Attachment 156322 Details for Bug 242472 – dmesg output for F7 rescue cd booted on P2120

dmesg output for F7 rescue cd booted on P2120

f7-nologvol-dmesg.out (text/plain), 16.00 KB, created by TC on 2007-06-06 06:48:33 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: TC

Created: 2007-06-06 06:48:33 UTC

Size: 16.00 KB

patch

obsolete

> switching to UP code
><6>Freeing SMP alternatives: 13k freed
><6>ACPI: Core revision 20070126
><4>ACPI: setting ELCR to 0200 (from 0a00)
><4>CPU0: Transmeta(tm) Crusoe(tm) Processor TM5800 stepping 03
><5>SMP motherboard not detected.
><5>Local APIC not detected. Using dummy APIC emulation.
><6>Brought up 1 CPUs
><7>sizeof(vma)=84 bytes
><7>sizeof(page)=32 bytes
><7>sizeof(inode)=336 bytes
><7>sizeof(dentry)=132 bytes
><7>sizeof(ext3inode)=488 bytes
><7>sizeof(buffer_head)=56 bytes
><7>sizeof(skbuff)=176 bytes
><7>sizeof(task_struct)=1376 bytes
><4>Time: 14:30:09  Date: 05/06/107
><6>NET: Registered protocol family 16
><6>ACPI: bus type pci registered
><6>PCI: PCI BIOS revision 2.10 entry at 0xfd89e, last bus=1
><6>PCI: Using configuration type 1
><4>Setting up standard PCI resources
><6>ACPI: Interpreter enabled
><6>ACPI: (supports S0 S3 S4 S5)
><6>ACPI: Using PIC for interrupt routing
><6>ACPI: PCI Root Bridge [PCI0] (0000:00)
><7>PCI: Probing PCI hardware (bus 00)
><4>PCI quirk: region ff00-ff3f claimed by ali7101 ACPI
><4>PCI quirk: region ff80-ff9f claimed by ali7101 SMB
><7>Boot video device is 0000:00:14.0
><7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
><4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 11) *0, disabled.
><4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 *9 10 11)
><4>ACPI: PCI Interrupt Link [LNKU] (IRQs 3 4 5 7 9 10 *11)
><6>ACPI: Power Resource [USBP] (on)
><6>Linux Plug and Play Support v0.97 (c) Adam Belay
><6>pnp: PnP ACPI init
><6>pnp: PnP ACPI: found 8 devices
><6>usbcore: registered new interface driver usbfs
><6>usbcore: registered new interface driver hub
><6>usbcore: registered new device driver usb
><6>PCI: Using ACPI for IRQ routing
><6>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
><6>NetLabel: Initializing
><6>NetLabel:  domain hash size = 128
><6>NetLabel:  protocols = UNLABELED CIPSOv4
><6>NetLabel:  unlabeled traffic allowed by default
><6>Time: tsc clocksource has been installed.
><6>pnp: 00:01: ioport range 0x40b-0x40b has been reserved
><6>pnp: 00:01: ioport range 0x480-0x48f has been reserved
><6>pnp: 00:01: ioport range 0x4d0-0x4d1 has been reserved
><4>PCI: Bus 1, cardbus bridge: 0000:00:0c.0
><4>  IO window: 00001c00-00001cff
><4>  IO window: 00002000-000020ff
><4>  PREFETCH window: 10000000-13ffffff
><4>  MEM window: 14000000-17ffffff
><4>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 9
><7>PCI: setting IRQ 9 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:0c.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
><6>NET: Registered protocol family 2
><4>IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
><4>TCP established hash table entries: 8192 (order: 4, 98304 bytes)
><4>TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
><6>TCP: Hash tables configured (established 8192 bind 8192)
><6>TCP reno registered
><6>checking if image is initramfs... it is
><6>Switched to high resolution mode on CPU 0
><6>Freeing initrd memory: 5541k freed
><6>Simple Boot Flag at 0x7f set to 0x1
><6>apm: BIOS not found.
><6>audit: initializing netlink socket (disabled)
><5>audit(1181140210.514:1): initialized
><4>Total HugeTLB memory allocated, 0
><5>VFS: Disk quotas dquot_6.5.1
><4>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
><7>SELinux:  Registering netfilter hooks
><4>ksign: Installing public key data
><4>Loading keyring
><4>- Added public key C3680E46D35DB7E1
><4>- User ID: Red Hat, Inc. (Kernel Module GPG key)
><6>io scheduler noop registered
><6>io scheduler anticipatory registered
><6>io scheduler deadline registered
><6>io scheduler cfq registered (default)
><6>Activating ISA DMA hang workarounds.
><6>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
><6>ACPI: Processor [CPU0] (supports 8 throttling states)
><6>isapnp: Scanning for PnP cards...
><6>isapnp: No Plug & Play device found
><6>Real Time Clock Driver v1.12ac
><6>Non-volatile memory driver v1.2
><6>Linux agpgart interface v0.102 (c) Dave Jones
><6>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
><4>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
><6>input: Macintosh mouse button emulation as /class/input/input0
><6>Yenta: CardBus bridge found at 0000:00:0c.0 [10cf:10c6]
><6>Yenta: adjusting diagnostic: 41 -> 61
><6>Yenta: Enabling burst memory read transactions
><6>Yenta: Using CSCINT to route CSC interrupts to PCI
><6>Yenta: Routing CardBus interrupts to PCI
><6>Yenta TI: socket 0000:00:0c.0, mfunc 0x00c61d22, devctl 0x46
><6>Time: acpi_pm clocksource has been installed.
><6>Yenta: ISA IRQ mask 0x0cf8, PCI irq 9
><6>Socket status: 30000006
><6>usbcore: registered new interface driver libusual
><6>usbcore: registered new interface driver hiddev
><6>usbcore: registered new interface driver usbhid
><6>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
><6>PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
><6>serio: i8042 KBD port at 0x60,0x64 irq 1
><6>serio: i8042 AUX port at 0x60,0x64 irq 12
><6>mice: PS/2 mouse device common for all mice
><6>input: AT Translated Set 2 keyboard as /class/input/input1
><6>TCP bic registered
><6>Initializing XFRM netlink socket
><6>NET: Registered protocol family 1
><6>NET: Registered protocol family 17
><4>Using IPI No-Shortcut mode
><4>  Magic number: 11:411:535
><4>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
><6>Freeing unused kernel memory: 236k freed
><4>Write protecting the kernel read-only data: 803k
><6>IBM TrackPoint firmware: 0x0e, buttons: 3/3
><6>input: TPPS/2 IBM TrackPoint as /class/input/input2
><6>loop: loaded (max 8 devices)
><4>floppy0: no floppy controllers found
><6>BIOS EDD facility v0.16 2004-Jun-25, 1 devices found
><6>input: PC Speaker as /class/input/input3
><6>squashfs: version 3.2-r2 (2007/01/15) Phillip Lougher
><6>NET: Registered protocol family 10
><6>lo: Disabled Privacy Extensions
><6>Mobile IPv6
><5>SCSI subsystem initialized
><6>Loading iSCSI transport class v2.0-724.
><5>iscsi: registered transport (tcp)
><4>PCI: Enabling device 0000:00:09.2 (0000 -> 0002)
><4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 9
><6>ACPI: PCI Interrupt 0000:00:09.2[C] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
><6>ehci_hcd 0000:00:09.2: EHCI Host Controller
><6>ehci_hcd 0000:00:09.2: new USB bus registered, assigned bus number 1
><6>ehci_hcd 0000:00:09.2: irq 9, io mem 0x18023000
><6>ehci_hcd 0000:00:09.2: USB 2.0 started, EHCI 0.95, driver 10 Dec 2004
><6>usb usb1: configuration #1 chosen from 1 choice
><6>hub 1-0:1.0: USB hub found
><6>hub 1-0:1.0: 2 ports detected
><7>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
><4>ACPI: PCI Interrupt Link [LNKU] enabled at IRQ 11
><7>PCI: setting IRQ 11 as level-triggered
><6>ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LNKU] -> GSI 11 (level, low) -> IRQ 11
><6>ohci_hcd 0000:00:02.0: OHCI Host Controller
><6>ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
><6>ohci_hcd 0000:00:02.0: irq 11, io mem 0xe8014000
><6>usb usb2: configuration #1 chosen from 1 choice
><6>hub 2-0:1.0: USB hub found
><6>hub 2-0:1.0: 3 ports detected
><4>PCI: Enabling device 0000:00:09.0 (0000 -> 0002)
><6>ACPI: PCI Interrupt 0000:00:09.0[A] -> Link [LNKA] -> GSI 9 (level, low) -> IRQ 9
><7>PCI: Setting latency timer of device 0000:00:09.0 to 64
><6>ohci_hcd 0000:00:09.0: OHCI Host Controller
><6>ohci_hcd 0000:00:09.0: new USB bus registered, assigned bus number 3
><6>ohci_hcd 0000:00:09.0: irq 9, io mem 0x18020000
><6>usb usb3: configuration #1 chosen from 1 choice
><6>hub 3-0:1.0: USB hub found
><6>hub 3-0:1.0: 1 port detected
><4>PCI: Enabling device 0000:00:09.1 (0000 -> 0002)
><4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 9
><6>ACPI: PCI Interrupt 0000:00:09.1[B] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
><7>PCI: Setting latency timer of device 0000:00:09.1 to 64
><6>ohci_hcd 0000:00:09.1: OHCI Host Controller
><6>ohci_hcd 0000:00:09.1: new USB bus registered, assigned bus number 4
><6>ohci_hcd 0000:00:09.1: irq 9, io mem 0x18021000
><6>usb usb4: configuration #1 chosen from 1 choice
><6>hub 4-0:1.0: USB hub found
><6>hub 4-0:1.0: 1 port detected
><4>Clocksource tsc unstable (delta = -437721835 ns)
><6>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 9 (level, low) -> IRQ 9
><5>fw_ohci: Added fw-ohci device 0000:00:13.0, OHCI version 1.10
><5>fw_core: created new fw device fw0 (0 config rom retries)
><6>cs: IO port probe 0x100-0x3af: clean.
><6>8139too Fast Ethernet driver 0.9.28
><6>ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKB] -> GSI 9 (level, low) -> IRQ 9
><6>eth0: RealTek RTL8139 at 0xcf8d4800, 00:e0:00:fa:91:46, IRQ 9
><7>eth0:  Identified 8139 chip type 'RTL-8139C'
><7>libata version 2.20 loaded.
><4>ACPI: Unable to derive IRQ for device 0000:00:0f.0
><4>ACPI: PCI Interrupt 0000:00:0f.0[A]: no GSI
><6>ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011800 irq 14
><6>ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011808 irq 15
><6>scsi0 : pata_ali
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: ATA-5: TOSHIBA MK3021GAS, GA125F, max UDMA/100
><6>ata1.00: 58605120 sectors, multi 16: LBA 
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: configured for UDMA/100
><6>scsi1 : pata_ali
><6>ata2.00: ATAPI, max UDMA/33
><6>ata2.00: configured for UDMA/33
><5>scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK3021GA GA12 PQ: 0 ANSI: 5
><5>SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><6> sda:<3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
><6>ata1: soft resetting port
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: configured for UDMA/100
><6>ata1: EH complete
><4> unknown partition table
><5>sd 0:0:0:0: Attached scsi disk sda
><5>scsi 1:0:0:0: CD-ROM            TOSHIBA  DVD-ROM SD-R2212 1F15 PQ: 0 ANSI: 5
><4>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
><6>Uniform CD-ROM driver Revision: 3.20
><7>sr 1:0:0:0: Attached scsi CD-ROM sr0
><7>ISO 9660 Extensions: Microsoft Joliet Level 3
><4>Unable to load NLS charset utf8
><4>Unable to load NLS charset utf8
><7>ISO 9660 Extensions: RRIP_1991A
><4>Unable to identify CD-ROM format.
><4>VFS: Can't find an ext2 filesystem on dev loop0.
><7>security:  3 users, 6 roles, 1816 types, 78 bools, 1 sens, 1024 cats
><7>security:  60 classes, 65638 rules
><7>SELinux:  Completing initialization.
><7>SELinux:  Setting up existing superblocks.
><7>SELinux: initialized (dev loop0, type squashfs), not configured for labeling
><7>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
><7>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
><7>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
><7>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
><7>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
><7>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
><7>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
><7>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
><7>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
><7>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
><7>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
><7>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
><7>SELinux: initialized (dev proc, type proc), uses genfs_contexts
><7>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
><7>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
><7>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
><5>audit(1181140619.608:2): policy loaded auid=4294967295
><6>md: raid0 personality registered for level 0
><6>md: raid1 personality registered for level 1
><6>raid5: measuring checksumming speed
><4>   8regs     :  1124.000 MB/sec
><4>   8regs_prefetch:  1124.000 MB/sec
><4>   32regs    :   760.000 MB/sec
><4>   32regs_prefetch:   752.000 MB/sec
><4>   pII_mmx   :  2044.000 MB/sec
><4>   p5_mmx    :  2016.000 MB/sec
><4>raid5: using function: pII_mmx (2044.000 MB/sec)
><4>raid6: int32x1    273 MB/s
><4>raid6: int32x2    300 MB/s
><4>raid6: int32x4    281 MB/s
><4>raid6: int32x8    179 MB/s
><4>raid6: mmxx1      304 MB/s
><4>raid6: mmxx2      570 MB/s
><4>raid6: using algorithm mmxx2 (570 MB/s)
><6>md: raid6 personality registered for level 6
><6>md: raid5 personality registered for level 5
><6>md: raid4 personality registered for level 4
><6>md: raid10 personality registered for level 10
><4>GFS2 (built May 23 2007 22:13:32) installed
><6>Lock_Nolock (built May 23 2007 22:13:44) installed
><6>JFS: nTxBlock = 1868, nTxLock = 14944
><6>SGI XFS with ACLs, security attributes, large block numbers, no debug enabled
><6>SGI XFS Quota Management subsystem
><6>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
><6>device-mapper: multipath: version 1.0.5 loaded
><6>device-mapper: multipath round-robin: version 1.0.0 loaded
><6>device-mapper: multipath emc: version 0.0.3 loaded
><3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.00: cmd c8/00:20:00:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 16384 in
><4>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
><6>ata1: soft resetting port
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: configured for UDMA/100
><6>ata1: EH complete
><5>SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><5>audit(1181140662.101:3): audit_pid=619 old=0 by auid=4294967295 subj=system_u:system_r:anaconda_t:s0
><6>eth0: link up, 100Mbps, full-duplex, lpa 0x43E1
><3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.00: cmd c8/00:08:38:3d:7e/00:00:00:00:00/e3 tag 0 cdb 0x0 data 4096 in
><4>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
><6>ata1: soft resetting port
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: configured for UDMA/100
><6>ata1: EH complete
><5>SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
><4>ata1.00: limiting speed to UDMA/66:PIO4
><3>ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x2 frozen
><3>ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 cdb 0x0 data 4096 in
><4>         res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
><6>ata1: soft resetting port
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: ata_hpa_resize 1: sectors = 58605120, hpa_sectors = 58605120
><6>ata1.00: configured for UDMA/66
><6>ata1: EH complete
><5>SCSI device sda: 58605120 512-byte hdwr sectors (30006 MB)
><5>sda: Write Protect is off
><7>sda: Mode Sense: 00 3a 00 00
><5>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA

Actions: View

Attachments on bug 242472: 156322 | 156323 | 156418 | 156419 | 156420 | 156482