Attachment 156644 Details for Bug 240116 – dmesg after booting with wireless switched off

dmesg after booting with wireless switched off

dmesgwlan0.txt (text/plain), 32.10 KB, created by Casual J. Programmer on 2007-06-09 11:56:35 UTC

(hide)

Description:

Filename:

MIME Type:

Creator: Casual J. Programmer

Created: 2007-06-09 11:56:35 UTC

Size: 32.10 KB

patch

obsolete

>Linux version 2.6.21-1.3194.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Wed May 23 22:35:01 EDT 2007
>BIOS-provided physical RAM map:
>sanitize start
>sanitize end
>copy_e820_map() start: 0000000000000000 size: 000000000009f800 end: 000000000009f800 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000000009f800 size: 0000000000000800 end: 00000000000a0000 type: 2
>copy_e820_map() start: 00000000000dc000 size: 0000000000024000 end: 0000000000100000 type: 2
>copy_e820_map() start: 0000000000100000 size: 000000007f590000 end: 000000007f690000 type: 1
>copy_e820_map() type is E820_RAM
>copy_e820_map() start: 000000007f690000 size: 0000000000070000 end: 000000007f700000 type: 4
>copy_e820_map() start: 000000007f700000 size: 0000000000900000 end: 0000000080000000 type: 2
>copy_e820_map() start: 00000000e0000000 size: 0000000010000000 end: 00000000f0000000 type: 2
>copy_e820_map() start: 00000000fec00000 size: 0000000000010000 end: 00000000fec10000 type: 2
>copy_e820_map() start: 00000000fed00000 size: 0000000000000400 end: 00000000fed00400 type: 2
>copy_e820_map() start: 00000000fed14000 size: 0000000000006000 end: 00000000fed1a000 type: 2
>copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 end: 00000000fed90000 type: 2
>copy_e820_map() start: 00000000fee00000 size: 0000000000001000 end: 00000000fee01000 type: 2
>copy_e820_map() start: 00000000ff000000 size: 0000000001000000 end: 0000000100000000 type: 2
> BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
> BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
> BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
> BIOS-e820: 0000000000100000 - 000000007f690000 (usable)
> BIOS-e820: 000000007f690000 - 000000007f700000 (ACPI NVS)
> BIOS-e820: 000000007f700000 - 0000000080000000 (reserved)
> BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
> BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
> BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
> BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
> BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
> BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
> BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
>1142MB HIGHMEM available.
>896MB LOWMEM available.
>found SMP MP-table at 000f7640
>Using x86 segment limits to approximate NX protection
>Entering add_active_range(0, 0, 521872) 0 entries of 256 used
>Zone PFN ranges:
>  DMA             0 ->     4096
>  Normal       4096 ->   229376
>  HighMem    229376 ->   521872
>early_node_map[1] active PFN ranges
>    0:        0 ->   521872
>On node 0 totalpages: 521872
>  DMA zone: 32 pages used for memmap
>  DMA zone: 0 pages reserved
>  DMA zone: 4064 pages, LIFO batch:0
>  Normal zone: 1760 pages used for memmap
>  Normal zone: 223520 pages, LIFO batch:31
>  HighMem zone: 2285 pages used for memmap
>  HighMem zone: 290211 pages, LIFO batch:31
>DMI present.
>Using APIC driver default
>ACPI: RSDP 000F7500, 0014 (r0 PTLTD )
>ACPI: RSDT 7F691C1A, 0044 (r1 FSC    PC       20070126  LTP        0)
>ACPI: FACP 7F697CAA, 0074 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI Warning (tbfadt-0360): Ignoring BIOS FADT r1 C-state control [20070126]
>ACPI: DSDT 7F692626, 5684 (r1 FUJ___ DW1_____ 20070126 MSFT  100000E)
>ACPI: FACS 7F698FC0, 0040
>ACPI: APIC 7F697D1E, 0068 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: HPET 7F697D86, 0038 (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: MCFG 7F697DBE, 003C (r1 FUJ___ DW1_____ 20070126 LOHR       5A)
>ACPI: APIC 7F697DFA, 0068 (r1 FUJ___ DW1_____ 20070126  LTP        0)
>ACPI: BOOT 7F697E62, 0028 (r1 FUJ___ DW1_____ 20070126  LTP        1)
>ACPI: SLIC 7F697E8A, 0176 (r1 FSC    PC       20070126  LTP        0)
>ACPI: SSDT 7F691C5E, 0500 (r1  PmRef    CpuPm     3000 INTL 20050228)
>ACPI: BIOS bug: multiple APIC/MADT found, using 0
>ACPI: If "acpi_apic_instance=2" works better, notify linux-acpi@vger.kernel.org
>ACPI: PM-Timer IO Port: 0x1008
>ACPI: Local APIC address 0xfee00000
>ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
>Processor #0 6:14 APIC version 20
>ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
>Processor #1 6:14 APIC version 20
>ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
>ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
>ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
>IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
>ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
>ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
>ACPI: IRQ0 used by override.
>ACPI: IRQ2 used by override.
>ACPI: IRQ9 used by override.
>Enabling APIC mode:  Flat.  Using 1 I/O APICs
>ACPI: HPET id: 0x8086a201 base: 0xfed00000
>Using ACPI (MADT) for SMP configuration information
>Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
>Built 1 zonelists.  Total pages: 517795
>Kernel command line: ro root=LABEL=/1 rhgb quiet
>mapped APIC to ffffd000 (fee00000)
>mapped IOAPIC to ffffc000 (fec00000)
>Enabling fast FPU save and restore... done.
>Enabling unmasked SIMD FPU exception support... done.
>Initializing CPU#0
>CPU 0 irqstacks, hard=c077c000 soft=c075c000
>PID hash table entries: 4096 (order: 12, 16384 bytes)
>Detected 1995.803 MHz processor.
>Console: colour VGA+ 80x25
>Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
>Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
>Memory: 2061888k/2087488k available (2066k kernel code, 24300k reserved, 1092k data, 240k init, 1169984k highmem)
>virtual kernel memory layout:
>    fixmap  : 0xffc56000 - 0xfffff000   (3748 kB)
>    pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
>    vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
>    lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
>      .init : 0xc071b000 - 0xc0757000   ( 240 kB)
>      .data : 0xc0604a4a - 0xc0715cb4   (1092 kB)
>      .text : 0xc0400000 - 0xc0604a4a   (2066 kB)
>Checking if this processor honours the WP bit even in supervisor mode... Ok.
>hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
>hpet0: 3 64-bit timers, 14318180 Hz
>Calibrating delay using timer specific routine.. 3994.90 BogoMIPS (lpj=1997453)
>Security Framework v1.0.0 initialized
>SELinux:  Initializing.
>SELinux:  Starting in permissive mode
>selinux_register_security:  Registering secondary module capability
>Capability LSM initialized as secondary
>Mount-cache hash table entries: 512
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>using mwait in idle threads.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 0
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#0.
>Checking 'hlt' instruction... OK.
>SMP alternatives: switching to UP code
>ACPI: Core revision 20070126
>CPU0: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>SMP alternatives: switching to SMP code
>Booting processor 1/1 eip 3000
>CPU 1 irqstacks, hard=c077d000 soft=c075d000
>Initializing CPU#1
>Calibrating delay using timer specific routine.. 3991.49 BogoMIPS (lpj=1995745)
>CPU: After generic identify, caps: bfe9fbff 00100000 00000000 00000000 0000c1a9 00000000 00000000
>monitor/mwait feature present.
>CPU: L1 I cache: 32K, L1 D cache: 32K
>CPU: L2 cache: 2048K
>CPU: Physical Processor ID: 0
>CPU: Processor Core ID: 1
>CPU: After all inits, caps: bfe9f3ff 00100000 00000000 00002940 0000c1a9 00000000 00000000
>Intel machine check architecture supported.
>Intel machine check reporting enabled on CPU#1.
>CPU1: Intel Genuine Intel(R) CPU           T2500  @ 2.00GHz stepping 08
>Total of 2 processors activated (7986.39 BogoMIPS).
>ENABLING IO-APIC IRQs
>..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
>checking TSC synchronization [CPU#0 -> CPU#1]: passed.
>Brought up 2 CPUs
>sizeof(vma)=84 bytes
>sizeof(page)=32 bytes
>sizeof(inode)=336 bytes
>sizeof(dentry)=132 bytes
>sizeof(ext3inode)=488 bytes
>sizeof(buffer_head)=56 bytes
>sizeof(skbuff)=176 bytes
>sizeof(task_struct)=1376 bytes
>migration_cost=51
>Time: 12:29:06  Date: 05/09/107
>NET: Registered protocol family 16
>ACPI: bus type pci registered
>PCI: PCI BIOS revision 2.10 entry at 0xfd88b, last bus=7
>PCI: Using configuration type 1
>Setting up standard PCI resources
>ACPI: Interpreter enabled
>ACPI: (supports S0 S3 S4 S5)
>ACPI: Using IOAPIC for interrupt routing
>ACPI: PCI Root Bridge [PCI0] (0000:00)
>PCI: Probing PCI hardware (bus 00)
>Boot video device is 0000:00:02.0
>PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
>PCI quirk: region 1180-11bf claimed by ICH6 GPIO
>PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, disabling
>PCI: Transparent bridge - 0000:00:1e.0
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
>ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
>ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *7 11 12 14 15)
>ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
>ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
>ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
>ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15)
>Linux Plug and Play Support v0.97 (c) Adam Belay
>pnp: PnP ACPI init
>pnp: PnP ACPI: found 9 devices
>usbcore: registered new interface driver usbfs
>usbcore: registered new interface driver hub
>usbcore: registered new device driver usb
>PCI: Using ACPI for IRQ routing
>PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
>NetLabel: Initializing
>NetLabel:  domain hash size = 128
>NetLabel:  protocols = UNLABELED CIPSOv4
>NetLabel:  unlabeled traffic allowed by default
>pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be reserved
>pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be reserved
>pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be reserved
>pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be reserved
>Time: tsc clocksource has been installed.
>PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
>PCI: Bridge: 0000:00:1c.0
>  IO window: 2000-2fff
>  MEM window: da000000-dbffffff
>  PREFETCH window: d4000000-d5ffffff
>PCI: Bridge: 0000:00:1c.1
>  IO window: 3000-3fff
>  MEM window: d6000000-d7ffffff
>  PREFETCH window: d0000000-d1ffffff
>PCI: Bridge: 0000:00:1c.2
>  IO window: 4000-4fff
>  MEM window: d8000000-d9ffffff
>  PREFETCH window: d2000000-d3ffffff
>PCI: Bridge: 0000:00:1e.0
>  IO window: 5000-5fff
>  MEM window: dc000000-dc0fffff
>  PREFETCH window: disabled.
>ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 16
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
>PCI: Setting latency timer of device 0000:00:1e.0 to 64
>NET: Registered protocol family 2
>IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
>TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
>TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
>TCP: Hash tables configured (established 131072 bind 65536)
>TCP reno registered
>checking if image is initramfs... it is
>Switched to high resolution mode on CPU 1
>Switched to high resolution mode on CPU 0
>Freeing initrd memory: 2816k freed
>Simple Boot Flag value 0x82 read from CMOS RAM was invalid
>Simple Boot Flag at 0x36 set to 0x1
>apm: BIOS not found.
>audit: initializing netlink socket (disabled)
>audit(1181392146.259:1): initialized
>highmem bounce pool size: 64 pages
>Total HugeTLB memory allocated, 0
>VFS: Disk quotas dquot_6.5.1
>Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
>SELinux:  Registering netfilter hooks
>ksign: Installing public key data
>Loading keyring
>- Added public key 65F8109C338BBD41
>- User ID: Red Hat, Inc. (Kernel Module GPG key)
>io scheduler noop registered
>io scheduler anticipatory registered
>io scheduler deadline registered
>io scheduler cfq registered (default)
>PCI: Setting latency timer of device 0000:00:1c.0 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.0:pcie00]
>Allocate Port Service[0000:00:1c.0:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.1 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.1:pcie00]
>Allocate Port Service[0000:00:1c.1:pcie02]
>PCI: Setting latency timer of device 0000:00:1c.2 to 64
>assign_interrupt_mode Found MSI capability
>Allocate Port Service[0000:00:1c.2:pcie00]
>Allocate Port Service[0000:00:1c.2:pcie02]
>pci_hotplug: PCI Hot Plug PCI Core version: 0.5
>ACPI: SSDT 7F6923B3, 01EA (r1  PmRef  Cpu0Ist     3000 INTL 20050228)
>ACPI: SSDT 7F69215E, 01D0 (r1  PmRef  Cpu0Cst     3001 INTL 20050228)
>ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU0] (supports 8 throttling states)
>ACPI: SSDT 7F69259D, 0089 (r1  PmRef  Cpu1Ist     3000 INTL 20050228)
>ACPI: SSDT 7F69232E, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20050228)
>ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
>ACPI: Processor [CPU1] (supports 8 throttling states)
>Time: hpet clocksource has been installed.
>ACPI: Thermal Zone [TZ00] (55 C)
>isapnp: Scanning for PnP cards...
>isapnp: No Plug & Play device found
>Real Time Clock Driver v1.12ac
>hpet_resources: 0xfed00000 is busy
>Non-volatile memory driver v1.2
>Linux agpgart interface v0.102 (c) Dave Jones
>agpgart: Detected an Intel 945GM Chipset.
>agpgart: Detected 7932K stolen memory.
>agpgart: AGP aperture is 256M @ 0xc0000000
>Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
>RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
>input: Macintosh mouse button emulation as /class/input/input0
>usbcore: registered new interface driver libusual
>usbcore: registered new interface driver hiddev
>usbcore: registered new interface driver usbhid
>drivers/usb/input/hid-core.c: v2.6:USB HID core driver
>PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2F] at 0x60,0x64 irq 1,12
>serio: i8042 KBD port at 0x60,0x64 irq 1
>serio: i8042 AUX port at 0x60,0x64 irq 12
>mice: PS/2 mouse device common for all mice
>input: AT Translated Set 2 keyboard as /class/input/input1
>TCP bic registered
>Initializing XFRM netlink socket
>NET: Registered protocol family 1
>NET: Registered protocol family 17
>Using IPI No-Shortcut mode
>  Magic number: 11:871:480
>drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
>Freeing unused kernel memory: 240k freed
>Write protecting the kernel read-only data: 820k
>USB Universal Host Controller Interface driver v3.0
>ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.0 to 64
>uhci_hcd 0000:00:1d.0: UHCI Host Controller
>uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
>uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
>usb usb1: configuration #1 chosen from 1 choice
>hub 1-0:1.0: USB hub found
>hub 1-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 20
>PCI: Setting latency timer of device 0000:00:1d.1 to 64
>uhci_hcd 0000:00:1d.1: UHCI Host Controller
>uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
>uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
>usb usb2: configuration #1 chosen from 1 choice
>hub 2-0:1.0: USB hub found
>hub 2-0:1.0: 2 ports detected
>ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1d.2 to 64
>uhci_hcd 0000:00:1d.2: UHCI Host Controller
>uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
>uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
>usb usb3: configuration #1 chosen from 1 choice
>hub 3-0:1.0: USB hub found
>hub 3-0:1.0: 2 ports detected
>Clocksource tsc unstable (delta = -386020659 ns)
>Synaptics Touchpad, model: 1, fw: 5.10, id: 0x258eb1, caps: 0xa04713/0x0
>ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:00:1d.3 to 64
>uhci_hcd 0000:00:1d.3: UHCI Host Controller
>uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
>uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
>usb usb4: configuration #1 chosen from 1 choice
>hub 4-0:1.0: USB hub found
>hub 4-0:1.0: 2 ports detected
>input: SynPS/2 Synaptics TouchPad as /class/input/input2
>usb 2-1: new low speed USB device using uhci_hcd and address 2
>ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 19
>PCI: Setting latency timer of device 0000:00:1d.7 to 64
>ehci_hcd 0000:00:1d.7: EHCI Host Controller
>ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
>ehci_hcd 0000:00:1d.7: debug port 1
>PCI: cache line size of 32 is not supported by device 0000:00:1d.7
>ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000
>ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
>usb usb5: configuration #1 chosen from 1 choice
>hub 5-0:1.0: USB hub found
>hub 5-0:1.0: 8 ports detected
>SCSI subsystem initialized
>libata version 2.20 loaded.
>ahci 0000:00:1f.2: version 2.1
>ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 20
>usb 2-1: new low speed USB device using uhci_hcd and address 3
>usb 2-1: configuration #1 chosen from 1 choice
>input: Microsoft Microsoft 3-Button Mouse with IntelliEye? as /class/input/input3
>input: USB HID v1.00 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye?] on usb-0000:00:1d.1-1
>usb 2-2: new full speed USB device using uhci_hcd and address 4
>PCI: Setting latency timer of device 0000:00:1f.2 to 64
>ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
>ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
>ata1: SATA max UDMA/133 cmd 0xf8840500 ctl 0x00000000 bmdma 0x00000000 irq 20
>ata2: SATA max UDMA/133 cmd 0xf8840580 ctl 0x00000000 bmdma 0x00000000 irq 20
>ata3: SATA max UDMA/133 cmd 0xf8840600 ctl 0x00000000 bmdma 0x00000000 irq 20
>ata4: SATA max UDMA/133 cmd 0xf8840680 ctl 0x00000000 bmdma 0x00000000 irq 20
>scsi0 : ahci
>usb 2-2: configuration #1 chosen from 1 choice
>hub 2-2:1.0: USB hub found
>hub 2-2:1.0: 4 ports detected
>usb 2-2.2: new full speed USB device using uhci_hcd and address 5
>ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: ATA-7: FUJITSU MHV2080BH, 00000025, max UDMA/100
>ata1.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 31/32)
>ata1.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors = 156301488
>ata1.00: configured for UDMA/100
>scsi1 : ahci
>usb 2-2.2: configuration #1 chosen from 1 choice
>usb 2-2.3: new full speed USB device using uhci_hcd and address 6
>ata2: SATA link down (SStatus 0 SControl 0)
>scsi2 : ahci
>usb 2-2.3: configuration #1 chosen from 1 choice
>ata3: SATA link down (SStatus 0 SControl 300)
>scsi3 : ahci
>ata4: SATA link down (SStatus 0 SControl 0)
>scsi 0:0:0:0: Direct-Access     ATA      FUJITSU MHV2080B 0000 PQ: 0 ANSI: 5
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
>SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
>sda: Write Protect is off
>sda: Mode Sense: 00 3a 00 00
>SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
> sda: sda1 sda2 sda3 sda4
>sd 0:0:0:0: Attached scsi disk sda
>ata_piix 0000:00:1f.1: version 2.10ac1
>ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
>PCI: Setting latency timer of device 0000:00:1f.1 to 64
>ata5: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011810 irq 14
>ata6: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011818 irq 15
>scsi4 : ata_piix
>ata5.00: ATAPI, max UDMA/33
>ata5.00: configured for UDMA/33
>scsi5 : ata_piix
>ata6: port disabled. ignoring.
>scsi 4:0:0:0: CD-ROM            _NEC     DVD_RW ND-6750A  2.42 PQ: 0 ANSI: 5
>EXT3-fs: INFO: recovery required on readonly filesystem.
>EXT3-fs: write access will be enabled during recovery.
>kjournald starting.  Commit interval 5 seconds
>EXT3-fs: recovery complete.
>EXT3-fs: mounted filesystem with ordered data mode.
>audit(1181392161.535:2): enforcing=1 old_enforcing=0 auid=4294967295
>security:  3 users, 6 roles, 1817 types, 79 bools, 1 sens, 1024 cats
>security:  60 classes, 67748 rules
>SELinux:  Completing initialization.
>SELinux:  Setting up existing superblocks.
>SELinux: initialized (dev sda3, type ext3), uses xattr
>SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
>SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
>SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
>SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
>SELinux: initialized (dev devpts, type devpts), uses transition SIDs
>SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
>SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
>SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
>SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
>SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts
>SELinux: initialized (dev proc, type proc), uses genfs_contexts
>SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
>SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
>SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
>audit(1181392162.035:3): policy loaded auid=4294967295
>sd 0:0:0:0: Attached scsi generic sg0 type 0
>scsi 4:0:0:0: Attached scsi generic sg1 type 5
>input: PC Speaker as /class/input/input4
>intel_rng: FWH not detected
>sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
>Uniform CD-ROM driver Revision: 3.20
>sr 4:0:0:0: Attached scsi CD-ROM sr0
>iTCO_vendor_support: vendor-support=0
>ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 20
>iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
>iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
>iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
>sdhci: Secure Digital Host Controller Interface driver
>sdhci: Copyright(c) Pierre Ossman
>sdhci: SDHCI controller found at 0000:07:09.1 [1180:0822] (rev 19)
>PCI: Enabling device 0000:07:09.1 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:09.1[B] -> GSI 21 (level, low) -> IRQ 21
>PCI: Setting latency timer of device 0000:07:09.1 to 64
>mmc0: SDHCI at 0xdc001800 irq 21 DMA
>PCI: Enabling device 0000:07:09.0 (0000 -> 0002)
>ACPI: PCI Interrupt 0000:07:09.0[A] -> GSI 20 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:07:09.0 to 64
>drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 6 if 0 alt 0 proto 2 vid 0x04A9 pid 0x1093
>usbcore: registered new interface driver usblp
>drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
>mmcblk0: mmc0:b368       4020224KiB 
> mmcblk0: unknown partition table
>fw_ohci: Added fw-ohci device 0000:07:09.0, OHCI version 1.0
>e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
>e100: Copyright(c) 1999-2006 Intel Corporation
>ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> IRQ 22
>PCI: Setting latency timer of device 0000:07:08.0 to 64
>usbcore: registered new interface driver usbserial
>drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
>e100: eth0: e100_probe: addr 0xdc000000, irq 22, MAC addr 00:16:36:34:25:66
>usbcore: registered new interface driver usbserial_generic
>drivers/usb/serial/usb-serial.c: USB Serial Driver core
>drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
>pl2303 2-2.2:1.0: pl2303 converter detected
>usb 2-2.2: pl2303 converter now attached to ttyUSB0
>usbcore: registered new interface driver pl2303
>drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.21kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>iwl3945: MAC is in deep sleep!
>iwl3945: ipw going down 
>iwl3945: MAC is in deep sleep!
>iwl3945: MAC is in deep sleep!
>iwl3945: MAC is in deep sleep!
>fw_core: created new fw device fw0 (0 config rom retries)
>ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
>PCI: Setting latency timer of device 0000:00:1b.0 to 64
>loop: loaded (max 8 devices)
>floppy0: no floppy controllers found
>lp: driver loaded but no devices found
>sonypi: Sony Programmable I/O Controller Driver v1.26.
>SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts
>NET: Registered protocol family 10
>lo: Disabled Privacy Extensions
>Mobile IPv6
>ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 17
>BUG: warning at kernel/softirq.c:138/local_bh_enable() (Not tainted)
> [<c042b0cf>] local_bh_enable+0x45/0x92
> [<c06002bd>] cond_resched_softirq+0x2c/0x42
> [<c059adf3>] release_sock+0x4f/0x9d
> [<c05c670d>] tcp_sendmsg+0x90b/0x9f9
> [<c05dec95>] inet_sendmsg+0x3b/0x45
> [<c0598731>] sock_aio_write+0xf6/0x102
> [<c04753ea>] do_sync_readv_writev+0xc1/0xfe
> [<c0436e71>] autoremove_wake_function+0x0/0x35
> [<c0475b33>] do_readv_writev+0xbc/0x187
> [<c059863b>] sock_aio_write+0x0/0x102
> [<c0475c3b>] vfs_writev+0x3d/0x48
> [<c04760a4>] sys_writev+0x41/0x95
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>ACPI: AC Adapter [ACAD] (on-line)
>ACPI: Battery Slot [BAT1] (battery present)
>ACPI: Error installing notify handler
>Device 'dock.0' does not have a release() function, it is broken and must be fixed.
>BUG: warning at drivers/base/core.c:109/device_release() (Not tainted)
> [<c04e33be>] kobject_cleanup+0x3e/0x55
> [<c04e33d5>] kobject_release+0x0/0x8
> [<c04e3f21>] kref_put+0x72/0x7f
> [<c0550a04>] device_del+0x199/0x1ad
> [<f8b9b6d4>] find_dock+0x1da/0x204 [dock]
> [<c0517fc1>] acpi_ns_walk_namespace+0x101/0x11c
> [<c05167bc>] acpi_walk_namespace+0x57/0x74
> [<f8b9b4fa>] find_dock+0x0/0x204 [dock]
> [<f884203c>] dock_init+0x3c/0x55 [dock]
> [<f8b9b4fa>] find_dock+0x0/0x204 [dock]
> [<c04432e4>] sys_init_module+0x16c3/0x17fa
> [<c04755f8>] do_sync_read+0xc7/0x10a
> [<c05507e5>] device_remove_file+0x0/0x25
> [<c0475e85>] vfs_read+0xa6/0x152
> [<c0404f70>] syscall_call+0x7/0xb
> =======================
>No dock devices found.
>input: Power Button (FF) as /class/input/input5
>ACPI: Power Button (FF) [PWRF]
>input: Power Button (CM) as /class/input/input6
>ACPI: Power Button (CM) [PWRB]
>input: Sleep Button (CM) as /class/input/input7
>ACPI: Sleep Button (CM) [SLPB]
>input: Lid Switch as /class/input/input8
>ACPI: Lid Switch [LID]
>ibm_acpi: ec object not found
>ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
>ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
>device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com
>device-mapper: multipath: version 1.0.5 loaded
>EXT3 FS on sda3, internal journal
>SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
>Adding 4192956k swap on /dev/sda4.  Priority:-1 extents:1 across:4192956k
>SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
>IA-32 Microcode Update Driver: v1.14a <tigran@aivazian.fsnet.co.uk>
>ip6_tables: (C) 2000-2006 Netfilter Core Team
>ip_tables: (C) 2000-2006 Netfilter Core Team
>Netfilter messages via NETLINK v0.30.
>nf_conntrack version 0.5.0 (8192 buckets, 65536 max)
>ADDRCONF(NETDEV_UP): eth0: link is not ready
>audit(1181384994.561:4): audit_pid=2149 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
>SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
>Bluetooth: Core ver 2.11
>NET: Registered protocol family 31
>Bluetooth: HCI device and connection manager initialized
>Bluetooth: HCI socket layer initialized
>Bluetooth: L2CAP ver 2.8
>Bluetooth: L2CAP socket layer initialized
>Bluetooth: RFCOMM socket layer initialized
>Bluetooth: RFCOMM TTY layer initialized
>Bluetooth: RFCOMM ver 1.8
>Bluetooth: HIDP (Human Interface Emulation) ver 1.2
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
>[drm] Initialized drm 1.1.0 20060810
>[drm] Initialized i915 1.6.0 20060119 on minor 0
>ISO 9660 Extensions: Microsoft Joliet Level 3
>ISO 9660 Extensions: RRIP_1991A
>SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts
>atkbd.c: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>usb 3-2: new full speed USB device using uhci_hcd and address 2
>usb 3-2: configuration #1 chosen from 1 choice
>Bluetooth: HCI USB driver ver 2.9
>usbcore: registered new interface driver hci_usb
>iwl3945: ipw going down 
>ACPI: PCI interrupt for device 0000:01:00.0 disabled
>iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 0.0.21kd
>iwl3945: Copyright(c) 2003-2007 Intel Corporation
>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 17
>PCI: Setting latency timer of device 0000:01:00.0 to 64
>iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
>iwl3945: Channel 14 [2.4GHz] is Tx only -- skipping.
>iwl3945: Channel 183 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 184 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 185 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 187 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 188 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 189 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 192 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 196 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 7 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 8 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 11 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 12 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 16 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 145 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 149 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 153 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 157 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 161 [5.2GHz] is Tx only -- skipping.
>iwl3945: Channel 165 [5.2GHz] is Tx only -- skipping.
>iwl3945: Tunable channels: 13 802.11bg, 23 802.11a channels
>wmaster0: Selected rate control algorithm 'simple'
>iwl3945: Radio Frequency Kill Switch is On:
>Kill switch must be turned off for wireless networking to work.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf3 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e073 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf3 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e073 <keycode>' to make it known.
>iwl3945: Error sending REPLY_TX_PWR_TABLE_CMD: time out after 500ms.
>atkbd.c: Unknown key pressed (translated set 2, code 0xf3 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e073 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xf3 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e073 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>usb 3-2: USB disconnect, address 2
>atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>atkbd.c: Unknown key pressed (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>atkbd.c: Unknown key released (translated set 2, code 0xe1 on isa0060/serio0).
>atkbd.c: Use 'setkeycodes e061 <keycode>' to make it known.
>usb 3-2: new full speed USB device using uhci_hcd and address 3
>usb 3-2: configuration #1 chosen from 1 choice

Actions: View

Attachments on bug 240116: 156568 | 156569 | 156643 | 156644 | 157855