Attachment 156315 Details for Bug 242863 – dmesg of 2.6.18-8.1.3.el5

dmesg of 2.6.18-8.1.3.el5

dmesg-2.6.18-8.1.3.el5.txt (text/plain), 36.71 KB, created by Haruo Tomita on 2007-06-06 05:24:51 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Haruo Tomita

Created: 2007-06-06 05:24:51 UTC

Size: 36.71 KB

patch

obsolete

>Linux version 2.6.18-8.1.3.el5 (root@localhost.localdomain) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #2 SMP Thu May 17 14:54:25 JST 2007
>BIOS-provided physical RAM map:
> BIOS-e820: 0000000000000000 - 000000000009c000 (usable)
> BIOS-e820: 000000000009c000 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 00000000cfaf0000 (usable)
> BIOS-e820: 00000000cfaf0000 - 00000000cfafc000 (ACPI data)
> BIOS-e820: 00000000cfafc000 - 00000000cfb00000 (ACPI NVS)
> BIOS-e820: 00000000cfb00000 - 00000000cfc00000 (usable)
> BIOS-e820: 00000000cfc00000 - 00000000d0000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff800000 - 00000000ffc00000 (reserved)
> BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
> BIOS-e820: 0000000100000000 - 0000000230000000 (usable)
>Warning only 4GB will be used.
>Use a PAE enabled kernel.
>3200MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f6180
>Using x86 segment limits to approximate NX protection
>On node 0 totalpages: 1048576
>  DMA zone: 4096 pages, LIFO batch:0
>  Normal zone: 225280 pages, LIFO batch:31
>  HighMem zone: 819200 pages, LIFO batch:31
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 PTLTD                                 ) @ 0x000f6150
>ACPI: RSDT (v001 PTLTD    RSDT   0x06040000  LTP 0x00000000) @ 0xcfaf3ed5
>ACPI: FADT (v001 NEC    033D     0x06040000 NEC  0x00000000) @ 0xcfafbdcc
>ACPI: MADT (v001 PTLTD  	 APIC   0x06040000  LTP 0x00000000) @ 0xcfafbe40
>ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 0xcfafbf9c
>ACPI: MCFG (v001 PTLTD    MCFG   0x06040000  LTP 0x00000000) @ 0xcfafbfc4
>ACPI: DSDT (v001 NEC    033D     0x06040000 MSFT 0x0100000e) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x808
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x06] enabled)
>Processor #6 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x02] lapic_id[0x08] enabled)
>Processor #8 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x03] lapic_id[0x0e] enabled)
>Processor #14 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
>Processor #2 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
>Processor #4 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0a] enabled)
>Processor #10 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0c] enabled)
>Processor #12 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x08] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x09] lapic_id[0x07] enabled)
>Processor #7 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] enabled)
>Processor #9 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0f] enabled)
>Processor #15 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x03] enabled)
>Processor #3 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x05] enabled)
>Processor #5 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0b] enabled)
>Processor #11 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0d] enabled)
>Processor #13 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
>Overriding APIC driver with bigsmp
>ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
>ACPI: IOAPIC (id[0x01] address[0xfec85000] gsi_base[24])
>IOAPIC[1]: apic_id 1, version 32, address 0xfec85000, GSI 24-47
>ACPI: IOAPIC (id[0x02] address[0xfec85400] gsi_base[48])
>IOAPIC[2]: apic_id 2, version 32, address 0xfec85400, GSI 48-71
>ACPI: IOAPIC (id[0x03] address[0xfec86000] gsi_base[72])
>IOAPIC[3]: apic_id 3, version 32, address 0xfec86000, GSI 72-95
>ACPI: IOAPIC (id[0x04] address[0xfec86400] gsi_base[96])
>IOAPIC[4]: apic_id 4, version 32, address 0xfec86400, GSI 96-119
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Physflat.  Using 5 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at d1000000 (gap: d0000000:10000000)
>Detected 3000.611 MHz processor.
>Built 1 zonelists.  Total pages: 1048576
>Kernel command line: ro root=LABEL=/1 rhgb quiet crashkernel=128M@16M
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>mapped IOAPIC to ffffb000 (fec85000)
>mapped IOAPIC to ffffa000 (fec85400)
>mapped IOAPIC to ffff9000 (fec86000)
>mapped IOAPIC to ffff8000 (fec86400)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c0737000 soft=c0717000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 3231900k/4194304k available (2043k kernel code, 170604k reserved, 846k data, 232k init, 2486208k highmem)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 6003.43 BogoMIPS (lpj=3001719)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>Leaving ESR disabled.
>SMP alternatives: switching to SMP code
>Booting processor 1/6 eip 3000
>CPU 1 irqstacks, hard=c0738000 soft=c0718000
>Initializing CPU#1
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.74 BogoMIPS (lpj=2999871)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 2/8 eip 3000
>CPU 2 irqstacks, hard=c0739000 soft=c0719000
>Initializing CPU#2
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.73 BogoMIPS (lpj=2999868)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#2.
>CPU2: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU2: Thermal monitoring enabled
>CPU2: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 3/14 eip 3000
>CPU 3 irqstacks, hard=c073a000 soft=c071a000
>Initializing CPU#3
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.72 BogoMIPS (lpj=2999862)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#3.
>CPU3: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU3: Thermal monitoring enabled
>CPU3: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 4/2 eip 3000
>CPU 4 irqstacks, hard=c073b000 soft=c071b000
>Initializing CPU#4
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.66 BogoMIPS (lpj=2999831)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#4.
>CPU4: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU4: Thermal monitoring enabled
>CPU4: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 5/4 eip 3000
>CPU 5 irqstacks, hard=c073c000 soft=c071c000
>Initializing CPU#5
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.68 BogoMIPS (lpj=2999841)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#5.
>CPU5: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU5: Thermal monitoring enabled
>CPU5: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 6/10 eip 3000
>CPU 6 irqstacks, hard=c073d000 soft=c071d000
>Initializing CPU#6
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.73 BogoMIPS (lpj=2999868)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#6.
>CPU6: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU6: Thermal monitoring enabled
>CPU6: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 7/12 eip 3000
>CPU 7 irqstacks, hard=c073e000 soft=c071e000
>Initializing CPU#7
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.70 BogoMIPS (lpj=2999852)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#7.
>CPU7: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU7: Thermal monitoring enabled
>CPU7: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 8/1 eip 3000
>CPU 8 irqstacks, hard=c073f000 soft=c071f000
>Initializing CPU#8
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.60 BogoMIPS (lpj=2999802)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#8.
>CPU8: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU8: Thermal monitoring enabled
>CPU8: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 9/7 eip 3000
>CPU 9 irqstacks, hard=c0740000 soft=c0720000
>Initializing CPU#9
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 6000.00 BogoMIPS (lpj=3000003)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#9.
>CPU9: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU9: Thermal monitoring enabled
>CPU9: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 10/9 eip 3000
>CPU 10 irqstacks, hard=c0741000 soft=c0721000
>Initializing CPU#10
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.72 BogoMIPS (lpj=2999864)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#10.
>CPU10: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU10: Thermal monitoring enabled
>CPU10: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 11/15 eip 3000
>CPU 11 irqstacks, hard=c0742000 soft=c0722000
>Initializing CPU#11
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.73 BogoMIPS (lpj=2999865)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#11.
>CPU11: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU11: Thermal monitoring enabled
>CPU11: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 12/3 eip 3000
>CPU 12 irqstacks, hard=c0743000 soft=c0723000
>Initializing CPU#12
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.69 BogoMIPS (lpj=2999849)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#12.
>CPU12: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU12: Thermal monitoring enabled
>CPU12: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 13/5 eip 3000
>CPU 13 irqstacks, hard=c0744000 soft=c0724000
>Initializing CPU#13
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.64 BogoMIPS (lpj=2999822)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 1
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#13.
>CPU13: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU13: Thermal monitoring enabled
>CPU13: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 14/11 eip 3000
>CPU 14 irqstacks, hard=c0745000 soft=c0725000
>Initializing CPU#14
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.73 BogoMIPS (lpj=2999866)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 2
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#14.
>CPU14: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU14: Thermal monitoring enabled
>CPU14: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 15/13 eip 3000
>CPU 15 irqstacks, hard=c0746000 soft=c0726000
>Initializing CPU#15
>Leaving ESR disabled.
>Calibrating delay using timer specific routine.. 5999.71 BogoMIPS (lpj=2999859)
>CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 000065bd 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 3
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 000065bd 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#15.
>CPU15: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU15: Thermal monitoring enabled
>CPU15: Intel Genuine Intel(R) CPU 3.00GHz stepping 08
>Total of 16 processors activated (95999.28 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 16 CPUs: 
>CPU#8 had 3 usecs TSC skew, fixed it up.
>Brought up 16 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=340 bytes
>sizeof(dentry)=136 bytes
>sizeof(ext3inode)=492 bytes
>sizeof(buffer_head)=52 bytes
>sizeof(skbuff)=172 bytes
>migration_cost=6,970
>checking if image is initramfs... it is
>Freeing initrd memory: 1452k freed
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: Using MMCONFIG
>Setting up standard PCI resources
>mtrr: your CPUs had inconsistent variable MTRR settings
>mtrr: probably your BIOS does not setup all CPUs.
>mtrr: corrected configuration.
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0800-087f claimed by ICH4 ACPI/GPIO/TCO
>PCI quirk: region 0980-09bf claimed by ICH4 GPIO
>PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
>PCI: PXH quirk detected, disabling MSI for SHPC device
>PCI: PXH quirk detected, disabling MSI for SHPC device
>Boot video device is 0000:0c:02.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB1._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB3._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB4._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB5._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB6._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB6.PX1A._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB6.PX1B._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB7._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB7.DB1A._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEB7.DB1B._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 7 10 11 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 11 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *10 11 14 15)
>ACPI: Device [M1] status [0000000c]: functional but not present; setting present
>ACPI: Device [M2] status [0000000c]: functional but not present; setting present
>ACPI: Device [M3] status [0000000c]: functional but not present; setting present
>ACPI: Device [M4] status [0000000c]: functional but not present; setting present
>ACPI: Device [M5] status [0000000c]: functional but not present; setting present
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new driver usbfs
>usbcore: registered new driver hub
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0b: ioport range 0x540-0x55f has been reserved
>pnp: 00:0b: ioport range 0x560-0x563 could not be reserved
>pnp: 00:0b: ioport range 0x564-0x567 could not be reserved
>pnp: 00:0b: ioport range 0x568-0x56f could not be reserved
>pnp: 00:0b: ioport range 0x600-0x61f has been reserved
>pnp: 00:0c: ioport range 0xb04-0xb04 has been reserved
>pnp: 00:0c: ioport range 0x419-0x41b has been reserved
>pnp: 00:0c: ioport range 0x41d-0x41f has been reserved
>pnp: 00:0c: ioport range 0x4d0-0x4d1 has been reserved
>pnp: 00:0c: ioport range 0x4d6-0x4d6 has been reserved
>pnp: 00:0c: ioport range 0xc00-0xc01 has been reserved
>pnp: 00:0c: ioport range 0xc06-0xc08 has been reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:02.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:03.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:04.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:05.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:06:00.2
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:06.0
>  IO window: disabled.
>  MEM window: d0100000-d01fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:09:00.0
>  IO window: disabled.
>  MEM window: d0300000-d03fffff
>  PREFETCH window: d0800000-d08fffff
>PCI: Bridge: 0000:09:00.2
>  IO window: 2000-2fff
>  MEM window: d0400000-d04fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:07.0
>  IO window: 2000-2fff
>  MEM window: d0200000-d04fffff
>  PREFETCH window: d0800000-d08fffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 3000-3fff
>  MEM window: d0500000-d05fffff
>  PREFETCH window: d8000000-dfffffff
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:06:00.0 to 64
>ACPI: PCI Interrupt 0000:06:00.2[B] -> GSI 17 (level, low) -> IRQ 177
>PCI: Setting latency timer of device 0000:06:00.2 to 64
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>PCI: Setting latency timer of device 0000:09:00.0 to 64
>PCI: Setting latency timer of device 0000:09:00.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>Simple Boot Flag at 0x37 set to 0x1
>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1181065594.130:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>Initializing Cryptographic API
>ksign: Installing public key data
>Loading keyring
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>pcie_portdrv_probe->Dev[2601:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>Allocate Port Service[0000:00:01.0:pcie01]
>PCI: Setting latency timer of device 0000:00:02.0 to 64
>pcie_portdrv_probe->Dev[2602:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:02.0:pcie00]
>Allocate Port Service[0000:00:02.0:pcie01]
>Allocate Port Service[0000:00:02.0:pcie02]
>PCI: Setting latency timer of device 0000:00:03.0 to 64
>pcie_portdrv_probe->Dev[2603:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:03.0:pcie00]
>Allocate Port Service[0000:00:03.0:pcie01]
>PCI: Setting latency timer of device 0000:00:04.0 to 64
>pcie_portdrv_probe->Dev[2604:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:04.0:pcie00]
>Allocate Port Service[0000:00:04.0:pcie01]
>Allocate Port Service[0000:00:04.0:pcie02]
>PCI: Setting latency timer of device 0000:00:05.0 to 64
>pcie_portdrv_probe->Dev[2605:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:05.0:pcie00]
>Allocate Port Service[0000:00:05.0:pcie01]
>PCI: Setting latency timer of device 0000:00:06.0 to 64
>pcie_portdrv_probe->Dev[2606:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:06.0:pcie00]
>Allocate Port Service[0000:00:06.0:pcie01]
>PCI: Setting latency timer of device 0000:00:07.0 to 64
>pcie_portdrv_probe->Dev[2607:8086] has invalid IRQ. Check vendor BIOS
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:07.0:pcie00]
>Allocate Port Service[0000:00:07.0:pcie01]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:07: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH5: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 58
>ICH5: chipset revision 2
>ICH5: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0x1060-0x1067, BIOS settings: hda:pio, hdb:pio
>    ide1: BM-DMA at 0x1068-0x106f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: DV-28E-N, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>Probing IDE interface ide1...
>ide-floppy driver 0.99.newide
>usbcore: registered new driver hiddev
>usbcore: registered new driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSC0] at 0x60,0x64 irq 1,12
>serio: i8042 AUX port at 0x60,0x64 irq 12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>mice: PS/2 mouse device common for all mice
>md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
>md: bitmap version 4.39
>TCP bic registered
>Initializing IPsec netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 232k freed
>Write protecting the kernel read-only data: 383k
>Time: tsc clocksource has been installed.
>input: AT Translated Set 2 keyboard as /class/input/input0
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 169
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 169, io base 0x00001000
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 66
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 66, io base 0x00001020
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 74
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 74, io mem 0xd0000000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 3 ports detected
>megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
>SCSI subsystem initialized
>megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
>megaraid: probe new device 0x1000:0x0408:0x1033:0x8287: bus 10:slot 14:func 0
>ACPI: PCI Interrupt 0000:0a:0e.0[A] -> GSI 86 (level, low) -> IRQ 82
>megaraid: fw version:[5S5I] bios version:[H429]
>scsi0 : LSI Logic MegaRAID driver
>scsi[0]: scanning scsi channel 0 [Phy 0] for non-raid devices
>input: ImExPS/2 Logitech Wheel Mouse as /class/input/input1
>  Vendor: NEC       Model: GEM318P           Rev: 1   
>  Type:   Processor                          ANSI SCSI revision: 02
>scsi[0]: scanning scsi channel 1 [Phy 1] for non-raid devices
>scsi[0]: scanning scsi channel 2 [virtual] for logical drives
>  Vendor: MegaRAID  Model: LD 0 RAID5  210G  Rev: 5S5I
>  Type:   Direct-Access                      ANSI SCSI revision: 02
>SCSI device sda: 430098432 512-byte hdwr sectors (220210 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: asking for cache data failed
>sda: assuming drive cache: write through
>SCSI device sda: 430098432 512-byte hdwr sectors (220210 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 00 00 00
>sda: asking for cache data failed
>sda: assuming drive cache: write through
> sda: sda1 sda2 sda3 sda4 < sda5 >
>sd 0:2:0:0: Attached scsi disk sda
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1181065606.699:2): selinux=0 auid=4294967295
>Intel(R) PRO/1000 Network Driver - version 7.2.7-k2-NAPI
>Copyright (c) 1999-2006 Intel Corporation.
>ACPI: PCI Interrupt 0000:0b:04.0[A] -> GSI 102 (level, low) -> IRQ 90
>e1000: 0000:0b:04.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:13:38:ee:aa
>hda: ATAPI 24X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
>ACPI: PCI Interrupt 0000:0b:04.1[B] -> GSI 103 (level, low) -> IRQ 98
>intel_rng: FWH not detected
>e1000: 0000:0b:04.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:30:13:38:ee:ab
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE]
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 17 (level, low) -> IRQ 177
>e1000: eth1: e1000_probe: Intel(R) PRO/1000 Network Connection
>input: PC Speaker as /class/input/input2
>scsi 0:0:14:0: Attached scsi generic sg0 type 3
>sd 0:2:0:0: Attached scsi generic sg1 type 0
>floppy0: no floppy controllers found
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>ACPI: Power Button (FF) [PWRF]
>ACPI: Sleep Button (CM) [SLPB]
>ACPI: Power Button (CM) [PWRB]
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda5, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda1, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on sda2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 2096472k swap on /dev/sda3.  Priority:-1 extents:1 across:2096472k
>IA-32 Microcode Update Driver: v1.14a <tigran@veritas.com>
>Loading iSCSI transport class v2.0-685.<5>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>IPv6 over IPv4 tunneling driver
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps Full Duplex
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>audit(1181033225.938:3): audit_pid=3637 old=0 by auid=4294967295
>Bluetooth: Core ver 2.10
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>eth0: no IPv6 routers present
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1

Actions: View

Attachments on bug 242863: 156315 | 156316