Attachment 156229 Details for Bug 242711 – lspci -vv

lspci -vv

lspci (text/plain), 36.82 KB, created by Daniel Rowe on 2007-06-05 14:37:57 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Daniel Rowe

Created: 2007-06-05 14:37:57 UTC

Size: 36.82 KB

patch

obsolete

>00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=0 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=3 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
>		Link Config 1: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 1.0GHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 600MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] HyperTransport: MSI Mapping
>
>00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:00.4 RAM memory: nVidia Corporation C51 Memory Controller 4 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:00.5 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] #00 [0000]
>
>00:00.6 RAM memory: nVidia Corporation C51 Memory Controller 3 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:00.7 RAM memory: nVidia Corporation C51 Memory Controller 2 (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fc
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:04.0 PCI bridge: nVidia Corporation C51 PCI Express Bridge (rev a1) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: fa000000-fcffffff
>	Prefetchable memory behind bridge: 00000000e0000000-00000000efffffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:08.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
>	Subsystem: nVidia Corporation Unknown device cb84
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Capabilities: [44] HyperTransport: Slave or Primary Interface
>		Command: BaseUnitID=8 UnitCnt=15 MastHost- DefDir- DUL-
>		Link Control 0: CFlE+ CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0 IsocEn+ LSEn+ ExtCTL- 64b-
>		Link Config 0: MLWI=16bit DwFcIn- MLWO=16bit DwFcOut- LWI=16bit DwFcInEn- LWO=16bit DwFcOutEn-
>		Link Control 1: CFlE- CST- CFE- <LkFail+ Init- EOC+ TXO+ <CRCErr=0 IsocEn- LSEn- ExtCTL- 64b-
>		Link Config 1: MLWI=8bit DwFcIn- MLWO=8bit DwFcOut- LWI=8bit DwFcInEn- LWO=8bit DwFcOutEn-
>		Revision ID: 1.03
>		Link Frequency 0: 600MHz
>		Link Error 0: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 0: 200MHz+ 300MHz+ 400MHz+ 500MHz+ 600MHz+ 800MHz+ 1.0GHz+ 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Feature Capability: IsocFC+ LDTSTOP+ CRCTM- ECTLT- 64bA- UIDRD-
>		Link Frequency 1: 200MHz
>		Link Error 1: <Prot- <Ovfl- <EOC- CTLTm-
>		Link Frequency Capability 1: 200MHz- 300MHz- 400MHz- 500MHz- 600MHz- 800MHz- 1.0GHz- 1.2GHz- 1.4GHz- 1.6GHz- Vend-
>		Error Handling: PFlE+ OFlE+ PFE- OFE- EOCFE- RFE- CRCFE- SERRFE- CF- RE- PNFE- ONFE- EOCNFE- RNFE- CRCNFE- SERRNFE-
>		Prefetchable memory behind bridge Upper: 00-00
>		Bus Number: 00
>	Capabilities: [e0] #00 [fee0]
>
>00:09.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>
>00:09.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Interrupt: pin A routed to IRQ 255
>	Region 4: I/O ports at 1c00 [size=64]
>	Region 5: I/O ports at 1c40 [size=64]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:09.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:0a.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 23
>	Region 0: Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0a.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2) (prog-if 20 [EHCI])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin B routed to IRQ 22
>	Region 0: Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
>	Capabilities: [44] Debug port
>	Capabilities: [80] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>00:0c.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1) (prog-if 8a [Master SecP PriP])
>	Subsystem: Unknown device f043:81fb
>	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	Region 4: I/O ports at f400 [size=16]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>
>00:0d.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin A routed to IRQ 21
>	Region 0: I/O ports at 09f0 [size=8]
>	Region 1: I/O ports at 0bf0 [size=4]
>	Region 2: I/O ports at 0970 [size=8]
>	Region 3: I/O ports at 0b70 [size=4]
>	Region 4: I/O ports at e000 [size=16]
>	Region 5: Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [cc] HyperTransport: MSI Mapping
>
>00:0d.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin B routed to IRQ 20
>	Region 0: I/O ports at 09e0 [size=8]
>	Region 1: I/O ports at 0be0 [size=4]
>	Region 2: I/O ports at 0960 [size=8]
>	Region 3: I/O ports at 0b60 [size=4]
>	Region 4: I/O ports at cc00 [size=16]
>	Region 5: Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [cc] HyperTransport: MSI Mapping
>
>00:0d.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (750ns min, 250ns max)
>	Interrupt: pin C routed to IRQ 23
>	Region 0: I/O ports at c800 [size=8]
>	Region 1: I/O ports at c400 [size=4]
>	Region 2: I/O ports at c000 [size=8]
>	Region 3: I/O ports at bc00 [size=4]
>	Region 4: I/O ports at b800 [size=16]
>	Region 5: Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [cc] HyperTransport: MSI Mapping
>
>00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2) (prog-if 01 [Subtractive decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
>	Memory behind bridge: fdf00000-fdffffff
>	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb84
>	Capabilities: [8c] HyperTransport: MSI Mapping
>
>00:0e.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81f6
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (500ns min, 1250ns max)
>	Interrupt: pin B routed to IRQ 20
>	Region 0: Memory at fe020000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>		Masking: 00000000  Pending: 00000000
>	Capabilities: [6c] HyperTransport: MSI Mapping
>
>00:10.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (250ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 22
>	Region 0: Memory at fe02a000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at b400 [size=8]
>	Region 2: Memory at fe029000 (32-bit, non-prefetchable) [size=256]
>	Region 3: Memory at fe028000 (32-bit, non-prefetchable) [size=16]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>	Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>		Vector table: BAR=2 offset=00000000
>		PBA: BAR=3 offset=00000000
>	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
>		Address: 0000000000000000  Data: 0000
>		Masking: 00000000  Pending: 00000000
>	Capabilities: [6c] HyperTransport: MSI Mapping
>
>00:11.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
>	Subsystem: ASUSTeK Computer Inc. Unknown device 81fb
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0 (250ns min, 5000ns max)
>	Interrupt: pin A routed to IRQ 21
>	Region 0: Memory at fe027000 (32-bit, non-prefetchable) [size=4K]
>	Region 1: I/O ports at b000 [size=8]
>	Region 2: Memory at fe026000 (32-bit, non-prefetchable) [size=256]
>	Region 3: Memory at fe025000 (32-bit, non-prefetchable) [size=16]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable+ DSel=0 DScale=0 PME-
>	Capabilities: [70] MSI-X: Enable- Mask- TabSize=8
>		Vector table: BAR=2 offset=00000000
>		PBA: BAR=3 offset=00000000
>	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable-
>		Address: 0000000000000000  Data: 0000
>		Masking: 00000000  Pending: 00000000
>	Capabilities: [6c] HyperTransport: MSI Mapping
>
>00:12.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=03, subordinate=05, sec-latency=0
>	Memory behind bridge: fde00000-fdefffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 5
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:14.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:15.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=07, subordinate=07, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:16.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=08, subordinate=08, sec-latency=0
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x1
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:17.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=00, secondary=09, subordinate=0b, sec-latency=0
>	Memory behind bridge: fdd00000-fddfffff
>	Prefetchable memory behind bridge: 00000000fd800000-00000000fdbfffff
>	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
>	Capabilities: [48] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [60] HyperTransport: MSI Mapping
>	Capabilities: [80] Express Root Port (Slot+) IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <512ns, L1 <4us
>		Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>		Link: Latency L0s <512ns, L1 <4us
>		Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>		Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug- Surpise-
>		Slot: Number 0, PowerLimit 0.000000
>		Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
>		Slot: AttnInd Off, PwrInd On, Power-
>		Root: Correctable- Non-Fatal- Fatal- PME-
>
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>		!!! Possibly incomplete decoding
>		Command: WarmRst+ DblEnd-
>		Link Control: CFlE- CST- CFE- <LkFail- Init+ EOC- TXO- <CRCErr=0
>		Link Config: MLWI=16bit MLWO=16bit LWI=16bit LWO=16bit
>		Revision ID: 1.02
>
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Capabilities: [f0] #0f [0010]
>
>01:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GS] (rev a1) (prog-if 00 [VGA])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fa000000 (32-bit, non-prefetchable) [size=16M]
>	Region 1: Memory at e0000000 (64-bit, prefetchable) [size=256M]
>	Region 3: Memory at fb000000 (64-bit, non-prefetchable) [size=16M]
>	Region 5: I/O ports at ac00 [size=128]
>	[virtual] Expansion ROM at fcfe0000 [disabled] [size=128K]
>	Capabilities: [60] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [78] Express Endpoint IRQ 0
>		Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <256ns, L1 <4us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x16, ASPM L0s L1, Port 0
>		Link: Latency L0s <256ns, L1 <4us
>		Link: ASPM Disabled RCB 128 bytes CommClk+ ExtSynch-
>		Link: Speed 2.5Gb/s, Width x16
>
>02:0b.0 FireWire (IEEE 1394): Texas Instruments TSB43AB22/A IEEE-1394a-2000 Controller (PHY/Link) (prog-if 10 [OHCI])
>	Subsystem: ASUSTeK Computer Inc. P5W DH Deluxe Motherboard
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 32 (500ns min, 1000ns max), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 19
>	Region 0: Memory at fdfff000 (32-bit, non-prefetchable) [size=2K]
>	Region 1: Memory at fdff8000 (32-bit, non-prefetchable) [size=16K]
>	Capabilities: [44] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME+
>
>03:00.0 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=03, secondary=04, subordinate=04, sec-latency=32
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0
>		Link: Latency L0s <4us, L1 <16us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [54] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>		Status: Dev=03:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=32 CommitmentLimit=32
>		Downstream: Capacity=16 CommitmentLimit=16
>	Capabilities: [64] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>
>03:00.1 PCI bridge: NEC Corporation uPD720400 PCI Express - PCI/PCI-X Bridge (rev 06) (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Region 0: Memory at fdeff000 (64-bit, non-prefetchable) [size=128]
>	Bus: primary=03, secondary=05, subordinate=05, sec-latency=32
>	Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [40] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s L1, Port 0
>		Link: Latency L0s <4us, L1 <16us
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x4
>	Capabilities: [54] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=conv
>		Status: Dev=03:00.1 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=32 CommitmentLimit=32
>		Downstream: Capacity=16 CommitmentLimit=16
>	Capabilities: [64] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=55mA PME(D0+,D1+,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>		Bridge: PM- B3+
>	Capabilities: [6c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [7c] #0c [0009]
>
>09:00.0 PCI bridge: Intel Corporation 80333 Segment-A PCI Express-to-PCI Express Bridge (prog-if 00 [Normal decode])
>	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=09, secondary=0a, subordinate=0a, sec-latency=32
>	Memory behind bridge: fdd00000-fddfffff
>	Prefetchable memory behind bridge: 00000000fd800000-00000000fdbfffff
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 256 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d8] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>		Status: Dev=09:00.0 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>
>09:00.2 PCI bridge: Intel Corporation 80333 Segment-B PCI Express-to-PCI Express Bridge (prog-if 00 [Normal decode])
>	Control: I/O- Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
>	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
>	Latency: 0, Cache Line Size: 32 bytes
>	Bus: primary=09, secondary=0b, subordinate=0b, sec-latency=32
>	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
>	BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
>	Capabilities: [44] Express PCI/PCI-X Bridge IRQ 0
>		Device: Supported: MaxPayload 256 bytes, PhantFunc 0, ExtTag-
>		Device: Latency L0s <64ns, L1 <1us
>		Device: AtnBtn- AtnInd- PwrInd-
>		Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
>		Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
>		Device: MaxPayload 128 bytes, MaxReadReq 512 bytes
>		Link: Supported Speed 2.5Gb/s, Width x8, ASPM L0s, Port 0
>		Link: Latency L0s unlimited, L1 unlimited
>		Link: ASPM Disabled CommClk- ExtSynch-
>		Link: Speed 2.5Gb/s, Width x8
>	Capabilities: [5c] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [6c] Power Management version 2
>		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d8] PCI-X bridge device
>		Secondary Status: 64bit+ 133MHz+ SCD- USC- SCO- SRD- Freq=133MHz
>		Status: Dev=09:00.2 64bit- 133MHz- SCD- USC- SCO- SRD-
>		Upstream: Capacity=65535 CommitmentLimit=65535
>		Downstream: Capacity=65535 CommitmentLimit=65535
>
>0a:0e.0 RAID bus controller: Areca Technology Corp. ARC-1220 8-Port PCI-Express to SATA RAID Controller
>	Subsystem: Areca Technology Corp. ARC-1220 8-Port PCI-Express to SATA RAID Controller
>	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr+ Stepping+ SERR- FastB2B-
>	Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
>	Latency: 32 (32000ns min), Cache Line Size: 32 bytes
>	Interrupt: pin A routed to IRQ 16
>	Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=4K]
>	Region 2: Memory at fd800000 (32-bit, prefetchable) [size=4M]
>	Expansion ROM at fdde0000 [disabled] [size=64K]
>	Capabilities: [c0] Power Management version 2
>		Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
>		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
>	Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable-
>		Address: 0000000000000000  Data: 0000
>	Capabilities: [e0] PCI-X non-bridge device
>		Command: DPERE+ ERO- RBC=1024 OST=8
>		Status: Dev=0a:0e.0 64bit+ 133MHz+ SCD- USC- DC=bridge DMMRBC=1024 DMOST=4 DMCRS=32 RSCEM- 266MHz- 533MHz-
>

Actions: View

Attachments on bug 242711: 156227 | 156229 | 157703 | 157704