI Interrupt Link [APC8] enabled at IRQ 16
>ACPI: PCI Interrupt 0000:0a:0e.0[A] -> Link [APC8] -> GSI 16 (level, low) -> IRQ 16
>ARECA RAID ADAPTER8: FIRMWARE VERSION V1.42 2006-10-13 
>scsi8 : Areca SATA Host Adapter RAID Controller( RAID6 capable)
>        Driver Version 1.20.00.13
>scsi 8:0:0:0: Direct-Access     Areca    ARC-1220-VOL#00  R001 PQ: 0 ANSI: 5
>scsi 8:0:16:0: Processor         Areca    RAID controller  R001 PQ: 0 ANSI: 0
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 4374999552 512-byte hdwr sectors (2240000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: cb 00 00 08
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>sdb : very big device. try to use READ CAPACITY(16).
>SCSI device sdb: 4374999552 512-byte hdwr sectors (2240000 MB)
>sdb: Write Protect is off
>sdb: Mode Sense: cb 00 00 08
>SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sdb: sdb1 sdb2
>sd 8:0:0:0: Attached scsi disk sdb
>sd 8:0:0:0: Attached scsi generic sg2 type 0
>scsi 8:0:16:0: Attached scsi generic sg3 type 3
>fw_core: created new fw device fw0 (0 config rom retries)
>loop: loaded (max 8 devices)
>lp: driver loaded but no devices found
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Tainted: P      )
>
>Call Trace:
> [<ffffffff80229e7b>] local_bh_enable+0x42/0x98
> [<ffffffff8025c008>] cond_resched_softirq+0x35/0x4b
> [<ffffffff8022e9f5>] release_sock+0x59/0xaa
> [<ffffffff802252a6>] tcp_sendmsg+0x9ae/0xab8
> [<ffffffff8024297c>] sock_aio_write+0x110/0x128
> [<ffffffff802167c3>] do_sync_write+0xc9/0x10c
> [<ffffffff8030ee3d>] file_has_perm+0x94/0xa3
> [<ffffffff80293107>] autoremove_wake_function+0x0/0x2e
> [<ffffffff802150ba>] vfs_write+0xe1/0x177
> [<ffffffff80215a74>] sys_write+0x45/0x6e
> [<ffffffff8025711e>] system_call+0x7e/0x83
>
>No dock devices found.
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sda1, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on sdb1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev sdb1, type ext3), uses xattr
>SGI XFS with ACLs, security attributes, large block/inode numbers, no debug enabled
>SGI XFS Quota Management subsystem
>XFS mounting filesystem sdb2
>Starting XFS recovery on filesystem: sdb2 (logdev: internal)
>Ending XFS recovery on filesystem: sdb2 (logdev: internal)
>SELinux: initialized (dev sdb2, type xfs), uses xattr
>Adding 2031608k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:2031608k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>PPP generic driver version 2.4.2
>eth0: no IPv6 routers present
>audit(1181052610.442:3): avc:  denied  { use } for  pid=2285 comm="fetchmail" name="null" dev=tmpfs ino=1861 scontext=system_u:system_r:fetchmail_t:s0 tcontext=system_u:system_r:pppd_t:s0 tclass=fd
>u32 classifier
>    Performance counters on
>    input device check on 
>    Actions configured 
>eth1: no IPv6 routers present
>audit(1181052613.624:4): audit_pid=2362 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>it87: Found IT8716F chip at 0x290, revision 0
>it87: in3 is VCC (+5V)
>it87: in7 is VCCH (+5V Stand-By)
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts

Actions: View

Attachments on bug 242711: 156227 | 156229 | 157703 | 157704