Attachment 156414 Details for Bug 234283 – dmesg output from step1 machine

dmesg output from step1 machine

kg7raid-cpu-step1.txt (text/plain), 20.88 KB, created by Gerry Reno on 2007-06-07 00:39:18 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Gerry Reno

Created: 2007-06-07 00:39:18 UTC

Size: 20.88 KB

patch

obsolete

>Linux version 2.6.20-1.2952.fc6 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:59:18 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009fc00 end: 000000000009fc00 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009fc00 size: 0000000000000400 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007fef0000 end: 000000007fff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007fff0000 size: 0000000000003000 end: 000000007fff3000 type: 4
>copy_e820_map() start: 000000007fff3000 size: 000000000000d000 end: 0000000080000000 type: 3
>copy_e820_map() start: 00000000ffff0000 size: 0000000000010000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
> BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
> BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
>1151MB HIGHMEM available.
>896MB LOWMEM available.
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 524272) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   524272
>early_node_map[1] active PFN ranges
>    0:        0 ->   524272
>On node 0 totalpages: 524272
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 2879 pages used for memmap
>  HighMem zone: 292017 pages, LIFO batch:31
>DMI 2.2 present.
>Using APIC driver default
>ACPI: RSDP (v000 761686                                ) @ 0x000f6a70
>ACPI: RSDT (v001 761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3000
>ACPI: FADT (v001 761686 AWRDACPI 0x42302e31 AWRD 0x00000000) @ 0x7fff3040
>ACPI: DSDT (v001 761686 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x4008
>Allocating PCI resources starting at 88000000 (gap: 80000000:7fff0000)
>Detected 1252.920 MHz processor.
>Built 1 zonelists.  Total pages: 519153
>Kernel command line: ro root=/dev/VolGroup01/LogVol00 rhgb quiet
>Local APIC disabled by BIOS -- you can enable it with "lapic"
>mapped APIC to ffffd000 (0241b000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2067756k/2097088k available (2190k kernel code, 27988k reserved, 1159k data, 236k init, 1179584k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623831 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc0623831   (2190 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 2507.05 BogoMIPS (lpj=1253529)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: 0383f9ff c1c3f9ff 00000000 00000000 00000000 00000000 00000000
>CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
>CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
>CPU: L2 Cache: 256K (64 bytes/line)
>CPU: After all inits, caps: 0383f1ff c1c3f9ff 00000000 00000420 00000000 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>Freeing SMP alternatives: 12k freed
>ACPI: Core revision 20060707
>ACPI: setting ELCR to 0800 (from 0e20)
>CPU0: AMD Athlon(tm) XP stepping 01
>SMP motherboard not detected.
>Local APIC not detected. Using dummy APIC emulation.
>Brought up 1 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfb690, last bus=1
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using PIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
>PCI quirk: region 6000-607f claimed by vt82c686 HW-mon
>PCI quirk: region 5000-500f claimed by vt82c686 SMB
>Boot video device is 0000:00:0f.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 10 11 12 14 15) *9
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 13 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: disabled.
>  PREFETCH window: disabled.
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2242k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: overridden by ACPI.
>audit: initializing netlink socket (disabled)
>audit(1181066907.946:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 299EAE34482B83F9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Disabling Via external APIC routing
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected AMD 761 chipset
>agpgart: AGP aperture is 64M @ 0xf0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:09: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>VP_IDE: IDE controller at PCI slot 0000:00:07.1
>VP_IDE: chipset revision 6
>VP_IDE: not 100% native mode: will probe irqs later
>VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
>    ide0: BM-DMA at 0x9400-0x9407, BIOS settings: hda:DMA, hdb:pio
>    ide1: BM-DMA at 0x9408-0x940f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>HPT302: IDE controller at PCI slot 0000:00:08.0
>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
>PCI: setting IRQ 11 as level-triggered
>ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>HPT302: chipset revision 2
>HPT302: 100% native mode on irq 11
>HPT3xxN detected, FREQ: 75, PLL: 35
>HPT37X: using 50MHz internal PLL
>    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:pio
>    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:DMA, hdh:pio
>Probing IDE interface ide2...
>hde: HDT722516DLAT80, ATA DISK drive
>hde: hw_config=600b
>hde: hw_config=600b
>ide2 at 0xa000-0xa007,0xa402 on irq 11
>Probing IDE interface ide3...
>hdg: HDT722516DLAT80, ATA DISK drive
>hdg: hw_config=600b
>hdg: hw_config=600b
>ide3 at 0xa800-0xa807,0xac02 on irq 11 (shared with ide2)
>HPT370A: IDE controller at PCI slot 0000:00:13.0
>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
>PCI: setting IRQ 10 as level-triggered
>ACPI: PCI Interrupt 0000:00:13.0[A] -> Link [LNKC] -> GSI 10 (level, low) -> IRQ 10
>HPT370A: chipset revision 4
>HPT370A: 100% native mode on irq 10
>HPT37X: using 33MHz PCI clock
>    ide4: BM-DMA at 0xcc00-0xcc07, BIOS settings: hdi:DMA, hdj:pio
>    ide5: BM-DMA at 0xcc08-0xcc0f, BIOS settings: hdk:DMA, hdl:pio
>Probing IDE interface ide4...
>hdi: HDT722516DLAT80, ATA DISK drive
>hdi: hw_config=600b
>hdi: hw_config=600b
>ide4 at 0xbc00-0xbc07,0xc002 on irq 10
>Probing IDE interface ide5...
>hdk: IC35L080AVVA07-0, ATA DISK drive
>hdk: hw_config=600b
>hdk: hw_config=600b
>ide5 at 0xc400-0xc407,0xc802 on irq 10
>Probing IDE interface ide1...
>hde: max request size: 512KiB
>hde: 321672960 sectors (164696 MB) w/7674KiB Cache, CHS=20023/255/63<6>hde: hw_config=600b
>, UDMA(100)
>hde: cache flushes supported
> hde: hde1
>hdg: max request size: 512KiB
>hdg: 321672960 sectors (164696 MB) w/7674KiB Cache, CHS=20023/255/63<6>hdg: hw_config=600b
>, UDMA(100)
>hdg: cache flushes supported
> hdg: hdg1
>hdi: max request size: 512KiB
>hdi: 321672960 sectors (164696 MB) w/7674KiB Cache, CHS=20023/255/63<6>hdi: hw_config=600b
>, UDMA(100)
>hdi: cache flushes supported
> hdi: hdi1 hdi2 hdi3
>hdk: max request size: 128KiB
>hdk: 160836480 sectors (82348 MB) w/1863KiB Cache, CHS=65535/16/63<6>hdk: hw_config=600b
>, UDMA(100)
>hdk: cache flushes supported
> hdk: hdk1 hdk2 hdk3
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>powernow-k8: Processor cpuid 681 not supported
>Using IPI No-Shortcut mode
>Time: tsc clocksource has been installed.
>ACPI: (supports S0 S1 S4 S5)
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:07.2[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.2: UHCI Host Controller
>uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:07.2: irq 11, io base 0x00009800
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:07.3[D] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
>uhci_hcd 0000:00:07.3: UHCI Host Controller
>uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:07.3: irq 11, io base 0x00009c00
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>input: ImPS/2 Generic Wheel Mouse as /class/input/input2
>md: raid1 personality registered for level 1
>raid5: automatically using best checksumming function: pIII_sse
>   pIII_sse  :  3384.000 MB/sec
>raid5: using function: pIII_sse (3384.000 MB/sec)
>raid6: int32x1    437 MB/s
>raid6: int32x2    500 MB/s
>raid6: int32x4    429 MB/s
>raid6: int32x8    445 MB/s
>raid6: mmxx1     1023 MB/s
>raid6: mmxx2     1675 MB/s
>raid6: sse1x1     929 MB/s
>raid6: sse1x2    1578 MB/s
>raid6: using algorithm sse1x2 (1578 MB/s)
>md: raid6 personality registered for level 6
>md: raid5 personality registered for level 5
>md: raid4 personality registered for level 4
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: considering hdk3 ...
>md:  adding hdk3 ...
>md: hdk2 has different UUID to hdk3
>md: hdk1 has different UUID to hdk3
>md:  adding hdi3 ...
>md: hdi2 has different UUID to hdk3
>md: hdi1 has different UUID to hdk3
>md: hdg1 has different UUID to hdk3
>md: hde1 has different UUID to hdk3
>md: created md2
>md: bind<hdi3>
>md: bind<hdk3>
>md: running: <hdk3><hdi3>
>raid1: raid set md2 active with 2 out of 2 mirrors
>md: considering hdk2 ...
>md:  adding hdk2 ...
>md: hdk1 has different UUID to hdk2
>md:  adding hdi2 ...
>md: hdi1 has different UUID to hdk2
>md: hdg1 has different UUID to hdk2
>md: hde1 has different UUID to hdk2
>md: created md1
>md: bind<hdi2>
>md: bind<hdk2>
>md: running: <hdk2><hdi2>
>raid1: raid set md1 active with 2 out of 2 mirrors
>md: considering hdk1 ...
>md:  adding hdk1 ...
>md:  adding hdi1 ...
>md: hdg1 has different UUID to hdk1
>md: hde1 has different UUID to hdk1
>md: created md0
>md: bind<hdi1>
>md: bind<hdk1>
>md: running: <hdk1><hdi1>
>raid1: raid set md0 active with 2 out of 2 mirrors
>md: considering hdg1 ...
>md:  adding hdg1 ...
>md:  adding hde1 ...
>md: created md3
>md: bind<hde1>
>md: bind<hdg1>
>md: running: <hdg1><hde1>
>raid1: raid set md3 active with 2 out of 2 mirrors
>md: ... autorun DONE.
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1181066920.391:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1606 types, 175 bools, 1 sens, 1024 cats
>security:  60 classes, 50500 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev dm-0, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1181066920.632:3): policy loaded auid=4294967295
>input: PC Speaker as /class/input/input3
>parport_pc: VIA 686A/8231 detected
>parport_pc: probing current configuration
>parport_pc: Current parallel port base: 0x378
>parport0: PC-style at 0x378, irq 7 [PCSPP,EPP]
>parport_pc: VIA parallel port: io=0x378, irq=7
>hda: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 10
>ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 10 (level, low) -> IRQ 10
>eth0: RTL8169s/8110s at 0xf889e000, 00:14:bf:5e:07:27, IRQ 10
>r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded
>ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 5
>PCI: setting IRQ 5 as level-triggered
>ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LNKA] -> GSI 5 (level, low) -> IRQ 5
>eth1: RTL8169s/8110s at 0xf891a000, 00:14:bf:5e:07:2d, IRQ 5
>EDAC MC: Ver: 2.0.1 May 16 2007
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input6
>ACPI: Sleep Button (CM) [SLPB]
>No dock devices found.
>ibm_acpi: ec object not found
>md: Autodetecting RAID arrays.
>md: autorun ...
>md: ... autorun DONE.
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on md0, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux: initialized (dev md0, type ext3), uses xattr
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 8323064k swap on /dev/VolGroup00/LogVol00.  Priority:-1 extents:1 across:8323064k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
>r8169: eth0: link up
>r8169: eth0: link up
>r8169: eth1: link up
>audit(1181066959.583:4): audit_pid=2114 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>eth0: no IPv6 routers present
>SCSI subsystem initialized
>Loading iSCSI transport class v2.0-724.
>iscsi: registered transport (tcp)
>iscsi: registered transport (iser)
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>eth1: no IPv6 routers present
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev 0:18, type nfs), uses genfs_contexts
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
>QEMU Accelerator Module version 1.3.0, Copyright (c) 2005-2007 Fabrice Bellard
>KQEMU installed, max_locked_mem=1035604kB.
>atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known.
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
>atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known.
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up
>r8169: eth1: link down
>r8169: eth1: link up

Actions: View

Attachments on bug 234283: 151093 | 151124 | 156275 | 156278 | 156279 | 156414 | 156416