Attachment 156269 Details for Bug 242638 – dmesg log when dongle present during boot

dmesg log when dongle present during boot

dmesg.log (text/plain), 20.78 KB, created by Caolan McNamara on 2007-06-05 19:43:52 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Caolan McNamara

Created: 2007-06-05 19:43:52 UTC

Size: 20.78 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 00000000000a0000 end: 00000000000a0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001fd74000 end: 000000001fe74000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001fe74000 size: 0000000000002000 end: 000000001fe76000 type: 4
>copy_e820_map() start: 000000001fe76000 size: 0000000000021000 end: 000000001fe97000 type: 3
>copy_e820_map() start: 000000001fe97000 size: 0000000000069000 end: 000000001ff00000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000010000 end: 00000000fee10000 type: 2
>copy_e820_map() start: 00000000ffb00000 size: 0000000000500000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001fe74000 (usable)
> BIOS-e820: 000000001fe74000 - 000000001fe76000 (ACPI NVS)
> BIOS-e820: 000000001fe76000 - 000000001fe97000 (ACPI data)
> BIOS-e820: 000000001fe97000 - 000000001ff00000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved)
> BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>510MB LOWMEM available.
>found SMP MP-table at 000fe710
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 130676) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   130676
>  HighMem    130676 ->   130676
>early_node_map[1] active PFN ranges
>    0:        0 ->   130676
>On node 0 totalpages: 130676
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 988 pages used for memmap
>  Normal zone: 125592 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP 000FEB80, 0014 (r0 DELL  )
>ACPI: RSDT 000FD2EA, 0034 (r1 DELL    2400           7 ASL        61)
>ACPI: FACP 000FD31E, 0074 (r1 DELL    2400           7 ASL        61)
>ACPI: DSDT FFFCBE22, 2404 (r1   DELL    dt_ex     1000 MSFT  100000D)
>ACPI: FACS 1FE74000, 0040
>ACPI: SSDT FFFCE363, 00BA (r1   DELL    st_ex     1000 MSFT  100000D)
>ACPI: APIC 000FD392, 006C (r1 DELL    2400           7 ASL        61)
>ACPI: BOOT 000FD3FE, 0028 (r1 DELL    2400           7 ASL        61)
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
>Processor #0 15:2 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] disabled)
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] disabled)
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 20000000 (gap: 1ff00000:ded00000)
>Built 1 zonelists.  Total pages: 129656
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Detected 2392.333 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 509848k/522704k available (2066k kernel code, 12284k reserved, 1092k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xe0800000 - 0xff7fe000   ( 495 MB)
>    lowmem  : 0xc0000000 - 0xdfe74000   ( 510 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 4786.98 BogoMIPS (lpj=2393494)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
>CPU: Trace cache: 12K uops, L1 D cache: 8K
>CPU: L2 cache: 512K
>CPU: Hyper-Threading is disabled
>CPU: After all inits, caps: bfebf3ff 00000000 00000000 00003080 00004400 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (12) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 14k freed
>ACPI: Core revision 20070126
>CPU0: Intel(R) Pentium(R) 4 CPU 2.40GHz stepping 09
>Total of 1 processors activated (4786.98 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>Time: 19:39:40  Date: 05/05/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfbc7f, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S1 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>* The chipset may have PM-Timer Bug. Due to workarounds for a bug,
>* this clock source is slow. If you are sure your timer does not have
>* this bug, please use "acpi_pm_good" to disable the workaround
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0880-08bf claimed by ICH4 GPIO
>Boot video device is 0000:01:04.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *9 10 11 12 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 10 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>Time: tsc clocksource has been installed.
>pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
>pnp: 00:00: iomem range 0x100000-0xffffff could not be reserved
>pnp: 00:00: iomem range 0x1000000-0x1fe73fff could not be reserved
>pnp: 00:00: iomem range 0xc0000-0xfffff could not be reserved
>pnp: 00:09: ioport range 0x800-0x85f has been reserved
>pnp: 00:09: ioport range 0xc00-0xc7f has been reserved
>pnp: 00:09: ioport range 0x860-0x8ff could not be reserved
>PCI: Bridge: 0000:00:1e.0
>  IO window: d000-dfff
>  MEM window: fe900000-feafffff
>  PREFETCH window: e0000000-efffffff
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 5, 196608 bytes)
>TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
>TCP: Hash tables configured (established 16384 bind 16384)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 3473k freed
>Simple Boot Flag value 0x87 read from CMOS RAM was invalid
>Simple Boot Flag at 0x7a set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1181072379.349:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor Device is not present [20070126]
>isapnp: Scanning for PnP cards...
>Switched to high resolution mode on CPU 0
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 845G Chipset.
>agpgart: Detected 892K stolen memory.
>agpgart: AGP aperture is 128M @ 0xd0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: No PS/2 controller found. Probing ports directly.
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:522:697
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000ff80
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>usb 1-2: new full speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xffa80800
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 6 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
>scsi0 : ata_piix
>ata1.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728
>ata1.00: ATA-7: Maxtor 6Y120P0, YAR41VW0, max UDMA/133
>ata1.00: 240121728 sectors, multi 8: LBA 
>ata1.00: ata_hpa_resize 1: sectors = 240121728, hpa_sectors = 240121728
>ata1.00: configured for UDMA/33
>scsi1 : ata_piix
>usb 4-5: new high speed USB device using ehci_hcd and address 3
>ata2.00: ATAPI, max UDMA/33
>usb 4-5: configuration #1 chosen from 1 choice
>ata2.00: configured for UDMA/33
>scsi 0:0:0:0: Direct-Access     ATA      Maxtor 6Y120P0   YAR4 PQ: 0 ANSI: 5
>SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 240121728 512-byte hdwr sectors (122942 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2
>sd 0:0:0:0: Attached scsi disk sda
>scsi 1:0:0:0: CD-ROM            HL-DT-ST RW/DVD GCC-4480B C104 PQ: 0 ANSI: 5
>usb 1-2: new full speed USB device using uhci_hcd and address 3
>usb 1-2: configuration #1 chosen from 1 choice
>hub 1-2:1.0: USB hub found
>hub 1-2:1.0: 4 ports detected
>usb 1-2.1: new low speed USB device using uhci_hcd and address 4
>usb 1-2.1: configuration #1 chosen from 1 choice
>input: Chicony USB Gaming Keyboard Pro as /class/input/input1
>input: USB HID v1.11 Keyboard [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-2.1
>input: Chicony USB Gaming Keyboard Pro as /class/input/input2
>input,hiddev96: USB HID v1.11 Device [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-2.1
>input: Chicony USB Gaming Keyboard Pro as /class/input/input3
>input: USB HID v1.11 Gamepad [Chicony USB Gaming Keyboard Pro] on usb-0000:00:1d.0-2.1
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1181072388.348:2): selinux=0 auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 1:0:0:0: Attached scsi generic sg1 type 5
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH4 TCO device (Version=1, TCOBASE=0x0860)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 20
>intel_rng: FWH not detected
>input: PC Speaker as /class/input/input4
>i810_smbus 0000:00:02.0: i810/i815 i2c device found.
>sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 1:0:0:0: Attached scsi CD-ROM sr0
>b44.c:v1.01 (Jun 16, 2006)
>ACPI: PCI Interrupt 0000:01:09.0[A] -> GSI 17 (level, low) -> IRQ 20
>eth0: Broadcom 4400 10/100BaseT Ethernet 00:0b:db:c1:cb:73
>ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1f.5 to 64
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ehci_hcd 0000:00:1d.7: fatal error
>ehci_hcd 0000:00:1d.7: HC died; cleaning up
>usb 4-5: USB disconnect, address 3
>p54usb: reset failed!
>prism54usb: probe of 4-5:1.0 failed with error -108
>usbcore: registered new interface driver prism54usb
>AC'97 0 analog subsections not ready
>intel8x0_measure_ac97_clock: measured 51001 usecs
>intel8x0: clocking to 48000
>usb 3-1: new full speed USB device using uhci_hcd and address 2
>usb 3-1: not running at top speed; connect to a high speed hub
>usb 3-1: configuration #1 chosen from 1 choice
>uhci_hcd 0000:00:1d.2: host system error, PCI problems?
>uhci_hcd 0000:00:1d.2: host controller halted, very bad!
>uhci_hcd 0000:00:1d.2: HC died; cleaning up
>loop: loaded (max 8 devices)
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>p54usb: reset failed!
>prism54usb: probe of 3-1:1.0 failed with error -110
>hub 3-0:1.0: hub_port_status failed (err = -19)
>usb 3-1: USB disconnect, address 2
>BUG: warning at drivers/usb/core/driver.c:1185/usb_autopm_do_device() (Not tainted)
> [<c0569425>] usb_autopm_do_device+0x5c/0xbd
> [<c056493f>] usb_disconnect+0x105/0x123
> [<c0564988>] hub_pre_reset+0x2b/0x53
> [<c05652c7>] hub_thread+0xad/0xa6e
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c056521a>] hub_thread+0x0/0xa6e
> [<c0436da8>] kthread+0xb0/0xd8
> [<c0436cf8>] kthread+0x0/0xd8
> [<c0405b3f>] kernel_thread_helper+0x7/0x10
> =======================
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 16 (level, low) -> IRQ 16
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized radeon 1.25.0 20060524 on minor 0
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
> [<c042b0cf>] local_bh_enable+0x45/0x92
> [<c06002bd>] cond_resched_softirq+0x2c/0x42
> [<c059adf3>] release_sock+0x4f/0x9d
> [<c05c670d>] tcp_sendmsg+0x90b/0x9f9
> [<c04e7350>] copy_to_user+0x3c/0x50
> [<c059f285>] memcpy_toiovec+0x27/0x4a
> [<c059ddb8>] __kfree_skb+0xb5/0x113
> [<c06016f4>] _spin_lock_bh+0x8/0x18
> [<c05dec95>] inet_sendmsg+0x3b/0x45
> [<c0598731>] sock_aio_write+0xf6/0x102
> [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c04e7100>] copy_from_user+0x3a/0x66
> [<c04752a5>] rw_copy_check_uvector+0x5c/0xb0
> [<c0475b33>] do_readv_writev+0xbc/0x187
> [<c059863b>] sock_aio_write+0x0/0x102
> [<c059a7dc>] sock_common_setsockopt+0x1d/0x22
> [<c0475c3b>] vfs_writev+0x3d/0x48
> [<c04760a4>] sys_writev+0x41/0x95
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [VBTN]
>ibm_acpi: ec object not found
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (4083 buckets, 32664 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>b44: eth0: Link is up at 10 Mbps, half duplex.
>b44: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>BUG: warning at drivers/usb/core/driver.c:1185/usb_autopm_do_device() (Not tainted)
> [<c0569425>] usb_autopm_do_device+0x5c/0xbd
> [<c056e921>] usbdev_release+0x88/0xbb
> [<c04765eb>] __fput+0xb4/0x16a
> [<c04740f9>] filp_close+0x51/0x58
> [<c0475028>] sys_close+0x6e/0xa5
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>usb 1-2.4: new full speed USB device using uhci_hcd and address 5
>usb 1-2.4: configuration #1 chosen from 1 choice
>input: Logitech USB Gaming Mouse as /class/input/input7
>input: USB HID v1.11 Mouse [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2.4
>hiddev97: USB HID v1.11 Device [Logitech USB Gaming Mouse] on usb-0000:00:1d.0-2.4
>[drm] Setting GART location based on new memory map
>[drm] Loading R200 Microcode
>[drm] writeback test succeeded in 1 usecs
>eth0: no IPv6 routers present

Actions: View

Attachments on bug 242638: 156269 | 159236 | 159404