Attachment 156489 Details for Bug 242229 – dmesg output

dmesg output

alan2.txt (text/plain), 21.96 KB, created by Paul Smith on 2007-06-07 17:13:31 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Paul Smith

Created: 2007-06-07 17:13:31 UTC

Size: 21.96 KB

patch

obsolete

>Linux version 2.6.20-1.2952.fc6 (brewbuilder@ls20-bc1-14.build.redhat.com) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-51)) #1 SMP Wed May 16 18:59:18 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f400 end: 000000000009f400 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000f0000 size: 0000000000010000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000003fef0000 end: 000000003fff0000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000003fff0000 size: 0000000000003000 end: 000000003fff3000 type: 4
>copy_e820_map() start: 000000003fff3000 size: 000000000000d000 end: 0000000040000000 type: 3
>copy_e820_map() start: 00000000f0000000 size: 0000000004000000 end: 00000000f4000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000001400000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
> BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
> BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
> BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
> BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
>127MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f5060
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 262128) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   262128
>early_node_map[1] active PFN ranges
>    0:        0 ->   262128
>On node 0 totalpages: 262128
>  DMA zone: 40 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4056 pages, LIFO batch:0
>  Normal zone: 2200 pages used for memmap
>  Normal zone: 223080 pages, LIFO batch:31
>  HighMem zone: 319 pages used for memmap
>  HighMem zone: 32433 pages, LIFO batch:7
>DMI 2.3 present.
>Using APIC driver default
>ACPI: RSDP (v000 GBT                                   ) @ 0x000f69d0
>ACPI: RSDT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff3040
>ACPI: FADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff30c0
>ACPI: MCFG (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6cc0
>ACPI: MADT (v001 GBT    AWRDACPI 0x42302e31 AWRD 0x01010101) @ 0x3fff6c00
>ACPI: DSDT (v001 GBT    AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
>ACPI: PM-Timer IO Port: 0x408
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 15:4 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 15:4 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
>ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000)
>Detected 2813.651 MHz processor.
>Built 1 zonelists.  Total pages: 259569
>Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c07ab000 soft=c078b000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 1029972k/1048512k available (2190k kernel code, 17748k reserved, 1159k data, 236k init, 131008k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc074b000 - 0xc0786000   ( 236 kB)
>      .data : 0xc0623831 - 0xc0745494   (1159 kB)
>      .text : 0xc0400000 - 0xc0623831   (2190 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>Calibrating delay using timer specific routine.. 5630.15 BogoMIPS (lpj=2815079)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU0: Thermal monitoring enabled
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20060707
>CPU0: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c07ac000 soft=c078c000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 5626.34 BogoMIPS (lpj=2813170)
>CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0000641d 00000000 00000001
>monitor/mwait feature present.
>CPU: Trace cache: 12K uops, L1 D cache: 16K
>CPU: L2 cache: 1024K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfebf3ff 20100000 00000000 00003180 0000641d 00000000 00000001
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel P4/Xeon Extended MCE MSRs (24) available
>CPU1: Thermal monitoring enabled
>CPU1: Intel(R) Pentium(R) D CPU 2.80GHz stepping 07
>Total of 2 processors activated (11256.49 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization across 2 CPUs: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=40 bytes
>sizeof(inode)=420 bytes
>sizeof(dentry)=144 bytes
>sizeof(ext3inode)=596 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1408 bytes
>migration_cost=489
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 3.00 entry at 0xfb0e0, last bus=4
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 0480-04bf claimed by ICH6 GPIO
>Boot video device is 0000:01:00.0
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
>ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 16 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:0c: ioport range 0x400-0x4bf could not be reserved
>PCI: Bridge: 0000:00:01.0
>  IO window: disabled.
>  MEM window: e0000000-e2ffffff
>  PREFETCH window: d0000000-dfffffff
>PCI: Bridge: 0000:00:1c.0
>  IO window: 9000-9fff
>  MEM window: disabled.
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1c.2
>  IO window: disabled.
>  MEM window: e4000000-e40fffff
>  PREFETCH window: disabled.
>PCI: Bridge: 0000:00:1e.0
>  IO window: a000-bfff
>  MEM window: e3000000-e3ffffff
>  PREFETCH window: 50000000-500fffff
>ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 9, 2621440 bytes)
>TCP bind hash table entries: 65536 (order: 8, 1310720 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Freeing initrd memory: 2259k freed
>apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
>apm: disabled - APM is not SMP safe.
>audit: initializing netlink socket (disabled)
>audit(1181239293.851:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 299EAE34482B83F9
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:01.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:01.0:pcie00]
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: Processor [CPU0] (supports 2 throttling states)
>ACPI: Processor [CPU1] (supports 2 throttling states)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.101 (c) Dave Jones
>agpgart: Detected an Intel 945G Chipset.
>agpgart: AGP aperture is 256M @ 0x0
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
>00:08: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
>ICH7: IDE controller at PCI slot 0000:00:1f.1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
>ICH7: chipset revision 1
>ICH7: not 100% native mode: will probe irqs later
>    ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
>    ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:pio
>Probing IDE interface ide0...
>hda: Maxtor 6Y080L0, ATA DISK drive
>hdb: ST3120022A, ATA DISK drive
>hda: hw_config=603d
>hda: hw_config=603d
>hdb: hw_config=6d00
>hdb: hw_config=6d00
>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
>Probing IDE interface ide1...
>IT8212: IDE controller at PCI slot 0000:04:06.0
>ACPI: PCI Interrupt 0000:04:06.0[A] -> GSI 22 (level, low) -> IRQ 18
>IT8212: chipset revision 19
>it821x: controller in pass through mode.
>IT8212: 100% native mode on irq 18
>    ide2: BM-DMA at 0xb000-0xb007, BIOS settings: hde:DMA, hdf:pio
>    ide3: BM-DMA at 0xb008-0xb00f, BIOS settings: hdg:pio, hdh:pio
>Probing IDE interface ide2...
>hde: ST3160021A, ATA DISK drive
>hdf: _NEC DVD_RW ND-3520A, ATAPI CD/DVD-ROM drive
>hde: hw_config=607d
>hde: hw_config=607d
>hdf: hw_config=0000
>hdf: hw_config=0000
>ide2 at 0xa010-0xa017,0xa402 on irq 18
>Probing IDE interface ide3...
>Probing IDE interface ide1...
>Probing IDE interface ide3...
>hda: max request size: 128KiB
>hda: Host Protected Area detected.
>	current capacity is 160084415 sectors (81963 MB)
>	native  capacity is 160086528 sectors (81964 MB)
>hda: Host Protected Area disabled.
>hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63<6>hda: hw_config=603d
>, UDMA(100)
>hda: cache flushes supported
> hda: hda1
>hdb: max request size: 512KiB
>hdb: Host Protected Area detected.
>	current capacity is 234439535 sectors (120033 MB)
>	native  capacity is 234441648 sectors (120034 MB)
>hdb: Host Protected Area disabled.
>hdb: 234441648 sectors (120034 MB) w/2048KiB Cache, CHS=16383/255/63<6>hdb: hw_config=6d00
>, UDMA(100)
>hdb: cache flushes supported
> hdb: hdb1 hdb2 hdb3
>hde: max request size: 512KiB
>hde: Host Protected Area detected.
>	current capacity is 312579695 sectors (160040 MB)
>	native  capacity is 312581808 sectors (160041 MB)
>hde: Host Protected Area disabled.
>hde: 312581808 sectors (160041 MB) w/2048KiB Cache, CHS=19457/255/63<6>hde: hw_config=607d
>, UDMA(100)
>hde: cache flushes supported
> hde: hde1 hde2
>ide-floppy driver 0.99.newide
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>ACPI: (supports S0 S1 S4 S5)
>Time: tsc clocksource has been installed.
>Freeing unused kernel memory: 236k freed
>Write protecting the kernel read-only data: 841k
>firmware_class: attempt to set timeout to 10
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000cc00
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000c000
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 17, io base 0x0000c400
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000c800
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>PCI: cache line size of 128 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xe4104000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
>SCSI subsystem initialized
>libata version 2.00 loaded.
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>SELinux:  Disabled at runtime.
>SELinux:  Unregistering netfilter hooks
>audit(1181239310.042:2): selinux=0 auid=4294967295
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
>input: PC Speaker as /class/input/input3
>Floppy drive(s): fd0 is 1.44M
>FDC 0 is a post-1991 82077
>intel_rng: FWH not detected
>tg3.c:v3.72 (January 8, 2007)
>ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:03:00.0 to 64
>parport: PnPBIOS parport detected.
>parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>eth0: Tigon3 [partno(BCM95789) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:14:85:38:2c:93
>eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] Split[0] WireSpeed[1] TSOcap[1] 
>eth0: dma_rwctrl[76180000] dma_mask[64-bit]
>hdf: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
>Uniform CD-ROM driver Revision: 3.20
>iTCO_vendor_support: vendor-support=0
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
>iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0460)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
>loop: loaded (max 8 devices)
>lp0: using parport0 (interrupt-driven).
>lp0: console ready
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
>input: Power Button (FF) as /class/input/input4
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input5
>ACPI: Power Button (CM) [PWRB]
>No dock devices found.
>ibm_acpi: ec object not found
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on dm-0, internal journal
>kjournald starting.  Commit interval 5 seconds
>EXT3 FS on hdb2, internal journal
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on hde2, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
>EXT3 FS on hdb1, internal journal
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>Adding 1048568k swap on /dev/VolGroup00/LogVol01.  Priority:-1 extents:1 across:1048568k
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8191 buckets, 65528 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>tg3: eth0: Link is up at 100 Mbps, full duplex.
>tg3: eth0: Flow control is off for TX and off for RX.
>ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
>vmmon: module license 'unspecified' taints kernel.
>/dev/vmmon[2137]: Module vmmon: registered with major=10 minor=165
>/dev/vmmon[2137]: Module vmmon: initialized
>/dev/vmnet: open called by PID 2164 (vmnet-bridge)
>/dev/vmnet: hub 0 does not exist, allocating memory.
>/dev/vmnet: port on hub 0 successfully opened
>bridge-eth0: enabling the bridge
>bridge-eth0: up
>bridge-eth0: already up
>bridge-eth0: attached
>/dev/vmnet: open called by PID 2178 (vmnet-natd)
>/dev/vmnet: hub 8 does not exist, allocating memory.
>/dev/vmnet: port on hub 8 successfully opened
>eth0: no IPv6 routers present
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.1
>ppdev: user-space parallel port driver
>/dev/vmnet: open called by PID 2591 (vmnet-netifup)
>/dev/vmnet: hub 1 does not exist, allocating memory.
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2592 (vmnet-netifup)
>/dev/vmnet: port on hub 8 successfully opened
>/dev/vmnet: open called by PID 2665 (vmnet-dhcpd)
>/dev/vmnet: port on hub 1 successfully opened
>/dev/vmnet: open called by PID 2666 (vmnet-dhcpd)
>/dev/vmnet: port on hub 8 successfully opened
>vmnet8: no IPv6 routers present
>vmnet1: no IPv6 routers present
>hdf: hw_config=0000
>hdf: hw_config=0000

Actions: View

Attachments on bug 242229: 156488 | 156489 | 160935 | 160936 | 160937 | 164589 | 164590 | 179641 | 194461 | 194471