Attachment 156289 Details for Bug 242814 – Log from system-config-soundcard

Log from system-config-soundcard

scsconfig.log (text/plain), 59.88 KB, created by Radek Vokál on 2007-06-05 22:19:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Radek Vokál

Created: 2007-06-05 22:19:35 UTC

Size: 59.88 KB

patch

obsolete

>------- System Config Soundcard Log --------
>Tue Jun  5 23:59:10 CEST 2007
>
>------- lspci --------
>00:00.0 Host bridge: Silicon Integrated Systems [SiS] 760/M760 Host (rev 03)
>00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SG86C202
>00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO] (rev 25)
>00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
>00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE]
>00:02.6 Modem: Silicon Integrated Systems [SiS] AC'97 Modem Controller (rev a0)
>00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
>00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
>00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 0f)
>00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
>00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
>00:06.0 CardBus bridge: Texas Instruments PCI1410 PC card Cardbus Controller (rev 02)
>00:0b.0 Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
>01:00.0 VGA compatible controller: Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter
>
>------- lspci -vn --------
>00:00.0 0600: 1039:0760 (rev 03)
>	Flags: bus master, medium devsel, latency 64
>	Memory at e0000000 (32-bit, non-prefetchable) [size=32M]
>	Capabilities: [a0] AGP version 3.0
>	Capabilities: [d0] HyperTransport: Slave or Primary Interface
>	Capabilities: [f0] HyperTransport: Interrupt Discovery and Configuration
>
>00:01.0 0604: 1039:0002
>	Flags: bus master, 66MHz, medium devsel, latency 99
>	Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
>	I/O behind bridge: 0000a000-0000afff
>	Memory behind bridge: e2100000-e21fffff
>	Prefetchable memory behind bridge: e8000000-efffffff
>
>00:02.0 0601: 1039:0963 (rev 25)
>	Flags: bus master, medium devsel, latency 0
>
>00:02.1 0c05: 1039:0016
>	Flags: medium devsel
>	I/O ports at 8100 [size=32]
>
>00:02.5 0101: 1039:5513 (prog-if 80)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 128, IRQ 18
>	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
>	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
>	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
>	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
>	I/O ports at 2000 [size=16]
>
>00:02.6 0703: 1039:7013 (rev a0)
>	Subsystem: 1025:0083
>	Flags: medium devsel, IRQ 17
>	I/O ports at 1000 [size=256]
>	I/O ports at 1c00 [size=128]
>	Capabilities: [48] Power Management version 2
>
>00:02.7 0401: 1039:7012 (rev a0)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 173, IRQ 17
>	I/O ports at 1400 [size=256]
>	I/O ports at 1c80 [size=128]
>	Capabilities: [48] Power Management version 2
>
>00:03.0 0c03: 1039:7001 (rev 0f) (prog-if 10)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 64, IRQ 19
>	Memory at e2002000 (32-bit, non-prefetchable) [size=4K]
>
>00:03.1 0c03: 1039:7001 (rev 0f) (prog-if 10)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 64, IRQ 20
>	Memory at e2003000 (32-bit, non-prefetchable) [size=4K]
>
>00:03.2 0c03: 1039:7002 (prog-if 20)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 64, IRQ 21
>	Memory at e2004000 (32-bit, non-prefetchable) [size=4K]
>	Capabilities: [50] Power Management version 2
>
>00:04.0 0200: 1039:0900 (rev 91)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 173, IRQ 16
>	I/O ports at 1800 [size=256]
>	Memory at e2005000 (32-bit, non-prefetchable) [size=4K]
>	[virtual] Expansion ROM at 38000000 [disabled] [size=128K]
>	Capabilities: [40] Power Management version 2
>
>00:06.0 0607: 104c:ac50 (rev 02)
>	Subsystem: 1025:0083
>	Flags: bus master, medium devsel, latency 168, IRQ 16
>	Memory at 38020000 (32-bit, non-prefetchable) [size=4K]
>	Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
>	Memory window 0: 30000000-33fff000 (prefetchable)
>	Memory window 1: 34000000-37fff000
>	I/O window 0: 00002400-000024ff
>	I/O window 1: 00002800-000028ff
>	16-bit legacy interface ports at 0001
>
>00:0b.0 0280: 14e4:4318 (rev 02)
>	Subsystem: 1468:0312
>	Flags: fast devsel, IRQ 4
>	Memory at e2000000 (32-bit, non-prefetchable) [size=8K]
>
>00:18.0 0600: 1022:1100
>	Flags: fast devsel
>	Capabilities: [80] HyperTransport: Host or Secondary Interface
>
>00:18.1 0600: 1022:1101
>	Flags: fast devsel
>
>00:18.2 0600: 1022:1102
>	Flags: fast devsel
>
>00:18.3 0600: 1022:1103
>	Flags: fast devsel
>
>01:00.0 0300: 1039:6330
>	Subsystem: 1025:0083
>	Flags: 66MHz, medium devsel, IRQ 7
>	BIST result: 00
>	Memory at e8000000 (32-bit, prefetchable) [size=128M]
>	Memory at e2100000 (32-bit, non-prefetchable) [size=128K]
>	I/O ports at a000 [size=128]
>	Capabilities: [40] Power Management version 2
>	Capabilities: [50] AGP version 3.0
>
>------- lsmod --------
>Module                  Size  Used by
>tun                    14913  1 
>nls_utf8                6209  1 
>ipv6                  275969  8 
>autofs4                24261  2 
>ipt_REJECT              8641  1 
>nf_conntrack_ipv4      21709  2 
>xt_state                6593  2 
>nf_conntrack           62409  2 nf_conntrack_ipv4,xt_state
>nfnetlink              10841  2 nf_conntrack_ipv4,nf_conntrack
>xt_tcpudp               7233  4 
>iptable_filter          7105  1 
>ip_tables              16389  1 iptable_filter
>x_tables               18757  4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
>cpufreq_ondemand       12109  1 
>vfat                   16193  3 
>fat                    53469  1 vfat
>dm_mirror              25301  0 
>dm_mod                 58509  1 dm_mirror
>video                  19909  0 
>sbs                    19073  0 
>i2c_ec                  9025  1 sbs
>dock                   13977  0 
>button                 11857  0 
>battery                13893  0 
>asus_acpi              20445  0 
>backlight              10177  1 asus_acpi
>ac                      9157  0 
>parport_pc             30053  0 
>lp                     16265  0 
>parport                38537  2 parport_pc,lp
>sd_mod                 24257  2 
>joydev                 13313  0 
>sis900                 26817  0 
>sg                     37213  0 
>mii                     9409  1 sis900
>snd_intel8x0m          21069  0 
>snd_usb_audio          78913  0 
>i2c_sis96x              9669  0 
>snd_intel8x0           35549  4 
>i2c_core               24897  2 i2c_ec,i2c_sis96x
>snd_ac97_codec         93413  2 snd_intel8x0m,snd_intel8x0
>snd_seq_dummy           7877  0 
>snd_seq_oss            33601  0 
>snd_seq_midi_event     11201  1 snd_seq_oss
>snd_seq                51249  5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
>snd_pcm_oss            43617  0 
>snd_mixer_oss          19393  1 snd_pcm_oss
>ac97_bus                6465  1 snd_ac97_codec
>k8temp                  9537  0 
>hwmon                   7493  1 k8temp
>snd_pcm                75205  6 snd_intel8x0m,snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_pcm_oss
>ide_cd                 40673  1 
>cdrom                  37345  1 ide_cd
>usblp                  17473  0 
>k8_edac                18433  0 
>edac_mc                25673  1 k8_edac
>snd_timer              25157  2 snd_seq,snd_pcm
>snd_page_alloc         13897  3 snd_intel8x0m,snd_intel8x0,snd_pcm
>snd_usb_lib            19649  1 snd_usb_audio
>snd_rawmidi            26817  1 snd_usb_lib
>snd_seq_device         11853  4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
>snd_hwdep              12869  1 snd_usb_audio
>snd                    53829  20 snd_intel8x0m,snd_usb_audio,snd_intel8x0,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_rawmidi,snd_seq_device,snd_hwdep
>soundcore              11681  1 snd
>serio_raw              10821  0 
>usb_storage            69249  1 
>scsi_mod              138477  3 sd_mod,sg,usb_storage
>ext3                  125641  1 
>jbd                    60777  1 ext3
>ehci_hcd               34381  0 
>ohci_hcd               23749  0 
>uhci_hcd               26833  0 
>
>------- /etc/modprobe.conf --------
>alias eth0 sis900
>alias snd-card-0 snd-intel8x0
>options snd-card-0 index=0  
>options snd-intel8x0 index=0  
>remove snd-intel8x0 { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-intel8x0
>alias usb-controller ehci-hcd
>alias usb-controller1 ohci-hcd
>alias eth1 usbnet
>#options ndiswrapper if_name=wlan0  
>#alias wlan0 ndiswrapper
>alias pcspkr off
>
>------- /etc/asound.conf --------
>#Generated by system-config-soundcard, do not edit by hand
>#SWCONF
>#DEV 0
>defaults.pcm.card 0 
>defaults.pcm.device 0 
>defaults.ctl.card 0 
>
>------- aplay -l --------
>**** List of PLAYBACK Hardware Devices ****
>card 0: SI7012 [SiS SI7012], device 0: Intel ICH [SiS SI7012]
>  Subdevices: 0/1
>  Subdevice #0: subdevice #0
>
>------- amixer --------
>Simple mixer control 'Master',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 63
>  Mono:
>  Front Left: Playback 57 [90%] [-9.00dB] [on]
>  Front Right: Playback 57 [90%] [-9.00dB] [on]
>Simple mixer control 'Master Mono',0
>  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
>  Playback channels: Mono
>  Limits: Playback 0 - 31
>  Mono: Playback 28 [90%] [-4.50dB] [on]
>Simple mixer control '3D Control - Switch',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [off]
>Simple mixer control 'PCM',0
>  Capabilities: pvolume pswitch pswitch-joined
>  Playback channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Mono:
>  Front Left: Playback 28 [90%] [7.50dB] [on]
>  Front Right: Playback 28 [90%] [7.50dB] [on]
>Simple mixer control 'PCM Out Path & Mute',0
>  Capabilities: enum
>  Items: 'pre 3D' 'post 3D'
>  Item0: 'pre 3D'
>Simple mixer control 'Line',0
>  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>Simple mixer control 'CD',0
>  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Front Left: Playback 28 [90%] [7.50dB] [on] Capture [on]
>  Front Right: Playback 28 [90%] [7.50dB] [on] Capture [on]
>Simple mixer control 'Mic',0
>  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>Simple mixer control 'Mic Boost (+20dB)',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [on]
>Simple mixer control 'Mic Select',0
>  Capabilities: enum
>  Items: 'Mic1' 'Mic2'
>  Item0: 'Mic1'
>Simple mixer control 'Video',0
>  Capabilities: cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Front Left - Front Right
>  Front Left: Capture [off]
>  Front Right: Capture [off]
>Simple mixer control 'Phone',0
>  Capabilities: pvolume pvolume-joined pswitch pswitch-joined cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Mono
>  Capture channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Mono: Playback 0 [0%] [-34.50dB] [off]
>  Front Left: Capture [off]
>  Front Right: Capture [off]
>Simple mixer control 'IEC958',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [on]
>Simple mixer control 'IEC958 Playback AC97-SPSA',0
>  Capabilities: volume volume-joined
>  Playback channels: Mono
>  Capture channels: Mono
>  Limits: 0 - 3
>  Mono: 1 [33%]
>Simple mixer control 'PC Speaker',0
>  Capabilities: pvolume pvolume-joined pswitch pswitch-joined
>  Playback channels: Mono
>  Limits: Playback 0 - 15
>  Mono: Playback 11 [73%] [-12.00dB] [on]
>Simple mixer control 'Aux',0
>  Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Playback channels: Front Left - Front Right
>  Capture channels: Front Left - Front Right
>  Limits: Playback 0 - 31
>  Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>  Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
>Simple mixer control 'Capture',0
>  Capabilities: cvolume cswitch cswitch-joined
>  Capture channels: Front Left - Front Right
>  Limits: Capture 0 - 15
>  Front Left: Capture 0 [0%] [0.00dB] [off]
>  Front Right: Capture 0 [0%] [0.00dB] [off]
>Simple mixer control 'Mix',0
>  Capabilities: cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Front Left - Front Right
>  Front Left: Capture [off]
>  Front Right: Capture [off]
>Simple mixer control 'Mix Mono',0
>  Capabilities: cswitch cswitch-exclusive
>  Capture exclusive group: 0
>  Capture channels: Front Left - Front Right
>  Front Left: Capture [off]
>  Front Right: Capture [off]
>Simple mixer control 'External Amplifier',0
>  Capabilities: pswitch pswitch-joined
>  Playback channels: Mono
>  Mono: Playback [on]
>
>------- /proc/asound/version --------
>Advanced Linux Sound Architecture Driver Version 1.0.14rc1 (Tue Jan 09 09:56:17 2007 UTC).
>
>------- rpm -q alsa-lib --------
>alsa-lib-1.0.14-0.1.rc1.fc6
>
>------- rpm -q alsa-utils --------
>alsa-utils-1.0.14-0.2.rc1.fc6
>
>------- /proc/asound/modules --------
> 0 snd_intel8x0
> 1 snd_usb_audio
>
>------- /proc/asound/pcm --------
>00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
>00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1
>01-00: USB Audio : USB Audio : capture 1
>
>------- /etc/sysconfig/hwconf --------
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control"
>vendorId: 1022
>deviceId: 1103
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 18
>pcifn:  3
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: k8_edac
>desc: "Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller"
>vendorId: 1022
>deviceId: 1102
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 18
>pcifn:  2
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map"
>vendorId: 1022
>deviceId: 1101
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 18
>pcifn:  1
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration"
>vendorId: 1022
>deviceId: 1100
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev: 18
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>driver: snd-intel8x0m
>desc: "Silicon Integrated Systems [SiS] AC'97 Modem Controller"
>vendorId: 1039
>deviceId: 7013
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  6
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Silicon Integrated Systems [SiS] SiS963 [MuTIOL Media IO]"
>vendorId: 1039
>deviceId: 0963
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  0
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Silicon Integrated Systems [SiS] SG86C202"
>vendorId: 1039
>deviceId: 0002
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  1
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "CHESEN USB Keyboard"
>usbclass: 3
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 1
>usbport: 1
>usbdev: 2
>vendorId: 0a81
>deviceId: 0101
>usbmfr: CHESEN
>usbprod: USB Keyboard
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-1.2869.fc6PAE ehci_hcd EHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-1.2869.fc6PAE ehci_hcd
>usbprod: EHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-1.2869.fc6PAE ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 1
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-1.2869.fc6PAE ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Linux 2.6.18-1.2869.fc6PAE ohci_hcd OHCI Host Controller"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 2
>usblevel: 0
>usbport: 0
>usbdev: 1
>vendorId: 0000
>deviceId: 0000
>usbmfr: Linux 2.6.18-1.2869.fc6PAE ohci_hcd
>usbprod: OHCI Host Controller
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0200"
>deviceId: PNP0200
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0303"
>deviceId: PNP0303
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0800"
>deviceId: PNP0800
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0a03"
>deviceId: PNP0a03
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0b00"
>deviceId: PNP0b00
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c02"
>deviceId: PNP0c02
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "PNP0c04"
>deviceId: PNP0c04
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Pinnacle PCTV"
>usbclass: 255
>usbsubclass: 255
>usbprotocol: 255
>usbbus: 3
>usblevel: 2
>usbport: 2
>usbdev: 6
>vendorId: 13d3
>deviceId: 3211
>usbprod: Pinnacle PCTV
>-
>class: OTHER
>bus: USB
>detached: 0
>driver: snd-usb-audio
>desc: "Pinnacle PCTV"
>usbclass: 1
>usbsubclass: 1
>usbprotocol: 0
>usbbus: 3
>usblevel: 2
>usbport: 2
>usbdev: 6
>vendorId: 13d3
>deviceId: 3211
>usbprod: Pinnacle PCTV
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "Pinnacle PCTV"
>usbclass: 255
>usbsubclass: 255
>usbprotocol: 255
>usbbus: 3
>usblevel: 2
>usbport: 2
>usbdev: 6
>vendorId: 13d3
>deviceId: 3211
>usbprod: Pinnacle PCTV
>-
>class: OTHER
>bus: ISAPNP
>detached: 0
>desc: "SYN1003"
>deviceId: SYN1003
>compat: SYN1002,SYN1000,PNP0f13
>-
>class: OTHER
>bus: PCI
>detached: 0
>desc: "Silicon Integrated Systems [SiS] 760/M760 Host"
>vendorId: 1039
>deviceId: 0760
>subVendorId: 0000
>subDeviceId: 0000
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  0
>pcifn:  0
>-
>class: OTHER
>bus: USB
>detached: 0
>desc: "USB2.0 Hub"
>usbclass: 9
>usbsubclass: 0
>usbprotocol: 0
>usbbus: 3
>usblevel: 1
>usbport: 5
>usbdev: 3
>vendorId: 05e3
>deviceId: 0605
>usbprod: USB2.0 Hub
>-
>class: NETWORK
>bus: PCI
>detached: 0
>device: eth0
>driver: sis900
>desc: "Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet"
>network.hwaddr: 00:c0:9f:cf:60:34
>vendorId: 1039
>deviceId: 0900
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  4
>pcifn:  0
>-
>class: MOUSE
>bus: USB
>detached: 0
>device: input/mice
>driver: genericwheelusb
>desc: "KYE NetScroll+ EYE"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 3
>usblevel: 2
>usbport: 0
>usbdev: 4
>vendorId: 0458
>deviceId: 001b
>usbmfr: KYE
>usbprod: NetScroll+ EYE
>-
>class: MOUSE
>bus: PSAUX
>detached: 0
>device: input/mice
>driver: synaptics
>desc: "SynPS/2 Synaptics TouchPad"
>-
>class: AUDIO
>bus: PCI
>detached: 0
>driver: snd-intel8x0
>desc: "Silicon Integrated Systems [SiS] AC'97 Sound Controller"
>vendorId: 1039
>deviceId: 7012
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  7
>-
>class: AUDIO
>bus: USB
>detached: 0
>desc: "Pinnacle PCTV"
>usbclass: 1
>usbsubclass: 2
>usbprotocol: 0
>usbbus: 3
>usblevel: 2
>usbport: 2
>usbdev: 6
>vendorId: 13d3
>deviceId: 3211
>usbprod: Pinnacle PCTV
>-
>class: CDROM
>bus: IDE
>detached: 0
>device: hdc
>desc: "HL-DT-ST DVD-RW GCA-4080N"
>-
>class: VIDEO
>bus: PCI
>detached: 0
>desc: "Silicon Integrated Systems [SiS] 661/741/760 PCI/AGP or 662/761Gx PCIE VGA Display Adapter"
>video.xdriver: sis
>vendorId: 1039
>deviceId: 6330
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  1
>pcidev:  0
>pcifn:  0
>-
>class: HD
>bus: USB
>detached: 0
>desc: "Generic Mass Storage Device"
>usbclass: 8
>usbsubclass: 6
>usbprotocol: 80
>usbbus: 3
>usblevel: 2
>usbport: 3
>usbdev: 7
>vendorId: 058f
>deviceId: 6362
>usbmfr: Generic
>usbprod: Mass Storage Device
>-
>class: HD
>bus: IDE
>detached: 0
>device: hda
>desc: "WDC WD600UE-22HCT0"
>physical: 16383/16/63
>logical: 65535/16/63
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sda
>desc: "Generic USB SD Reader"
>host: 0
>id: 0
>channel: 0
>lun: 0
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sdb
>desc: "Generic USB CF Reader"
>host: 0
>id: 0
>channel: 0
>lun: 1
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sdc
>desc: "Generic USB SM Reader"
>host: 0
>id: 0
>channel: 0
>lun: 2
>-
>class: HD
>bus: SCSI
>detached: 0
>device: sdd
>desc: "Generic USB MS Reader"
>host: 0
>id: 0
>channel: 0
>lun: 3
>-
>class: PRINTER
>bus: USB
>detached: 0
>driver: usblp
>desc: "hp hp business inkjet 1100"
>usbclass: 7
>usbsubclass: 1
>usbprotocol: 2
>usbbus: 3
>usblevel: 2
>usbport: 1
>usbdev: 5
>vendorId: 03f0
>deviceId: 0912
>usbmfr: hp
>usbprod: hp business inkjet 1100
>-
>class: KEYBOARD
>bus: PSAUX
>detached: 0
>desc: "AT Translated Set 2 keyboard"
>-
>class: KEYBOARD
>bus: USB
>detached: 0
>driver: keybdev
>desc: "CHESEN USB Keyboard"
>usbclass: 3
>usbsubclass: 1
>usbprotocol: 1
>usbbus: 2
>usblevel: 1
>usbport: 1
>usbdev: 2
>vendorId: 0a81
>deviceId: 0101
>usbmfr: CHESEN
>usbprod: USB Keyboard
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ehci-hcd
>desc: "Silicon Integrated Systems [SiS] USB 2.0 Controller"
>vendorId: 1039
>deviceId: 7002
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  3
>pcifn:  2
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "Silicon Integrated Systems [SiS] USB 1.0 Controller"
>vendorId: 1039
>deviceId: 7001
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  3
>pcifn:  1
>-
>class: USB
>bus: PCI
>detached: 0
>driver: ohci-hcd
>desc: "Silicon Integrated Systems [SiS] USB 1.0 Controller"
>vendorId: 1039
>deviceId: 7001
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  3
>pcifn:  0
>-
>class: SOCKET
>bus: PCI
>detached: 0
>driver: yenta_socket
>desc: "Texas Instruments PCI1410 PC card Cardbus Controller"
>vendorId: 104c
>deviceId: ac50
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  6
>pcifn:  0
>-
>class: IDE
>bus: PCI
>detached: 0
>desc: "Silicon Integrated Systems [SiS] 5513 [IDE]"
>vendorId: 1039
>deviceId: 5513
>subVendorId: 1025
>subDeviceId: 0083
>pciType: 1
>pcidom:    0
>pcibus:  0
>pcidev:  2
>pcifn:  5
>
>------- dmesg --------
>Linux version 2.6.20-1.2952.fc6PAE (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:39:42 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f400 size: 0000000000000c00 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000001bdf0000 end: 000000001bef0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000001bef0000 size: 000000000000a000 end: 000000001befa000 type: 3
>copy_e820_map() start: 000000001befa000 size: 0000000000006000 end: 000000001bf00000 type: 4
>copy_e820_map() start: 000000001bf00000 size: 0000000004100000 end: 0000000020000000 type: 2
>copy_e820_map() start: 00000000fff00000 size: 0000000000100000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000001bef0000 (usable)
> BIOS-e820: 000000001bef0000 - 000000001befa000 (ACPI data)
> BIOS-e820: 000000001befa000 - 000000001bf00000 (ACPI NVS)
> BIOS-e820: 000000001bf00000 - 0000000020000000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
>0MB HIGHMEM available.
>446MB LOWMEM available.
>found SMP MP-table at 000f7fd0
>NX (Execute Disable) protection: active
>Entering add_active_range(0, 0, 114416) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   114416
>  HighMem    114416 ->   114416
>early_node_map[1] active PFN ranges
>    0:        0 ->   114416
>On node 0 totalpages: 114416
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 1077 pages used for memmap
>  Normal zone: 109243 pages, LIFO batch:31
>  HighMem zone: 0 pages used for memmap
>DMI present.
>Using APIC driver default
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f7f60
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0x1bef619d
>ACPI: FADT (v001 SiS    755F     0x06040000 PTL  0x000f4240) @ 0x1bef9e3e
>ACPI: SSDT (v001 PTLTD  POWERNOW 0x06040000  LTP 0x00000001) @ 0x1bef9eb2
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0x1bef9f88
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0x1bef9fd8
>ACPI: DSDT (v001 PTLTD       755 0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x8008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:12 APIC version 16
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ11 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 30000000 (gap: 20000000:dff00000)
>Detected 1800.181 MHz processor.
>Built 1 zonelists.  Total pages: 113299
>Kernel command line: ro root=LABEL=/ vga=0x318 quiet selinux=0 resume2=swap:/dev/hda4
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ae000 soft=c078e000
>PID hash table entries: 2048 (order: 11, 8192 bytes)
>Console: colour dummy device 80x25
>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
>Memory: 446500k/457664k available (2197k kernel code, 10608k reserved, 1159k data, 240k init, 0k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xffa00000 - 0xffc00000   (2048 kB)
>    vmalloc : 0xdc800000 - 0xff9fe000   ( 561 MB)
>    lowmem  : 0xc0000000 - 0xdbef0000   ( 446 MB)
>      .init : 0xc074d000 - 0xc0789000   ( 240 kB)
>      .data : 0xc0625769 - 0xc0747494   (1159 kB)
>      .text : 0xc0400000 - 0xc0625769   (2197 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 3600.99 BogoMIPS (lpj=1800496)
>Security Framework v1.0.0 initialized
>SELinux:  Disabled at boot.
>Capability LSM initialized
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 078bfbff c3d3fbff 00000000 00000000 00000001 00000000 00000001
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 128K (64 bytes/line)
>CPU: After all inits, caps: 078bfbff c3d3fbff 00000000 00000410 00000001 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>CPU0: AMD Mobile AMD Sempron(tm) Processor 3000+ stepping 02
>Total of 1 processors activated (3600.99 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>Brought up 1 CPUs
>sizeof(vma)=88 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd776, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Uncovering SIS963 that hid as a SIS503 (compatible=0)
>Enabling SiS 96x SMBus.
>Boot video device is 0000:01:00.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 *7 9 10 11)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 *4 5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 9 10 11)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *9 10 11)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 8 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:04: ioport range 0x8000-0x807f could not be reserved
>pnp: 00:04: ioport range 0x8080-0x80ff has been reserved
>pnp: 00:04: ioport range 0x8100-0x811f has been reserved
>pnp: 00:04: ioport range 0x4d0-0x4d1 has been reserved
>PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
>PCI: Bridge: 0000:00:01.0
>  IO window: a000-afff
>  MEM window: e2100000-e21fffff
>  PREFETCH window: e8000000-efffffff
>PCI: Bus 2, cardbus bridge: 0000:00:06.0
>  IO window: 00002400-000024ff
>  IO window: 00002800-000028ff
>  PREFETCH window: 30000000-33ffffff
>  MEM window: 34000000-37ffffff
>PCI: Enabling device 0000:00:06.0 (0000 -> 0003)
>ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 19 (level, low) -> IRQ 16
>NET: Registered protocol family 2
>IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
>TCP established hash table entries: 16384 (order: 6, 327680 bytes)
>TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
>TCP: Hash tables configured (established 16384 bind 8192)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 1360k freed
>Simple Boot Flag at 0x38 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1181086125.539:1): initialized
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>ksign: Installing public key data
>Loading keyring
>- Added public key 299EAE34482B83F9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>vesafb: framebuffer at 0xe8000000, mapped to 0xdc880000, using 6144k, total 16384k
>vesafb: mode is 1024x768x32, linelength=4096, pages=1
>vesafb: protected mode interface info at cbe6:000c
>vesafb: pmi: set display start = c00cbe96, set palette = c00cbeda
>vesafb: scrolling: redraw
>vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
>Console: switching to colour frame buffer device 128x48
>fb0: VESA VGA frame buffer device
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Thermal Zone [THRM] (51 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AGP bridge 0
>agpgart: AGP aperture is 32M @ 0xe0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
>ACPI: PCI interrupt for device 0000:00:02.6 disabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>SIS5513: IDE controller at PCI slot 0000:00:02.5
>ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 18
>SIS5513: chipset revision 0
>SIS5513: not 100% native mode: will probe irqs later
>SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
>    ide0: BM-DMA at 0x2000-0x2007, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x2008-0x200f, BIOS settings: hdc:DMA, hdd:pio
>Probing IDE interface ide0...
>hda: WDC WD600UE-22HCT0, ATA DISK drive
>hda: hw_config=600b
>hda: hw_config=600b
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>hdc: HL-DT-ST DVD-RW GCA-4080N, ATAPI CD/DVD-ROM drive
>hdc: hw_config=404f
>hdc: hw_config=404f
>ide1 at 0x170-0x177,0x376 on irq 15
>hda: max request size: 128KiB
>hda: 117210240 sectors (60011 MB) w/2048KiB Cache, CHS=65535/16/63<6>hda: hw_config=600b
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1 hda2 hda3 hda4
>ide-floppy driver 0.99.newide
>Yenta: CardBus bridge found at 0000:00:06.0 [1025:0083]
>Yenta: Using CSCINT to route CSC interrupts to PCI
>Yenta: Routing CardBus interrupts to PCI
>Yenta TI: socket 0000:00:06.0, mfunc 0x00521d22, devctl 0x64
>Yenta: ISA IRQ mask 0x06f8, PCI irq 16
>Socket status: 30000006
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Found 1 Mobile AMD Sempron(tm) Processor 3000+ processors (version 2.00.00)
>powernow-k8:    0 : fid 0xa (1800 MHz), vid 0xa
>powernow-k8:    1 : fid 0x8 (1600 MHz), vid 0xc
>powernow-k8:    2 : fid 0x0 (800 MHz), vid 0x13
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S3 S4 S5)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 841k
>Time: tsc clocksource has been installed.
>Time: acpi_pm clocksource has been installed.
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 19
>ohci_hcd 0000:00:03.0: OHCI Host Controller
>ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
>ohci_hcd 0000:00:03.0: irq 19, io mem 0xe2002000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 20
>ohci_hcd 0000:00:03.1: OHCI Host Controller
>ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
>ohci_hcd 0000:00:03.1: irq 20, io mem 0xe2003000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 3 ports detected
>ACPI: PCI Interrupt 0000:00:03.2[D] -> GSI 23 (level, low) -> IRQ 21
>ehci_hcd 0000:00:03.2: EHCI Host Controller
>ehci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
>PCI: cache line size of 64 is not supported by device 0000:00:03.2
>ehci_hcd 0000:00:03.2: irq 21, io mem 0xe2004000
>ehci_hcd 0000:00:03.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 6 ports detected
>Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps: 0xa04713/0x4000
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 3-3: new high speed USB device using ehci_hcd and address 2
>usb 3-3: configuration #1 chosen from 1 choice
>hub 3-3:1.0: USB hub found
>hub 3-3:1.0: 4 ports detected
>usb 3-3.1: new low speed USB device using ehci_hcd and address 4
>usb 3-3.1: configuration #1 chosen from 1 choice
>input: KYE NetScroll+ EYE as /class/input/input3
>input: USB HID v1.10 Mouse [KYE NetScroll+ EYE] on usb-0000:00:03.2-3.1
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>usb 3-3.2: new full speed USB device using ehci_hcd and address 5
>usb 3-3.2: configuration #1 chosen from 1 choice
>usb 3-3.3: new high speed USB device using ehci_hcd and address 6
>usb 3-3.3: configuration #1 chosen from 1 choice
>usb 3-3.4: new high speed USB device using ehci_hcd and address 7
>usb 3-3.4: configuration #1 chosen from 1 choice
>usb 2-3: new low speed USB device using ohci_hcd and address 2
>usb 2-3: configuration #1 chosen from 1 choice
>input: CHESEN USB Keyboard as /class/input/input4
>input: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:03.1-3
>input: CHESEN USB Keyboard as /class/input/input5
>input: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:03.1-3
>SCSI subsystem initialized
>Initializing USB Mass Storage driver...
>scsi0 : SCSI emulation for USB Mass Storage devices
>usbcore: registered new interface driver usb-storage
>USB Mass Storage support registered.
>usb-storage: device found at 7
>usb-storage: waiting for device to settle before scanning
>scsi 0:0:0:0: Direct-Access     WD       3200JB External  0108 PQ: 0 ANSI: 0
>usb-storage: device scan complete
>EDAC MC: Ver: 2.0.1 May 16 2007
>EDAC MC0: Giving out device to k8_edac Athlon64/Opteron: DEV 0000:00:18.2
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x03F0 pid 0x0912
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>hdc: ATAPI 24X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 17
>intel8x0_measure_ac97_clock: measured 50485 usecs
>intel8x0: clocking to 48000
>sis96x_smbus 0000:00:02.1: SiS96x SMBus base address: 0x8100
>usbcore: registered new interface driver snd-usb-audio
>ACPI: PCI Interrupt 0000:00:02.6[C] -> GSI 18 (level, low) -> IRQ 17
>scsi 0:0:0:0: Attached scsi generic sg0 type 0
>sis900.c: v1.08.10 Apr. 2 2006
>Unable to initialize codec #0
>ACPI: PCI interrupt for device 0000:00:02.6 disabled
>Intel ICH Modem: probe of 0000:00:02.6 failed with error -13
>ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 16
>0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 13.
>0000:00:04.0: Using transceiver found at address 13 as default
>eth0: SiS 900 PCI Fast Ethernet at 0x1800, IRQ 16, 00:c0:9f:f0:e3:19.
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
>SCSI device sda: 625142448 512-byte hdwr sectors (320073 MB)
>sda: Write Protect is off
>sda: Mode Sense: 03 00 00 00
>sda: assuming drive cache: write through
> sda: sda1
>sd 0:0:0:0: Attached scsi disk sda
>cs: IO port probe 0x100-0x3af: clean.
>cs: IO port probe 0x3e0-0x4ff: excluding 0x480-0x48f
>cs: IO port probe 0x820-0x8ff: clean.
>cs: IO port probe 0xc00-0xcf7: clean.
>cs: IO port probe 0xa00-0xaff: clean.
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0xa
>codec_write 0: semaphore is not ready for register 0xa
>codec_write 0: semaphore is not ready for register 0xe
>codec_write 0: semaphore is not ready for register 0xe
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x1a
>codec_write 0: semaphore is not ready for register 0x1c
>codec_write 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>input: Power Button (FF) as /class/input/input6
>ACPI: Power Button (FF) [PWRF]
>input: Lid Switch as /class/input/input7
>ACPI: Lid Switch [LID]
>input: Power Button (CM) as /class/input/input8
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input9
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>usb 3-3.4: reset high speed USB device using ehci_hcd and address 7
>usb 3-3.4: reset high speed USB device using ehci_hcd and address 7
>EXT3 FS on hda3, internal journal
>Adding 1028152k swap on /dev/hda4.  Priority:-1 extents:1 across:1028152k
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (3575 buckets, 28600 max)
>eth0: Media Link On 100mbps full-duplex 
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>eth0: no IPv6 routers present
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>tun: Universal TUN/TAP device driver, 1.6
>tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x2c
>codec_read 0: semaphore is not ready for register 0x20
>codec_read 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x3a
>codec_write 0: semaphore is not ready for register 0x2a
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x10
>codec_write 0: semaphore is not ready for register 0x10
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x18
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x12
>codec_write 0: semaphore is not ready for register 0x6
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>codec_write 0: semaphore is not ready for register 0x2
>codec_write 0: semaphore is not ready for register 0x4
>

Actions: View

Attachments on bug 242814: 156289