Attachment 156249 Details for Bug 242338 – output of dmesg after boot

output of dmesg after boot

dmesg20070605 (text/plain), 13.30 KB, created by Klaus-Peter Schrage on 2007-06-05 17:51:06 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Klaus-Peter Schrage

Created: 2007-06-05 17:51:06 UTC

Size: 13.30 KB

patch

obsolete

>Using PowerMac machine description
>Total memory = 1024MB; using 2048kB for hash table (at cfe00000)
>Linux version 2.6.21-1.3212.fc7 (kojibuilder@ppc3.fedora.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 Fri Jun 1 21:07:10 EDT 2007
>Found initrd at 0xc1a00000:0xc1d56000
>Found UniNorth memory controller & host bridge @ 0xf8000000 revision: 0xd2
>Mapped at 0xfdfc0000
>Found a Intrepid mac-io controller, rev: 0, mapped at 0xfdf40000
>Processor NAP mode on idle enabled.
>PowerMac motherboard: iBook G4
>via-pmu: Server Mode is disabled
>PMU driver v2 initialized for Core99, firmware: 0c
>Entering add_active_range(0, 0, 262144) 0 entries of 256 used
>Found UniNorth PCI host bridge at 0x00000000f0000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0x00000000f2000000. Firmware bus number: 0->0
>Found UniNorth PCI host bridge at 0x00000000f4000000. Firmware bus number: 0->0
>nvram: Checking bank 0...
>nvram: gen0=158, gen1=159
>nvram: Active bank is: 1
>nvram: OF partition at 0x410
>nvram: XP partition at 0x1020
>nvram: NR partition at 0x1120
>Top of RAM: 0x40000000, Total RAM: 0x40000000
>Memory hole size: 0MB
>Zone PFN ranges:
>  DMA             0 ->   196608
>  Normal     196608 ->   196608
>  HighMem    196608 ->   262144
>early_node_map[1] active PFN ranges
>    0:        0 ->   262144
>On node 0 totalpages: 262144
>  DMA zone: 1536 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 195072 pages, LIFO batch:31
>  Normal zone: 0 pages used for memmap
>  HighMem zone: 512 pages used for memmap
>  HighMem zone: 65024 pages, LIFO batch:15
>Built 1 zonelists.  Total pages: 260096
>Kernel command line: ro rhgb quiet root=LABEL=/1 
>mpic: Setting up MPIC " MPIC 1   " version 1.2 at 80040000, max 4 CPUs
>mpic: ISU size: 64, shift: 6, mask: 3f
>mpic: Initializing for 64 sources
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>GMT Delta read from XPRAM: 0 minutes, DST: off
>time_init: decrementer frequency = 18.432000 MHz
>time_init: processor frequency   = 1333.333330 MHz
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>High memory: 262144k
>Memory: 1028432k/1048576k available (3884k kernel code, 281428k reserved, 144k data, 338k bss, 208k init)
>Calibrating delay loop... 36.73 BogoMIPS (lpj=18368)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>device-tree: Duplicate name in /cpus/PowerPC,G4@0, renamed to "l2-cache#1"
>NET: Registered protocol family 16
>KeyWest i2c @0xf8001003 irq 42 /uni-n@f8000000/i2c@f8001000
> channel 1 bus /uni-n@f8000000/i2c@f8001000/i2c-bus@1
>KeyWest i2c @0x80018000 irq 26 /pci@f2000000/mac-io@17/i2c@18000
> channel 0 bus /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0
>PMU i2c /pci@f2000000/mac-io@17/via-pmu@16000/pmu-i2c
> channel 1 bus <multibus>
> channel 2 bus <multibus>
>PCI: Probing PCI hardware
>PCI: Cannot allocate resource region 0 of device 0001:10:18.0
>PCI: Cannot allocate resource region 0 of device 0001:10:19.0
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>mpc52xx-bestcomm: could not locate DMA controller
>DMA: MPC52xx BestComm init FAILED !!!
>Linux Plug and Play Support v0.97 (c) Adam Belay
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3416k freed
>Thermal assist unit not available
>Registering PowerMac CPU frequency driver
>Low: 666 Mhz, High: 1333 Mhz, Boot: 666 Mhz
>audit: initializing netlink socket (disabled)
>audit(1181064001.843:1): initialized
>highmem bounce pool size: 64 pages
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Enabling device 0000:00:10.0 (0006 -> 0007)
>radeonfb (0000:00:10.0): Invalid ROM signature 0 should be 0xaa55
>radeonfb: Retrieved PLL infos from Open Firmware
>radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=183.00 Mhz, System=210.00 MHz
>radeonfb: PLL min 12000 max 35000
>i2c_adapter i2c-2: unable to read EDID block.
>i2c_adapter i2c-2: unable to read EDID block.
>i2c_adapter i2c-2: unable to read EDID block.
>radeonfb: Monitor 1 type LCD found
>radeonfb: EDID probed
>radeonfb: Monitor 2 type no found
>radeonfb: Using Firmware dividers 0x00020074 from PPLL 0
>radeonfb: Dynamic Clock Power Management enabled
>Console: switching to colour frame buffer device 128x48
>radeonfb: Backlight initialized (radeonbl0)
>radeonfb (0000:00:10.0): ATI Radeon NV 
>Generic RTC Driver v1.07
>Macintosh non-volatile memory driver v1.1
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected Apple UniNorth 2 chipset
>agpgart: configuring for size idx: 8
>agpgart: AGP aperture is 32M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>Serial: MPC52xx PSC UART driver
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>MacIO PCI driver attached to Intrepid chipset
>input: Macintosh mouse button emulation as /class/input/input0
>apm_emu: APM Emulation 0.5 initialized.
>adb: starting probe task...
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>PCI: Enabling device 0002:20:0d.0 (0000 -> 0002)
>adb devices: [2]: 2 c4 [7]: 7 1f
>ADB keyboard at 2, handler 1
>Detected ADB keyboard, type ISO, swapping keys.
>input: ADB keyboard as /class/input/input1
>input: ADB Powerbook buttons as /class/input/input2
>adb: finished probe task...
>ide0: Found Apple UniNorth ATA-6 controller, bus ID 3, irq 39
>Probing IDE interface ide0...
>hda: TOSHIBA MK6025GAS, ATA DISK drive
>hda: Enabling Ultra DMA 5
>ide0 at 0xf102a000-0xf102a007,0xf102a160 on irq 39
>ide1: Found Apple KeyLargo ATA-3 controller, bus ID 0, irq 24
>Probing IDE interface ide1...
>hdc: MATSHITACD-RW CW-8124, ATAPI CD/DVD-ROM drive
>hdc: Enabling MultiWord DMA 2
>ide1 at 0xf1014000-0xf1014007,0xf1014160 on irq 24
>hda: max request size: 512KiB
>hda: 117210240 sectors (60011 MB), CHS=16383/255/63, UDMA(100)
>hda: cache flushes supported
> hda: [mac] hda1 hda2 hda3 hda4 hda5 hda6 hda7
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>mice: PS/2 mouse device common for all mice
>PowerMac i2c bus pmu 2 registered
>PowerMac i2c bus pmu 1 registered
>PowerMac i2c bus mac-io 0 registered
>PowerMac i2c bus uni-n 1 registered
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>input: PMU as /class/input/input3
>Registered led device: pmu-front-led
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 208k init
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>Apple USB OHCI 0001:10:18.0 disabled by firmware
>Apple USB OHCI 0001:10:19.0 disabled by firmware
>PCI: Enabling device 0001:10:1a.0 (0000 -> 0002)
>ohci_hcd 0001:10:1a.0: OHCI Host Controller
>ohci_hcd 0001:10:1a.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0001:10:1a.0: irq 29, io mem 0x80083000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>PCI: Enabling device 0001:10:1b.0 (0000 -> 0002)
>ohci_hcd 0001:10:1b.0: OHCI Host Controller
>ohci_hcd 0001:10:1b.0: new USB bus registered, assigned bus number 2
>ohci_hcd 0001:10:1b.0: irq 63, io mem 0x80082000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>PCI: Enabling device 0001:10:1b.1 (0000 -> 0002)
>ohci_hcd 0001:10:1b.1: OHCI Host Controller
>ohci_hcd 0001:10:1b.1: new USB bus registered, assigned bus number 3
>ohci_hcd 0001:10:1b.1: irq 63, io mem 0x80081000
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-1: new full speed USB device using ohci_hcd and address 2
>PCI: Enabling device 0001:10:1b.2 (0004 -> 0006)
>ehci_hcd 0001:10:1b.2: EHCI Host Controller
>ehci_hcd 0001:10:1b.2: new USB bus registered, assigned bus number 4
>ehci_hcd 0001:10:1b.2: irq 63, io mem 0x80080000
>ehci_hcd 0001:10:1b.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 5 ports detected
>usb 1-1: configuration #1 chosen from 1 choice
>input: HID 05ac:1000 as /class/input/input4
>input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0001:10:1a.0-1
>input: HID 05ac:1000 as /class/input/input5
>input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0001:10:1a.0-1
>usb 1-2: new full speed USB device using ohci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1181064011.278:2): selinux=0 auid=4294967295
>sungem.c:v0.98 8/24/03 David S. Miller (davem@redhat.com)
>PHY ID: 4061e4, addr: 0
>eth0: Sun GEM (PCI) 10/100/1000BaseT Ethernet 00:14:51:30:83:c0 
>eth0: Found BCM5221 PHY
>pmac_zilog: 0.6 (Benjamin Herrenschmidt <benh@kernel.crashing.org>)
>ttyPZ0 at MMIO 0x80013020 (irq = 22) is a Z85c30 ESCC - Serial port
>ttyPZ1 at MMIO 0x80013000 (irq = 23) is a Z85c30 ESCC - Serial port
>PCI: Enabling device 0002:20:0e.0 (0000 -> 0002)
>fw_ohci: Added fw-ohci device 0002:20:0e.0, OHCI version 1.10
>fw_core: created new fw device fw0 (0 config rom retries)
>input: appletouch as /class/input/input6
>usbcore: registered new interface driver appletouch
>snd-powermac no longer handles any machines with a layout-id property in the device-tree, use snd-aoa.
>snd-aoa-fabric-layout: found bus with layout 80
>snd-aoa-fabric-layout: Using PMF GPIOs
>snd-aoa-codec-tas: found tas3004
>snd-aoa-fabric-layout: can use this codec
>hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, (U)DMA
>Uniform CD-ROM driver Revision: 3.20
>snd-aoa-codec-tas: tas found, addr 0x35 on /pci@f2000000/mac-io@17/i2c@18000/i2c-bus@0/codec@6a
>loop: loaded (max 8 devices)
>lp: driver loaded but no devices found
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>------------[ cut here ]------------
>Badness at kernel/softirq.c:144
>Call Trace:
>[CFC81BD0] [C0008AB0] show_stack+0x50/0x184 (unreliable)
>[CFC81BF0] [C012071C] report_bug+0x84/0xc8
>[CFC81C00] [C02B1A1C] __kprobes_text_start+0x154/0x538
>[CFC81C50] [C0013280] ret_from_except_full+0x0/0x4c
>--- Exception: 700 at local_bh_enable+0x2c/0x7c
>    LR = cond_resched_softirq+0x58/0x80
>[CFC81D10] [22002428] 0x22002428 (unreliable)
>[CFC81D20] [C02B0334] cond_resched_softirq+0x58/0x80
>[CFC81D30] [C0231D20] release_sock+0x54/0xac
>[CFC81D50] [C0269B10] tcp_sendmsg+0xac0/0xbf8
>[CFC81DB0] [C028665C] inet_sendmsg+0x60/0x74
>[CFC81DD0] [C022ED58] sock_aio_write+0x114/0x130
>[CFC81E30] [C008FF28] do_sync_write+0xb8/0x10c
>[CFC81EF0] [C0090B00] vfs_write+0x104/0x1c8
>[CFC81F10] [C009119C] sys_write+0x4c/0x8c
>[CFC81F40] [C0012C24] ret_from_syscall+0x0/0x38
>--- Exception: c01 at 0xf46d098
>    LR = 0xf1bba28
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on hda6, internal journal
>Adding 1048568k swap on /dev/hda5.  Priority:-1 extents:1 across:1048568k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1181064054.883:3): audit_pid=1462 old=0 by auid=4294967295
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SCSI subsystem initialized
>ieee80211_crypt: registered algorithm 'NULL'
>ieee80211: 802.11 data/management/control stack, git-1.1.13
>ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
>bcm43xx driver
>PCI: Enabling device 0001:10:12.0 (0004 -> 0006)
>bcm43xx: Chip ID 0x4318, rev 0x2
>bcm43xx: Number of cores: 4
>bcm43xx: Core 0: ID 0x800, rev 0xd, vendor 0x4243
>bcm43xx: Core 1: ID 0x812, rev 0x9, vendor 0x4243
>bcm43xx: Core 2: ID 0x804, rev 0xc, vendor 0x4243
>bcm43xx: Core 3: ID 0x80d, rev 0x7, vendor 0x4243
>bcm43xx: PHY connected
>bcm43xx: Detected PHY: Analog: 3, Type 2, Revision 7
>bcm43xx: Detected Radio: ID: 8205017f (Manuf: 17f Ver: 2050 Rev: 8)
>bcm43xx: Radio turned off
>bcm43xx: Radio turned off

Actions: View

Attachments on bug 242338: 156022 | 156249 | 157481